I am trying to use TOMCAT 7 from eclipse Helios and I seem to not to be able to see Tomcat's browser visual menu.
I receive the following message: description The requested resource (/) is not available.
I have started Tomcat from the shell(UBUNTU 10.04) and it works.
If any one knows about Apache-Tomcat installation.
View 5 Replies View RelatedSince upgrading to Lucid, I am getting the following dialog warning on login: 'Could not apply the stored configuration for monitors X Server does not support size requested' Im using the current proprietary NVIDIA graphics driver with dual heads. My display is fine, but the warning every time I login is annoying. After googling around I found this thread: [URL]. I tried going to Monitor Preferences as suggested. My resolution as displayed in the default tool is set to 3840 x 1200, which I suspect is the issue forcing the dialog, but I cant change the resolution, refresh rate or rotation from the Monitor Preference dialog box. dino99's response (in the referenced post) about xorg.conf not being needed anymore seems relevant. How can I resolve this issue and get rid of this annoying warning? Is there a configuration that I can update with a supported resolution to placate lucid?
View 9 Replies View RelatedI recently installed Antix Mepis 8M on Dell Latitude D410 laptop. Everything is fine except that at boot I get the following weird message: pci 0000:00:1e.0: BAR 7: can't allocate I/O resource [0x10000-0xffff]
It doesn't noticeably slow down the boot and everything works fine once running, but I'm curious to know what it might be and whether it could possibly represent trouble in the future.I googled it and found this: http:[url].....But there is no associated solution, and other results are largely reposts of this query.
Added the following line to sources.list:
deb [URL] squeeze main non-free
After that I did an update and upgrade.
The following packages were kept back : ffmpeg libavcodec52 libavdevice52 libavformat52 libcairo2 libpostproc51 libswscale0 mplayer ( libcairo2 is on hold ).
To overcome this I did: apt-get install mplayer
The following extra packages will be installed:
liba52-0.7.4 libartsc0 libbs2b0 libdirac-decoder0 libfaac0 libggi2 libggiwmh0 libgii1
libmp3lame0 libopencore-amrnb0 libopencore-amrwb0 libvdpau1 libx264-104 libxvidcore4
It ends like: Unpacking replacement mplayer ...
dpkg: error processing /var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb (--unpack):
trying to overwrite '/usr/share/pixmaps/mplayer.xpm', which is also in package mplayer-gui 2:1.0~rc3++final.dfsg1-1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Processing triggers for man-db ...
Processing triggers for menu ...
Errors were encountered while processing:
/var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Next thing I tried : apt-get dist-upgrade:
The following packages will be REMOVED:
libavfilter0
The following NEW packages will be installed:
libavcore0 libavfilter1 libavutil50 libva1
The following packages have been kept back:
libcairo2
The following packages will be upgraded:
ffmpeg libavcodec52 libavdevice52 libavformat52 libpostproc51 libswscale0 mplayer
Preparing to replace mplayer 2:1.0~rc3++final.dfsg1-1 (using .../mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb) ...
Unpacking replacement mplayer ...
dpkg: error processing /var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb (--unpack):
trying to overwrite '/usr/share/pixmaps/mplayer.xpm', which is also in package mplayer-gui 2:1.0~rc3++final.dfsg1-1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Processing triggers for menu ...
warning, in file '/var/lib/dpkg/updates/0006' near line 5 package 'libavcore0':
missing description
warning, in file '/var/lib/dpkg/updates/0006' near line 5 package 'libavcore0':
missing maintainer
warning, in file '/var/lib/dpkg/updates/0015' near line 5 package 'libavfilter1':
missing description
warning, in file '/var/lib/dpkg/updates/0015' near line 5 package 'libavfilter1':
missing maintainer
Errors were encountered while processing:
/var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Got a few more questions from the Debian Security Howto.
Section "4.11.2 Limiting resource usage: the limits.conf file" page 44
Code: Select allnano /etc/security/limits.conf
At the bottom I get...
Code: Select all#<domain> <type> <item> <value>
#
#* soft core 0
#root hard core 100000
#* hard rss 10000
[code]...
Do I have to uncomment these lines for them to take effect?
I need to monitor resource of my server. I have found munin and sysstat, Does munin use systat? or they are different package?because in some documents I have found on net,for installing munin, systat is needed !!for example on RedHat based distor, sysstat package is needed! but on debian is not needed!
View 1 Replies View RelatedI've been trying to forward some ports using iptables for some time now, but still haven't figured out how to get it to work..What i'm trying to accomplish is to forward all traffic from port 80 to port 8080, and all traffic from port 443 to port 8443, this because i would like to run tomcat as a non-root user, and the original ports can only be used as root.. I've currently setup my iptables like this:
# Generated by iptables-save v1.4.2 on Wed Nov 10 16:44:45 2010
*nat
:PREROUTING ACCEPT [39350:6120333]
[code].....
I am trying to configure simple tomcat with apache in rhel5. How can I do the same.
View 4 Replies View RelatedI recently decided to install Ubuntu on a couple of computers without CD drives (netbooks), so I followed these instructions to create a bootable flash drive: http:[url].....That worked fine for both netbooks. Now I'm trying to use the same flash drive on a desktop currently running Windows Vista, but get his message when I try to boot from the flash drive:
No DEFAULT or UI configuration directive found!I tried to boot one of the netbooks from the flash drive again and that still works.I'm thinking a BIOS setting.
i used my windows box to connect to ftp(fed box) and i keep getting an error saying "The requested name is valid, but no data of the requested type was found." does anyone know why i cant connect?
View 1 Replies View RelatedI'm very happy with 10.04 but want to take a look at 10.10. I can't seem to find a list & description of all the new features.
View 6 Replies View RelatedI have two instances of Kubuntu 9.10 (Karmic) I have installed grub2 and all seems OK except for a small bug with update-grub which I have a workaround for. Reported elsewhere
The working system is on /dev/sda7 My copy for testing is on /dev/sda5 gparted flags /dev/sda1 as "boot" and that partition has temp files only. update-grub found my test system on sda5 OK. I would like to upgrade 9.10 on /dev/sda5 to 10.04 (Lucid) as a trial as I had problems with this upgrade on my working system (sda7) and had to recover from a backup image - hence the test system on sda5
I would like advice on what happens to grub2 and MBR which I assume is on sda1 when I do this upgrade. I expect that the upgrade will change grub (in MBR?) to use sda5 instead of sda7 as the main grub filesystem. If not, then all is fine and I carry on as usual.
If not then how to I re-instate my working grub (/boot/grub/*) to sda7 (my working system) as far as the bootloader in MBR is concerned. Is it simply a case of backup and then re-install MBR after the upgrade? Or is there a better way or have I misunderstood something?
I have tried to do a clean install of 10.10 on a system that previously had 9.4 on it. Did not do an upgrade just requested a clean install of UBUNTU. Install proceeds to create user name/password page then just stops. Install line below says ready when you are but I do not get a forward to come up on the screen, it just sits there. I have used different hard drives and a different cdrom drive and 2 different installation disks and it does the same thing.
View 2 Replies View RelatedI have searched all over. I cannot find any info on the description of the Fedora mirror release directory structure and the reason for having a "Fedora" and "Everything" directory? Yes I looked at [URL] I mostly work with the Red Hat 5.x. The Fedora release software is kept on a mirror and the DVD release as, (using i386 release):
[Code]....
I'm trying to install 11 on my desktop from the live CD. I already have XP and Ubuntu installed, and I know for certain that I have an additional 25 GB left with my documents partition included. I am using a ~= 1 week old hard drive, so that last 25 GB is raw and unformatted.Anyway, here's what's going on: When I attempt to create a new partition in the "free space," I get an error dialog saying "Could not allocate requested partitions: not enough free space on disks."I thought maybe it was a quirk with the ext3/ext4 dilemma, maybe I had to create /boot prior to /, but I tried it both ways.
View 4 Replies View RelatedI'm trying to install Fedora 12 from a DVD created by an iso I downloaded. When the install gets to the point of actually installing files, I get a message saying that it can't find 'authconfig-gtk-6.0.0.-2.fc12.i686.rpm'. I looked at the DVD for that file and it isn't there. I found 'authconfig-gtk-5.4.13-1.fc12.i686.rpm'. Any ideas how to fix this? The DVD passed the media check at the beginning of the install. I'm not exactly a newbie in Linux as I have some experience with it.
View 4 Replies View RelatedI searched this on the web to no avail. Could I get a clarification on what exactly Yum ,Yumex, and Packager Installer are? Yum is the terminal and Package installer is (System>Addministration>Add/Remove Sofware correct? Additionally what is Yup and what is Yumex.
View 1 Replies View RelatedToday when tried to install a software from the terminal...d command dint work. Check this.
calvin@calvin-desktop:~$ sudo apt-get install pidgin
[sudo] password for calvin:
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
calvin@calvin-desktop:~$
It says that it cannot get lock! I have installed ubuntu along with windows! and drive E: is in windows.
After trying most of the solutions I could think of, including reinstalling and upgrading, I'm posting here hoping someone would take me out of this misery now.Laptop：thinkpad t500I was running Ubuntu 10.04 and it froze. I rebooted and it shows the following message and gives me the "initramfs" prompt:Quote:
BUG: unable to handle kernel paging request at 00f44000
...
...
[code]....
When installing I am selecting the manual partitioning scheme( I have arch on another partition). After I have selected my custom partitions and their mount points it starts the installation but almost immediately it gives the error message that it cannot create a partition on the specified one, as it is used by the OS. I have also tried to create partitions through gparted in the live session but to no avail. I am sure that no partitions are mounted or in use by the system, I have checked this using the mount and fuser commands. I also tried the oem installation but the result the same.
View 3 Replies View RelatedI installed eclipse and tomcat with package manager. Eclipse and tomcat are running but i can't see tomcat in the eclipse. I just see 'Basic' folder. That is a screenshot [URL]
View 1 Replies View RelatedI'm trying to install Fedora 13 on my HP dv6 laptop and when I try to use the Use Free Space installation type, I receive a Partitioning Error: Could not allocate requested partitions - not enough free space on disks. Before I started the install, I used the Disk Management utility in Windows 7 to shrink the volume of the C: drive down to 242 GB and leaving 210 GB Unallocated. Here is what the screen looks like when I select Create Custom Layout (also receive the not enough free space error):
Device (sda) Size Type
sda1 199 ntfs
sda2 248,018 ntfs
Free 215,175
sda3 13,443 ntfs
sda4 103 vfat
I'm trying to do a coursework at home which is a java web app. I've installed Tomcat and mySQL, both appear to be working fine. I have Netbeans installed already - from the Ubuntu Software Centre ages ago - when creating a new project it doesn't give an option for a web app project.... Is there some extra package(s) I have to install ?
View 1 Replies View RelatedI should have caught this during the upgrade, I saw the potential problem but failed to write it down. All my applications served by Tomcat fail to load. Catalina logs show the following error for each app. Error deploying configuration descriptor msgboard.xml The complete error for an individual application is
[Code]...
Again, during the upgrade a warning popped up that each app would need to be spelled out in some configuration file SOMEWHERE because of a change in security! Would someone be so kind as to direct me as to where and how this would be accomplished. I apologizes for not being able to find this out on my own but have looked and can't find it. I'm pretty sure anyone proficient with Tomcat on Linux will know what and where these changes need to be made. Or if anyone knows if and where there is a log of all communication during the upgrade I might be able to figure this out on my own. Is there such a log kept during an upgrade? Also if this question would be more appropriate in the Server Platforms forum I will do that.
But now I have task of connecting mysql and tomcat. I dont have any idea on this. However I looked some manuals but did not find any luck. how to connect mysql with tomcat. btw I have downloaded mysql connector and copied the .jar file to $CATALINA_HOME/lib
View 4 Replies View Relatedi tried to install sun-java6-jdk through commandline ; but it failed after posting a license agreement from sun .
dpkg failed to install the package ;
then i tried to install from ubuntu software center
Servlet and JSP engine Tomcat6
but it gave me an error :: An unhandlable error occured
There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. report this error at http://launchpad.net/aptdaemon/+filebug and retry.
Details:
Traceback (most recent call last):
File "/usr/lib/python2.6/dist-packages/aptdaemon/worker.py", line 768, in simulate
return self._simulate_helper(trans, status_path)
[Code]....
I'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.
View 6 Replies View RelatedI have Dell Laptop 1545 which already installed windows 7 home premium which is also having two partitions one is reserved by the oem and another is for recovery partition and another 200gb i am using for windows 7 now i have left only 80gb hard disk. So I started to install the Fedora 12 in my laptop every thing is going fine but
at the time of creating the partitions iam unable to allocate the partitions the left 80gb i tried to select and tried for custom partition but to my surprise it is giving the following message "Could not allocate requested partitions: not enough free space on disks"
So I cant seem to be able to install fedora 15. I think it is the disk. I have windows 7 already installed (and would like to keep it) It was installed on the end of the hard drive leaving a 100 GB chunk in the center of the drive open and unformatted (this may be the problem). Anyway I used the live cd and tried to format the unformatted partition to exf but it gives me this error
Code:
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=105906176, size=104752742400, type=EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
Entering MS-DOS parser (offset=0, size=500107862016)
MSDOS_MAGIC found
found partition type 0xee => protective MBR for GPT
Exiting MS-DOS parser
Entering EFI GPT parser
GPT magic found
partition_entry_lba=2
num_entries=128
size_of_entry=128
Leaving EFI GPT parser
EFI GPT partition table detected
containing partition table scheme = 3
got it
got disk
new partition
added partition start=105905664 size=512
committed to disk
Error doing BLKPG ioctl with BLKPG_ADD_PARTITION for partition 2 of size 105905664 at offset 512 on /dev/sda: Device or resource busy
Do I have to reinstall windows for this to work or is there something I can try to do.