Ubuntu Installation :: Dual Installation - Reinstallation ?
Jan 31, 2011
Regarding dual boot and GRUB. Here is my situation: Year ago I bought computer i7-920 6G one HDD, I installed windows 7 on it. than I bought second HDD, placed it into master 2 position and installed ubuntu on it. after installation of ubuntu I got GRUB loader as first thing when I start computer (I don't remember the particular settings during installation) So far so good now is the question - is GRUB on the first or on the second HDD? can I swap both harddrives so the ubuntu one will be in master 1 position? I'm asking because my windows 7 is now wrecked (can't even get it to safe mode) and I need to clean the first HDD and reinstall windows.
View 2 Replies
ADVERTISEMENT
Apr 7, 2011
I installed Ubuntu Lucid Lynx a while ago. but then upgraded it to 10.10
I don't have the CD with me right now and i need to fix some mistakes of mine (being a n00b to ubuntu) urgently i.e. i can't wait for morning. Is there anyway i can rollback to the time when my ubuntu installation was in mint condition?
One more thing. Let me tell you my mistake. Almost a month ago i installed Apache2 on my Laptop (for LAMP). and now i have to install Apache Tomcat for JSP development. but the problem is that the files made by Apache2 and the PHP5 installation i made are not removed with
Code:
Code:
So now the apache2 files are superseding the Apache Tomcat. hence i cannot distuinguish between apache2 or apache tomcat when i goto:
Code:
So if anyone has a way of ridding my laptop of this disease without complete overhaul, please post your replies here.
Until then, I will have to defect back to Windows.
View 1 Replies
View Related
Apr 9, 2011
I'm using ubuntu 10.04 and it seems that I forgot to set up a swap partition when I installed my system. So, I can't install hibernate, and I don't think I have any virtual memory any more.
I know that I can always set up a swap file to play the same role, but since swap file is not contiguously stored on hard disk, the performance is expected to be worse than a swap partition.
So, how can I add a swap partition and make my system boot with it every time from now on? I have unused space on my hard disk, and re-installation is NOT an option.
View 3 Replies
View Related
May 10, 2010
I "USED" to have a dual booting pc...with Windows 7 & ubuntu 10.04.(NOT Wubi) 2 Days back my windows 7 crashed...so i had to reinstall windows 7. But after reinstallation there was no option to boot into ubuntu 10.04. My system automatically boots into windows 7. I need to fix my ubuntu installation so that i get an option to select which OS to boot...at the startup.
View 9 Replies
View Related
Jan 29, 2009
I can not boot into F9 after the reinstallation of Window XP. So I booted from the F9 live cd and tried to repair the grub. Here is what I did in the terminal:
Code:
[fedora@localhost ~]$ grub
bash: grub: command not found
[fedora@localhost ~]$ whereis grub
grub: /sbin/grub /usr/share/grub /usr/share/man/man8/grub.8.gz
[fedora@localhost ~]$ su
[root@localhost fedora]# /sbin/grub
[Code]...
View 4 Replies
View Related
Nov 19, 2010
had a dual boot system with openSuse 11.1 and Windows XP working OK - Linux boot loader was where OS selection was made (openSuse was installed after Windows) Last week I had to reinstall Windows and this removed the Linux loader from MBR and Windows booted automatically. I wanted the Linux boot loader back,checked the threads about boot loader restoration and did the following:
- downloaded Knoppix 6.2.1 ISO and burned to CD
- booted with CD
- opened terminal with root privileges and typed:
grub (ENTER)
grub> find /boot/grub/stage1 (ENTER)
> (hd0,2)
grub> root (hd0,2) (ENTER)
>Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0) (ENTER)
setup was successful (no error messages)
Now when booting, i have an error that root (0,3) can not be mounted and "Press any key to continue"??? When hitting any key I see that there is GRUB there with all entries as in original state (Suse 11.1 and Windows) but only Windows can be booted. Then I downloaded live eval of openSuse 11.1 and did the same (booted from CD and run same commands from terminal as root) - again no errors but still "root (0,3)" can not be mounted..
View 9 Replies
View Related
May 24, 2010
Every tutorial I've seen on installing a dual boot environment assumes you already have an installed OS (usually Windows). My wife's XP system is pretty hosed, and she's been interested in Ubuntu. Because she's ripe for an XP re-install anyway, I'm planning on backing up her data, completely wiping her hard drive, and installing a dual-boot Windows-XP/Ubuntu environment. Any good step-by-steps for this, with good hints on how to partition, etc.?
If not, my plan B is to reformat and install a basic XP system, and then follow one of the tutorials for going dual-boot over an existing install. Does that make sense? I should mention, I've used Linux for years as a user on my ISP, but have only been using Linux on a home system for a couple months; so I'm fairly new to the install and administer side.
View 7 Replies
View Related
Dec 30, 2010
I have a MSI a6000 Laptop (that has given me a lot of problems installing Ubuntu.
I finally had to run Ubuntu from a CD in nomodeset
Then when I go to install Ubuntu the only options it gives (regarding my harddrive) are to format my whole hardrive or do the partitioning. I have seen screenshots though where there is a third option on the same page to install ubuntu alongside a prior OS and dual boot.
Does anyone know why the "install alongside a prior OS (dual boot)" option doesn't show up?
View 5 Replies
View Related
Feb 4, 2010
After having tested Ubuttu 9.10 on a VM with Win XP Pro as host and running both Ubuntu 9.10 and 8.04 from a CD/CDR drive I decided to do an installation of 8.04 on a separate HD and import files.Installation seemed to work OK, but on reboot: no menu was shown to choose OS and the machine booted directly into Windows.Tried to boot directly from the "Ubuntu" HD in the BIOS boot menu and get the message "MBR error" full stop literally.The Ubuntu hard drive is no longer recognised in Windows , can't be acessed from the DOS prompt and obviously cannot be reformatted from there.Just for the record, I'm not totally excluding operator error from the cause
View 9 Replies
View Related
Jun 7, 2010
I am trying to install Ubuntu 10.04 LTS on a Windows XP Media Centre Edition system.On the Step 4 of the installation which usually gives you the option to partition the disk but it only gives me the option to Erase the entire disk or specify partition manually, although this also doesn't allow anything other than totally erasing the disk. I'd ideally like to keep my Windows and I have installed Ubuntu before (but 9.10) on a different system.
View 9 Replies
View Related
Oct 5, 2010
Ive managed to get myself in a bit of a hole through fears of destroying my WinXP on a new dual boot installation. I�ve been using Ubuntu (10.04 lts) alone on an old machine which died, so I thought I�d just move the hdd to my main machine & dual boot it with XP.
I booted from the 10.04 lts CD to set this up, I let it do as it suggested & assumed it would see the existing Ubuntu installation & modify it to dual boot with Win XP. Which it did except I now have two instances of 10.04 on the second hdd as it added a second partition for the new. Leaving the already installed 10.04 alone. I saw no options other than the advanced partitioning which I did not look at.
How please can I correct this & go back to having just one instance of 10.04 on the Ubuntu disk to dual boot to � I am sure there must be an easy way. I have nothing on the Ubuntu disk I need to preserve. I know nothing about Linux command line.
View 9 Replies
View Related
Nov 2, 2010
I'd just like to express my disappointment in the new installation manager you have, it is a massive downgrade from the previous ones. When I tried installing via your new manager it presented me with a few problems, first of all it would not correctly detect my partitions, I have 2 separate partitions, my windows and what acts as my play around, I install Linux distros, play around and install another when I get bored or run into bugs, so this is not my first time installing anything. When I tried installing I assumed the option to "Install alongside other OS'" would work perfectly, but instead of asking to remove what was openSUSE (which is what it would do in previous versions and other installation managers)and just install Ubuntu on top, instead it wanted to resize my windows partition and install next to that, this is obviously not a good idea because it would cause a lot of problems for windows, and windows wouldn't boot without me running a repair. So I tried using GParted to delete my openSUSE installation. I then tried to install the same way, but with no luck, it; didn't see the free space. So I manually set a swap of 2GB and the rest of the partition as ext4 starting in "/" (This is the only way it would work and have no idea what it means). Ubuntu installed and works... however.
I am also disappointed in the lack of control over the installation when it finally happens. First off, it starts to install even before you have selected where you are, with no option to stop, or pause. Second, it does not ask whether you actually want GRUB, which OS is going to be booted by default and how long it should display options before booting. Third, it assumes you want the root password to be the same as the user password and has no option to add more than one user or set a separate root password.
This installer is an insult of peoples intelligence. I'm a windows guy, but not that stupid. There is making it easy, and making it so damn easy no one ever learns anything, because it's all point-and-click.
View 9 Replies
View Related
Jan 2, 2011
I decided to install a dual boot on my Sony Vaio recently.Installation has not gone well.I attempted to install latest version desktop 10.10 with a CD. I was able to choose a language, then screen went black. I heard some music after a few minutes but no video. I was eventually able to boot the system several times under recovery mode. Several other forums and posts suggest that the problem was with my Vaio graphics card (NVIDIA GeForce GT 230M).After the initial dual boot screen, where I'm able to choose operating system, if I choose either Ubuntu or Ubuntu safe mode a bunch of text scrolls by and ends with.
View 1 Replies
View Related
Dec 11, 2010
I'm a complete an utter newbie on this forum, and indeed to linux/ubuntu in general so pardon me in advance if some of my question makes no sense/sounds silly/makes you want to exterminate all noobs. Basically, I've had bad experiences (i.e. had to use my recovery system) trying to install a dual boot system with OpenSuse and want to get some sound advice before I proceed with installing Ubuntu, instead of having to go through the agony of formatting and recovering Vista HP again, and consequently trying to teach it all over again how to suck less.
Okay, so less waffle and more questioning. Background information is that the laptop is a Compaq F560. It has at present Win Vista 32 HP on the primary partition (C), with a recovery partition on (D). It has a very basic, almost un-alterable BIOS, 1.5Gb of RAM, 120Gb HD, standard CD rom, integral nVidia 6100m graphics card, a broadcom wireless network adaptor and various other bits n' bobs.
When installing OpenSuse last time I found 2 huge flaws with my method. First one is, that I didn't have wired networking available to me at the time, and foolishly forgot to get hold of the wireless adaptor drivers before installing Suse. No biggy you say, just go back to windows and download from there. Great, except I'd bozzed up the MBR too, so couldn't do that. Suse, for it's part, ran fine. Very smooth. I just couldn't do anything with it.
What I'm now looking to do, is give Ubuntu a shot, as part of a dual boot system, with Vista on the other half. I want to make vista the default boot system. I DONT want to have to go through my compaq's recovery system again, if possible. To meet these objectives, Ultimately, I'd like to transfer all of my operations across to Ubuntu, but I'm too windows-dependent at the moment, though some sort of windows-emulator wouldn't be a bad idea if anyone knows where/how/what.
View 3 Replies
View Related
Jun 5, 2010
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
View 9 Replies
View Related
Nov 7, 2010
I recently bought a new Samsung netbook N310 and want to install dual-boot Debian lenny along with windows xp home edition. My CPU is like this: Intel Atom CPU N270 1.6GHz which architectures and kernels I should download from the cd installation? there are so many:alpha, amd64, armel, hppa, i386, ia64, mips, mipsel, powerpc, s390, and sparc.
View 4 Replies
View Related
Sep 30, 2010
Can you do a Dual installation when XP is already installed?
View 9 Replies
View Related
Jul 21, 2010
i just wanted to know that during a dual boot installation with windows xp, if fedora is installed after windows, where does the GRUB go on the hard disk? In the /boot partition or the MBR of the hard disk?
View 7 Replies
View Related
Feb 27, 2011
I use DOS and WIndows XP for engineering and CAD work, and HAD a WORKING dual boot system, with NTLDR booting both systems. Now, after my attempts to add Fedora 14, I don't have ANY working OS. I don't know much of anything about Linux. I just wanted to add it to my to machine for safe and reliable web browsing and email. I know it can be used for much more, but that was just the initial goal.
I've watched a friend create a triple boot with Linux a couple years ago, and he wrote the procedure up for me. (I've seen the same procedure posted many places online.) It involves installing linux to a clean formatted XT3 OR XT4 partition and GRUB to the root of the same partition. Then you "DD" the first 512 bytes of the partition to a file "bootsect.lnx" in the primary partition. And finally, you reference "bootsect.lnx" in the Windows BOOT.INI.
I repartitioned the drive for Linux, using Partition Commander 11. It's structured like this. (sizes are my best recollection)
I booted from a Fedora 14 LIVE CD. Ran GPARTED from a terminal window. It identified the 100GB XT 4 partition as SDA7 and the 2GB Linux swap as SDA8. I figured this was the only place Fedora would go. So I started the installer.
It didn't tell me where it was going to install, but alerted me that I had FAT, FAT32 and NTFS partitions. I was given several choices and selected the option that would not touch those partitions. The installation proceeded, and I was never given the chance to tell the installer where to install GRUB. I had every reason to expect that it installed to the XT4 partition. On reboot, I now have a command line, "GRUB:" No DOS, WINDOWS or Linux.
Is there anyway to restore my DOS and WIndows booting under NT Loader? Or is it gone for good? I may want Linux, but I can't live without the DOS and WIndows for my work. If it IS possible to fix this can we do that BEFORE we get back to installing Linux?
View 14 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
Dec 13, 2010
I want to know how should I install for dual boot on new harddisk, because in my previous new harddisk win7 formatted it as a dynamic drive (partition) which cant be read by ubuntu.
View 6 Replies
View Related
Feb 28, 2010
I've had some problems with ubuntu and I had to reinstall the whole system. Now it's brand new, and I'd like to make it the way it was.
View 14 Replies
View Related
Jan 1, 2010
I bought a new computer recently (Acer), and it came with Windows 7 (Home Premium, 64bit) pre-installed. I'd been using Ubuntu for a year or so, and I liked that and wanted to keep using it, but since I paid for the Windows it seemed stupid to just get rid of it altogether, so I decided to dual boot. So I installed Karmic Koala next to Windows and everything went fine.
Now, a couple of months later, I realised I had been using Windows almost exclusively after all (sorry, free software! I love you but I couldn't stay faithful), and I decided to stop dual booting. After all, I could use the extra drive space and it would be nice to skip the GRUB screen when booting the computer. I did some googling and found out it should be a pretty straightforward process, with the installation disk. No problem, I thought, since I made the recovery disks on the blank dvd-rs that came with the computer straight after I got it.
So I deleted the ubuntu partition, and went for a clean new install with the recovery disks. The disks turned out to be some Acer-made variety of a windows installation disk, but I (foolishly) thought that shouldn't make much difference, and clicked "repair system". It went fine, until the installation was complete and windows said the computer had to be restarted to finish. Ever since then, nothing has gone right.
The computer just won't boot. I get "grub rescue" prompts. I can boot from the ubuntu cd or the windows recovery disk, and I've re-installed both OS-es a few times, but the problems remain. I can get into ubuntu fine, but when I try to re-install windows, the problems start again: either the aforementioned "grub rescue" prompt, or it just keeps re-starting and re-starting, claiming there is "no medium".
View 4 Replies
View Related
Jan 4, 2010
I recently installed XP Pro and 9.10 on my hard drive, and I'm experiencing a very long wait time my computer to start up. It takes about a minute or two to get to a screen where it says 'GRUB Loading', and another minute to get to the selection screen. When I select Ubuntu it also takes about two minutes to boot, when I select XP it takes the same time as if I just started the computer. Is there a way to make this faster?
View 1 Replies
View Related
Jan 29, 2010
I have made myself a Ubuntu 9.10 Karmic Koala (32-bit) CD, which I want to dual-boot with my current XP Pro 32-bit on my HP laptop. But for some reason HP made two additional partitions on my hard drive (one labeled "HP Tools" and listed as a System partition in the Disk Management, even though it doesn't have anything on it). I can't see anything (even with "show hidden items" enabled) on either of these extra partitions, at least not that I know about; so I'm wondering if they're system folders that I need to keep, or can I safely delete them?
Another question was, I have read here that you need to make a "Swap Partition" when installing Ubuntu, but I've also read (can't remember for sure, think it was here) that you only need to make the Swap Partition if you're going to be making the machine Hibernate. Can somebody set me straight here?
My last question was, when I actually install Ubuntu, how do I go about getting some of the drivers for my hardware, so I can actually enable my wireless on Ubuntu to get the updates and software and all that?
View 9 Replies
View Related
Feb 5, 2010
I am currently running Windows Vista and am planning to upgrade to 7 in the near future.
I want to dual boot with Ubuntu 9.10.
The options I know of are:
1. Partition the drive and install Ubuntu
2. Use the windows installer (winbuntu - I think)
Which method they prefer and some pros and cons of each?
Which installation method would make it easier to remove one of the operating systems at a later time?
When installing using winbuntu does the ubnutu OS use any of the windows resources or disk?
View 3 Replies
View Related
Jun 12, 2010
I am about to install Ubuntu 10x, but before I do, I need to be sure the install will offer a chance for a dual boot. Does such an offer exist? Does the program do it, or do I need to partition?
View 1 Replies
View Related
Aug 31, 2010
i have read many tutorials but i cat find that what i need. i have a hdd with xp. have a new hdd where i want to install ubuntu 10.04. one way is to disconnect xp and then install mint, but there is not going to be a boot option witch OS can choose. and i must use then the f12 to boot from deferent devises.
View 6 Replies
View Related
Sep 18, 2010
I am currently running Ubuntu 10.04 amd64. I have a few programs that just refuse to run under 64bit. Is it possible to have a dual boot system so I can pick which architecture I want at boot time? Is it as simple as just installing the 32 bit version on the same partition?
View 4 Replies
View Related
Oct 2, 2010
I just installed Ubunto from a flash drive and all seemed to go well. This is an XP machine and it created a parititon for Ubuntu. Fine. Until I click on restart. Then the screen goes black and kicks out a long list of error messages. I tried reinstalling and the same thing happened. How can I get to a dual boot menu at startup?
View 3 Replies
View Related
