I installed eclipse and tomcat with package manager. Eclipse and tomcat are running but i can't see tomcat in the eclipse. I just see 'Basic' folder. That is a screenshot [URL]
View 1 RepliesI'd like to start tomcat from eclipse, however, I get several Exceptions preventing tomcat to start. I can however start tomcat from the console, provided I do this as root :
Code:
# su -
# service tomcat5 start
Starting tomcat5: [ OK ]
And I do get the page saying that I've setup Tomcat successfully when going to http://localhost:8080 in my browser.
I got jdk, jre, tomcat, eclipse installed correctly (I'm sure about that)I can start tomcat and works fine, and eclipse too.but whenever I try to run server through eclipse (server->run) I got following message:
Code:
WARNING: Failed to create work directory [/home/kossel/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/work/Catalina/localhost/_] for context []
Feb 2, 2011 6:08:23 PM org.apache.jasper.EmbeddedServletOptions <init>[code]....
did ls -ln workspace I get:
Code:
drwxr-xr-x 4 1000 1000 4096 2011-02-02 16:34 Servers looks has permission right?
I'm trying to get a Tomcat server running using the Java VM -server option on Ubuntu Karmic 9.10 (I'm using the official Karmic AMI on EC2: ami-bb709dd2)
I install Tomcat:
Code:
sudo apt-get -y install tomcat6
I set up a bit of configuration in /etc/default/tomcat6:
Code:
JAVA_OPTS="-Djava.awt.headless=true -Xms1024m -Xmx1024m -XX:PermSize=384m -XX:MaxPermSize=384m"
I can start Tomcat with no problems:
Code:
sudo /etc/init.d/tomcat6 restart
However, if I add the -server option into the JAVA_OPTS variable, like so:
Code:
JAVA_OPTS="-server -Djava.awt.headless=true -Xms1024m -Xmx1024m -XX:PermSize=384m -XX:MaxPermSize=384m"
I get this:
Code:
$ sudo /etc/init.d/tomcat6 restart
* Stopping Tomcat servlet engine tomcat6
...done.
* Starting Tomcat servlet engine tomcat6
Invalid option -server
Cannot parse command line arguments
How do I set the -server option correctly?
I want to build a NAS like mini pc to be used as a simple tomcat server (for running Jira and perhaps experimenting a bit) and as a GIT server. What kind of system requirements would I have?
Would something like this:[URL]../nas/n...sed-nas-part-2 be sufficient? And if I'd virtualized everything via VMWares would that make a lot of difference?
I have been using Eclipse to program in Java for a long time, and have been using Jigloo for most of my GUI design. Recently I decided to try out the C/C++ plugin. I tried installing it, but it did not work. After many attempts, I finally gave up. However, after uninstalling it I found that Jigloo had stopped working. Any other plugins I try to install now also don't work. I have tried uninstalling and reinstalling plugins, and reinstalling eclipse, but nothing I have done fixes it. Although eclipse says that the software has been installed, nothing shows up in the features list or the plugins list.
Another problem: When I install eclipse from the repositories, it doesn't install a bunch of libraries and eclipse cannot recognize standard java files.
I have been writing PHP using Adobe Dreamweaver; I have been looking around for an application that focus more in PHP.I have found:
[URL]
and:
[URL]
I know Zend stands behind PHP and that Eclipse is a popular open source IDE. What is the difference tho?Is the PDT Project only a functionality that could be added to Eclipse IDE? Is Zend for Eclipse a stand alone IDE for PHP? if so, Why the Eclipse in the name? I have downloaded Zend Studio for Eclipse, so far it seems very complete (no that have learned how to use all its features).
The Metrics plug-in supports Java development well at Eclipse.
[URL]
I would like to know if it supports Eclipse CDT, so I can use it with my C++ project. Any thought? If it doesn't support CDT, is there any good static code analysis tools available for Eclipse CDT?
I recently had to reinstall Eclipse on ubuntu 10.10 and i did it twice, once just removing eclipse package, and the second time removing every package associated with an eclipse install.when i launch eclipse I go into my package view and select a package and then double click on a Java file.
View 5 Replies View RelatedI use Slackware64 13.1. I installed eclipse from slackbuild.But how can I install Eclipse CDT? is a plug-in for eclipse? It's another program?
View 4 Replies View RelatedI am new to Fedora (I have always used ubuntu in the past), and I am trying to download eclipse. Unfortunately, "sudo yum install eclipse" is returning "no package eclipse available". I think this means that I am missing the correct repo, but I'm not sure which is the right one and don't know how to add it to my repo list for this version. My version of fedora is centos5 based, and my current repo list is the following:
[Code]...
I'm trying to access a .jsp page that is located on my apache/tomcat server from the web. I changed the connection port of tomcat to port 80 and changed my doc root from the default "webapps" to my normal web directory. However, whenever I try to visit the page, I only see the code of the page.
If you would like to see what I am talking about, feel free to see it for yourself:
[URL]
I am trying to run Tomcat on Ubuntu System from a remote host. However, when I exit the terminal, Tomcat process shuts down.
The command I am using to run it is
nohup ./startup.sh &
after executing the commands
1. ./startup.sh
2. tail -f ../logs/catalina.out
the following error comes on the terminal
.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(Abs tractAutowireCapableBeanFactory.java:1245)
[code]....
I have Linux server with cent OS.I have installed tomacat6.0 and postgresSQL8.3 on it.The thing is i wanna know whether the tomcat and postgresSQL is running or not using the script.
View 1 Replies View RelatedI am having a problem.I use Ubuntu 10.04 server edition.Two computers on LAN one with Public Ip A other with local (Class C IP)say it BWith a third computer in same subnet I can access a TomCat application running on B as http://Ip of B:8080/applicationI want to use A as a Reverse Proxy for this application to be reachable from internet.So on Googling I came across some thing known as mod_ajp I enabled that on my Server A asa2enmod proxya2enmod proxy_ajpa2enmod headersbut after that I am not able to understand as how do I define vhost to be able to forward HTTP request which come on A as www.myserver.com/appto B which I can see internally as http://Ip of B:8080/application so Tomcat on B handles this.
View 4 Replies View RelatedI am struggling with some issues Apache-tomcat is running fine, and port:8080 is also LISTEN but when am tiring to access the tomcat web_page is not up ,why ?
View 2 Replies View RelatedDue to a ton of research I believe I now understand the output of ps, top, and free better than ever, and also have a relatively decent grasp on memory management (virtual address space, etc.) than I ever did before. With that being said, my server is super low on available memory and I can't make 1+1=2 on why it is. I suspect it's Tomcat/JVM (which I admittedly know precious little about). I am rebuilding this server (for a number of reasons) and plan to install 8GB but solving this mystery is key to supporting/promoting my design plans.
Relevant info So, I have very little memory left, I am swapping pretty hardcore, and even though I suspect it's the Tomcat/JVM stuff, it sure doesn't look like it from the memory tools. For that matter though it looks like "nothing" is using memory, or certainly not enough to cause such a low memory problem. The server was rebooted 24 days or so ago because it actually ran out of all virtual memory. How do I solve this mystery? Am I using the wrong tools? Am I misunderstanding my tools? What can I do to track down the processes depleting my memory?
On my Ubuntu 10.04 lucid lynx server edition machine I have an Apache http server listening on port 80 and today I installed the Funambol server which added an Apache Tomcat server listening on port 8080. From within my lan I can reach both servers, but from outside the lan I can only reach the http server on port 80 and not the Funambol server on port 8080. I get a time out message instead.
In my router I have setup port forwarding, such that both ports 80 and 8080 get forwarded to my server machine. Must Tomcat be told to listen to external requests? Is my server listening on port 8080 only for requests inside the lan? Or is there some authorization that fails when I try to visit from outside my lan?
Here is some netstat output, I don't know if the differences between the 80 line and the 8080 line are relevant:
Code:
remon@compaq:~$ sudo netstat -nlp | grep 80
tcp 0 0 0.0.0.0:8009 0.0.0.0:* LISTEN 1778/java
[Code]....
My first time installing centos server and adding it to xp home network. I am new to setting up my own network in general. I have a home windows wired ethernet xp network (simple linxs router) with 2 xp boxes and one centos5 box all connected to the same router. I just set up the centos box running tomcat on port 8080. I need to do two very basic things at this point, but am not sure what I need to do:
What do I need to do so I can:
1. Connect in firefox on one of my xp boxes and call the tomcat server running on my centos box?
2. Be able to ftp to centos box from either of my xp boxes?
We need to only allow access to a web page only to some ips. We want to do this via Apache but it seems like the standard way of denying all and allowing some ips doesn't work because we mount a webapp using tomcat.
The sites-enabled file looks like this:
Code:
NameVirtualHost *:443
<VirtualHost *:443>
ServerName web.address.com:443
ErrorLog /var/log/apache2/app_ssl_error.log
[Code]....
So researching how to install Tomcat 6, I ran across a guide that specifically states there are issues with the repository version of Tomcat. Doing some more research it seems like this is reported in multiple places including a disussion on the official mailing list that was inconclusive. So my question is, if this is intended for a production server should I use the repository one or manually install it
View 2 Replies View RelatedI have tomcat installed with port forwarding to http port 80. I configure ldap authentication for apache2(/var/www). But I could not configure tomcat for ldap authentication.
View 1 Replies View RelatedI'm really new with Ubuntu and have the following problem:I installed successfully sun-java6-jdk using apt-get install sun-java6-jdk Then set up the JAVA_HOME environment variable to "/usr/lib/jvm/java-6-sun-1.6.0.20"
And then installed successfully tomcat6 using apt-get install tomcat6 apt-get install tomcat6-admin tomcat6-examples tomcat6-docs Everything seem to be right, when I try the browser with http://localhost:8080 return a webpage with "It works !" and other text
But, if I try http://localhost:8080/manager/html then returns 404 error, the error is something like "The required resource (manager/html) is not available" (that is my translation from the spanish text "El recurso requerido (/manager/html) no est disponible")
[Code]..
I'm having some trouble with Tomcat 6 after upgrading to 10.10. During the upgrade process, the installer hung while dealing with Tomcat 6, which required me to kill the upgrade and do some clean up, and then re-run `apt-get upgrade` again to get things going. This left some weirdness (like the MOTD for both 10.10 and 10.04 being shown on login), but otherwise things are OK. The only remaining problem I have is Tomcat; it simply won't start when the server is booted. The information I have:
Tomcat 6 runs normally when started with `sudo /etc/init.d/tomcat6 start`. No errors are thrown, everything works as expected.I used `rcconf` to try removing and reinstalling the rc scripts, this didn't help. I manually deleted all the rc scripts, then used `rcconf` again. The scripts all seem symlinked correctly to `/etc/init.d/tomcat6`, but it's just not coming up on boot. I ran `sudo grep "tomcat" /var/log/*.log` to see if something is appearing in the logs, but nothing of interest is there.
How can I verify that Ubuntu is even trying to start Tomcat? As this is a development box, I am not adverse to a quick + dirty solution if there's some either simple way of getting it started at boot. I'm thinking the next Ubuntu release will see me blow away the server and start it fresh, but right now I'd just like a working box
I just did a clean install of FC12 x86_64 and want to configure tomcat to run behind apache httpd. What is the easiest way to accomplish this? I'm a newbie at server configuration so detailed instructions would be nice
View 4 Replies View RelatedI'm having a problem with eclipse, it keeps crashing while I'm working working with it, running from the terminal i found this:
# A fatal error has been detected by the Java Runtime Environment code...
i have googled and i found a ubuntu forum where a guy had the same problem, his solution was disabling the php browser, so i try to do it and go to window>preferences>General>Web browser... as soon as i click "web browser" it just crashes with the same error above, so i guess the "browser" is the problem, i didn't find the "php browser" option so that's why i click on "web browser"
if anybody has a solution for this please help me, i would be awesome to solve this.
I am up and running. Symptom: webapp/servlet deployed to Tomcat, utilizes JDBC driver for MySQL connectivity. Upon launching application in browser and performing action requiring database interaction, exception thrown, server log:
[Code]...
I've got my first EC2/cloud instance of Ubuntu up and running. This is my first time really dealing with the server edition. I've loaded Apache, Tomcat, PostgreSQL, and Webmin. I've got a public IP on the instance and it is working. I've opened, for now, ports 80, 8080, 443, and 10000 to 0.0.0.0/0.
I cannot get into Tomcat Manager or Webmin at all through a browser. For Tomcat, I've restarted, stop/started, and verified that Tomcat is running. I installed Webmin all through apt-get commands so any dependencies should have been installed (first time doing it this way), but cannot get to the login screen. But if I just go to the IP, Apache goes to the "It Works." splash page. Did I miss some set up? Is there an internal firewall in Ubuntu Server edition that needs to be set?
I have tomcat 5.x installed and is running on port 80(with mod_jk setup). The directories 'manager', 'examples' and 'ROOT' were removed under /usr/share/tomcat/webapps/ and rebuilt them copying from a working tomcat server. When I acces [URL] (or) [URL], it keeps on prompting for the password even after enter correct username and password.
View 1 Replies View Related