Ubuntu Installation :: Same Error During And After Install - Critical Temperature
Apr 30, 2010
I got the same error while installing (even though install works fine!) during installation and after it. Its Critical temperature reached, 3564 C, shutting down. Celcium value is not made up, its actually among those lines (four-digit).
I had another problem with installation, but I managed to install using nomodeset setting. My pc is a rock laptop (which is actually supposed to work well with vista instead.. oh wel..).
Any suggestions? I have tried installing with acpi=off, but it doesnt make any difference during installation or after it..
Also another error I got during some of my tests was: "init: Failed to spawn rc-sysinit main proccess: unable to open console: input error
View 7 Replies
ADVERTISEMENT
Jul 11, 2011
I recently installed Ubuntu and wanted to remove the Windows XP installation is was dual booted with (I used Wubi to install Ubuntu), but I ended up just editing boot.ini to remove it from the boot menu and automatically boot in to Ubuntu. But then, Ubuntu started playing up and keeps on popping up with the Critical Temperature warning, saying it's 80-100C although it's the first time it's been turned on in 14 hours... But to add to my confusion, when I try to boot from ANY disk, it comes up with "NTLDR is missing" and a restart message.
View 2 Replies
View Related
Oct 7, 2010
i need to install nagios-plugins 64 bit, when i tried to install via yum i got this error yum install nagios-plugins.x86_64 yum error Unsatisfied dependency i hv installed openssl 32 bit but it needs openssl 64 bit, even php and perl. i tried to to install via yum yum install openssl.x84_64 but its not getting installed i tried to uninstall openssl but its shows so many packages to remove
View 4 Replies
View Related
Mar 7, 2010
I installed fedora 12. fine and YUM was still working, now after i installed DA:
is gives me code...
So i want to to install libssl, but then i get:
CRITICAL:yum.cli:Config Error: Error accessing file for config file:///etc/yum.conf
The file exists and here are the contents
My yum.conf file code...
how to solve this
View 2 Replies
View Related
Jan 26, 2011
I have been happily using Ubuntu for a good while now. It started out sometime around the end of '09 when I purpose-built a machine to continue using WinXP Pro as my primary OS, but using a ROMTEC Trios to mechanically switch to another hard disk, booting Ubuntu Karmic. I liked the fact that the Trios kept my two disks from "seeing each other", because, at the time (and perhaps, still now), I was not ready to keep the peace between a Linux boot and a Windows boot. It was simple: use XP for "day-to-day" for a while, then power down, flip a switch, and boot up Ubuntu to get my toes wet in the Linux world.
I very quickly developed an affinity for the Ubuntu experience, and ditched my XP installation in favor of a blank slate for Linux experimentation. The disk which previously contained XP has since housed various musings of mine, including Ubuntu Studio, Puppy Studio (yes, I am a recording musician), and straight Puppy, along with some recent tinkerings with straight Ubuntu Maverick (which I've had problems with due to what I believe is lack of driver support for nvidia-96).
BTW, my current primary install is that of the original Karmic install, but upgraded to Lucid...running just fine to this date, but wondering a bit at how I'm only showing 11GB of free space on a 160GB disk...I can't quite figure where the space has gone...the math doesn't seem to work in my head, but then again, I'm still a n00b in a lot of ways.
At any rate, I've gotten a lot of mileage out of Ubuntu so far, and I'd like to experiment with "pimping" a clean Lucid installation from the ground up (as I said, I'm having graphics driver issues with Maverick, and I'd kinda like to stay with an LTS release for the time being anyway).
I'm thinking that a customized partition scheme would be a good thing to think about, and the geek in me is inclined to reach beyond the installer defaults and even beyond the common recommendations of adding a separate /home partition. I've read an awful lot about the subject, and there are as many opinions as there are underarms, but I've just gotta ask it anyway:
For a single-user desktop, is there any efficacy in using separate partitions for /boot, /tmp, /usr, /var, /opt, and/or /usr/local? I know most that I can do without a separate /srv partition, but for the others, I just wonder if I can use separate partitions for both security and optimization reasons.
View 1 Replies
View Related
Feb 9, 2010
I've scanned a document with OmniPage on a Windows PC; I've saved the images as black and white png and I can open them on Windows, but on Ubuntu Eye of GNOME gives me (for one image only) the critical error �PNG: Decompression Error� and doesn't open it, while Mirage, GIMP, GQview and F-Spot show an empty image. The output of a pngcheck -vtf follows:
Quote:
File: [...] (101408 bytes)
chunk IHDR at offset 0x0000c, length 13
2480 x 3507 image, 1-bit grayscale, non-interlaced
chunk tEXt at offset 0x00025, length 13, keyword: Software
[code]....
View 1 Replies
View Related
Feb 26, 2011
I get an odd error message sometimes when I perform an apt-get operation.
Code:
Processing triggers for shared-mime-info ...
Unknown media type in type 'chemical/x-alchemy'
[code]....
View 2 Replies
View Related
Jul 29, 2011
When I try to login to my Ubuntu Server, I get the following error:
PAM Failure, aborting: Critical error - immediate abort
This occurs when I try to log in locally, or via SSH. I have tried logging in using every account and all create the same error. Ubuntu server edition 11.
View 1 Replies
View Related
Oct 31, 2015
I have been having problems with Iceweasel. It freezes and freezes the entire computer too. I have to manually restart the computer.
I ran it from the terminal and right away I got this error:
GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
I am wondering if this has to do with it freezing.
View 5 Replies
View Related
Dec 30, 2010
I have two questions.
1- The vfstpd is running on the Centos server. The server is in the same home network. The SeLinux and firewall are disabled. I can use Filzilla from a Windows PC from another computer and connect and see directory listing. There is a user names adminftp and he is a memeber of root group. When I try to upload or download I get an ftp critical error message.
2- How can I install Adobe Acrobat Reader, Flash Player and Adobe Shockwave on this Linux box?
View 15 Replies
View Related
Feb 24, 2011
I have two questions. 1- How can I set up FTP server for the first time on the Centos? 2-I want to give the ftp user full root access in the directory of /var/www/html so he would be able to upload or download files and folders without getting "FTP Critical file transfer error". From command prompt how can I give the user test root access in the /var/www/html with all the folders, sub folders and files in one shut?
View 9 Replies
View Related
Jun 30, 2010
I have 10.04 desktop basically running xbmc sabnzbd and as a file server. the loads aren't too large as it is just for my house. But i moved from a server install to the desktop because of sound issues and running xbmc at start was a bit of a pain... so bit of background done.
My problem is that after installing 10.04 i got the disk utility pop-up saying one of samsung spinpoint 1tb (HD103UJ) has a critical error... now i didn't panic (although in the next couple of months i am intending to get another drive) but in the meantime i am simply wondering if this is a false flag? i've been getting this error for over 6 months now... pretty much from the last time i formatted the disk, i wiped it and then used dd to copy over a smaller partition, after which i used gparted to grow the partition to the whole drive. could this have created a false flag?
The 184 error is the only one, here is all the data i can glean from my system, attached is a screen of the relevent info from the disk utility, and this it from smartctl:
Code:
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
View 3 Replies
View Related
May 15, 2010
I have a problem with uploading any file to my Suse 11.1 with vsftpd. The active (not commented out) settings in my /etc/vsftpd.conf are:
dirmessage_enable=YES
chroot_local_user=YES
local_enable=YES
anonymous_enable=NO
syslog_enable=YES
connect_from_port_20=YES
pasv_enable=YES
listen=YES
ssl_enable=NO
And I added umask 022 to the user login script problem I have: I login with user and password that exists as a local user on my suse machine. I can read and download from my homedirectory, but I cannot upload with filezilla. Then I get the error: 550 permission denied critical file transfer error
View 3 Replies
View Related
Nov 1, 2010
Since last year I have this problem and it seems nobody knows how to fix it. Here is my post from last year, commenting the same problem [URL] Well, this is what happens to me. I insert my ubuntu/ubuntu studio DVD to my pc. It starts from the DVD and the first screen appears. I select "install ubuntu" and then it starts to load for like 5-10 secs.
Then another screen pops up, this one tells me to choose the main language, BUT.. i cant use my keyboard in this screen. It just.. Dies. I tried with like 5 keyboards, with USB keyboards and serial keyboards, it just happens everytime. I was an avid user of ubuntu studio back like 2 years ago, with my laptop, but with this PC (gateway GT4230m) i just cant do it anymore. Its very frustrating.
View 2 Replies
View Related
Apr 29, 2011
Just upgraded to ubuntu natty and evolution hangs.
Receive the following errors.allen@FA2096349:~/.evolution$ evolution(evolution:25316): GLib-GObject-CRITICAL **: Object class EMFolderTree doesn't implement property 'paste-target-list' from interface 'ESelectable' (evolution:25316): GLib-GObject-CRITICAL **: Object class EMFolderTree doesn't implement property 'copy-target-list' from interface 'ESelectable'
The evolution app starts, but all you get is Loading... for the folders in the side bay and the app is hung. Nothing is selectable and you have to CTRL-C out of it or use the kill app.
View 3 Replies
View Related
Mar 15, 2010
System was fine with :Ubuntu 9.04 (had also installed kde )then....I wanted to try some change to gdm so i downloaded gdm while building it , it asked "PAM" libraries to be installed so i installed PAM ... but ignored the instruction to reinstall SHADOW (library i guess..),Now :on booting system i get login menu but i am not able to login , it says some critical error occured
1) install new copy of UBUNTU and remove old
ps :1) i can log into system through live cd
2) i can use recovery mode boot and log into terminal as root(startx is not working from this terminal..
View 9 Replies
View Related
May 1, 2011
I recently upgraded to Natty and now Conky is no longer reading the temperature sensor. It permanently displays 0' Celcius. The temperature was displaying correctly before the upgrade and the mobo is brand-new.
View 9 Replies
View Related
Jan 28, 2010
I am looking for a daemon that will set the CPU to lower frequency if its temperature is going too high. I used an application like this in Windows.
View 3 Replies
View Related
Oct 12, 2010
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies
View Related
Jul 16, 2010
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg
Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
View 1 Replies
View Related
Mar 29, 2011
I'm running 32 bit 10.10 on a Lenovo N200 laptop, I have 3 other Ubuntu computers on my home network and they don't suffer from this problem, 1 is 10.10 32 bit, 1 is 10.10 64 bit and one is 10.04 32 bit. they are on the same network and I cannot see a difference.
However when update manager says there are some updates available, I can install the critical ones but not the "other updates", it tells me that they would require installation from non authenticated sources then after agreeing will not install and goes back to the start of the update process.
The error message lists ALL the "other updates" if I deselect them then the critical upgrades down load and install OK.
View 7 Replies
View Related
May 2, 2010
About dual boot system with winxp and lenny.
Storage information:
1st primary:SG 160G ATA 100
1st secondary:WD 160 ATA 133
SATA:WD 1000
2nd primary:DVD
2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup:
1.Partition list:/boot,/,/home,swap
2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying.
I solved the problem by the following way.
1.Boot with windows xp's install CD and use fixmbr on (hd0).
2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1)
After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0).
3.Reboot and Press F8 for a boot menu then I can select which disk to boot.
windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
View 8 Replies
View Related
Jan 26, 2010
I tried to install ubuntu 9.04 from wubi in windows 7 ultimate today. But it failed. I met a problem when installing: An error has occurred setting the element data. The request is not supported. The detailed information in installation log file is:
>>stdout=
01-26 13:29 DEBUG TaskList: # Cancelling tasklist
01-26 13:29 DEBUG TaskList: New task modify_bcd
01-26 13:29 ERROR root: Error executing command
>>command=C:WindowsSystem32cdedit.exe /set {d29666c7-0a4d-11df-a945-002268e2b352} device partition=I:
>>retval=1
>>stderr=An error has occurred setting the element data.
The request is not supported.
[Code].....
The request is not supported. I tried to use bcdedit /set <GUID> device partition=I: manually, but still have the same error.
View 2 Replies
View Related
Mar 23, 2010
I was trying to update from 9.04 to 9.10.
During the installation, I kept getting tons of errors. Finally something came up saying that I had to abort the installation and it did some stuff. I tried running an application, but I got an error. So I restarted the system.
The normal screen came up where I had to choose the Ubuntu stuff (I'm new to Ubuntu) in the box. I noticed that it had gone to 8.10... which I had earlier before installing 9.04, which went great. So I chose the first on and the system failed to start. I rebooted and tried all the other options, but they all had errors. Now I'm booted to Windows.
I installed Ubuntu from a CD I created. But it is now outdated because it is 8.10, and I have already upgraded to 9.04. 9.04 to 9.10 is where stuff went wrong.
View 1 Replies
View Related
Mar 9, 2011
Ubuntu - 10.04 LTS
zlib - 1.2.5
Why does GNOME fail to start correctly after compiling the latest version of Zlib?
I have analyzed the situation. Zlib does not change or delete any file on the file system.
I have asked this on three occasions over the last 8 months and no one has been able to give me an explanation, so it would be a great challenge for the Ubuntu lovers. I am also EXTREMITY interested to find out why, because I have had a hard spot negative opinion against GNOME since this occurred.
View 9 Replies
View Related
Oct 7, 2010
usually when my battery gets critically low, The system warns me to plug it in, and then it hibernates. But recently, It displays no warning, and instead of hibernating it just shuts off. It still displays the "20 minutes remaining" libnotify warning, but thats not useful if I'm doing something fullscreen.
View 1 Replies
View Related
Sep 7, 2010
I don't know why but sometimes zypper (v1.4.5) removes some of the installed packages before upgrading them.
Actually it removes it even before downloading a newer version. I just wonder what a stupid f**k implemented this behavior. I wish something awful happens to him.
An hour ago I tried to update few packages, among those were sysconfig, firefox and yast. Guess what? Zypper removed those before downloading newer versions. Due to a temporary network connection loss zypper could not download packages and quit leaving me without firefox, without yast and, what's even worse, without sysconfig package which contains essential system scripts such as ifup, ifdown etc (so my network went down completely without a possibility to restore). It's a big luck there was no new package of rpm (or it would be removed by zypper too) so I could just download those packages with my second PC and reinstall them from a memory stick.
Now I'm interested where should I file this bug, because without a doubt it's a critical one.
View 9 Replies
View Related
Apr 19, 2011
I started to use the smart plugin for munin to monitor my HDD. I changed the script a bit to report the raw value instead of the value for Power_On_Hours and temperature. It all works.
However, it now reports the values for these 2 sensors as critical, even though the power on hours is 928 and threshold is 999 (I even tried 9999) and temperature is 51 (threshold is 60).
View 4 Replies
View Related
Jul 13, 2009
Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?
View 8 Replies
View Related
May 30, 2010
Fascinatingly weird one here. First, this issue isn't on my computer, it's from someone who I am helping. I don't have first-hand access to the computer. Some background: the machine originally had Ubuntu Hardy, which we upgraded to Lucid a couple of weeks ago. Earlier this week, he gave me a call that Ubuntu wasn't booting up; it dropped to the command line. Some tinkering later, I figured out that libgthread-2.0.so had become corrupted, so X wasn't starting. It gave an error complaining that it had an invalid ELF header.I figured that this was just an odd freak occurrence; there was a bad kernel panic previously, so maybe the library was upgraded and the system was just writing to the disk at that time. Fixed via sudo aptitude reinstall libglib.
Ubuntu then started and everything ran perfectly. Today, he gave me a call. After he had restarted the computer, Ubuntu again dropped to terminal at the same point while booting. I had him open a new tty and run startx, which failed with a different shared library but the same error: libXext.so.6 has an invalid ELF header!
We had run updates, but I don't recall whether X's shared libraries were touched. Even if they were, though, that shouldn't affect anything. There were no hard resets between my fixing libgthread and libXext breaking. I'm going to try a clean install; I'm really just hoping we can figure out why this is, because it's an amazing little problem.
View 4 Replies
View Related
