Slackware :: Slax Kde Desktop Doesn't Start
Feb 6, 2010
I installed slax to my hard drive. I am using ubuntu. In fact I think to install xp that partition of my disk but I want to try it on disk. It was ext3 already my partion which disk I was installed slax. I did my job by following commands I quoted. But my disk was sda1 and I changed command according to that. for example I gave some commands like this ( /mnt/sda1/slax ) Then my slax working but kde doesn't start. when I gave startx command it try to start. I can see desktop wallpaper but then it comes to start kde parts it turns [URL]
Quote:
sda1=/boot
sda2=swap
sda3= /
Code:
[Code].....
View 2 Replies
ADVERTISEMENT
Jan 9, 2010
Is it possible to install new slax module (from slax site) on ancient backtrack 2? Or it won't work because of versions? I would like to update tor by installing this module on bt2:
http://www.slax.org/modules.php?action=detail&id=2277
View 1 Replies
View Related
Feb 26, 2011
I have Slackware 13.1 x64 and my graphic card is ATI Radeon HD 2400 on my laptop. I install from ATI official site driver for this card and now when I try to come in System Settings->Desktop I got this error:
Executable: systemsettings PID: 13956 Signal: 11 (Segmentation fault)
Quote:
View 5 Replies
View Related
May 1, 2010
I'm not able to successfully start a KDE session(SLAX), check out the error, Code: xauth: creating new authority file /root/.serverauth.7378
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
[code]....
View 9 Replies
View Related
Feb 1, 2011
I am trying to connect to the net wirelessly using Slax off my USB stick. I did the best I could using the wireless configure tool but Firefox will not surf - no connection. The configure tool shows that I am 'partly' connected in that it shows signal strength in green but I noticed that there is no entry for IP address. Am I suppose to know this and enter it? In LMDE, I see the IP as 192.168.2.10 and other addresses. Do I need to enter this stuff?
View 5 Replies
View Related
Jan 9, 2010
I started slax in cli mode and tried to install nvidia driver before running X but it won't install. My log:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Jan 10 04:21:14 2010
option status:
license pre-accepted : false
Update : false
Force update : false
Expert : false
uninstall : false
Driver info : false ....
ERROR: Unable to build the NVIDIA kernel module.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details.
View 5 Replies
View Related
Jun 8, 2010
kdevelop doesn't start in Slackware 13.1. The output just says
Code:
...
/usr/bin/kdevelop.bin: symbol lookup error: /usr/lib/qt/plugins/sqldrivers/libqsqlite.so: undefined symbol: sqlite3_open_v2
Relevant packages installed on my system (all unmodified from 13.1):
sqlite-3.6.23.1-i486-1
kdevelop-4.0.0-i486-1
qt-4.6.2_2d3d3e5-i486-1
So it's a problem between sqlite and qt(?). Rebuild needed?
View 3 Replies
View Related
Nov 13, 2010
My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction:ATI Installer HOWTO for openSUSE usersafter installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually.i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important.now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.he graphic card is :ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
View 9 Replies
View Related
Sep 3, 2010
I recently updated to Ubuntu 10.04. On this same machine I've used Ubuntu for 3 or 4 years now. Upgrading from 8 - 9 - 10. I love Ubuntu and use it as my everyday work environment. Anyway, recently when I start my machine in the morning it boots to commandline instead of the desktop. For the last couple days I boot to safe-mode and do a package repair. Sometimes more than once. Eventually I get the desktop to start but it is annoying. When trying to boot to Fail Safe Graphics Mode(?) I get an error stating: "Fatal Server Error: No Screens." The message referred me to /var/log/Xorg/failsafe.log. Here is a snippet of the end of that log file:
[code]...
Also, I'm using an NVidia graphics card on an HP machine. I installed the "current version" accelerated graphics driver which it says is proprietary.
View 1 Replies
View Related
Jul 22, 2010
My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction: ATI Installer HOWTO for openSUSE users after installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually. i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important. now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.the graphic card is :
ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
View 6 Replies
View Related
May 15, 2010
I have a headless mythtv running 13, when there's no monitor connected X doesn't start. If I plug a monitor in it still doesn't do my any good as there's no kb/mouse either. I know the system has booted fine as I can connect to myth remotely. This a slackware or x problem? Want to run x11vnc here but without x I can't do that.
View 5 Replies
View Related
Mar 4, 2010
I need a services viewer/start/stopper for slack 13.Htop is OK but want a easier-to-use GUI like in Gnome,etc.However, I am using JWM and so need an app that is not too heavily connected to a desktop like KDE/Gnome.
View 4 Replies
View Related
Jan 8, 2010
with slackware 13.0 for one user xfce4 hangs and doesn't start..xsession.errors claim it can't open display. It works fine for other users. Also if I access the machine in question as the same user but remotely using remote X (X-terminal on my LAN) it works fine.Sometimes if I wait and count to 30 it comes up but a lot of the features don't work.During the last week have posted this question on the compuserve linux forum and also in the xfce site forum with no solutions.seems there must be something in that user's directory which is hanging it up. I keep the same /home/users directory on a separate partition so when I upgrade for new versions of slackware the /home/users remain the same - I symlink home to that partition so upgrades are somewhat seemless.
View 3 Replies
View Related
Jan 6, 2010
In ubuntu 9.10, I connect the mobile device and a icon appears in desktop, but it doesn't start and doesn't connect. I went to "network connections" -> mobile broadband -> add -> select contry, bla bla bla ->insert PIN->apply
View 2 Replies
View Related
Jun 19, 2010
This works on my Slackware64 13.1 using KDE 4.4.4, Conky version 1.8.0. This is a simple .conkyrc tweak that doesn't need feh, it doesn't have the distracting faun shadow-border and most importantly, it doesn't disappear when you click your desktop (On my system anyway). These are the relevant sections to edit:
Code:
own_window_colour black
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_transparent yes
own_window_argb_130
own_window_type override
own_window yes
I found that getting rid of the own_window_argb_values yes suggested in other fixes and replacing it with a specific alpha and then changing window type to override solved all my issues. I've noticed no bugs or strange happenings. This seems to be a common problem with a lot of workaround solutions. I think this is a much more elegant way. Edit: Not persistant... After 2 reboots it's back to normal.
View 1 Replies
View Related
May 4, 2011
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
View 8 Replies
View Related
Sep 2, 2010
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
View 3 Replies
View Related
Oct 27, 2010
I installed Ubuntu 10.10 64-bit, downloaded Adobe reader '.bin', from the terminal
It extracted and asked me for a installation location, to which i put [~]
It then finished the installation.
But when i click on the icon in the start menu or on desktop it fails to start, when i also click on a .pdf document it also fails to start!
View 2 Replies
View Related
Jul 4, 2010
Have recently tried to start ubuntu with kubuntu-desktop, but as I reboot my computer kubuntu only shows the terminal after the login and I cant get my desktop back.
View 1 Replies
View Related
Mar 13, 2011
I use Fedora 13 x86_64. Recently i installed q4 wine and booting froze with message "registering binary handler for windows applications". Then on removing q4 wine boot froze at "unexpectedly disconnected from boot status daemon".I also removed wine, smolt.
[Code]..
View 1 Replies
View Related
Jun 26, 2011
I just installed Fedora 15 with the gnome desktop which looks like the android system for mobile phones, I installed wine which put the icons on my desktop but whenever I install a windows app it doesn't put an icon on my desktop for that particular application. How would I add an icon for those window apps so I can lunch them from the desktop, I don't know if you call that the desktop or just the program luncher either way how do I put an icon there so I can run those windows apps from there?
View 4 Replies
View Related
Sep 25, 2010
While I was trying to drag the Desktop icon to the places sidepane in nautilus file browser so that I can have it above Documents icon, I accidentally dropped it in Documents icon. I immediately deleted the "Desktop" shortcut that was created in "/home/user/Documents" but it was too late already and the damage has been done. When I try to create a new document on my desktop, it says "Error while coying to Desktop There was an error getting information about the destination. Show more details Error stating file '/home/user/Documents/' Desktop':No such file or directory" Now, I know that my desktop now is pointing me to a location in Documents folder which doesn't exist at all. I tried looking for any available settings/options in gconf-editor, but only in vain.
View 4 Replies
View Related
Oct 26, 2010
How to solve this:
I've installed GIMP 2.7.1 (OS Slax), but it doesn't work. Clicking on icon doesn't start GIMP.
In Shell:
kdesu /usr/bin/gimp
gimp: symbol lookup error: /usr/lib/libgegl-0.1.so.0: undefined symbol: g_dgettext
I cannot run most of apps, including mono.
View 1 Replies
View Related
Feb 7, 2011
I am running Slax Linux from my USB drive and now I want to install it in my computer. What should I do?.
View 1 Replies
View Related
Apr 19, 2010
So, I was playing with Fathom's new Slax Remix with Zen kernel 2.6.33 and decided to try a manual install to hdd and see if it would boot. [URL]. New slax remix is here: [URL]I surprised when after doing the install I ended up with a beautiful and fully functional KDE desktop all in 860MB of space! Although many things will break if upgrading, etc. I was impressed that with KDE running it was only using about 140MB ram! incl cache, etc. And, fluxbox is included too as well as pkgtool, and xwmconfig. The complete How-To I did is in the slax remix thread at above link, and also here [URL].
Hints:
After installing to hdd, usb-hdd, etc.
Grab slackpkg and the gnupg stuff and install any other pkgs.
Be careful about upgrading...
I added kdeadmin pkg from slax module and some other stuff so my install is at 944MB now
and look at output of "free" in screenshot.
View 4 Replies
View Related
May 21, 2010
I decided to finally give it a try last night and made a Live USB for Slax. It booted up quickly, pretty much everything worked right away, and after getting the Wifi working I decided to call it a night.
My project for today was attempting to install Java, but I haven't had much success. There are modules on the Slax site for this, but a. they are unverified and b. I want to delve into linux further than just downloading everything off a website. I downloaded the latest Java package for linux, which was a self-extracting .bin. I followed steps 1 through 4 here, but step 5 didn't work. I got the error message
Quote:
Extracting...
UnZipSFX 5.50 of 17 February 2002, by Info-ZIP (Zip-Bugs@lists.wku.edu).
inflating: jre-6u20-linux-i586.rpm
error: db4 error(2) from dbenv->open: No such file or directory
error: cannot open Packages index using db3 - No such file or directory (2)
error: cannot open Packages database in /var/lib/rpm
I then tried using the rpm -UvH command on the rpm file, but got the same error. Knowing that Slax modules are .lzm files, I used rpm2tgz and tgz2lzm to convert it to a module, but it still doesn't work. I'm hoping that someone can point me in the right direction, other than "Download this unverified module from the Slax site."
In addition, a problem I haven't encountered yet but is foreseeable: In those instructions that I linked above for downloading and installing Java, the "Enable and Configure" section requires altering parts of the Firefox install directory. However, since this is Slax, Firefox is in a module. To do that part, do I have to use lzm2dir in order to get into Firefox's innerworkings, or what?
View 2 Replies
View Related
Jun 12, 2011
I have a display problem since updating to Slackware 13.37. Everything was fine on Slackware 13.1, but when I switched to 13.37 some piece of software came up with the wrong monitor size. I have a 1600x900 LCD monitor but the X screen came up as 1024x768 with blackness on either side of it. Under Slackware 13.1 the X screen came up as 1600x900 as it should without any prompting from me; I didn't even have an Xorg.conf file. I tried using the Xorg.conf file which was needed and work for older Slackwares, eg 12.*, but it didn't work. (Saying it didn't work is a gross understatement! That old Xorg.conf completely screwed up mouse, keyboard, and monitor; the screen was flashing and nothing worked. The only way to get control back was to SSH into the machine from my laptop and reboot. Killing the X server via that SSH console did NOT the flashing or get me back to my console login; only reboot worked.)
I find I can get the screen to be the right size manually by going through KDE's "System Settings" --> "Display and Monitor" --> "Size & Orientation", then disabling "LVDS1" and setting VGA1 to 1600x900. The size of my odd-sized monitor is being correctly detected for the "Auto" choice. Upon reboot LVDS1 stays disabled but VGA1 reverts to 1024x768 so I have to do this each time.I've done some search of the on-line literature regarding the error messages I am seeing in the boot log.
People are suggesting changing all kinds of things to alleviate the side effects of the "conflicting" error message above, even modifying GRUB parameters (which won't work for me since I use LILO).So, I have a manual work around which I must do each time I log in. Does someone know how I can get X or KDE to force 1600x900 upon start (while Linux/X/whoever find and fix the problem) or does someone know of a real fix?
View 6 Replies
View Related
Jan 5, 2010
My laptop pc is corrupted and it wont start up Windows and my cd rom is fried it wont work. The only way to use the pc is to run slax or any distro of Linux by USB. I want to fully install Ubuntu on the laptop but the install file is .exe and wont open up with Linux. I would like to know if there is a way to download and fully install ubuntu on my pc via USB.
View 1 Replies
View Related
Sep 26, 2010
I have a windows 98 box.I have a slax ISO and a slax TAR. My slax TAR has all the modules I want.
My windows 98 hard drive has only 1 partition and is fully formatted.I have used windows 98 to download my TAR.I want to dual boot slax and windows 98.How do I go about this? So do I have to repartition?
View 7 Replies
View Related
Mar 4, 2011
If I use Dosbox in full screen mode, and then exit back to KDE, my desktop icons get shuffled around.I'm using the desktop folder view in KDE 4.4.3I've noticed that this also happens with ScummVM as well, so I think it's more a KDE issue?
View 3 Replies
View Related
