Debian Installation :: Installing Next To Windows (dual Boot)?
Dec 13, 2010
I've recently bought a new computer and installed Windows 7 on it, but left 100GB of space on a separate partition so I could put Debian next to it in dual boot. I have the new Intel i7 950 processor and I run Windows 7 Proffesional 64 bit, so I assumed I had to pick the ia64 debian image. However the CD I burned from the ia64 image didn't boot. (a black screen started and an underscore kept flashing, but nothing else happened)[URL]
I've managed to install i386 Debian on a older intel pentium 4 computer before and that worked fine. I believe I used another application to burn the CD then. This time I've burned the CD with the default Windows CD burn application. I can try burn more CD's but I don't have much left so I want to make sure this is the problem before attempting again. (the burned files on the ia64 CD look exactly the same as the files on the i386 CD, when browsing through the cd files in windows) "If your PC has a 64-bit AMD or Intel processor, you will most likely need the "amd64" images (though "i386" is also fine), the "ia64" images will not work."This seems a bit strange, they recommend me to use the amd64 image if you have a "64-bit AMD or intel processor". I dunno if this is a typo, but it seems weird to me that the AMD-64 Debian version would also work on my Intel machine
View 11 Replies
ADVERTISEMENT
Mar 26, 2010
me a easy and right answer to this post
View 3 Replies
View Related
May 2, 2010
I installed Lucid Lynx on a dual boot with a previously installed copy of Windows 7 and everything installed fine via Wubi...but now when I boot up and I get to my Boot Mgr and select Ubuntu I get the following message and can not get past a black screen stating -
Try (hd0,0) EXT2
I have tried to read what others have done to fix this but nothing has worked so far,Also I can still log into Windows 7 just fine, just no Linux...
View 2 Replies
View Related
Feb 16, 2010
I'm currently dual-booting Vista and Win 7. Do I have to install Grub or can I continue to use the Windows boot loader?
View 5 Replies
View Related
Mar 15, 2009
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies
View Related
Feb 1, 2011
I have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
View 2 Replies
View Related
Dec 15, 2015
I'll start off with stating my problem and summarize how I got to it.
I installed Windows 10 on an SSD. I installed Debian 8.2 after it. The SSD was/is a GPT disk. I installed both installations from a UEFI booted device (DVD for Windows, and USB drive with Live CD for Debian).
I tested it after each installation making sure I could boot via UEFI into Windows, then Debian, then Windows, to make sure nothing broke.
I rebooted the machine. Suddenly, no more UEFI. Nothing. I didn't change any BIOS/UEFI setup menu settings. Not even my USB drive with Live CD will boot through UEFI anymore. Even when nothing else is plugged into the system.
My situation is actually a bit more complicated than that, but I think that will suffice for now. I can still boot into the Live CD on the USB drive, just in Legacy mode only. I mounted the EFI partition on /mnt/boot after I mounted the file system for Debian on /mnt. It is identical, as far as I can tell, to as it was before when it was working.
My motherboard has CSM and Secure Boot, both have been set up how they need to be to boot UEFI into Debian. Tinkering with them further after things broke did not fix it. I tried all variations of options/settings.
The GRUB Reinstall guide says to be in EFI mode before starting it, so I can't do that.
My motherboard is an ASUS X99 Deluxe, and I've heard ASUS has special "features" (read: bugs) that come with their boards. Searching hasn't brought up any other people with this issue. I believe the firmware is updated to it's most current one.
I've tried dd-ing my backup of my old system, from before trying to migrate to a Dual Boot system, to the SSD (after backing up the dual boot setup with dd -> <name>.img via the Live CD USB). However, that won't boot either as it is a UEFI install as well.
The layout of my EFI partition is as such:
/boot/EFI/Boot/bootx64.efi
/boot/EFI/Microsoft/<Microsoft-naming>.efi
/boot/EFI/debian/grubx64.efi
I've heard that the standards on how that's supposed to be set up isn't a standard. However, since it worked booting into the OS' the first time, I don't see how that could be the issue (a bad hierarchy layout leading to the UEFI not being able to see the OS installs).
I've seen that I can boot to an EFI shell (called Shell.efi, apparently) via an option in my UEFI BIOS setup menu on my motherboard. Is that an option here to somehow bypass this strange issue?
All I can think to try is burn it all and start over. But not knowing what caused it means I could just make it happen again. Plus, I can't boot into UEFI install media, so I can't install UEFI boot OS'. :/
View 5 Replies
View Related
Aug 30, 2014
I recently installed Debian 7 on a dual boot with Windows Vista. Thus, when I boot the computer, I am prompted by a GRUB screen to select Windows Vista loader, Debian, and Debian (recovery mode). I would like to upgrade Windows Vista to Windows 7. Will this cause an issue with GRUB? Will a Windows 7 loader be added to the list or will a Windows 7 loader replace the Windows Vista loader? Will there have to be a setting change within Debian? Within Windows?
View 6 Replies
View Related
Sep 4, 2015
I have a Dell laptop (inspiron 1150) which was dual booting Windows XP and Ubuntu 9.04. I have successfully installed Debian Jessie Standard over the Ubuntu. I pre-partitioned using gparted-live to make a separate single partition for the Debian install. Guided partitioning was then carried out by the installer producing separate /, /home, and swap partitions. After installation, the grub menu shows an entry for Debian and Windows XP. I can boot Debian, but not Windows XP. The symptoms are the same as reported in other forums: A terminal is displayed, vanishes and the system reboots defaulting to the Debian boot.
The grub.cfg file for the Jessie system has an other-os entry:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
set root=(hostdisk//dev/sda, msdos2)
search --no-floppy --fs-uuid --set=root cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The original Windows entry for the Ubuntu install was:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The partitions produced by partman look OK (during the pre-partitioning I did not touch sda1, sda2, or sda3):
Code: Select all~ # fdisk -l
Disk /dev/sda: 37.3 GiB, 40007761920 bytes, 78140160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code] .....
Partition table entries are not in disk order.
The os-prober found XP:
Code: Select all~ # os-prober
/dev/sda2:Microsoft Windows XP Home Edition:Windows:chain
So it seems that everything is in place, but there are perhaps important differences in the grub.cfg files. Are the two "set root" commands equivalent for example?
View 5 Replies
View Related
Dec 28, 2015
I have Windows 10 and Deb 8 dual boot, and I need to re-install Windows but want to avoid (or at least plan for) losing Grub/Linux boot.
Last time I re-installed Windows after Linux I ended up having to re-install Linux again afterwards as well, because I couldn't recover it (seemingly due to complications from encryption). So this time I'm wanting to plan and avoid that.
CURRENT DISK PARTITIONS:
Code: Select allsda1 | 550M | EFI System
sda2 | 128M | Microsoft reserved
sda3 | 175.8G | Microsoft basic data
sda4 | 286M | Linux filesystem (Boot)
sda5 | 28.2G | Linux filesystem (Root)
sda6 | 91.3G | Linux filesystem (Home)
sda7 | 1.9G | Linux swap
[Code] ....
As there is a "Microsoft Reserved" partition and a separate Microsoft directory within the EFI partition, if I just go ahead and reinstall Windows will it install it's boot loader/image to one of it's own partitions? And NOT affect anything else like Grub and other Linux things?
Logic tells me yes, but there seems to be many issues on the internet about installing Windows after Linux.
My primary concern is whatever happens with Windows or anything to do with dual loading etc, is that Linux will still just boot, or I can get it working again without much hassle.
Why is there a reserved Microsoft partition AND a Microsoft directory in the EFI partition? Which one boots Windows?
Why is there a separate Linux Boot partition AND a Linux directory in the EFI partition? Which one boots Linux? Where is Grub invoked from, is one redundant, etc?
How these work. It is possible I've set them up wrong, or with redundant partitions, but both systems have been booting ok for months.
View 3 Replies
View Related
Feb 3, 2016
I've been using Debian for a few years but always on dedicated boxes and/or VMs.
Finally decided to dual boot Debian and Windows on my main Desktop PC.
Installed as I normally would using, however this time using a seperate drive (one for the existing Windows 10 install and the other for Debian), Debian install detects that windows has an EFI partition and sticks an entry in there, which is fair enough, and everything working fine. Then I spent some time configuring all my software and set it all up just the way I like it. I've rebooted Debian a few times to check it's working correctly and it is.
The issue arrives when I reboot and load into Windows 10. It boots fine.
However after a further reboot GRUB no longer loads... and the machine just boots directly into Windows 10.
After doing some further digging into my EFI partition (and reinstalling various times) it would appear that after a reboot Windows 10 deletes the entry GRUB creates in my EFI partition after EVERY reboot.
Done some googling and most people advise turning off 'fast boot' in Windows as it locks certain partitions to facilitate the machine going into hibernation, only to find that it's always been turned off on my machine (I recall due to a driver issue with my graphics card this had to be turned off when I installed Windows 10).
I've found this article on the Ubuntu forums : [URL] .... however I've tried their steps and windows is still doing a hostile takeover of my EFI partion after a reboot!
Any way to stop Windows 10 from interfering with my EFI files after a reboot? (without doing the obvious thing and kill Windows off).
View 4 Replies
View Related
Feb 1, 2011
I have used dual boot systems using various versions of windows and Debian for many years and have encountered no problems. However, I have a problem with installing Debian on a EeePC (ASUS PC1201) which uses Winows 7. I can not even get started because I can not understand the information that I have on my hard drive partitions. Windows 7 says that I have the following :
Local Disk(C:) 78.1 GB free of 99.9GB
Local Disk(D:) 49.8 GB free of 83.8.GB
NewVolume(G:) 948 KB of 0.99 GB
Local Disk(F:) 37.9 GB free of 38..0 GB
(Originally the ASUS only had two partitions C: and D: I used Gparted to genetate F: and G:)
gparted-live-0.7.1.5 says that I have the following :-
/dev/sda1 ntfs 992.5 KB
/devf/sda2 ntfs 100.00 GB with 66.09GB unused
/dev/sda3 ntfs 132.88GB with 129.88 GB unused
unallocated 1.00 GB
Debian Squeeze (the net install version) will not install. G was the result of trying to provide some swap space. How do I prepare the hard drive so that Squeeze it will install on F: ?
View 5 Replies
View Related
Jul 29, 2011
how to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.
View 3 Replies
View Related
Jan 28, 2011
is it safe to install a dual boot windows 32bit and a linux 64bit on the same pc?
View 14 Replies
View Related
Jun 10, 2010
I'm looking for a good partition scheme to install BT4 dual boot with windows 7, I've freed up about 160 G for my install and was going to use BT4 as an everyday distro and wanted enough space to install extra packages like vlc and what not as well as use wordlist.sh to create a substantial dictionary. These are my initial partitioning plans 3G /,6G usr, and about 3G swap with the rest being /home for word lists and whatnot would you mind sharing your partitioning setups so I can make this efficient as possible?
View 2 Replies
View Related
Jun 27, 2010
So I finished downloading Windows XP Ultimate (It is real. It's not officially supported by Microsoft) and I expected it to be small like Ubuntu was. I only have a CD-RW drive. I realized the extreme size difference with Ubuntu over 600mb and XPU over 4gb. I know how to modify partitions from the Live CD. I'm wondering if it's possible to install XPU or any version of XP while the operating system is active. It was possible with Windows 98. This might be the wrong place to post, but I really want to dual-boot Windows. Linux is great, but I would like to use SOME of my stuff without WINE.
View 1 Replies
View Related
Aug 22, 2010
I have an Asus Xonar DS, and am getting no sound in Windows whatsoever. I'm pretty sure something in Ubuntu is causing the problem as this only started happening after I installed it. I used to get heavily distorted sound in Windows, and now nothing at all. I've tried removing pulseaudio and disabled alsa, restarted ubuntu and then went into Windows, and it didn't help. Sound is 100% fine in ubuntu.
View 9 Replies
View Related
Apr 5, 2011
I want to set up my PC so that I have Windows 7 installed on one hard drive and Ubuntu Studio installed on a completely separate hard drive. I currently have both hard drives installed in my PC and the larger one (640GB) has Windows 7 installed and is currently taking up that entire drive. My other hard drive (160GB) has a wubi install of Ubuntu 10.10 on it so it shows up on the Windows boot menu. What I want to do is wipe the smaller hard drive and install Ubuntu Studio on it and have it show up in the boot menu just like my wubi install does.
I need to know things like:
1. When I install Ubuntu Studio, do I install the boot loader to the MBR of the hard drive I'm installing it on?
2. How exactly do I add Ubuntu Studio to the Windows boot loader?
View 4 Replies
View Related
Nov 23, 2010
I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
View 7 Replies
View Related
Mar 9, 2010
I got to the part where I'm supposed to partition Mint. I've got a 500GB hard drive, and I thought I'd give 300GB to LM--but I'm unclear about using ext2, 3 or 4. What about the swap file? Is that automatic?
View 10 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
Oct 14, 2010
i currently am running windos 7 (64 bit) and would also like to install ubuntu on a second hard drive. i understand a dual boot is easy enough to do, but i'd like to install ubuntu so that it and windows are completely isolated. rather than be prompted with a boot screen to choose os, i would do so by changing hd boot priority in bios. i'd like the end result to be 2 separte computers in one box. can it be set up this way, and if so, how?
View 5 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Apr 30, 2010
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
View 9 Replies
View Related
Feb 17, 2010
I have been running Ubuntu 9.10 and Win XP Professional as a dual boot system, with each OS on its own HDD, smoothly and seamlessly since the release of 9.10. Yesterday one of my kids got a video file from a friend and it had a virus along with it. Long story short, in the process of trying to repair it Windows shuddered it last agonizing breath.
Now I have to re-install Windows because some of the programs the schools make them use require Windows. How do I go about doing this without damaging my Ubuntu installation? Will re-installing on a second drive affect GRUB?
View 9 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Jul 18, 2010
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
View 2 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
Nov 8, 2010
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
View 8 Replies
View Related
Jan 5, 2011
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies
View Related
