Ubuntu Installation :: How To Find/install Kernel 2.6.32-10
Jan 17, 2010
I have a MythBuntu system running 9.10 and as many others I am having issues with my wireless card controlled by ndiswrapper (networks are detected but it is unable to obtain an IP address most of the time, once in a while it connects, it also has the "invalid cmd 12" issue which fix is described here).
So I found this thread here (see post #30 on the bottom) and I'd like try upgrading the kernel to a version which Synaptics apparently doesn't offer. So my question is basically threefold. Where do I find/download the kernel (is there a way to use apt get ...) What method do I use to install it (I've found several directions on how to compile it, if someone could point to the most complete ones, I would appreciate it. If for some reason something goes wrong and I need to downgrade again, how do I do that (Synaptics?).BTW, I can hook it up to the network through ethernet and ssh into it from my Mac Mini to work on it.
basically put a new hard drive in my old computer and wanted to install fedora on it, downloaded fedora 12 dvd iso (3ish gb in size) have burnt it to a dvd disc, turned my laptop on and set it to boot from cd drive, restarted it, it reads the disc and displays the following message:
ISOLINUX 3.75 209-04-16 ETCD Copyright (C) 1994-2009 H.Peter Anvin et al Could not find kernel image: Linux boot:_
The uderscore is flashing and i can type stuff in but have no idea what to type in to find the kernel image, or why it cant find the kernel image.
Search the forums first. Well I did, can't find anything I understand. So please help an ignoramus in simple terms. The problem:- I'm trying to run vmware workstation and I get a desktop box pop up which says "Kernel .heade4s for version 2.6.37.1-1.2 desktop not found" How do I find them and install please.
My laptop threw a wobbly recently (same time as kernel update?) I have got it to find the old kernel, but it still won't boot.It's a 11.3 install, dual-booted with XP. The /boot partition is in the root partition - sda7. Why is it trying to mount sda7 as swap? (not in fstab like that)
In order to not post into the wrong forum, I am wondering if an issue related to performing a PXE based NFS install can be posted here, or does it belong in the networking forum? Seems that I've seen both, and I've done several searches using parameters/error messages that I'm seeing and can't seem to find a post that relates.
I have results of "./getinfo.sh network", and other necessary config file info ready to post, but want to make certain on correct forum.
After installation of Ubuntu 10.10, grub loads and has the right menu list. However, Ubuntu doesn't load and I get an error message of :Gave up waiting for root device. (with a list of common problems)There is also:ALERT! /dev/disk/by-uuid/1584598e-b8e5..... does not exist.
I'm using an acer aspire one netbook and attempting to install ubuntu 11.04 on it using flash drive. I extracted the installer using the universal usb installer. Anyway as soon as I get to the ubuntu installer screen it won't let the installer begin and says this: "could not find kernel img:/casper/vmlinuz. I have tried many things including typing in this:"vmlinuz initrd.img" and extracting the data to the flash drive again but nothing has worked.
I am trying to install a piece of software that uses an install.pl script which looks to /usr/src/linux/include/ for my kernel headers...but it never finds them or that directory/link.
I've run "yum install kernel-devel kernel-headers" so I am pretty sure they are installed.
I've been trying to get a live stick of OpenSUSE 11.2 running and I continuously get a script of "boot: could not find kernel image: gfxboot" running down the screen. Any other version of Linux will run fine off this same USB and I have not seen this error cited anywhere on these forums or Google.
I seem to have determined a few other things about my "only gets as far as a GRUB command line" problem:To recap, sda3 (GRUB hd0,2) is the main Linux partition; sda9 (GRUB hd0,8) is the boot partition.GRUB is 0.92.Installation was from an 8.04LTS live CD (at least, that's what the envelope says it is)/"/boot/grub" (i.e., "/grub" on sd9/hd0,8) contains a "menu.lst" file. I modified it (had to do a "sudo gedit" from a command line!) to (1) comment out the line that hides the boot menu, (2) change the timeout from 3 seconds to 90, and (3) add a menu line based on my succesful manual IPL of DOS.
It still boots to a GRUB command line. If I do a "configfile /grub/menu.lst," a boot menu comes up. DOS will successfully IPL, but Linux still gets a "no setup signature found," (ditto for "recovery mode"), which suggests either a bad kernel, or a kernel that's too big for the GRUB to handle.Why would it be finding its way to grub, but not finding the boot menu file?Why would the live CD come up just fine, yet the GRUB and kernel it installs fail?
I'm looking for the .config file for the kernel which ubuntu uses to compile the standard generic kernel which is delivered in compiled form. I downloaded the following kernel archive ( 2.6.31.8 ): [URL]... I need the original file, because I'm not able to configure a working kernel, so I want to try to compile the kernel with the standard configuration. Afterwards I'm going to change some options.
So after getting around the Fakeraid bug, and the grub bug, and all the other bugs killing my system fixed and then i moved on to install my video driver. There was nothing in Administration>Hardware Drivers, so i downloaded the latest driver for my two 8600m gt cards. Did the whole ctrl+alt+f2 and then stopping xserver and then running the driver install only to run into yet another damn bug(see log below)
I have tried fixing it by doing what other threads have said to do e.g:[URL] still nothing. Below is the Nvidia log.
I've upgraded kernel 2.6.27.48-0.2-default to 2.6.27.54-0.1.1 on openSUSE 11.1. Before I tried to upgrade to 2.6.27.48-0.3-default where I encountered the same issue. After reboot it can not find the modules for 2.6.27.48-0.2-default which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.
Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the 2.6.27.48-0.2-default kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.
I am currently running Fedora 10 XFCE on an Acer Aspire 1 (1.6ghz atom, 1.5gb ram, 8gb ssd). I am trying to install Fedora-11-i686-Live-XFCE via USB stick (Kingston 4gb) and am having no luck. I downloaded the .iso via bittorrent. If I use liveusb-creator: .iso passes checksum, installs boot image, installs syslinux, claims it's complete. When I try to boot, or simulate booting with qemu, I get the message "Could not find kernel image: linux" If I use
it says that the .iso passes checksum, installs live image, updates boot config file, and setup USB stick as a live image. Once again though, when I try to boot, or simulate booting with qemu, I get the same message "Could not find kernel image: linux"
I'm new to fedora and when I boot from a cd I get the message: could not find kernel image. I currently have windows xp and my motherboard is and ix38 quad gt if that helps.
i want to compile the vanilla kernel 2.6.37-rc3, but i want to obtain a .rpm file. I found this guide long time ago (i used it many times) but it use src.rpm package and the contained kernel.spec file have many lines for adding patches. Someone know where can i download a kernel.spec for vanilla kernel or a guide to obtain an rpm file
after update to kernel-2.6.18-164.el5 one of the 2 NIC's of my machine are only found at 1 of 4 reboots. Using the old one kernel-2.6.18-128.7.1.el5 all is fine. This are the to NIC's:
I'm not able to boot the Ubuntu 9.10 OS in my HP Laptop..after the installation it was working perfectly for 2 days and today I updated this "linux general image" file and when I restarted my Laptop ..i got this on my screen..
GNU GRUB version 1.97~Beta4 [Minimal BASH-Like line editing is supported. For the first word. TAB lists possible command completions. Anywhere else TAB lists possible device/file operations.]
I have installed the fedora 14, but there is no kernel source tree.I read the doc "building a custom kernel".But I don't want to rebuild a new kernel.I just want to install the source tree of current kernel.Could someone tell me the way?
I have a problem installing the oporating system, from a USB. I keep getting the error: Could not find Kernel: GFXboot. I have used a USB loader to put the ISO file on the flash drive as well as extracting the file using winrar. (separate occations) I have also tried both LIVE CD as well as the full DVD.
Going from Fedora 12 to 13. Got to the point where I have to reboot to install, system reboots to 12. This is a triple boot system with Open Suse and Mint, and the grub2 bootloader from Mint is the bootloader for the whole shebang. In the "how to use preupgrade" instructions there's a line that says "dentify the drive and partition of your Fedora /boot folder." How? If that sounds odd, consider that in my set up "computer" shows 4 partitions (and with just three operating systems..?). I can mount them, but have a problem telling which sytem is Fedora, Suse or Mint. And getting the FEDORA bootloader to find the PREUPGRADE kernel ... Momma said there'd be days like this.
cat /etc/fstab just returned /dev/sda1 on /boot. I installed Fedora first, before Suse or Mint, so being on the first drive or partition sounds right, but the multiple drives throws me, and "just guessing" doesn't seem like the way to go.
Ive also tried downloading RPMs to a usb stick and it said it was the wrong ones for my machine.
How do i find out if my machine is x32 x64 x86?
Anyway im trying to install kernel headers and devel from the fedora installation disk but i dont know how to get to the cdrom thru terminal as i cant copy the RPMs to desktop by drag n drop or using software installer.
I dont have an internet connection to the pc so i cant use yum (which would make things so much easier) so can anyone tell me how how to install these packages thru terminal?
I am installing Ubuntu 10.10 server on my HP proliant microserver using the USB flash drive option. the install goes great until the time when it copies files for the setup (after the keyboard setup) and the error message comesw up (can't read CD rom drive)?I have used serveral flash drives and used universal usb installer several times. however the installatioon alwasy gets stuck there.
I want to install package kernel-image-2.4.27-2-686-smp, but when i use terminal to install , write sudo apt-get install kernel-image-2.4.27-2-686-smp but couldn't find this package. In my synaptic i can't find this package to install. I downloaded from [URL] this package kernel-image-2.4.27-2-686-smp_2.4.27-12_i386.deb ,when i install , to appear error: "dependency is not satisfiable: initrd-tools", i downloaded this package initrd-tools and install but appear this error:"dependency libdevmapper1.02", in my synaptic i saw this package libdevmapper1.02 already installed.how to install package kernel-image-2.4.27-2-686-smp from terminal or from synaptic.?
When I load the live CD into my computer, the DVD drive spins very fast and then drops down to command lines with a kernel Panic. I have tried with the Final Release and with the Release Candidate. Because of this I cant even load up to the live CD enviroment.
It also mentions the name of my mother board in the code, the motherboard is a gigabyte G41M-ES2L and is brand new.
Could someone give some advice or help? Currently I dont have ubuntu installed on this computer as I went for a fresh install with vista.
