I seem to have an issue with my nvidia drivers again.I get them working, then the next lot of updates to fedora seems to revert any progress I've made.Currently I can't run any 3d accelerated applications, no wine, no games etc, I have followed the documentation, installed the driver, added the blackist to noveau into boot.conf, and restarted
Code:
[james@nevada ~]$ uname -r
2.6.31.12-174.2.3.fc12.x86_64
[code]...
Quote:
NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.
I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.
It's fairly easy, anyone can do this. Read and follow these instructions:
Install all updates. Although it seems unimportant, it really is.
Go to [url] and follow the instructions to install the free and nonfree repositories
Go to System > Administration > Add/Remove Software
Search the following: nv
Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.
Install the drivers by clicking "Apply" at the bottom of your screen.
After installing, go to Applications > System Tools > nVidia Display Settings
Set the properties of your video card, such as TwinView or higher screen resolutions.
After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!
Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.
Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.
Now type:
Code:
Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.
Exit out of the terminal.
Exit out of the nVidia Display Settings application. Do not save anything from this application.
Log out and log back in to see the changes.
If you want to change some settings, repeat steps 7 - 16.
This is my first post, as I've finally become fed up with trying to get the nvidia drivers installed on Fedora 10. I've read through all the posts here about how people have had problems. I know about the rpmfusion repository, and have followed leigh123's instructions to the letter at this link:[URL]The exact stepsI have taken before following his sage advice follows this way: install off the CD image I burned of Fedora 10, run from the menus "System-->Administration-->Update System" to get the system up to date, reboot to make sure everything is working fine.
Then I follow the above instructions (only because they have gotten me the closest to getting the drivers working). After the reboot from following those instructions, the system starts up, and I have a desktop. But when I restart again, either because I'm shutting down for the night, or just to check again that everything is fine,I get nothing but a flashing cursor in the upper left of my screen. I'm able to CTRL+ALT+F2 and get to a login that way, but can't get into the GUI. I've searched the forums (both here and on The Web generally), and can't find a fix for this that works for me. I have gone back and erased the partition and reinstalled, so I'm at the basic install with all the updates for my system, and needing help with getting the drivers installed and working.
Just to give a run down of what I have on my system:Two NVidia 8500 GT cards connected with the SLI bridgeAMD Athlon 64 X2 Dual Core 3800+Runningl 2.6.27.12-170.2.5.fc10.x86_64 (I'm typing this up as I reinstall updates as I listed above).Before anyone starts giving suggestions, please make sure to give the full instructions, as I'm new to Fedora/Linux. And if there is anything else you wish to know about my configuration
Today I finally could install Fedora 15 i686 in my now aging (2005) desktop computer (although I will always think of it as my "new machine", as long as I don't assemble a new one for me):
AMD Sempron 3100+ (1.8GHz)
1GB DDR400
120GB HDD
NVIDIA GeForce FX5200 (128MB)
After I installed F15 my initialpression was that it worked really good on that hardware: everything went fine with GNOME 3 for example,except for some lags in graphics rendering, which I thought would be solved after the graphics card's full power were unleashed with the proprietary NVIDIA driver.For starters I am not sure which Nvidia driver is right for my card (Nvidia 173.X or the regularvidia).I managed to get "working" the 173.X driver but the desktop is even less responsive to begin with, and there appears to be a lot of activity on the hard disk side.So, my question is, which could be causing the performance loss?
A. The "small" RAM.
B. The vintage graphics card.
C. Some problem in the hard drive.
D. A known bug.
Sometimes, in Firefox, after looking a video and closing the corresponding tab, a still picture of the video appears in other tabs, even in some other applications than Firefox (e.g. Terminal). I've installed the nvidia drivers on Fedora 14. They seem to work properly.
View 1 Replies View Relatedopensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies View RelatedWell at the moment i have just installed Debian 5. I've downloaded nvidia-linux-x86-180.29-pkg1.run and i need someone to help me out step by step on how to install this properly.
View 4 Replies View RelatedBeing a total beginner to linux, I can't seem to find a decent guide on how to install these drivers without much hassle, even though I've been searching for almost couple of hours now.
First, my system specs, taken with Hard Info
Processor: 2x AMD Athlon(tm) II X2 240 Processor
Memory: 3091MB (1865MB used)
Operating System: Ubuntu 10.04.1 LTS
-Display-
Resolution: 1360x768 pixels
OpenGL Renderer: GeForce GT 220/PCI/SSE2
X11 Vendor: The X.Org Foundation
-Multimedia-
Audio Adapter: HDA-Intel - HDA NVidia
Audio Adapter: HDA-Intel - HDA NVidia
-SCSI Disks-
HL-DT-ST DVDRAM GH22NS50
Now, I've installed the "default" (dunno if that would be the correct categorizing) driver with the "Hardware drivers" utility from System->Preferences->Hardware drivers because I've failed numerous times trying to install the package from nVidia site ; I would always get an error while trying to run the package :
"It seems that X server is running on your linux, please deactivate it to install this package" or something like that, but I'm sure it was about X running.
I am currently running Ubuntu 9.10 on a Compaq Presario V3010US. My video card is an NVIDIA GeForce Go 6150 which appears to be running properly with some limitations (missing effects from CompizConfig). While utilizing the "Hardware Drivers" configuration a recommended driver is listed but when I attempt to activate this driver I encounter an error.
This error turns my attention to the log file :
This log file is extensive and I do not wish to post pages of code unless requested. The configuration does however list that "a different driver is in use". I have scoured threads to ensure that I have not posted a question that has been answered to no avail. Please bear in mind that I am in my Linux infancy and my grasp of this incredible operating system is cursory at best.
When i was on the live cd installing ubuntu it said i could install my driver but now that i am running off the hard drive it doesn't pick it up under "Hardware Drivers"
View 3 Replies View RelatedI'm installing 10.4 fresh but I can't get the Nvidia drivers installed. I'm using a 9400 GT. Ubuntu installs normally but when I try to enable to the proprietary driver, I get an error on reboot "Failed to initialize NVIDIA graphics device" and have to restart X. Any suggestions on how to get this working?
View 9 Replies View RelatedI've just installed the brand new Ubuntu 11.04 and all goes well until...I log in a session. There is a window telling me that my graphic card isn't too good to run Unity, when I have no problem under 10.10 to run all the eye-candy. Now I have a NVIDIA Quadro NVS 120M with 512 megs of memory. I've install the NVIDIA current driver in the Additional Drivers application and reboot. But nothing...in the additional driver app it says that the current driver is installed but not currently in use...what should I do before giving up and install unity-2d?
View 2 Replies View RelatedI want to run both World of Warcraft and Steam under wine, but WoW won't work with the latest 195.x.x driver, and steam won't work with the previous 185.x.x driver.
Is it possible to have both installed, and to switch between them as needed for different applications? Or will I really have to choose between one or the other?
i have just installed opensuse 11.3 on my PC and updated all packages and all and then i installed nvidia drivers from this link SDB:NVIDIA drivers - openSUSE i downloaded the 1 click install file nvidia.ymp and installed the driver successfullybut then when i rebooted the PC for the driver to work,it doesn't work,and when i go to system>look and feel>desktop effects and i try to enable the effects i get the message that i cant enable the effects it gives me this message "Desktop effects are not supported on your hardware / configuration. Would you like to activate them anyway?" PS i say "no" to this message and it closes but i notice there is a constant use of 33% of the CPU and theres an unnamed/unknown process in the system monitor that keeps appearing and disappearing...thats quitrd because i installed opensuse 11.2 and 11.3 before and i never had these problems
View 3 Replies View Relatedi have a viewsonic VA712b monitor that used to get 1280x1024 resolution on my dell optiplex gx260 that had the intel video card.i upgraded my motherboard cpu and memory..the nvidia 6100 that is onboard seems like it would be an improvement to my old onboard intel but the best resolution i can get is 1024x768
i installed the nvidia 185 drivers and it's not recognizing my monitor as a flat panel lcd but as a crt, also it won't set the correct refreshrate - either 60 or 75.. it's set at 50... since xorg 7.4 no longer uses a xorg.conf file.. i'm not sure how to go about manually adjusting the settings to ones that will actually work. i mean other than buying a separate graphics car (URL)
After installing ubuntu 64 bit, I installed all my updates and installed the current nvidia driver for my 9800 GTX+ from the additional drivers page. After restarting my computer, ubuntu boots into text mode. I used google and found out a couple of commands like:
After i hit control+alt+f7 it hangs on checking battery state with NO ok to the right of it. after running sudo apt-get --purge remove nvidia -current and restarting the computer, the boot hangs on the ubuntu screen everytime.
My specs are:
Core i7 860
4 GB of ram
Nvidia 9800 GTX+
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
I've tried to install nvidia drivers using this commands:
Quote:
yum install kmod-nvidia
yum install akmod-nvidia
yum install nvidia-xconfig
After rdblacklist=nouveau in grub it runs, but I am having several issues and therefore I would like to downgrade to nouveau or whatever I had running with basic fedora 12 installation.
My GPU is nvidia gtx 280:
Quote:
[root@localhost ~]# /sbin/lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280] (rev a1)
My kernel is:
2.6.32.9-70.fc12.i686
I Have just formatted to Fedora 14 64bit and installed kmod-nvidia akmod-nvidia and am experiencing visual lag. The lag did not occur before I installed the drivers, neither did it occur on Fedora 13 with drivers installed.
I have a priitty high spec pc with the nvidia 260 gtx.
just remove xorg-x11-drv-nvidia-libs-260.19.12-3.fc14.i686
so now:
I have 3 monitors and two video cards. In my ATI HD 6750 I have the DVI going to monitor one and the VGA for that card going to monitor 2.
[burnyd@dynamips ~]$ lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350]
03:00.0 VGA compatible controller: nVidia Corporation GT218 [ION] (rev a2)
The second card (Nvidia GT218) I have the DVI connection going to monitor three Monitor one and two for the ATI work perfect but I cannot get monitor three which is connected to the nvidia gt218 to work properly. I tried editing my own xorg.conf file but that did not work, I have a windows 7 install on this box that works properly. I cant seem to make this work with the third monitor and the nvidia video card.
I had originally followed the advice at Mauriat Miranda's Fedora Nvidia Driver Install Guide [URL] for installing nvidia's display driver on my HP Pavilion system 64 bit running Fedora 11. I had used his first method which just installs the relevant kernel module kmod-nvidia from RPMFusion. He also suggested an alternate method: obtaining Nvidia's installer NVIDIA-Linux-x86_64-185.18.36-pkg2.run and using that. I downloaded it from Nvidia, but I didn't run it.
I recently lost X. This had happened previously after a kernel upgrade, and I just used grub to boot an earlier kernel to recover X, and then installed the upgraded kernel module to fix the problem. But this time, being deeply involved in something else, I panicked slightly, and, using dumb terminal mode I ran the Nvidia installer. It asked me to make various choices and in response to my answers, it decided to compile a new kernel module. This recovered X, but I then compounded things by installing the updated kmod-nvidia.
I realized afterwards that using both methods might create some conflicts, but X seemed to run properly. (I can tell because graphics in the program Maple doesn't work properly with the default drivers provided by Fedora 11.) Since then, when I restart nvidia, I get.
[Code]....
My monitor kept powering down after 20 minutes so I installed Gnome-power-manager by yum so that I could change the settings. After the installation and every time I try to use it I get a message saying:
Quote:
Install problem!
The configuration defaults for Gnome Power Manager have not installed correctly. Please contact your computer administrator
I'm now unable to effect a change in the power settings and the display keeps turning off.
1) Is someone able to post their config file from a working F12 install? I believe it's /etc/dbus-1/system.d/gnome-power-manager.conf but not certain as I don't have one ;-)
2) ~/.gconf/apps/gnome-power-manager/%gconf.xml is empty - is it empty for someone with a working install?
3) how I can change the power settings without the gui - I'm googling on this point and will post the answer as and when I find it.
Code:
[ecvej@desktop ~]$ uname -r
2.6.31.5-127.fc12.x86_64
Edit: In case it is relevant, this is the contents of my /etc/gconf/gconf.xml.system/%gconf-tree.xml
[Code]....
I have nividea 8400 gs geforce gpu. i need some help about my graphic driver. what driver i need for mu gpu in fedora. i did not find any drivers for fedora linux, all drivers is for windows platform.
View 1 Replies View Relatedwhen i try to install the nvidia drivers with 'yum install kmod-nvidia' its worked before, but now i get this (look at the bottom for where it goes wrong)
[root@localhost Tom]# yum install kmod-nvidia
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Setting up Install Process
Resolving Dependencies
[Code].....
I have Fedora 15 on my 64 bits PC, and i install the nvidia propetary driver using the rpm fusion repository and the metapackage "kmod-nividia".
The installation works fine, but the drivers not, it seems like Nouveau run's better.
So... can i uninstall the nvidia drivers and fedora automatically use Nouveau??, or the system loose both drivers?
I updated fedora 10 a few days ago, by blindly installing every update available, and when i restarted, my nvidia drivers weren't loading, and I'm having an issue I had before, where the signal being sent to the monitor is out of frequency range. Basically when fedora tries to load its GUI, my monitor just goes blank. Before I could only fix it by plugging in a different (less tempermental) monitor, and messing around with the display driver.
I was wondering if there is a way to mess with the drivers from the command line. I really don't like switching out monitors, and i want to learn the skillz and such.
For a new project at work, I'm looking into building a processing farm of a few dozen Tesla 1U servers from Nvidia. This has lead us on to figure a way to let the developers run tests on their own workstations (with the appropriate gfx card).The cards we're looking at are Quadro FX 1800 or 3800's to provide quite a bit of poke.
Thing is, I'm having issues with running any Cuda code successfully on systems installed with the pre-built nvidia drivers from RPMFusion. I can only get code running if I download the nvidia or cuda drivers from nvidia and install by hand. Not something I'd like to be maintaining across all out developer workstations. Is anyone out there running Cuda on Fedora/RHEL5 platform? If so, are you using RPM nvidia drivers or building them by hand?
I tried again (with easylife this time) and I got the same result - once the kmod was finished I just got a cursor - so two tries with two different methods, same result. So, is there a generic type driver that will at least take advantage of some of the features of my geforce 6800?
View 10 Replies View RelatedI am a real Linux noob lol XD. So sorry if this questions seems a bit easy for some. So here it goes: I want to install NVidia drivers for my laptop and need a compiler to actually install them. I do not have any installed and would like to know how to install gcc, as in the error when i run NVidia driver it says that I need it.
View 9 Replies View RelatedI've been scouring google, using all forms of guides to try and get these damn nvidida drivers installed so I can move my resolution from 800x600 to 1280x1024 (I have a small monitor) I'm running a NVidia GeForce 260 GTX. I've executed yum update I've run rpm - [URL] and everything installed. I've edited grub.conf to disable the default drivers.
[Code]....
