Ubuntu Installation :: Geom Error - Cannot Boot Into Any Of The Operating Systems
Apr 24, 2011
I just installed ubuntu on 60GB of unallocated space on my second drive and am now receiving a Goem error. Before, I was dual booting with two Windows 7 installations, using the second drive to store data and the second Windows 7 installation. I cannot boot into any of the operating systems.
View 1 Replies
ADVERTISEMENT
May 11, 2010
I am preparing to do a fresh install of lucid lynx dual boot with vist@ Currently I am running 9.04 in this configuration. The install guide for Lucid says the new grub2 doesn't support more than 2 operating systems. plus I apparently can't edit it either. Besides vist@ there is a hp recovery partition which has a seperate entry in my existing grub. Does this mean I can't use the lucid desktop disk for a fresh install because I would have 3 operating systems? Lynx, vist@ and HP recovery partition.
I only have two applications left I am using on vist@, but I have no recovery disk, only an old image for my vist@. I am very concerned about this upgrade. 5.04 went smooth and each one since then has been a bit harder. I could not get 9.10 to run and had to go back to 9.04. I hope I am not at the end of the road. How about using grub instead of grub2?
View 9 Replies
View Related
Jul 16, 2011
I'm trying to dual boot Ubuntu and Win7, and I just did a clean install of Win7. However, when I start the Ubuntu installation it merely just says no operating systems detected and my only option is to erase the whole disk. I can see the NTFS partition in disk utility but can't see anything in GParted.
I've tried to look through the forums but can't seem to find a solution to this exact problem - does anyone point me in the right direction or to the solution?
View 2 Replies
View Related
Aug 23, 2010
I currently have Windows 7 installed. I wish to dual boot this with Ubuntu 10.4. On a 120gb drive I allocated a large percentage to Windows and have put two partitions on the end; 1gb for swap, 15gb for Ubuntu. However, when I go to install and get to the partition manager bit it claims no operating systems have been found. Contrary to this, when I boot into the live CD it sees all the partitions, however these cannot be accessed and no error messages are displayed (However, accessing the Windows partition appeared to corrupt the install and I had to format...). When running install from the live environment the same no operating systems found error occurs. Windows 7 works fine and the drive is IDE (if this makes any difference).
View 2 Replies
View Related
Apr 4, 2011
Sorry for the hard to understand title but it's difficult to describe in one sentence. What I'd like to do is install Windows and several different versions of Linux on the same system. After everything is installed, I'd like to switch between operating systems *from inside the operation systems*.
Example: I'm inside Windows but I want to reboot into Ubuntu 9.04. I need to run a command to update the boot manager so it knows to boot into Ubuntu 9.04.
I do not want to walk to the physical box to make a menu selection. EDIT: I'd like to be able to switch between Windows 7 and Ubuntu (9.04, 10.04, and 10.10)
View 6 Replies
View Related
Jan 31, 2010
i dont know if this is the right section for this but i installed linux after i installed windows server 2003 and some how the grub loader got messed up and wouldnt show, only windows would boot. i fixed the grub loader through my live disc and when i select Other operating systems i get Error 11: Unrecognized device string. here is my fdisk -l.
Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x2c8e2c8d
Device Boot Start End Blocks Id System /dev/sda1 * 1 6 48163+ 7 HPFS/NTFS /dev/sda2 7 34329 275699497+ 7 HPFS/NTFS /dev/sda3 34330 38227 31310685 83 Linux /dev/sda4 38228 38913 5510295 db CP/M / CTOS / ...
Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x99b707d2
Device Boot Start End Blocks Id System /dev/sdb1 1 38912 312560608+ 7 HPFS/NTFS
Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080
Device Boot Start End Blocks Id System /dev/sdc1 1 6 48163+ de Dell Utility /dev/sdc2 7 38227 307010182+ 7 HPFS/NTFS /dev/sdc3 38228 38913 5510295 db CP/M / CTOS / ...
and here is my menu.lst
[Code]......
View 2 Replies
View Related
Jan 30, 2010
i dont know if this is the right section for this but i installed linux after i installed windows server 2003 and some how the grub loader got messed up and wouldnt show, only windows would boot. i fixed the grub loader through my live disc and when i select Other operating systems i get Error 11: Unrecognized device string. here is my fdisk -l.
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2c8e2c8d
Device Boot Start End Blocks Id System
/dev/sda1 * 1 6 48163+ 7 HPFS/NTFS
/dev/sda2 7 34329 275699497+ 7 HPFS/NTFS
[Code].....
View 2 Replies
View Related
May 22, 2010
I upgraded from 9.10 to 10.04. Previously, I had a dual booting system where GRUB allowed me to boot 9.10 or WinXP. I have two hard drives - an 80 GB drive with XP and a 1 TB drive with Ubuntu.
During the upgrade I chose to upgrade my GRUB version. I only selected to install grub on the Ubuntu drive. I didn't work - I couldn't even get GRUB to load. It just gave the error: the symbol 'grub_puts_' not found.
So I reconfigured GRUB and installed it on both drives. Now GRUB loads and I can boot 10.04 just fine, but I can no longer boot XP.
What command should I run to give you a glimpse of my system? Would that help diagnose this?
View 7 Replies
View Related
Oct 13, 2010
Tried installing Linux (Red Hat 5) along with Windows 7. I created a new partition (10 GB in size) and used it for the Linux installation. After install, I was getting GRUB geom error and my system wasn't booting.
After a few tries I had to format my entire hard disk and run fixmbr which came up with the following warning message: A new MBR will be created and some of the partition may become inaccessible
Now, even though I have gotten back Windows, the Linux partition is not at all visible. (Seems like the warning message has become a reality as that partition looks like has become inaccessible.)
My new hard disk capacity has also reduced by 10 GB and it is not showing up using any software.
How can I recover that inaccessible partition?
I tried fdisk via Linux Rescue disk. Got an error 22, the details as follows:
No luck booting in Windows.
View 2 Replies
View Related
Apr 26, 2010
I just downloaded the program, reviewed it using the cd, and I like it very much.I have Windows XP and Unbuntu 9.04 installed.I know that 10.04 uses GRUB II.If I install Ubuntu 10.04 RC in a partition, will I still be able to load the other two operating systems?
View 2 Replies
View Related
May 8, 2010
I have been reading around the internet but I cant find any solutions, and on a side note im new to linux.When I try to install ubuntu 10.04 on my dell xps 420 desktop it doesn't detect my windows 7 install, would this have anything to do with me having my RAID set to on? and if I do change my RAID settings will I damage my windows 7 installation?here is my sudo fdisk -l:
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]...
View 5 Replies
View Related
Nov 4, 2010
I am attempting to install Ubuntu via a USB stick. I have Ubuntu on the USB, I have booted from the stick and I have made it to the installing window. My problem is, I do not get the option to install next to other operating systems, which is what I want.If I have not been clear enough then please let me know and I'll see what I can do.
View 6 Replies
View Related
May 18, 2009
I presently have Ubuntu and Windows XP Pro installed. By using the GRUB loader I can choose which to load.
I would like to install Fedora as a third option, but do not know how this will affect the GRUB and the choices.
View 2 Replies
View Related
Nov 22, 2010
I installed Fedora 14 in a dual boot with Windows 7 (Win 7 came preinstalled on my Vaio, I freed up 30 GB on a hard disk drive and installed Fedora in it).The first reboot took me straight to Windows. I could not find a way to get multiple Operating systems, so I tried looking on the net a bit, and installed EasyBCD. This gave me the option of choosing the boot up OS. But when I choose Fedora in the options, the screen changes to GRUB4DOS which lists Fedora and Other as my two boot options.Selecting either one of these options results in Error 22 No partition found.
View 4 Replies
View Related
May 2, 2010
I was wondering how to prevent grub2 from detecting operating systems on other hard drives. I have Ubuntu Lucid on the second hard drive with windows 7 on the primary (unplugged for now).
View 2 Replies
View Related
Jul 26, 2010
I have no clue how Linux works and I haven't had much experience installing/dual booting operating systems. Most of my knowledge in computers comes from fixing errors with crappy hardware or Windows. Now I want to learn how to use a computer instead of how to fix it. Hence, I want to have Windows & Linux on my computer. My laptop(Acer Aspire 4530) has two hard drives, one is Vista and the other was empty(until I filled it with stuff). What is the simplest method to install Linux (or any of its variations) on this computer? Do I just install/partition all of Drive B to Linux and leave Drive A for Vista?
View 3 Replies
View Related
Jan 17, 2010
But when I install new updates for Ubuntu and restart my computer to apply those updates.... a new Ubuntu with different number appears on the list of the operating systems that I need to choose from
[Code]...
does this mean every time I updated Ubuntu I'll have additional OS on my device?
View 3 Replies
View Related
Jan 22, 2010
I was wondering if I could make logical / partitions if I have a primary /boot partition. Is this a potential way to get around having only 4 bootable operating systems on a single HD?
View 3 Replies
View Related
Mar 13, 2009
I am unable to Install Fedora10 in my system as one of the multiple operating systems and it gets hanged after probing for Hardware devices and so ...I get fedora trademark sought of symbol and even after waiting any amount of time it doesnt go further..neither the keyboard works nor the mouse pointer moves... I am stuck at this screen shown in the installation screenshot...I get this screen however I dont get the options back or next or its that I am unable to see this options on the screen at all and mouse gets hanged and even keyboard doesnt work...
[code]....
Initially after booting with the media it doesnt even prompt me to press any key to boot from CD or Dvd or I get any screen to select the option for the mode of installation like text based installation or graphical installation..it hardly shows me this screen for even a fraction of second as well...
It takes me to the screen
1) Install or upgrade fedora
2) rescue existing installation...
3)
4) Memory test
when I click on install fedora I am taken to the fedora splash screen and nothing goes ahead... I tried in rescue mode as well... In rescue mode it asks me for language selection...keyboard layout... later it doesnt go ahead as well... I have checked the installation media and it confirmed that the installation media is good... I use Redhat 4.1 version and It works fine except for the message drivers/usb/hid.c core message received at :75 while trying to restart shutdown or access a virtual console... Along with Redhat and while trying to install fedora I have windows server 2008,Windows vista on that harddisk...
View 4 Replies
View Related
Oct 30, 2010
I have a dual-boot ubuntu-Windows XP computer, and today, while rummaging in the basement, found some Windows 3.1 floppies. My laptop has no floppy drive, but just to ask, can you intsall old OSs (Winows 3, Mac OS 7)on your PC to make it tri boot if you already have some modern operating systems? And I've seen that old Operating systems can be downloaded, so how do you install those?
View 2 Replies
View Related
Nov 14, 2010
I have a 64bit ubuntu 10.10 and i want to know how to switch to my other OS which is windows ! but unfortunately i set it to go directly to ubuntu ! so how do i switch from linux to 2nd OS ? cuz i want to remove ubuntu completely and reinstall it as 32 bit !?
View 4 Replies
View Related
Jul 2, 2011
I "experimented" with UNetBootInstall on a USB key and messed up my GRUB2 settings pretty good. Now I can't find a grub.cfg file.I've gotten a couple of error messages about not having an OS installed on the computer. I have Natty Narwhal installed as well as Windows 7 with Wubi.
View 9 Replies
View Related
Jan 13, 2010
I have both windows XP home and Ubuntu 9.10 installed on my computer. I started with Ubuntu 8.04 (i think that was the number) and it has updated a few times since then. You see the thing is that when I choose an operating system at the boot up, it lists all of the updates to ubuntu. so there are like 12 options to choose from besides windows XP and Ubuntu 9.10.
View 3 Replies
View Related
Feb 7, 2010
I have Ubuntu and Windows on the same machine. If I install Thunderbird on both operating systems is it possible that both installs can access the same email files so that all of my emails will be in one file no matter which operating system was running when emails are downloaded or sent?
View 6 Replies
View Related
Feb 12, 2010
I'm Dual Booting Ubuntu and Vista and i downloaded gparted today because i wanted to resize my operating systems so that Ubuntu had the majority of the hard drive. I was able to resize the vista part so that it was smaller, however i can't figure out how to resize the ubuntu half so that it takes up the unallocated part. I am currently in the process of changing over completely to ubuntu but i dont want to get rid of vista completely just yet.
View 7 Replies
View Related
Apr 20, 2010
How can I send out a broadcast from one device to the other machines on the LAN to reply with their operating system.
View 7 Replies
View Related
Oct 17, 2010
Is it possible? (and probable?) I've successfully followed psychocats' tutorial on creating a separate home in ubuntu and noticed that it basically "only" needs fstab editing, so I wonder if could create the same home for two OSs (ubuntu and fedora). The only problem which comes to my mind is file/folder ownership but I'm not sure. and since I'm just a newbie, I think it'd be better if I consult to this forum first before messing up with OS.
View 9 Replies
View Related
May 12, 2011
I am looking for recommendations on books and studying material for a person starting from zero and wanting to become a very competent user of Linux operating systems. From learning the very basic commands and use of the terminal to contributing to the development of a distro.
Can someone please suggest any books or authors that would be suited to start a program of this sort? (It would be preferable if they are available in hard copy format but e-books could also work)
I would also like to have an expert opinion on how much time you think it would take to get from novice to expert in the Linux world if devoting roughly thirty five hours a week. I intend to compile a step by step curriculum from personal experiences.
View 9 Replies
View Related
Jan 24, 2010
I have winxp and win 7.I want to install fedora core 12.I tried but I could not install.How can I install fedora core 12 with winxp and win 7.
View 3 Replies
View Related
Aug 17, 2010
Is it possible to remove the entry 'Other operating systems' from the Grub menu display? I mean that it can be commented in menu.lst,but will it affect other OS(Win XP in my case) in any way?
View 2 Replies
View Related