Ubuntu Installation :: Fresh Install Of 8.10 Over 9.10 Causes Grub 'no Such Disk' Error
Jan 27, 2010
I have a dual boot machine (Win XP + Ubuntu 9.10 on separate physical drives) which was working fine. I now want to replace the Ubuntu 9.10 with LinuxMCE which is based on Ubuntu 8.10. Using the LinuxMCE install disk, I did a fresh install of Ubuntu 8.10 over the top of Ubuntu 9.10 (repartitioning the whole drive). On reboot, I now get a Grub "no such disk" error. I have run the boot info script which produced the following RESULT.txt:
Code:
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks for
(UUID=6a59ab9e-041f-41e2-b27c-02b8ada4c1af)/boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdc
I have an odd problem. I custom-built a workstation: MSI Speedster 1 mobo 2x Opteron 2352 4x DDR2 ECC 4GB 3x 150GB WD Raptor, hardware RAID 0 1x 2TB WD Green, standalone
I had Linux Mint 8 installed, but before putting the machine to real use decided to toss Windows 7 on there to see how it worked. Now I am attempting to put Mint 8 back on to get everything set up. There have been no hardware changes since I had Mint installed before.
I can successfully install, but when I reboot I get a Grub error 17. The partition table looks like: 50GB / ext4 400GB /home ext4 ... 2TB /backup /ext3
Grub is installed to (hd0), which is the 450GB hardware RAID. It does not make a difference when I run the installation (and then reboot) with the 2TB drive disconnected. Thinking maybe the new ext4 format was messing with Grub, I tried: 200MB /boot ext2 50GB / ext4 400GB /home ext4 And installed again and rebooted. No dice. I'd guess Grub has issues recognizing the hardware raid, except it worked before
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files: unicode.pf2 and grub.cfg
Company laptop HP Compaq 6710b, NTFS on hd0, Win7 installed. BIOS allows boot from USB drive, so wanted to use Ubuntu with no influence on laptop (no disconnecting internal drive, no dual boot, etc). Performed an install from CD to an USB drive making a JFS partition mounted on / and a swap partition. The installer made the JFS partition bootable (boot flag is set) as I asked. On first boot I got:
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
After buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized. I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
I have a new 500GB disk, with a partition with Windows XP, one with Windows 7, one for Ubuntu 10.04, one for /Home and one for swap. The systems were installed in that order. But after finishing with the Ubuntu installation, removing the CD from the drive and restarting, GRUB never showed up, and the system went straight to the Windows OS selector; the one prompting to start Windows 7 or an "Earlier version of Windows". So I can't get to Ubuntu, even though it seems it installed just fine.
As a note: just after the installation process ends and it shows the "remove CD" message, it spilled out a list of I/O errors in some sr0 device or something. But I just installed the same Ubuntu on a friend's computer and it showed a similar error list, yet his system works just fine... However, he doesn't have Windows 7, thus no OS selection screen other than GRUB. I didn't want to rush into editing the MBR or re-installing GRUB before I knew I had to do that.
I did a fresh install of Lucid Lynx, and now when I start up it shows a blinking cursor for a second or so and then my monitor shows an "Input signal out of range" error. The same thing has happened before, and I was able to fix it by editing the boot options in grub to include 'nomodeset'. However, this time the usual grub loading screen where I would normally press esc to edit the boot options doesn't appear. (Spamming esc doesn't seem to work either.) If it matters (which I have an odd feeling that it does) I partitioned the hard drive into an ext4 partition that mounts at / , a swap partition, and another ext4 partition that mounts at /home . I attached a screenshot of what GParted says about it.
My setup: a work laptop that has a corporate Win7 image, and to which I have added a few partitions to try various linux distributions. The MBR is governed by Lilo from the Slackware 13.37 installation in /dev/sda5. The MBR boots no kernel image directly, it only chainloads the boot sectors of partitions /dev/sda1, /dev/sda5, /dev/sda6 and /dev/sda7. The latter three are formatted ext4.The Win7 boot mechanism traditionally resides in /dev/sda1, and the linux distros are required to install their boot machines into their respective partitions.
What I am trying to say is, I installed Ubuntu 11.04 into /dev/sda7, and told the grub installer the same thing: install yourself into the boot sector of /dev/sda7. Kudos btw for the Ubuntu installer, it comes across as a very professional piece of software.
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System: Barton 3200+ with 1GB of DDR1 Asus A7V333 High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
Bit new to linux but what i saw with gloria in my opinion was a better os than windows. Just done a fresh install with helena on my sata drive and a dual boot with xp pro which is on my on my ide drive my problem is on boot I get to grub loading then boot hangs for 5 minutes before the dual boot screen appears and when it does I can not move up or down to select any options eventually however helena does start.
I had ubu 904 and vista installed on an 80gb drive, i had a spare 80gb drive also. I setup a raid0 config in my bios, then installed ubu9.10 onto it. All was fine until the very end, and then it said grub failed to install.
So i rebooted, and im left with a blinking cursor. How do i install grub? Ive installed ubu a few times now and never had an issue so now im lost.
Followed steps 2-5 and purged/reinstalled grub now it boots as it should, NO idea where it was messed up.[URL].. I had 9.10 running in raid1 and upgraded my hardware (cpu, mb, memory etc) and wanted to do a fresh install of 10.04 to get updated. After following the various guides online such as [URL]...It begins to load grub and drops to a "grub> " shell. Which I have to do the following to get it to boot.
Code: set root=(md1) linux /vmlinuz root=/dev/md1 ro initrd /initrd.img boot
Then it boots up normally and I can use it like any other desktop. I've been over my grub.cfg and /etc/defaut/grub files and cannot find the issue. At this point I'm wondering if the fact it's a raid1 setup is keeping grub from finding it's files.
I have a VIA Epia M 5000 system with 2 western digital 1TB NAS SATA drives connected through SATA<->IDE adapter. Everything installs and writes as expected except... grub. It never boots, after a message 'Grub loading' I always get 'error: no such disk'. I've tried numerous times and has been attemping to fix the issue for the past 2 days.
/dev/sda 0.999TB 0xfd linux raid autodetect partition 1GB 0xfd linux raid autodetect, logical partition
/dev/sdb exactly the same 0.999TB 0xfd linux raid autodetect partition 1GB 0xfd linux raid autodetect
/dev/md0 RAID1 of /dev/sda1 and /dev/sdb1 marked as ext4, boot point /
/dev/md1 RAID1 of /dev/sda5 and /dev/sdb5 marked as swap
update-grub2 in rescue mode generates grub.cfg with SET root=/mduuid/UUID_OF_SDA1 then after that there's search --no-floppy etc --set root=/mduuid/UUID_OF_MD0
I'm writing this from memory but simply the two uuids are different. Is this correct? I get those UUIDs to compare from blkid. All partitions are marked as bootable. grub-install /dev/sda and grub-install /dev/sdb produces no errors. grub-install /dev/md0 does not work, complains about superblocks or something similar.
Grub.cfg file contains insmod raid mdraid1x and similar lines, so that should be ok. Grub drops to rescue mode with message error: no such disk. Not device, but disk. Google finds many results for 'no such device' error, but I am not getting that error. 'ls' produces (hd0) (hd0,msdos1) (hd1) (hd1,msdos1) ls ANY_VALID_PATH produces empty newline being printed, nothing more.
setting prefixes manually does not work, with error message 'error: file not found'. ls (hd0,msdos1)/boot/grub also produces empty line being printed. Rescue CD and auto-assemble of md0 and md1 works, the files are there, everything okay, except grub.
I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:
Code:
This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.
I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.
Firstly, I'm ubuntu-naive so things may need to be explained painfully slowly. Secondly, I tried doing a search for similar problems but I had a hard time following the solutions so rather than just jump on another thread I figure i'd start a new one.I am trying to move on from XP and tried setting up 9.10. I did the LiveCD; followed the installtion prompts and installed, and restarted. Following restart I get the following;GRUB loading.error: no such diskgrub rescue>I've tried doing the boot info script lines but I keep getting "unknown command sudo" msgs.I can't get beyond this point.
Trying to do a new install of ubuntu 10.10 to my laptop. Installation and all works fine, but upon rebooting, after the bios screen i get:
Code: error: out of disk. grub rescue> I tried using following some instructions i found after googling for the problem: Code: ls (displays the partitions and devices Grub can see) set prefix=(hdX,Y)/boot/grub
[Code]...
but after the 5th step, i get another "error: out of disk" message. The odd thing is that I had an install of 10.10 on this laptop a month ago, and it worked fine. As a side note, I installed fedora 14 after this happened, which worked fine. Reinstalled ubuntu, and it was back to the same problem. I also tried installing with a kubuntu cd I had, to make sure it wasnt the install media, and had the same problem.
Every time I start my computer, I get a message saying:
I press any key, and the start-up completes without further problems. The first line on the screen after I press any key is
I`ve looked on the web, and grub stage 1.5 seems to be where the size of the hard drive is identified. Problems often seem to be linked to partitioning. My hard drive has (since new) a 115GB and a 5GB partition.
When I try to access the 5GB partition, I get the following error message:
I'm trying to install 10.10 64bit on a DFI X48 mainboard with 8Gb RAM, I've tried installing from the Desktop CD, Alternate CD and USB stick, but all attempts fail with uncompression error
-- System halted
I've run memtest86 and the RAM passes OK, I've even tried running the install with just 4Gb RAM but without any luck. I've even tried three different CD/DVD drives.10.04 64bit runs from the Live CD without any problems, but 10.10 isn't playing ball...
Plan to use GRUB for multiple booting to select the OS but only with luck have I got it partially to work. Windows 98 and Puppy 431 O.K on first HDD but Puppy 421 on second HDD /dev/sdb1 stops at error 21.
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
I am a novice in Linux but due to my academic requirement I had to install Linux (Fedora 8). I have 2 hard disk's (80GB & 20GB), on the first HD which is 80GB I have Windows XP and the other one I partitioned and installed Linux. Now the first problem is that, whenever I start my PC I get a error which says "GRUB hard disk error", however when I restart the machine it's fine and gives me the boot options.
Secondly, the HD containing windows was affected by virus so I had to format & reinstall XP. Strangely after that I am not getting any boot options and it's like windows is the only 1 OS running. But on windows the partition on which Linux is installed in intact. So I assume something is deleted maybe the Linux boot file.
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
Background: My mother's HP laptop had Ubuntu and Vista on it, Ubuntu my brother's doing. He decided he wanted to take off Ubuntu yesterday (he had forgotten the password), and deleted the partition that it was contained within. The computer now boots to this error.
Inventory: We no longer have the install disk for Windows Vista, he cannot tell me what version he used of Ubuntu, what partition it was on, any of the specs for the machine, or generally any information about the system. All I am aware of is that error on the boot-up screen. I have nothing else to work with.
I would like to remove Grub, and Ubuntu, and leave Windows intact (the request of the owner of the computer), but I have no idea what commands I could use to get rid of either when I can't access Windows, or how to properly remove them if I did access Windows.
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
I have an old HP PC with 2 drives: Primary (C = 20GB) and a slave (E = 60GB). I have Windows XP Pro OS (which I want to completely replace with Ubuntu). Ubuntu 10.10 is installed on E as a side-by-side (with XP on C). I am done testing Ubuntu and now want to completely replace the XP OS.Ubuntu is installed on E-drive as a partition. ISSUE: When I log on the PC goes directly to the GRUB menu but I get no option to boot from the Live Disk 10.10 during the boot-up.
HISTORY: I have tried (unsuccessfully) to remove Ubuntu from my E-drive by use of the uninstall function from Windows control panel. I have also tried to remove it using the manage/Disk Management process but the "Format" and "Delete" options are unavailable (grayed out) so cannot use that. I would like to do a complete clean up and fresh install of Ubuntu as my only OS.I have read and tried a number of internet articles / recommendations about opening BIOS and redirecting the start-up to the disk, but I do not get any option or any time during the boot to do that.
QUESTIONS: 1) How can I get my HP PC to boot from (recognize) the Ubuntu Live Disk (CD)?
2) Would a complete removal and clean reinstallation be a better approach?
3) And how can I remove Ubuntu from the partition on E (as I want to dedicate the C-drive exclusively for Ubuntu)?
This is my first post so please be patient. I am unfamiliar with this part of the installation process.
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
