This is effecting fsck check too as it will freeze up till I hit escape. After which it runs fine at boot up. It has drove me batty trying to correct. Worked on 8.04 but my Alfa wireless usb would not run on that Kernel. Up graded to 8.10 worked fine no Alfa wirless. Last upgraded to 9.04 Alfa working great but boot up is not right?
View 2 Replies
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies View RelatedFirst, let me start off by saying that for the past 5-6 months I've been using Linux stand-alone without Windows at all. Recently though, I got netflix and found that there is no support for Linux distros. So, begrudgingly, I installed a small Windows Partition on my computer. So here's the problem: I can't boot back into Ubuntu. Whenever I turn on my computer, it automatically boots up into Windows 7. I know my Ubuntu partition is still there, because when I boot from my live disc I can see it. Is there a way I can fix this using Windows and/or a live disc?
View 5 Replies View RelatedToday, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
View 3 Replies View RelatedI am pasting sudo commands without problems as a user (ales in my case) and then immediately the ask the user password.
The keyboard seems to be dead, no keys work, not allowing me to enter the password.
Succeeded in connecting to internet using my wll phone. I can now connect using 'wvdial' command in root terminal. But I want to connect through terminal. I tried 'sudo wvdial' command. Then I am asked for my password. But I cannot type my password there. When I type, nothing appears on the terminal window. Ofcourse there's no problem with my keyboard.
View 5 Replies View Relatedmy desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
- Press the <Enter> key to begin the installation processisolinux: Disk error 80, AX=42BA, drive 94Boot failed: press a key to retry
View 4 Replies View RelatedI installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?
View 8 Replies View RelatedI have installed 1. ubuntu 10.04 on a different partition of a windows 7 machine.and it is order of the boot menu is
1. ubuntu 10.04
2. memtest
3. window 7
Then I install kubuntu 10.04 and the boot menu is
1. kubuntu 10.04
2. memtest
3. window 7
4. ubuntu 10.04
how can I make ubuntu 10.04 my 'default' (i.e. if i don't select anything it will boot that OS)? How I need to scroll down to 4 and then click ENTER.
Disappearance of ubuntu screen off and not being able to enter it. To solve this problem we have to we add to Menu List And through the opening of Fedora menu.lst
[code]...
But the most important point that must do it is to decrease 1 of partition. In the sense that the partition (hd0, 3) becomes (hd0, 2).
I downloaded the iso for my system (desktop x86 32bit) and I get the computer to open the install menu. I pick english, and then it wont let me select an install option. Arrow keys work, function keys work, even pressing enter gets the cd to spin in the drive, but it wont progress to loading the install files...
View 1 Replies View RelatedI've just upgraded from 9.10 on a system that has an encrypted root partition encrypted using the following guide:
[URL]
On boot, prior to the LUKS password prompt, I see the error:
Code:
cannot open file /etc/console-setup/boottime.kmap.gz
The consequence is that the keyboard does not respond, the password cannot be entered, and the root partition cannot be unlocked.
This behavior occurs on all 2.6.32.x kernels but falling back to my previous kernel, 2.6.31.9-rt works just fine.
This is on a production system and is not running in a virtual machine, so the issue is not:
[URL]
I have tried running sudo dpkg-reconfigure console-setup, which does regenerate the initram-fs for the desire kernel, but it does not solve the problem.
The guide's initram hook includes the lines:
Code:
mkdir -p ${DESTDIR}/etc/console-setup
cp /etc/console-setup/boottime.kmap.gz ${DESTDIR}/etc/console
... but my understanding of the initram stages of the boot process are hazy and I am unclear what the intent is behind the lines.
so i just got ubuntu so i updated it then installed the wirless card drivers and nvida card drivers i then had to restart so when it re starts it is not at the log in screen like normal it is like in the terminal and then asks me for the log in name so i type it hit enter and then it asks for password so i type it in hit enter and then it says packages can be updated the updates are security up dates then it wants me to type a command in what do i do
View 3 Replies View RelatedI have a new (for me) computer (Its a Dell Dimension 9200) that I have put my hdd in with its Ubuntu install. The hdd works just fine when booted in my kpc shuttle but does not boot properly in the Dell. I can get a grub menu when I pull the power cord and then reboot. If I select recovery mode, I can get a graphical desktop with the failsafe graphics options or a command line. When I reboot after recovery mode, I do not get a grub menu (even if I press shift during boot) and all I get is a black screen with a blinking cursor. The monitors then go blank and act like they are no longer connected to the computer.
View 9 Replies View RelatedI created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies View RelatedI have installed the updates as it was showing by the update manager.After completion of the installation ,the os asked for the rebooting the system so i have just clicked on it..when i again comes to enter the ubuntu...a terminal type window is coming just after my click on ubuntu.it is something like this---
grub release version 1.97 beta 4
sh:grub>
now what should i enter here so that i can come on the main ubuntu gui window..?
I am installing 11.04 on a test PC. My standard drive layout, developed over many years and many distros is as follows:
sda1 /
sda2 /home
sda3 swap
sda4 /data
/ and /home are relatively small. I put most data files on /data to facilitate hot backup of important data to another drive or machine.
/ and /home are periodically cold backed up with g4l. That said...I noticed that the install partitioner in 11.04 only allows me to select from a list of mount points. / home var etc. I can not type in a mount point of my liking as I have done since I started using Ubuntu about 6.4.Is this Canonical's idea of an improvement?Yes I can manually format the /data partition after install and add it to /etc/fstab. Still I would give Canonical three thumbs down on this enhancement.
p.s. The above seems to be a moot point as the installer refuses to install the boot loader. I have filed a bug report. It makes no difference if I partition the disk manually or allow the installer to partition it to its defaults. If it ain't broke, break it.
I installed Karmic on a newly formatted hd. Xp is on another. When I boot, KK comes with no problem. But, I get and error 13 when I try to access xp. Here is the result of the boot info script.
[Code]....
I've searched and haven't found a solution for this one yet, but here goes. I took a 160GB hard drive and split it into 4 partitions, 1 for Windows XP, 1 for Ubuntu, 1 for swap and 1 for future use (possible Hackintosh installation??).I installed Windows XP first, downloaded all my updates, etc. Then, I installed Ubuntu 9.04 and selected the Ubuntu partition. After installing it, when I reboot the machine, it just boots straight into Windows XP, and it doesn't give me the option to choose which installation I want to use.I wanted GRUB; I know the installation is there because when I boot with the LiveCD, it shows up
View 3 Replies View RelatedI installed karmic on a dell vostro 1000 - all went well until I installed updates and restarted. Ubuntu booted to tty1 instead of tty7. I'm not entirely sure what changed, but I could do one of 2 things. at the login prompt on tty1 I could wait about 2+ minutes and it would boot to tty7 w/o my network card (but keeping the wireless) or I could ctrl+alt+f7 and get to the normal tty7 with everything working.After a bit of looking around, i found a few solutions, but the problems were not exactly like mine.- I could reinstall gdm (I did this and it had no effect)- I could install minigetty and do something else (not to sure what they wanted here)- I could remove usplashIt turned out that removing usplash did the trick...I dont get the cool little white logo over a black screen
View 1 Replies View RelatedPoston my phone, so forgive the formatting. i just ran the ug to 10.04 from karmic and it appeared to run fine (no errors.) system rebooted and i get a "general error mounting filesystems" and then dumped to maintenance mode. root and swap mount successfully, but root is read only. is there any way to fix this short of a reload. i don't have a second pc very handy at the moment.
View 2 Replies View RelatedI installed 64 bit Lucid Lynx last week. There were some issues with the grub boot manager and my windows boot manager. However, about half the time i would boot to reach only a login prompt. If i used CTRL ALT DEL i would then reboot usually into the GUI.So now i only reach a login prompt all the time. How do i get the the GUI to run automatically?
View 4 Replies View RelatedThe problem i have is that after sucessfully installing Ubuntu 10.04 (64bits) when i start my PC and i get to grub2 and select Ubuntu it will get stuck at a blank screen with only an "_" flickering on the top of the screen. At first i thought "Hey, maybe it just takes a while to boot" but after letting it sit there for about 20 minutes and nothing happening i decided to restart my PC. And then the same thing happened like 5 times. BUT on the 6th try it booted sucessfully! And everything was working perfectly but as soon as i restarted my PC i would encounter the same problem.
Details I should probably mention that i had the exact same problen on the install process. I tried with a CD i had burned the image on and it would show me install options (Try and install, install, etc.) But when i selected either one of those i would get the "_" flickering and nothing ever happening. Then i tried it with a DVD thinking that the CD was the issue. Same thing. After that i tried with a USB drive and i would get the same exact problem, but on the retry on the USB drive the planets aligned in such a way that i actually got the Virtual Ubuntu loaded from my USB drive.
So it installed sucessfully and when i restarted it i got to GRUB and selected Linux and the "_" would start showing and nothing ever happens. On the <random number> of restarts it actually launched and it picked up my audio, video cards, other NTFS drives, etc. But when i restarted i would get the problem again. I even went trough the whole install process AGAIN (getting it to read from the USB flash drive, starting on Ubuntu) and still no consistent results. Though on the second install it didn't pick up my audio hardware nor my other NTFS drives until the second restart where i was able to use Ubuntu normally. I even upgraded what it told me to upgrade. (now i have two "different" versions of ubuntu on grub, each with it's own safe mode only different by a .24 and a .25 on their names) and right after upgrading and restarting it booted immediately. But after that i'm getting the same issue over and over again.
[Code]...
I tried to install ubuntu 10.04 on a desktop in dual boot with win XP. Ubuntu doesn't boot. It only happens after a reboot of win XP. I upgraded to 10.10 but nothing changed, i made a clean install but still it happens..I mean:
1. Power on
2. grub -> ubuntu
3. splash screen freezed
otherwise:
1. Power on
2. grub -> WinXP
3. reboot
4. grub -> ubuntu
5. ubuntu run perfectly
