Ubuntu Installation :: CD Crashes After Boot Screen
Mar 29, 2010
I have a older computer that i am trying to load ubuntu on it. I can put in the CD and restart the computer and the boot menu will pop up, I can click any of the options like install ubuntu or anything else but once i click it, it will take me the another screen where it will say loading... please wait then it goes away and i sit there looking at a black screen for 20 minutes while nothing happens. What is wrong why cant i install ubuntu, or anything else except for windows.
At random times, natty crashes for no obvious reason. The desktop will freeze for about 3 seconds, and then everything goes black. But it seems that everything is still running, because I was able to hit ctrl-Alt-f1 and it worked. This has happened ever since I upgraded to natty yesterday, but is becoming more frequent
After upgrading my netbook (Eee 1005HA) from Ubuntu Lucid to Maverick, I can log in okay, but it crashes back to the login screen a couple of minutes after logging in, after the desktop has loaded. I haven't been able to find anything in syslog/dmesg/etc. about why this is happening, but it isn't happening on my other laptop which I just upgraded to Maverick as well.
Edit: memtest86+ showed no errors and the live USB desktop works fine.
It has been a few days I'm struggling to install Kubuntu 10.10 on my computer. I started with the normal CD, burnt it and boot the computer. Halfway through the graphical installer, I got a black screen and system froze up. I tried several things (including running the installer with nomodest and single options) but didn't help.
Then I downloaded the alternate CD and started to install in the text mode. I could get passed installing the kernel and programs but right after adding a user/password, the text installer crashed with a black screen and system froze!
Now, I already have Windows 7 64 bits on this computer and have done all kinds of memory/hardware tests on it and it works fine. The CPU, GPU and the case is well ventilated so nothing is overheating. I also run heavy loads on Windows (MATLAB, Chess engine tournaments) for hours and hours and never had a crash. So I guess the hardware is fine.
Here are the specs of the system if it can help:
CPU: i7 950 GPU: ATI HD5870 (model Gigabyte GV-R587UD-1GD) RAM: 12 GB DDR-1666 Motherboard: Gigabyte GA-X58A-UD3R (rev. 2.0) Optical drive: Liteon ihbs112 USB Mouse and Keyboard
Windows is installed on a SSD and I have 2x 2.0TB hard disks for data. Kubunto, however was being installed on a separate and dedicated 200GB hard disk. During installation process I format and partition this drive. I didn't disconnect/disable the other drives. In BIOS, all SATA controllers are set to run in AHCI mode.
My primary suspect is the graphics card. However, why it would ever crash even in the text mode? Although it works fine in Windows even with heavy gaming so graphics card is itself stable.
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
When I attempt to install the OS on my PC, the install software crashes immediately after I select US-English on the first screen. I'm copying the entire error report below. My system is configured as follows: Gigabyte P35-DS3R motherboard with 4G RAM. (FYI, I'm using the 32-bit LiveCD just because I may need a 32-bit OS for some purposes. I know this means I may not be able to use all of my RAM.) There are 3 500G hard drives connected to the computer. /dev/sda and /dev/sdb are RAID-1 mirrors via the on-motherboard ICH9R RAID chip. The logical partitions show up as /dev/dm-1, /dev/dm-2, /dev/dm-3, /dev/dm-4, and /dev/dm-5. When I type `fdisk -l`, I can see sda, sdb, and dm-* all separately. (I can provide the full output of `fdisk` if anybody wants to see it.)
/dev/sdc is a standalone drive without RAID.
I want to install Fedora on /dev/dm-2 with swap on /dev/dm-5. Currently, /dev/dm-1 and /dev/sdc2 each contain a separate installation of WinXP. I suspect the problem is with detecting RAID, thus I have deleted most of the error report that doesn't seem to concern storage detection.
I have a Dell Studio 14 laptop with Windows 7 64bit preinstalled. The processor is core i5 and the machine has 4GB RAM. I freed 25GB of memory from my Hard disk and tried to install Ubuntu 10.04 (AMD). Everything went fine. I restarted and Logged into Ubuntu. It worked like a charm. Then I restarted to Windows7. This also worked well as expected.
But, when I rebooted again, I got a black screen saying that �No modules found. Press any key to restart� When I press a key, it says �No operating system found�, probably after checking through a network (it printed lines starting with PXE).
I tried exactly in the same way with Ubuntu 8.04 in my machine, and this worked without any problem. The Bootloader was not corrupted after restarting from Windows. I noticed the problem with Ubuntu 9.10 and 10.04. I feel like a problem regarding the bootloader version. AFAIK, 9.10 and 10.04 is using GRUB2 when 8.04 use the old version of GRUB. Will I have to switch to the legacy GRUB? (I would love to keep using GRUB2). If yes, I would like to know How.
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e, 4 gig of corsair dual ram, ati 4850 graphics, onboard audio. ahci mode win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2, i had this configuration running fine for 2 months without boot loaders, on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
i just upgraded from 10.10 to 11.04 and am using the "classic" gnome 2 interface. i have an ati card, currently powered by the standard fglrx drivers. something must be wrong with compositing, because when i mouse over avant window navigator, indicators, menus, drag files, etc, there is a good (but still random) chance of it breaking my display.
just for the record, i have tried this with the newest catalyst drivers from the official website, the fglrx drivers from the repository and without any fglrx drivers at all. i am running a patched version of emerald that works with the included compiz, but i still get the same crashes with metacity's window decorator and without avant window navigator. indicator menus will just crash the screen from gnome-panel.
i had also gotten this same problem in a previous natty install using unity.
edit: hmm, disabling compiz seems to keep the crashes at bay, so i think this is a (major) compiz bug. does anyone know which logs i should include in my bug report?
Whenever I try to run something that goes full-screen, the display crashes (a bunch of random vertical colored lines) and the only thing I can do it press the power button and reboot. Anything I can do to fix that? (I know my profile says 8.10 Intrepid; I'm working on a friend's comp, which has 9.10 Karmic.)
I've been having some problems with xorg and sometimes when I go into a fullscreen app such as Supertux (The stable package) or Sonic Adventure DX in Wine and exit out of those applications or any other ones my whole X-server crashes.I'm using an Intel GMA965 card on an inspiron 1525 laptop
I upgraded 10.04 to 10.10 (32bit), the upgrade process didn't go that well because first it didn't boot beyond GRUB. Solved this by unplugging my keyboard (my ubuntu is a server machine without keyboard or mouse, I like to use the desktop version through vnc). After that is booted to shell, which was not so nice either. This time it was the legendary nouveau driver which sorry for my language I will never install again (caused major problem twice already). Installed nvidia drivers and got a display for X this time and it booted nicely to login screen.
My problems have arised since the upgrade, the system will randomly "crash" and go straight to login screen, ending my current session. Sometimes my mouse cursor even changes to the X-mark. I can't see anything in gdm, x11, syslog etc. that would explain the crash. So far I've found best log from .xsession-errors which is here:
[Code]...
I got a lot IPv6 errors on the same log too, but those were caused by utorrent+too old wine. Didn't remember that upgrade deletes/disables extra-repos and I was running the stable wine (1.2.1) instead of the latest one (1.3.7). Upgrading wine solved the error from utorrent IPv6 connections.
So any ideas what I could do to fix these crashes? I'm not so much into clean re-install because of all the configuration I'll need to do then. I do have home on a separate partition but there's lots of software to install and configure.
I saw some pictures of Kubuntu online and thought it looked awesome. I installed it from Gnome using the command "sudo apt-get install kubuntu-desktop". It installed fine, no errors. I logged off and picked Plasma Workspace or whatever its called from the menu and it showed a black screen for about 7 seconds, then showed a clear bar with a hard drive icon fading in. Then it crashed back to the login screen. I rebooted and tried again: same thing. I installed xfce and it works perfectly. Gnome still works. Ditto for Unity. But kde keeps crashing. PS: Graphics card is an ATI Radeon.
i have Ubuntu 11.4 on my net-book and everything has been nice and good since its release and i really have been enjoying it until recently.... It seems as if for some unknown reason while i am using ubuntu my monitor would go dark with a message at the top with something along the lines of:Batter meter check [OK]after a few seconds of the screen like this Ubuntu would crash and go strait to the login screen as if i had just turned on my computer... This is a very serious problem for i am a student who types alot of essays and needs a reliable computer.
I have had Natty installed for sometime now, and this happened once or twice before where it crashes all of a sudden to a black screen with some text on it, but I don't think there is anything particularly useful in the text. The problem is, in the last couple of days this has happened quite a few times, which shows that something is wrong.
I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.
I have a new install of xubuntu 10.10, everytime I try to choose a screensaver the user session crashes back to the user login screen? The video card is an onboard ATI Savage on a Gigabyte motherboard.
I'm running a dual boot Win7 and Ubuntu 10.04. I have them both partitioned on a 1TB drive and I also have 2 250gb internal hd's hooked up. So starting maybe yesterday, I was noticing that Win7 started crashing for absolutely no reason whatsoever where it freezes and the mouse and keyboard are unresponsive. Today I did a system restore because I was tinkering in the registry so I thought that could have been the issue. Crashed once since. But runs longer. I also checked the event log and doesn't divulge anything explaining the system crash.
And just now, I tried booting up Ubuntu and after grub, the purple splash screen flickers back and forth to the text based terminal startup. All I could make out once was "could not read partition table." that was really the only significant thing I could make out. It flickers too quickly for me to really catch what its saying.
I like movie player since it reminds me of the Windows Media Player, which I loved.However, when i put a song on full screen to go to bed for the night, it crashes after a few songs. Not only does it crash, but I have to do a full roboot. Alt F2 doesnt work, and I can't escape it. I'm more or less stuck in a black screen.
Last weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.
[Code]...
I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.
I have searched the forums on this problem and I am still not really clear on the fix for this or even if I should wait for final release. I am running Lucid 64bit and have upgraded through the cycle from Karmic. I am using nvidia proprietary drivers. All the time that the Plymouth boot screen has been available it has been in low resolution. As we are now at beta 2 I am torn between searching a fix or waiting for the final release. So, from what I have read I need the 'nouveau' driver to fix this issue.
1. How do I install this in place of my existing nvidia proprietary driver?
2. I am a little bit confused by the hardware drivers selection panel telling me that I have an nvidia driver installed but that it is not in use-I read that this might be a bug?
I just recently installed Ubuntu 10.04. Every time I boot it up the screen flashes, like going off, then on again. It won't stop doing that. I can see the screen for 1 sec then it goes black, and keeps repeating this.
I have a blank screen on boot up. Has happened since 10.04.It's this problem[URL]I tired their three solutions did not work however clicking F6 and slecting nomodeset before booting got farther then ever and then saidI have tried different images, betas RCS full versions, netbook, derivatives and its all the same.hats going on? Can it be fixed and is this always going to happen now or is it just a two cycle bug?
I have a HP EliteBook 2730p. lspci reports this for my graphic card:
Code: 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 30eb Flags: bus master, fast devsel, latency 0, IRQ 30
[Code]....
I updated from Lucid to Maverick. When I boot with the new 2.6.35-22 kernel the screen stays blank after grub. When I boot the old 2.6.32-25 Kernel everything works fine. I tried to boot 2.6.35-22 in Recovery Mode. When I do this I see some kernel messages in text mode and then the screen goes blank again.
I upgraded 10.10 from 10.04 from the update button from within the update manager. It seemed to upgrade ok but after I shut down and turned it back on it goes to a blank screen. If I then hold the power button to turn it off and back on it then loads to a boot screen where about 6 options with recovery option are listed. The top 2 options do not work as they just go to a blank screen but the bottom 2 give me some other choice including seeming to boot up to a normal Ubuntu environment. How can I fix it so that it boots to a normal Ubuntu 10.10.
I have a toshiba satelite pro laptop (can't think of the exact model at the moment) with 4gb ram + 320gb hard drive. i have been dual booting ubuntu for roughly a year, and throughout all that time windows has become less and less used, therefore last night i took the plunge, and went about installing ubuntu(10.10) as my main operating system and removing windows, i did this via a usb, using Unetbootin.
I used one of the .ISO's from the official ubuntu site, and went through the installation processall went well, no errors within the installation process, hard drives were partitioned fine etc, however when i've come to turn my computer on for the first time this morning i get a black screen with a blinking underscore straight after the toshiba logo flashes up and i get the choice to go to bios options.
If i do go to bios options my hard drive is listed fine, and if i try to boot from my usb again, it doesnt work, and attempts to verify dhcp and eventually tells me it couldnt find a boot file, my laptop however is plugged in via an ethernet cable. it doesnt work with or without the ethernet cable. i have tried leaving it for about half an hour and nothing has changed, i also can't boot to GRUB.
After the last kde updates, when i try to set up the Sonar screensaver to ping 254 hosts it crashes KDE and returns to login screen. Does any one have that response from sonar or am i alone? Edit: slackware-current, no compositing, Asus EEEPC 1215N
I have an alienware m17 with an Ati graphics card. I was able to log on and install all current updates as well as the card driver update where I was then prompted to restart. Upon doing so, I get the grub loading plus splash screen. My screen then goes blank followed by a noise in my laptop. I have tried nomodeset as well as taking out splash nothing has worked. Also, upon booting up I get lucky if I can get into Recovery mode.
