My laptop pc is corrupted and it wont start up Windows and my cd rom is fried it wont work. The only way to use the pc is to run slax or any distro of Linux by USB. I want to fully install Ubuntu on the laptop but the install file is .exe and wont open up with Linux. I would like to know if there is a way to download and fully install ubuntu on my pc via USB.
View 1 RepliesBefore the other day, I'd copied a live CD to ramdisk and run it from there before, but the disk was INX (INX is not X), a live CD based on Ubuntu that runs entirely in the text mode, no GUI. INX is a terrific product: colorful, educational, light, agile, fun to use, and and often damned useful, but when an OS only uses text, you may not notice how much running from the RAM speeds up an OS. Previously, I'd assumed that the best reason to run a Live CD from the RAM was to free up the CD ROM drive. When I started running a full KDE 3.5.10 Desktop from the RAM, it didn't take me long to notice the awesome boost in speed and performance.
The computer has the fastest access to the data that's in the RAM. (The "A" in "RAM" stands for "access", right?) So the machine is faster. As the RAM gets larger, I'm sure more and more live CDs are going to offer the RAMdisk option. Right now both INX and SLAX share the characteristic of being exceptionally small CDs, and that makes them well suited for this kind of application. The "minimal" version of Slax, the basic CD without any modules added, is less than 200 mbs, which fits very nicely on my 1024MB RAM. I now use the minimal SLAX cd to initiate the system, and I keep a collection of the modules on my hard drive to copy to the RAM and activate at will.
Here's a couple of screenshots: [URL] I'm using Wine here to run my one and only favorite Windows program, a text to speech program called READ PLEASE. Note that I am also running KTorrent, which is uploading from and downloading to my external MyBook hard drive. [URL]. Here's a shot of yakuake, which is sort of like Konsole with superpowers. I just upgraded my hard drive KDE system to 4.2.3, and they still haven't fixed Yakuake yet. I know it's been reported, so I'm sure it'll be taken care of.
Is it possible to install new slax module (from slax site) on ancient backtrack 2? Or it won't work because of versions? I would like to update tor by installing this module on bt2:
http://www.slax.org/modules.php?action=detail&id=2277
No matter what distro I have used, when I run a live cd/usb installer... even without installing the OS or accessing the OS hard drive, Windows 7 freezes after logging in. Running this on an Asus G73-JH, I've seen similar problems from other people with Asus notebooks, but they have actually installed the linux OS. Running Windows home premium x64
View 1 Replies View RelatedIs there any easy way (i.e. command or file to view) to find out what distribution I am running? I know that my /etc/apt/sources.list has entries for stable, testing and unstable but I hear that (as of the 30th) "stable" has become Sarge. So if I performed an apt-get update then an apt-get dist-upgrade yesterday should I assume that I am now running Sarge?
View 8 Replies View RelatedI'd like to build a compact x86 host running off a CompactFlash or some equivalent solid-state memory instead of from a SATA disk, to reduce the risk of failure once they're deployed at customers' premises. Those are SOHO users, so performance is not an issue, but stability is (The less I have to drive to replace faulty hardware and restore data, the better.)
Do you know if the usual suspects (Ubuntu, CentOS, Gentoo, etc.) can easily be made to run from solid-state memory, and if yes, is there some good documentation to customize them thusly?
I assume it's just a matter of tweaking /etc/fstab, but it could be more involved.
Laptop has broken internal CDROM. I booted with floppy to get Puppy 431 installed from USB stick. Now I have USB CDROM access thru Puppy. I can mount and see the CD fine.
Is it possible to boot or install from a currently installed linux distro (Puppy)?
I have a second free partition ext2 available, sda2, and GRUB is working fine for me on boot.
(machine also doesn't have boot from USB option, yes, it's old, a project I am working on, I have Nimblex in CD now, I think it's a live cd, I would like to try a few different ones by installing to sda2 and wiping if ng.)
First off I am new to Linux and fairly new to working in Networking and Server config's. I have been using Windows for years and have been learning Windows Server 2003 as I have a Technet account, I can get any MS software. I would like to learn Linux and use this as my Server environment. My project looks like this: I have a Quad core, 8gb machine. I want to install a distro of Linux (server or desktop) and run Virtual Machines on it.
My perferred way would be to use Virtual Box but I could use VMware products if that was better. I would like to run WS2003, WS2008, Linux Distro and anything else that will run in a VM. I can figure out that part pretty easily. I want the Linux host machine to run all these VM's and access and use them on my MAC remotely. I have done some research on ESXi as well, but I don't think my Hardware is going to support that. My exact PC spec's are:
AMD x4 940
8gb DDR2
Gigabyte MA770-UD3
2 Velicoraptor Drives
GTX 260
I will be dual booting this machine on one of the Raptors for gaming as well.
I'm trying to run backtrack from a usb drive on my netbook. Upon loading it, i get "Fatal server error: no screens found".
View 1 Replies View RelatedI searched and found several solution but those are distro specific. I need to find out if distro is running in live mode (from CD, USB) instead it's installed on hdisk. The solution should be independent of distribution.
View 7 Replies View RelatedHow to solve this:
I've installed GIMP 2.7.1 (OS Slax), but it doesn't work. Clicking on icon doesn't start GIMP.
In Shell:
kdesu /usr/bin/gimp
gimp: symbol lookup error: /usr/lib/libgegl-0.1.so.0: undefined symbol: g_dgettext
I cannot run most of apps, including mono.
I am running Slax Linux from my USB drive and now I want to install it in my computer. What should I do?.
View 1 Replies View RelatedSo, I was playing with Fathom's new Slax Remix with Zen kernel 2.6.33 and decided to try a manual install to hdd and see if it would boot. [URL]. New slax remix is here: [URL]I surprised when after doing the install I ended up with a beautiful and fully functional KDE desktop all in 860MB of space! Although many things will break if upgrading, etc. I was impressed that with KDE running it was only using about 140MB ram! incl cache, etc. And, fluxbox is included too as well as pkgtool, and xwmconfig. The complete How-To I did is in the slax remix thread at above link, and also here [URL].
Hints:
After installing to hdd, usb-hdd, etc.
Grab slackpkg and the gnupg stuff and install any other pkgs.
Be careful about upgrading...
I added kdeadmin pkg from slax module and some other stuff so my install is at 944MB now
and look at output of "free" in screenshot.
I decided to finally give it a try last night and made a Live USB for Slax. It booted up quickly, pretty much everything worked right away, and after getting the Wifi working I decided to call it a night.
My project for today was attempting to install Java, but I haven't had much success. There are modules on the Slax site for this, but a. they are unverified and b. I want to delve into linux further than just downloading everything off a website. I downloaded the latest Java package for linux, which was a self-extracting .bin. I followed steps 1 through 4 here, but step 5 didn't work. I got the error message
Quote:
Extracting...
UnZipSFX 5.50 of 17 February 2002, by Info-ZIP (Zip-Bugs@lists.wku.edu).
inflating: jre-6u20-linux-i586.rpm
error: db4 error(2) from dbenv->open: No such file or directory
error: cannot open Packages index using db3 - No such file or directory (2)
error: cannot open Packages database in /var/lib/rpm
I then tried using the rpm -UvH command on the rpm file, but got the same error. Knowing that Slax modules are .lzm files, I used rpm2tgz and tgz2lzm to convert it to a module, but it still doesn't work. I'm hoping that someone can point me in the right direction, other than "Download this unverified module from the Slax site."
In addition, a problem I haven't encountered yet but is foreseeable: In those instructions that I linked above for downloading and installing Java, the "Enable and Configure" section requires altering parts of the Firefox install directory. However, since this is Slax, Firefox is in a module. To do that part, do I have to use lzm2dir in order to get into Firefox's innerworkings, or what?
I have a windows 98 box.I have a slax ISO and a slax TAR. My slax TAR has all the modules I want.
My windows 98 hard drive has only 1 partition and is fully formatted.I have used windows 98 to download my TAR.I want to dual boot slax and windows 98.How do I go about this? So do I have to repartition?
I installed slax to my hard drive. I am using ubuntu. In fact I think to install xp that partition of my disk but I want to try it on disk. It was ext3 already my partion which disk I was installed slax. I did my job by following commands I quoted. But my disk was sda1 and I changed command according to that. for example I gave some commands like this ( /mnt/sda1/slax ) Then my slax working but kde doesn't start. when I gave startx command it try to start. I can see desktop wallpaper but then it comes to start kde parts it turns [URL]
Quote:
sda1=/boot
sda2=swap
sda3= /
Code:
[Code].....
I am trying to connect to the net wirelessly using Slax off my USB stick. I did the best I could using the wireless configure tool but Firefox will not surf - no connection. The configure tool shows that I am 'partly' connected in that it shows signal strength in green but I noticed that there is no entry for IP address. Am I suppose to know this and enter it? In LMDE, I see the IP as 192.168.2.10 and other addresses. Do I need to enter this stuff?
View 5 Replies View RelatedI want to know exactly how to connect to the internet in slax-6.1.2 VMware Workstation program being through what it is asking how to do it on the website, I can find on Google.
View 2 Replies View RelatedI started slax in cli mode and tried to install nvidia driver before running X but it won't install. My log:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Jan 10 04:21:14 2010
option status:
license pre-accepted : false
Update : false
Force update : false
Expert : false
uninstall : false
Driver info : false ....
ERROR: Unable to build the NVIDIA kernel module.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details.
I'm not able to successfully start a KDE session(SLAX), check out the error, Code: xauth: creating new authority file /root/.serverauth.7378
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
[code]....
For years I have used a Slax live CD on a laptop to clone internal HDDs to USB HDDs. I recently purchased a Sony VPCF136FM laptop with Intel Core i7 CPU. It apparently has USB 3.0 ports. The problem is the USB ports are dead with Slax. There is a USB devise driver available for Windows 7 from Sony but nothing for Linux operating systems. Can this driver be ported to Linux? It is an exacutable (XXX.exe). The chip for the USB Host is from Renesas Electronics (no help there, either). Where can I find a device driver to use with Slax and how would I install it?
View 3 Replies View Relatednominate a disastrous distro from past or present that was simply AWFUL and what exactly was so bad about it?
View 14 Replies View RelatedI have a linux box set up as a multi-purpose server for my home with three Windows client PC's. The linux box is based on a slightly modified Slackware 9.0 distribution using Linux 2.4.20 and an unfortinately old, slow AMD processor with a miserable 512Kb RAM. The linux box serves the CIFS file system to the Windows boxes, runs the SQUID HTTP proxy, the Apache web server, a print server, does masquerading, mail serving and a very effective firewall using iptables.
This system, although slow, has run perfectly for several years.Let me say that again - This system works perfectly.I had decided that now is the time to upgrade the hardware, so I bought a Gigabyte LGA775 motherboard which has two 1Gb network interfaces on it, an ASUS 256Mb PCI-E display card, 2Gb of DDR3 RAM, an Intel Core2-Quad processor and a bunch of 500Gb SATA drives to set up a RAID5 array (but I intend that the system boot off one of several 40Gb PATA drives I have).I set up the processor, motherboard, display card, RAM, a SATA DVD Drive and a 40Gb PATA hard disk in a "breadboard" layout and installed distro 13.1, being careful to set up the static IP for the local network, dhcpcd to get an IP address from the cable modem (my internet connection) and to enable ip_forward in the network configuration.
Then I installed a script invoked by /etc/rc.d/rc.local which installed all the SAME iptables rules as my old Linux box. There was one minor glitch when I had to change 8 occurrences of "-d ! $LOCAL_NET to" "! --destination $LOCAL_NET" but that was no problem. I also set up /etc/resolv.conf, /etc/hosts , the BIND server files etc. etc. exactly as in the old box.
I am able to ping mirror.aarnet.edu.au (this is at the heart of Australia's internet hub network - if it's down the whole bloody thing is down) and have the system find the correct IP from the designated nameservers and contact that server with a return trip time of 35ms. I am able to run a telnet session from one of the Windows boxes and edit files on the Linux server. So both network interfaces work and I've got them the right way around.I am able to run FTP on one of the Windows boxes and connect through to mirror.aarnet.edu.au, although it seems to hang when I try a DIR (but then so does the old linux system).
If I install let's say Mandriva after Ubuntu, can I then just delete the partitions that it made to get rid of it or will this affect Ubuntu or else how can I get rid of it if I don't want it?
View 1 Replies View RelatedI'm about to receive a new Zotac MAG MAGHD-ND01-U and I'm wondering if perhaps it would be smarter to install UNE instead of the standard distribution. The computer will be used almost exclusively as an HTPC using Boxee. I've read that UNE has atom optimized code; that along with a smaller footprint may speed up the overall system.
View 1 Replies View RelatedI have a distro, in iso, that I want to make into a bootable DVD. what can I use....open source
View 2 Replies View RelatedI've just attempted a distro upgrade (to 9.10) and have been left with a machine in an unbootable state.
I tried using a recovery boot through Grub and can see that the boot process hangs after outputting:
Code:
swap: waiting for UUID=$random-string$
If I ESC to get a prompt, I get:
Code:
General error mounting filesystems
I can't run dpkg-reconfigure as I get a read-only filesystem error.
OK, I've tried to install:Mint 6, 7 XFCE, and 8jolicloudeasypeasyand probably another or two..Oh, I'm installing this on my Acer Aspire One 751h, so I am using a USB key and UltraISO, with the exception of jolicloud, which has its own USB creator, and most recently I tried Mint 6 using UNetBootIn.Anyway, I keep getting the same general error, but with different files... Sometimes its errno5: input/output error, and other times its parts of a file (blah/doowop/dadada/video....) I don't know if its a driver problem or what, but I've seen video, sound, and other random stuff.. each time it gives a different one though.Either way, the main paragraph in the window talks about having a dirty CD, needing to replace my hard drive, or burning a new CD at a slower speed... I've checked the md5sum, and that's not the problem.
I'm wondering if my problem is that I'm creating the USB from one computer, and then trying to install it on the 751h. Another thing that might be causing the problem, but I doubt, is the fact that when I set up the partition, I select "use entire disk". Another question, Does it make a difference if the drive letter changes? On our main computer, the USB is mapped to drive E:, but on the 751h, it shows up as D:. If I have to change it on the 751h, how can I without an OS? when trying to install linux, it wiped out my windows, and I don't feel like re-installing it just to change it in a few minutes.
I have a laptop running 8.04LTS very well and have been keeping it up to date. I'd like to have the ability to re-install 8.04 at a later time if I had to reformat the laptop. I have the latest 8.04 CD image (8.04.2 I think) but of course there have been many updates since then. Is there a way for me to capture all these updates so that I can reapply them at a later time after a fresh install of 8.04?
View 1 Replies View RelatedDifferent environments on different accounts for the same installation and distro on the same computer? How to do this?
View 2 Replies View Related