Ubuntu Installation :: Getting GRUB Error 17 On Boot
Jun 17, 2010
I'm trying to fix the partitions on my laptop. how it was setup before I made the change:
[code]...
I shrunk the windows partition to about 150 gigs, and used the unallocated 25 or gigs and formatted it as ext4 and copied dev/sda1 to it. Now I have all the same as above now with
[code]...
I had two installations of ubuntu and deleted the sda1 partition. Now I get a GRUB Error 17 when I boot. I'm in a live CD and I have access to a console, how can I reconfigure GRUB?
View 1 Replies
ADVERTISEMENT
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Sep 4, 2010
I installed Ubuntu 10.04 LTS on a machine with 8.04 LTS, and have dualboot between those i system.The problem is when a start a get a message:'Boot error'If I hit 'Esc' I get to the Grub -meny and can boot as normal.
View 1 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Jul 30, 2010
I have an IBM T60 which already had Windows 7 and Ubuntu 10.04 running fine in dual boot. For work reasons, I also needed Windows XP, so I started to install it last night. The install didn't work because of lacking SATA drivers, but when I tried to reboot my computer, GRUB was giving an error. [grub rescue>] Rebooted with the live CD and attempted to reinstall GRUB, but I still get the same error when I restart. I reinstalled GRUB with the directions from here: [URL]...
View 1 Replies
View Related
Apr 10, 2010
I have a SONY VAIO CW26 laptop. I got a Windows-7 version prepacked with the laptop.I installed Ubuntu Karmic 9.10 over a new partition that i created using the inbuiltfacility in windows7. Both the operatings systems i.e windows7 and ubuntu karmic 9.1 were working nicely.Today i created 2 more partition within the partition inside windows.Once I rebooted after creation of the new partitions my laptop is just showing a black screen with following message.
GRUB loading.
error: unknown filesystem
grub rescue>_
[code]....
View 2 Replies
View Related
May 21, 2010
I have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
View 9 Replies
View Related
Oct 23, 2010
With a bit of help from this forum I managed to install 10.04. The solution was to add i915.modeset=1 to the options when booting up from CD.Now I need to do the same in order to boot up from HD. I've opened /etc/default/grub and changed the relevant line to include the above option. But I need to run "update-grub" and it comes back with an error to the effect that it 'can't find a device for / (is /dev mounted?)Also, the boot menu only has ubuntu - no sign of windows in my intended dual-boot. What can I do?
View 9 Replies
View Related
Mar 25, 2009
This will make the third time I have tried to load Ubuntu and it has wiped out my Win OS twice and am not sure it hasn't done it again. I installed a 40gb hdd as a slave, have XP on the master. In the process of installing I picked the drive that corresponded to the slave. Didn't understand the the names or titles Ubuntu used but proceeded and the installation went fine although I never saw a place to load Grub on the master drive. After rebooting a couple of times saw the option to click Esc for boot menu but the only choices given were Ubuntu, ubuntu recovery and ubuntu kernel. Can find no mention of my W OS. Have tried to unplug the slave drive but can't boot then as get error message of Grub error.
View 14 Replies
View Related
Apr 30, 2010
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
View 9 Replies
View Related
Jun 19, 2011
After installing FC15 on my computer, I cannot boot on my windows7 due to an error 18. I installed FC on 2 new partitions I created during the installation, so I guess they moved before my window's.Is there a solution to fix this without erasing my windows partition? (at worse, I'm ok with deleting my linux partitions for I haven't done anything with it yet).
View 5 Replies
View Related
Jan 31, 2010
I am upgrading a system to have encrypted disks, it's a two disk system, so I want the BIOS to look at /dev/hdb first to unlock it, then it should reboot, see that isn't a system disk and try to boot /dev/hda. Then that gets unlocked, and the system boots. After unlocking hdb I get a Grub error 17. I can't edit Grub to look at hda as on normal boot it hasn't been unlocked yet, so it can't see the file system at that point. I reformatted an old XP disk as hdb, and it worked fine, but I'd rather not install windows every time, just to reformat it as ext3. Is there a simple way of clearing the boot sector of hdb?
View 4 Replies
View Related
May 16, 2011
we have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies
View Related
Apr 9, 2011
I attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found.
grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
View 6 Replies
View Related
May 25, 2010
I have Ubuntu/Vista dual boot desktop with Single HDD (200GB) that i cloned to an external USB HDD (320GB) using clonezilla. My intention is to use the external HDD as a backup to up running in case my 3 year old desktop HDD fails. To make sure the clone is good to use if need, i connected external HDD to USB port and tried boot from it but got "Error 18". I tried to Google got some infoDid a fdisk -lu and got the following.
Code:
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors
[code]....
View 1 Replies
View Related
Dec 4, 2010
I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?
View 1 Replies
View Related
May 9, 2011
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
View 9 Replies
View Related
Feb 13, 2010
I used proprietary software (acronis trueimage) to clone an Opensuse 11.1 machine, onto another machine with somewhat distinct hardware (different motherboard, less memory). I expected to have to change entries in /boot/grub/menu.lst, /etc/fstab, etc. I was told a good way to do this was to use the Opensuse DVD's "repair installed system" feature.
When I ran the repair, I was informed that "bootloader configuration file contains errors". I attempted to re-install the bootloader, but received this unhelpful error: "An error occurred during boot loader installation. Retry boot loader configuration?". When I boot the system, I just see the text "GRUB ", followed by a flashing underscore character.
View 4 Replies
View Related
Mar 7, 2009
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
View 6 Replies
View Related
Jan 30, 2010
This is what I get when following the instructions to fix grub. I type in "grub-install /dev/sda" and that's the error I get.I'm trying to put Ubuntu or Mint on a Dell Mini 9 with 16gb ssd, but no matter what I do I cannot achieve this goal
View 4 Replies
View Related
Feb 11, 2010
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
View 4 Replies
View Related
Nov 30, 2010
just installed ubuntu 10.10 on my external usb hdd from my 8gb flash drive doing this on a laptop, my primary hdd (internal) is running windows (230gb of 250gb used) so i got an external hdd (2tb) and I decided to install ubuntu on it
[Code]....
View 1 Replies
View Related
Jul 13, 2011
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
View 3 Replies
View Related
Jun 7, 2010
I cannot count how many times I have re-installed squeeze, and do all kinds of fixes to grub, but no joy. Every time, there is this ntoskrnl.exe error, and to re-install it. I thought my WIN XP may be corrupted, so I reinstalled it, and updated it with sp3 and all updates. Then I re-installed squeeze (reformatting all partitions). At the end, the installer ask if I want to install grub to mbr. I replied yes. After reboot, only the 2.6.32.3-amd64 and the recovery kernels show up on the grub screen, no winxp.OK, I booted into squeeze kernel and looked at the /boot/grub/grub.cfg file, and there winxp is not included in /etc/grub.d/30_os-prober section. In terminal, I typed
#os-propber and it found winxp in /dev/sda1
then I typed
#update-grub
and now /etc/grub.d/30_os-prober now show winxp.I rebooted, and winxp shows on the grub screen, and I chose winxp.It came back with "ntoskrnl.exe ...error... re-install ntoskrnl..."Here are the details:
fdisk -l
root@SHUM-AMD64:/home/shum# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
[code]....
View 14 Replies
View Related
Jun 10, 2011
I have been following this tutorial [URL]. When I get to the end of the installation and try to install GRUB to the /boot partition I have set up it throws a fatal error at me. No explanation other than it can't write to the specified location. I double checked all the partition settings which were the same as the tutorial then skipped the GRUB installation and finished. The only thing I can think of that might be wrong is that the 250MB partition size specified for /boot in the tutorial is too small.
View 2 Replies
View Related
Jul 5, 2011
I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code:
fdisk -ls
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....
View 5 Replies
View Related
Nov 23, 2010
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
View 5 Replies
View Related
Jan 18, 2011
I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked
- i did the windows cd fixmbr trick, not worked
- reinstalled debian with fixmbr the first step and nothing
- tryed deleting with dd the mbr, not worked
- reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
View 14 Replies
View Related
Jan 12, 2011
I had a working dual boot Ubuntu 10 and Windows 7. Anyways long story short, I got it working again but have lost the boot option for windows 7. If i run fdisk -l, I get the following.
root@support-Latitude-E6400:/home/support# fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
[code]....
I installed gparted and can see that windows 7 is installed in dev/sda6. In another forum, i read that someone had to edit their menu.lst so i did with the following.
title=Windows 7
rootnoverify (hd0,6)
makeactive
chainloader +1
When i try to boot from windows 7, i get the following error. Error 12: invalid device request. How can i get my laptop to boot from windows again?
View 9 Replies
View Related
Apr 7, 2010
after doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
View 2 Replies
View Related
