Ubuntu Installation :: Cusor Disappears After Upgrade To 10.4 / Resolve This?
May 16, 2010
I am currently using Ubuntu 10.04 after kernel upgrade.
The pointer is visible at the login screen, but after I login, it disappears. Never had any problems with earlier distributions.
I was still able to figure out where it was because of the hover effects (you know, the brightness change of a button or link when you hover your mouse over it) and quicky changed the settings in System>Preferences>Mouse to show where the mouse is when I pressed ctl key.
I can get the cursor to be visible by sudo lshw -c display, but that is only temporary. If I reboot I have to do that again.
This is the information I get when I do lshw -c display code...
I'm running this on an old Dell Optiplex GX260 with onboard video.
Anybody have any ideas on how to make the pointer show up on a more permanent basis?
Also, it seems screensavers are giving me problems as well when they never used to. They just blank my screen and I have to reboot.
View 9 Replies
ADVERTISEMENT
Sep 5, 2010
Two days ago I upgraded to Maverick beta and I ran into some problems. At first I couldn't get the X server running, but I fixed it by running in failsafe mode and restoring xorg.conf.
After doing that, the titlebar disappears when I set a window to full screen. This is very annoying and I hope it's not meant to be that way.
How can I fix it?
View 1 Replies
View Related
Dec 28, 2009
Inserting any CD crashes Nautilus and all desktop Icons disappears. Eject the CD. Icons comes back and everything is fine.
View 2 Replies
View Related
May 3, 2010
The other evening I was in the lengthy process of upgrading from Ubuntu 9.10 to version 10.04. It had downloaded all the packages and was in the process of upgrading when a thunderstorm blew in. The power failed momentarily. The system crashed and the installation did not complete.
The system is dual boot to Windows XP. From GRUB when I try to boot Ubuntu the display goes dark, after a few seconds of the white Ubuntu logo. If I hit ENTER I get a flashing Cursor. I can boot to System Restore and get the Recovery Menu. I don't know if there is something I can do from there to repair/finish my upgrade, or even revert to version 9, when I could restart the upgrade.
Can I burn a Live CD for version 10.04 and finish the upgrade? This would salvage the settings, printer drivers, and other programs that I have installed. If I have to make a brand new installation I have to rebuild all of the things I spent many hours getting setup.
View 5 Replies
View Related
May 31, 2010
I've just updated my desktop to F13 using preupgrade but now grub won't boot it. The upgrade seemed to go OK, and none of the disk partitions should have changed as far as I'm aware, but now I get an error
VFS: Cannot open root device "UUID=xxx" or unknown block(0,0).
View 1 Replies
View Related
May 22, 2010
I upgraded from 9.10 to 10.04. Previously, I had a dual booting system where GRUB allowed me to boot 9.10 or WinXP. I have two hard drives - an 80 GB drive with XP and a 1 TB drive with Ubuntu.
During the upgrade I chose to upgrade my GRUB version. I only selected to install grub on the Ubuntu drive. I didn't work - I couldn't even get GRUB to load. It just gave the error: the symbol 'grub_puts_' not found.
So I reconfigured GRUB and installed it on both drives. Now GRUB loads and I can boot 10.04 just fine, but I can no longer boot XP.
What command should I run to give you a glimpse of my system? Would that help diagnose this?
View 7 Replies
View Related
Feb 9, 2011
My version of Squeeze was about half a year old when I updated/upgraded it just now. As part of the (longish) process I was advised to run apt-get autoremove, which removed what looked like a stunning amount of material. As another part I noticed a huge number of error messages about nonexistent locale files (I think) whizzing by.
Well, the result has various cosmetic changes and no doubt fewer bugs, but it doesn't have WLAN. I used to see an icon at the top right like two tadpoles chasing each other, turning into a set of green (if I was lucky) or grey (if not) bars. No longer. No tadpoles, no bars, no error message, nothing.
This very recent thread ("Just isntall debian 6.0, wired networking ok but no wireless") looks helpful. However, I don't know what WLAN hardware I've got or how to get a text dump of this kind of thing. 4D696B65 kindly points the person who asked to wiki.debian.org/ipw2200. I don't know whether I have any of these "Intel PRO/Wireless 2100, 2200 and 2915 devices" but I'm encouraged to read there that [the file] is now also available in the nonfree-firmware tarball which we build regularly on cdimage.debian.org. Supply this blob on a CD/floppy/USB drive etc. and d-i will do the right thing. I don't know what either "blob" or "d-i" means, but I was rather hoping that some software or other would look at the hardware, look at the available firmware, and install accordingly (as happened months ago). So got the (small) file; I opened it up; I copied the contents to a CD (even though it's not an ISO). But apt-cdrom add is not interested.
View 14 Replies
View Related
Apr 30, 2011
Topic says it. Postfix was receiving emails just fine on 10.10, did the upgrade, now every host is unkown...even though I can dig -x from the machine and resolve.
View 3 Replies
View Related
Jul 27, 2011
There's something very weird going on here...after upgrading to Natty, my Terminal just won't open. I've tried uninstalling it and then installing it again, with no luck.
When I open it, it appears on the launcher menu as active, its menu even appears at the top bar. But there's absolutely nothing on my screen, no sign of terminal. I press alt+tab, and nothing.
I thought it was an issue related to Unity and its window scheme, so I tried logging in using the classic ubuntu - still no luck. This time, I click on Terminal and its window appears in the bottom screen (as a minimized window would), but I can't restore it. It's just not there.
Since this is kinda of a serious issue, has anyone experienced such problem? Should I report it to the development team, how?
View 2 Replies
View Related
May 18, 2011
I've been messing around with this for a while trying different mesa packages so far none of them have resolved the issue. XFCE, Fluxbox all work however kde wont load for some reason. Ive even tried using the drivers direct from dell as this is a poweredge t310.code...
View 3 Replies
View Related
Apr 4, 2011
I'm running 10.10LTS at present, I upgraded via the Upgrade Manager last night, Firefox 3.4 and D-bus stuff if I remember correctly. The system then gave the "restart now or later" buttons and I hit the "now" one. My system, an AMD 3800+ dual core job in an MSI mobo then shut down and, er... died. hitting the momentory action power switch gives an ocasional short noise but I have no power/fans or anything. It's a 480 Watt PSU with green leds and stuff I don't really need but the price was good, so I'm not convinced that it's dead... yet.
Is it possible for an upgrade to stuff the power-up circuitry? Maybe power management?
My next step is to swap the PSU to eliminate this as the "faulty" item. It leaves the Mobo, screwed CMOS and possibly the switch cabling/connector but it's all a bit suspicious. I'm basicially a hardware guy so that's the path I'm following. Unless the upgrade's written to somewhere it shouldn't?
I haven't had time to investigate further as I was dragged away shouting and screaming to a prior engagement by "she who must be obeyed".
View 9 Replies
View Related
Aug 11, 2010
Been trying to upgrade home server for several days and it keeps hanging on the mysql upgrade. Here's the what apt-get says code....
View 3 Replies
View Related
Sep 21, 2010
I have reinstalled 10.04 several times and have the same result. After the install everything works and looks great. Then after the first power down and reboot the top menu bar and bottom panel are gone.
The desktop wallpaper (bare of anything) is there, still responds to right-clicks, etc, and the system seems to function, but the menu bar is missing. The extents of the desktop are still the same, so it's not the desktop extending outside of the screen display area (mouse doesn't disappear over the edge).
I can alt-F1 to get to the menu bar menu items, and they function - appearing from the top edge of the screen, but cannot activate them via mouse. I have reinstalled several times and this consistently happens every time. I had 8.10 on this box and it didn't do this. I reinstalled 8.10 and it was fine again, and then back to this with reinstalled 10.04. The 8.10 was a virgin install and I reformatted the drive on every install so there's no legacy crap clinging on.
I can use ctrl-alt-del to shut down/restart/etc., and alt-F2 gets me the command line. All seemingly functional.
View 9 Replies
View Related
Oct 12, 2010
I was looking in to a easy to use linux distro to surf the internet, do some text editing and emailing for my moms old laptop, cause its being very slow with windows xp on it.
specs: intel pentium 4 2.4 ghz
256mb ddr ram
40 gb ide harddrive
nvidia geforce go 4 series gpu.(if I remember correct it is a MX 440)
brand medion
I figured out Lubuntu would be al right, so I connected my usb cd/dvd reader(cause intern cd/dvd drive is broken) put in a disc that I burned with my other pc and started up the os. the live cd is working al right when its at the menu and I choose to start it it hangs for 30 sec-2 min then it starts to load and eventually the desktop shows up then I can start to do things but as soon as I open something the gui disappears before the program opens.
I tried to run the installer but I get the same issue. I see my mouse changing when I start the installer the mouse pointer doesn't points to the left side of the screen any more it points at the right side(which is strange) I tested this on my other pc and the installer loads up just fine and everything works ok(though I still have the mouse pointer issue if I start the installer)
btw if you got any ideas for a better distro these are the requirements: my mom is a linux newbie so an easy to use, lightweight distro for internet browsing, emailing and text editing(word) is needed. I think lubuntu will do? btw2: is there any way to import settings from the windows os to the linux os? btw3: dual boot should work just fine if I install this without deleting the windows partition right?
View 9 Replies
View Related
Jul 26, 2011
I'm using sid and Gnome3 since two months. This morning I was operating an upgrade on my system with "aptitude update && aptitude safe-upgrade", and after rebooting gnome crash and tell me to restart my session.code...
Is there any others log files where gnome3 writes errors ?
View 1 Replies
View Related
Jan 20, 2009
I'm trying to install F10 on an Abit VP-6 mobo with an old Lite-On DVD drivethe install begins, it loads the kernel, it asks for keyboard layout, asks for languagethen it says it can't find the installation media and offers to let me pick from a bunch of drivers that look to be mostly for wireless cards and SATA controllerswhat gives?it had to read the drive to get this farwhat changes part way through the install to cause this?just for grins I tried installing openSuse and had similar resultsthis ring any bells?
View 4 Replies
View Related
Oct 18, 2010
I am user of ubuntu 10.10 beta version. I installed windows 7 on ubuntu but after that ubuntu doesnt boot up! Somebody please help me.I have ubuntu 10.10 live cd for 32 bit desktop edition.I want to rescue this problem.
View 2 Replies
View Related
Aug 19, 2011
During my upgrade this fine afternoon, my system went into screensaver mode and would not bring up the security window. The window would flash for a very brief period and then disappear. I tried to enter the password to no avail. After 10 minutes of this, I gulped and re-booted. It seems to boot ok, but just like in the install, the login security window flashes and disappers. I have tried to type in the data with no luck. Does anyone have a work around? I am currently using my knoppix live disk until I can burn a deb live disk.
View 11 Replies
View Related
Apr 1, 2011
I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):
Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!
Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).
View 9 Replies
View Related
May 28, 2010
I have Fedora 12(Constantine) i686 installed on my PC as my O.S. i got a porblem that when i was trying to install the a bundle(NetBeans IDE 6.8 with JDK 6 update 20) after sometime my PC restarted itself due to electricity problem. When it was started i saw the icon of NetBeans IDE 6.8, then I tried to open it, but all in vain. A screen opens for a few seconds and then it disappears. I think it is the problem of improper installation. And now I m totally unable to uninstall that bundle.
View 5 Replies
View Related
Feb 12, 2011
I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
View 1 Replies
View Related
Jun 27, 2010
I want to install Ubuntu 10.04 on a brand new hard disk. It shows in the "Use Entire Disk" drop down as /dev/sda.
I don't want to use the entire disk, so I select advanced partitioning. I select the disk, and click "New Partition Table". I get an error dialogue with a title of "??? ???" and the message of "??? ???".
After this happens, I can click on "New Partition Table" to my hearts content, and nothing happens.
Going back to the previous screen after this has happened, and my new, blank disk is no longer in the drop down.
View 9 Replies
View Related
Jul 22, 2010
Earlier this afternoon I updated Ubuntu and now Firefox will not start. It will show in the task bar that it is "Starting" then that disappears and nothing happens
View 1 Replies
View Related
Feb 26, 2011
I have downgraded from Ubuntu 10.10 to Ubuntu 10.04. I've had some bumps along the way and finally was able to install 10.04 successfully. Right now, my computer will not boot from the HDD and will only boot from the USB drive that the LiveCD is on. When I reorganize to set HDD as primary boot, i get:
id-laptop login:
id-laptop password:
and I can put that in but then it just gives me a command line that says"id@id-laptop:~$
How do I get it to boot from the HDD instead of from the USB without running into this problem?
If I resequence the boot to HDD as number two, it will juts go into the LiveCD mode. Am I supposed to reinstall 10.04 again? I know 10.04 was successfully installed because it said it was and it needed to restart so i hit the restart button. It also had my old desktop picture there and all my files AND i checked the system info before restarting (it confirmed that lucid lynx was running).
View 9 Replies
View Related
Apr 21, 2010
I'm running Ubuntu 9.10 along with Windows 7. I tried installing the TOR proxy thing long back, and today when I tried downloading a package it gave me that. Now even if I try updating my system, it says:-
Code:
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/karmic/Release.gpg Could not resolve 'TOR'
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/karmic/main/i18n/Translation-en_IN.bz2 Could not resolve 'TOR'
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/karmic/restricted/i18n/Translation-en_IN.bz2 Could not resolve 'TOR'
[code]....
View 2 Replies
View Related
Jun 13, 2010
Yesterday i upgraded to the latest version, but after restart it froze on the splash screen, giving me a colorful collection of pixel-blocks full-screen...
Rebooted, chose recovery-mode and got this error-message:
(EE) open dev/Fb0: no such file or device
(EE)Radeon(0): [dr] RadeonDriGet version failed to open DRM
I am a total noob, and have installed Xubuntu as a sort of dual-boot backup on my winXP machine.
View 1 Replies
View Related
Aug 10, 2010
I've never used Ubuntu before and I was having some trouble booting. I've tried both installing with Wubi and also the full installation, but using either method I get the same result:
After selecting Ubuntu on the boot menu it says its finishing installing and then my laptop precedes to practically "shut off." The screen goes blank and the light on my optical mouse goes off. Only the fan runs and it begins to go very quickly. At one point I even left it on for several hours like this to make sure I wasn't being too impatient, but nothing happened.
Currently I have a Toshiba Satellite A505-S6033 with an i7 processor and 4GB of ram. I also only have one hard drive which may have complicated my problem.
View 5 Replies
View Related
Jun 1, 2010
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies
View Related
Jan 6, 2010
I have recently setup Ubuntu 9.10 in my USB pendrive using LiLi USB Creator tool.
I have given persistence with 1530MB.
Now the problem is if i want to install any software from the Ubuntu Software center, it shows a message
Code...
I have no idea how can I solve this .
View 1 Replies
View Related
Mar 17, 2010
I am Quad booting my lappy with Fedora 12, Opensuse Karmic and Vista.
Grub2 is not picking Fedora even after i had done Grub update command.
I never edited Grub 2 thing and even /boot shows menu.lst.
sda6 contains opensuse and sda7 having fedora 12. Please let me know how can i edit Grub2 for fedora 12 entry code...
View 9 Replies
View Related
