Ubuntu Installation :: How To Properly Install NVidia Drivers On 10.04
Oct 8, 2010
Being a total beginner to linux, I can't seem to find a decent guide on how to install these drivers without much hassle, even though I've been searching for almost couple of hours now.
First, my system specs, taken with Hard Info
Processor: 2x AMD Athlon(tm) II X2 240 Processor
Memory: 3091MB (1865MB used)
Operating System: Ubuntu 10.04.1 LTS
-Display-
Resolution: 1360x768 pixels
OpenGL Renderer: GeForce GT 220/PCI/SSE2
X11 Vendor: The X.Org Foundation
Now, I've installed the "default" (dunno if that would be the correct categorizing) driver with the "Hardware drivers" utility from System->Preferences->Hardware drivers because I've failed numerous times trying to install the package from nVidia site ; I would always get an error while trying to run the package :
"It seems that X server is running on your linux, please deactivate it to install this package" or something like that, but I'm sure it was about X running.
Well at the moment i have just installed Debian 5. I've downloaded nvidia-linux-x86-180.29-pkg1.run and i need someone to help me out step by step on how to install this properly.
I am currently running Ubuntu 9.10 on a Compaq Presario V3010US. My video card is an NVIDIA GeForce Go 6150 which appears to be running properly with some limitations (missing effects from CompizConfig). While utilizing the "Hardware Drivers" configuration a recommended driver is listed but when I attempt to activate this driver I encounter an error.
This error turns my attention to the log file :
This log file is extensive and I do not wish to post pages of code unless requested. The configuration does however list that "a different driver is in use". I have scoured threads to ensure that I have not posted a question that has been answered to no avail. Please bear in mind that I am in my Linux infancy and my grasp of this incredible operating system is cursory at best.
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
I seem to have an issue with my nvidia drivers again.I get them working, then the next lot of updates to fedora seems to revert any progress I've made.Currently I can't run any 3d accelerated applications, no wine, no games etc, I have followed the documentation, installed the driver, added the blackist to noveau into boot.conf, and restarted
NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.
I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.
It's fairly easy, anyone can do this. Read and follow these instructions:
Install all updates. Although it seems unimportant, it really is.
Go to [url] and follow the instructions to install the free and nonfree repositories
Go to System > Administration > Add/Remove Software
Search the following: nv
Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.
Install the drivers by clicking "Apply" at the bottom of your screen.
After installing, go to Applications > System Tools > nVidia Display Settings
Set the properties of your video card, such as TwinView or higher screen resolutions.
After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!
Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.
Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.
Now type:
Code:
Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.
Exit out of the terminal.
Exit out of the nVidia Display Settings application. Do not save anything from this application.
Log out and log back in to see the changes.
If you want to change some settings, repeat steps 7 - 16.
I'm trying to install the current drivers (from the Hardware Drivers tool) but it fails, refering me to jockey.log, which contains this:
Code: 2010-05-23 16:19:46,978 DEBUG: nvidia_current is not the alternative in use 2010-05-23 16:19:47,106 DEBUG: nvidia_current is not the alternative in use
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
After installation of 11.3 I had intermittent hangs and blurred icons.
"My Computer" told me I had a Nvidia GeForce 9100 and a driver called "gallium". That was the problem.
I added "ftp://download.nvidia.com/opensuse/11.3" to my repository and found a new driver to install. That solved my problems. Now my systems are rock solid.
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
I have wild idea to build a new Ubuntu computer from scratch. This is a great motherboard with lots of features, planning to have a RAID, and an AMD 64 bit processor(s). I want to be sure that I am installing the correct drivers..can anyone point me to a 'guide' to building a computer such as this?
So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
I have a desktop installation of Ubuntu 8.10 which has somehow lost parts of it's nvidia drivers. Is there some way, short of reinstalling Ubuntu, that I can completely remove the dregs of my nvidia installation, and then re-install it all afresh ?
teh current version according to Hardware Drivers is 195.36.24 the current one on nvidia's site is 256.53 if there is a way to sue the package manager to get it that would be preferable I know how to install their run files they have
I did alot of reading on installing nVIDIA Drivers So far, I did it through the Package Manager. But I got the older 260.* drivers. I downloaded the main drivers from nVIDIA Page. Ran the RUN file. I'm running an Giada PC with ION 9400 IGP. What do you people recommend the best way to install? Custom build? Which I don't know how to. I tried to get vdapu installed as well. But I still get Undefined Rendering in Flash Player. And Boxee plays videos cropped on the left hand side. Right now I have 270.40.16 drivers installed.
Just installed Ubuntu 10.04 on my desktop, inserted a nVIDIA cd in order to install the nVIDIA control panel plus drivers, a CD icon appears on the screen but nothing happens, I have right-clicked the icon and selected open but it show me just a folder with 'bin', autorun.exe' etc. and the cd wont start. Same for other cds.
i am totally new to linux and ubuntu (10.10 is the first release i have used) I have successfully managed to create a persistent ubuntu 10.10 bootable usb drive. I really want to enable the advanced 3d effects that ubuntu offers but I'm having trouble installing the drivers for my geforce 6600LE on the persistent usb.
I attempted an install from the Appearance window, the package failed to install after downloading. So i used the following commands someone posted:
I just installed 11.04 and I knew I would have to install the NVidia video drivers. So it was no surprise when it popped up a warning and dropped me into Gnome Classic view. So I turned on the NVidia drivers and rebooted. In my desktop selection menu on the login screen I have "Ubuntu" and "Ubuntu Classic".
Unfortunately they look exactly alike, with the Gnome panel along the top, and the panel with the taskbar, desktops and recylce bin on the bottom. I've gone back-and-forth a few times and nothing has changed. Some changes in one environment is not set in the other, like they really are 2 different environments.
According to the Software Center, Unity (not Unity 2D) *is* installed.So how can I boot into the Unity desktop?
I am trying out Debian 6 and was wondering how I install the Nvidia drivers. In Ubuntu, I just had to launch Hardware Drivers and install the drivers from there. Is Debian a harder distro to use than Ubuntu? Like I said, I am trying it out. I have a tendency to explore the different Linux distros hopefully finding one that is drop dead easy to use and maintain.
When I go to System>Administration>Hardware Drivers a new window pops up (no proprietary drivers are in use for this system). I click on version 177 and activate, but all that happens is a smaller window comes up (downloading and installing driver) although it never goes over 0% and then quickly disappears without any "changes applied" message.
Anytime i reboot or shutdown linux i get an error saying it cant find my drivers or somthing before x starts... i tell it to shutdown to terminal rerun drivers and everything works untill i reboot again <.< for now i just been keeping my computer on but i would rather figure this out... i have searched high and low and finnaly have given up trying to get it to work with just using google research...
I have got to install nvidia 260.19.12 drivers in ubuntu 10.10 64 bit. I have got a GTX 460, so I think these are the right drivers [URl]..The question is: how do I download and install 260.19.12 drivers? I would need a step by step guide, because I'm not familiar at all with Ubuntu, so it can be difficult for me, even if I will try my best.
I installed Debian 8 on my new computer 3 days ago. Everything went fine, until I tried to install the nvidia non free drivers version 352.21 (for a GTX 970M).I read a lot about that, figuring out I had to add the experimental repo. Here's my sources.list for reference :
Code: Select all# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie contrib main
# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie main contrib deb http://ftp.fr.debian.org/debian/ jessie main non-free contrib deb-src http://ftp.fr.debian.org/debian/ jessie main non-free contrib
[code]....
E: Unable to correct problems, you have held broken packages."but it is not going to be installed" ?I searched on various search engine for this issue with no revelant result..
when i try to install the nvidia drivers with 'yum install kmod-nvidia' its worked before, but now i get this (look at the bottom for where it goes wrong)
[root@localhost Tom]# yum install kmod-nvidia Loaded plugins: langpacks, presto, refresh-packagekit Adding en_US to language list Setting up Install Process Resolving Dependencies
So I kind of had ubuntu working, but then I tried updating to the newer nvidia drivers and I broke it. I had to uninstall/purge nvidia so as to get ubuntu past the black screen/no signal to monitor...
I had been using a "Broadcom B43 wireless driver" which used fwcutter to extract firmware from various source files. I have never been able to get this install working with nvidia drivers and am about ready to try anything (including yet another reinstall).
**Nvidia drivers 96, 173, & current cause my system to freeze, lock up, reboot, fail to boot, etc. You name it and it's happened.**
I tried using synaptic, jockey and the terminal to install nvidia drivers. Then I tried adding the swat ppa and installing through System-Admin-Hardware Drivers to no avail.
Every time I start my PC it displays this window.
And when I open Hardware drivers this is what appears.
