I'm trying to install Ubuntu 9.10. When it got to the "partition manager" stage of the installation, not only was I not able to decrease the Windows partition's size, I was also told that there was an error when partitioning and that the process has been aborted, I'm now just using the Ubuntu Live CD..
View 1 RepliesI am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies View Related1. I want to make some partitions to my 750gb HDD....i want a partition for my windows 7, parition for ubuntu and parititon for alll my DATA.... so how big should i make each partition?
2. Should i use 32 or 64 bit ubuntu? are the rules the same as for windows? where 64bit is faster and if your processor supports 64 bit u should get it?
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
[Code]....
I was trying to create a partition to share between Windows 7 (pre-installed, and I use it for some games and specific programs) and Fedora 15 (I use it for everything else), but when I tried to do this, apparently I already reached the maximum of primary partitions, 4. So I have 3 for Windows and 1 for Fedora!
The schema I have (see picture) is, 10.5 GB for windows recovery, 100MB for windows boot, 341GB for Windows 7, and 48 GB for Fedora, and it's in a dual boot. My intention was to leave about 100GB for Windows, 50GB for Fedora and the rest for shared files.
But I also don't want to format the recovery files, I had luck when windows broke and I could recover it with this files (I don't have the installation DVD, but it is original and validated), so I would like to keep those files.
1. I make a backup (I have no idea of how or if this is even possible) from fedora of this partitions and save them as files.
2. I try to include the /boot of windows in the big windows partition, but, is this really needed? Can I just delete the 100MB windows booter? (is it enough with the Fedora one or do I need this one?)
Is there a way to make more than 4 partitions? (it would be actually a 3rd option, but I didn't find any info online)
I was trying to create a partition on my hard drive on Linux using the GParted program. I noticed my hard drive had a key next to its name but could not find information regarding it online. I proceeded to unmount the drive and made 2 partitions. However, it game me an error saying it couldnt make the partitions. I turned my computer off thinking i would get back to trying tomorrow. Today i turn on my laptop and see the usual hp screen. But after that it goes to a black screen with a blinking underscore looking thing. It goes nowhere from there. It usually goes to a black screen after the hp logo, that says GRUB loading.
View 7 Replies View RelatedI'm new to the linux just few days ago, tried my slef to install Ubuntu on my laptop then I have help of friend to install Opensuse for me in my laptop I face problems with Opensuse and couldn't solve it so my friend install the Ubuntu in the free partition which was 120Gb, and the rest of the 320Gb was dedecated to the OpenSuse, I see no use of having OS with problems in my laptop so I wonder how can I install Ubuntu once again in my laptop and give it the entire 320Gb at least to be usable in storage data
my laptop is dell xps it seem work fine with ubuntu
Model M1330
RAM is 4 Gb I think of upgrade it to 8 if it work with it
HHD is 320Gb 7200rpm
I'll be thankful to show me how I can use the maximum HHD size for Ubuntu
I'll use Ubuntu 10.04 LTS 64bit
I have 10.10 installed within my Windows Xp.All was fine.Then,I upgraded to 11.04.Boot screen etc is fine .Log in is automatic in Classic.Unity & Compiz not supported.Now,again everything is fine except that my xp partitions are not recognised and hence I can not mount them and access them.
View 5 Replies View RelatedI installed Fedora 11 on a server with 2 equal sized disks. I used the gui installer and didn't make custom setting changes to the partitions. One of the steps asked for me to choose the disks i wanted to use for this installation. I selected both disks and after the installation Fedora only sees one volume the size of both disks combined.Do I now have software raid0 or do I have something else?
View 3 Replies View RelatedI'm trying to install from the Live CD. I read the sticky about needing a /boot and a / partition. I think that sticky applies to me but I'm not sure; once the Live CD loads, I click the "Install to Hard Drive" icon on the desktop. It thinks for awhile but ultimately doesn't display anything.What I'm not sure about is how exactly I go about making those partitions. My current HD is a Ubuntu system (Karmic Koala), and its network slowness has prompted me to try FC12. I've backed up everything already, I don't need to preserve anything on the existing drive.
I'm looking for the easiest way to get FC12 installed. Should I fool with the partitions? I just download a different install CD i.e. a non-Live one? If so, which one? Do I need all 5 or so CD images? I don't have a DVD burner so downloading the DVD isn't an option. I'm comfortable working from a Linux command line once the system is working, but I don't have much experience "close to the metal" i.e. actually getting a system up and running.
I've installed the last year ubuntu 8.10 on dual boot with winodows XP, but then I had to format the XP so I lost the dual boot and access to ubuntu and I used only XP...Now, I downloaded Xubuntu 9.10, when I was trying to install it, when preparing the disks a message tell me that the PC has no operating system, then when I choose to manually partion the disk, xubuntu does not read the different partition I'm having and just display the hole disk as free space
View 9 Replies View RelatedI have been trying to put windows onto my system as I made the switch to full linux awhile ago, but the need for certain windows programs is obviously tough to break.
df -h
--------------------------
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 144G 59G 79G 43% /
udev 498M 260K 497M 1% /dev
none 498M 76K 498M 1% /dev/shm
none 498M 200K 497M 1% /var/run
none 498M 0 498M 0% /var/lock
none 498M 0 498M 0% /lib/init/rw
[Code]...
I am posting this information because in the other topics I have seen they always asked for them. Whenever I use Gparted though there are no options for me to make a new partition all the options are basically greyed out and I have even tried using it from gksudo. I am on an EEEpc and cant really do much from the way of live cd's as I have seen in other topics as well.
Please bear with me as I'm incredibly new to Linux and shell scripting and all that good stuff. This will be a fairly lengthy post, as I don't really know which information is pertinent to the problem at hand and which is irrelevant. I installed Ubuntu on my Macbook following the instructions on this page: [URL].. At step 7, /dev/sda3 was not in the dropdown menu of options, so I picked...I can't remember. Either /dev/sda or /dev/sda2. I think this may be the beginning of the root of my problems. Step 8 is where it all falls apart. I get the following error message: "Status: MBR partition table is invalid, partitions overlap. Status: GPT partition of type 'Unknown' found, will not touch this disk."
Sooo since I can't sync the partitions, I can't get Linux to load unless I'm loading it from the LiveCD. I've tried steps 1-10 on this page:[URL].. However, under step 4, I could either "Save" the file randomly, without actually saving it to /mnt/root, or I could just open it and run the installer. I think I went into FF preferences and changed it to let me pick where each download would be saved, but when I actually clicked on the download link and then "Save", after finding the folder and clicking the final button (Which I think actually said "Open" instead of "Save"), nothing happened. I tried running the rest of the steps after just opening the installer on its own, but of course just got error messages. I hate not being able to troubleshoot this on my own!
I will be getting a new computer soon, and I would like to transfer Wubi partitions from one computer with Windows to another. (The reason I want to transfer the partitions instead of just making a new installation is because I want to keep EVERYTHING intact and all the files/settings/applications/etc the same.)
View 3 Replies View RelatedI upgraded from 9.10 to 10.04 (no fresh install, an upgrade). During the upgrade, the installer asked me for the harddisks and partitions to include. I gave him the following ones:
Harddisk 1
1. Windows XP
2. Windows 2000
Harddisk 2
3. Ubuntu 10.04
After the installation was complete, I could only start Ubuntu. Both Windows versions just showed a flashing cursor at the left upper top screen. No HDD activity! How can I get WinXP and Win2000 selectable within grub2?
I'm setting up a new Dell as dual boot. I'm leaning toward first partition for Windows 7, a second partition that can be accessed from either OS, and an extended partition that will have root, swap, /home, etc. For the partition to be accessible to both, what is the preferred format? I've read that FAT32 or NTFS will suffice. ext4 is what I understand should be set for the linux partitions. For the linux partitions, is there an advantage to setting one or two of the partitions as primary, rather than logical? Also, any clear advantages or disadvantages to having a /boot partition? It is likely I'll only have installed one version of Ubuntu at a time.
View 9 Replies View RelatedI'm trying to install Ubuntu 10.10 64-bit on my laptop HP pavilion 3046ee . When I reach the partition part , it doesn't detect the Windows 7 os , and doesn't detect any hard disk partitions ( it sees the whole hard disk as one unallocated partition ). I faced the same problem when I tried Ubuntu 10.04 LTS.
View 1 Replies View RelatedI want to install Ubuntu 10.10 on the hard disk, but the partition table looks a lot different than in Windows. I have uploaded two screenshots, one of the Disk Management from Windows ( http://oi56.tinypic.com/15y9bgw.jpg ) and another one of GParted ( [URL].... ). Also, I can't mount any of the partitions.
View 2 Replies View RelatedI read many threads regarding `gparted` not showing up hard disk partitions. Also read the advice not to change partition table according to solution to given to others. So posting my partition table here...
Code:
sudo parted /dev/sda print
Error: Can't have overlapping partitions.
Code:
mint@mint ~ $ sudo fdisk -lu
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
[code]...
I guess entire disk is taken as extended partition and primary partition(/dev/sda4) lying within this. So this is may be similar to thread [URL]. Correct me if I am wrong and also advice me on how to proceed further.
I am editing this post to save people time and effort. This is one of those "Pilot Error" issues or faulty readout issue, not sure which. It turns out that when I saved a document in PDF format to my NTFS Drive (the one I want to share between Windows XP and Ubuntu 10) the .PDF file extension was missing.
1. Ubuntu identified the files as a PDF document (even though the file extension was not there)
2. When trying to access it by double clicking it, the message was "Unable to open document, Permission Denied"
The problem was not permissions, and it was not a PDF file according to the default Document Viewer, but it WAS a PDF file according to the directory listing. The permissions message really had nothing to do with the problem, and identifying the file as a PDF document when it didn't have an extension, was another problem. What SHOULD have happened is a file without an extension should not be identified as a PDF file or If Ubuntu says it's a PDF file, and I double click it, why is the message "Permission Denied" ?? How about "No File Extension" or something like that?
Read the following if you want to see what my problem WAS before I just appended ,PDF to the filename, and now it works fine. On the positive side, installing XP first, then setting aside a large chunk of space for a shared NTFS drive, and THEN installing Ubuntu in the free space works fine. I installed a new 320 GB drive on laptop. Installed Win XP in 32 GB Set aside 250 GB for another Windows partition using MANAGE and formatted D: as an NTFS drive Then successfully Installed ubuntu 10 into remaining unused space. Problem: Ubuntu cannot access files from D: (NTFS Windows) partition. but it can WRITE files without problems, and create directories, just not read them. Have set properties of the Windows drive to shared, still nada. Any trick I'm missing? If I plug in an external USB drive, Ubuntu can read/write to it easily, it just can't read from the 250 GB partition formatted in Windows XP that I wanted to share between operating systems.
I would like to install Ubuntu on an HP Laptop, but they have taken up the whole disk with 4 partitions. I have removed Linux partitions and made an extended one in it's place creating new UUIDs before, but i am worried that windows will not recognize the new partition.
View 9 Replies View Related[URL](where loading into Windows corrupts the MBR). None of the solutions in the bug thread work for me, however--I'm on a Dell system (so it's not HP tools) and I'm not running PC Angel or any similar service (I checked). I assume it is related to the Dell recovery partition, though my old laptop from Dell didn't have this problem even though it also had a recovery partition.
However, before I had partitioned and set up Ubuntu on my new laptop, I installed Wubi (for transferring over the files from my old laptop because I didn't have time to do a full install and deal with problems like this one). Wubi worked fine using the Windows Boot Loader. I understand that WBL isn't capable of loading Linux on its own, which is why I was wondering if it was possible to have GRUB installed on a separate boot partition (not the MBR) and loaded from Windows Boot Loader. All of the information I could find on it didn't work with Windows 7--but again, I know Wubi was capable of doing it. how to set this configuration up?
i specifically told ubuntu to install alongside my operation system (windows) and instead it installed over windows and deleted all the other partitions... i had 200gb of data that i completely lost is there anyway to recover this data?
View 4 Replies View RelatedI played a bit with partitions. I'm not an experienced Ubuntu user, neither I have solid understanding of partitioning. And I hardly remember exact actions that led to this problem. I remember that I saw a warning in GParted that said that the partition was out of bounds or something.. But I followed some solution that I found on ubuntuforums and used fdisk to fix that. So, after installation of Ubuntu I couldn't boot into WindowsXP (after choosing Windows entry in grub2 menu I see only blinking cursor on black screen). But what's more important that I can easily mount Windows partition from Ubuntu. Also I tried to boot from Windows repair console and used FIXBOOT command, and copied[url].... and [url].... files to no avail..Here is the summary of what I got now:
Code:
sudo fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders[code].....
i had ubuntu installed on my computer via wubi inside my windows 7 OS..after a while something went wrong with the partitions magic stuff and windows 7 got corrupted but ubuntu kept working Love ubuntu for that.since i had my stuff backed up and saved in ubuntu i thought i could make a backup off the root.disk file and reinstall windows and that what i did but then i installed ubuntu again via wubi but replaced the new root diskk with the old one that i had backed up.but now it says it cant find disk :O .so it takes me to a shell i seriously need to get that root disk to work or ima loose really important stuf.
View 3 Replies View RelatedI'm trying to install Ubuntu 10.10 in a desktop computer with three disks. SDA with NTFS in SDA1, where I have Windows XP, SDB where I had Ubuntu 10.04, and SDC where I have an NTFS partition. I want to install Ubuntu 10.10 in SDB without loosing the data in SDA and SDC. When I try to install it, when I choose specify manual partition, I only find this: Where is SDB abd SDC? What do I choose in Device for Boot Loader Installation?
View 2 Replies View RelatedI installed Ubuntu 9.04 on my latop. I have an older 80 gig HP laptop with Windows XP. Currently, i have XP as the NTFS drive and it takes up about 72 gigs of space, the swap drive for ubuntu is about 256 MB and the ext-3 drive is 2.5 gigs. However, i have no more hard drive space to run or instal any programs on Ubuntu. So what i need to do is decrease the NTFS drive as i still have over 30 gigs of free space on my laptop and increase the ext3 drive to about 10 or 15 gigs and increase the swap drive?
View 3 Replies View RelatedI have Windows 10 and Deb 8 dual boot, and I need to re-install Windows but want to avoid (or at least plan for) losing Grub/Linux boot.
Last time I re-installed Windows after Linux I ended up having to re-install Linux again afterwards as well, because I couldn't recover it (seemingly due to complications from encryption). So this time I'm wanting to plan and avoid that.
CURRENT DISK PARTITIONS:
Code: Select allsda1 | 550M | EFI System
sda2 | 128M | Microsoft reserved
sda3 | 175.8G | Microsoft basic data
sda4 | 286M | Linux filesystem (Boot)
sda5 | 28.2G | Linux filesystem (Root)
sda6 | 91.3G | Linux filesystem (Home)
sda7 | 1.9G | Linux swap
[Code] ....
As there is a "Microsoft Reserved" partition and a separate Microsoft directory within the EFI partition, if I just go ahead and reinstall Windows will it install it's boot loader/image to one of it's own partitions? And NOT affect anything else like Grub and other Linux things?
Logic tells me yes, but there seems to be many issues on the internet about installing Windows after Linux.
My primary concern is whatever happens with Windows or anything to do with dual loading etc, is that Linux will still just boot, or I can get it working again without much hassle.
Why is there a reserved Microsoft partition AND a Microsoft directory in the EFI partition? Which one boots Windows?
Why is there a separate Linux Boot partition AND a Linux directory in the EFI partition? Which one boots Linux? Where is Grub invoked from, is one redundant, etc?
How these work. It is possible I've set them up wrong, or with redundant partitions, but both systems have been booting ok for months.
While installation of openSUSE on machine already having winXP and Ubuntu, I chose "Edit partition setup", I also chose GRUB: change locaiton to "MBR" enabled installation summary was something like this, shrinking sda1 to 13.02 and sda5 to 12.3 Gb, swap partition to sda3 (old linux), root partition to sda6(old linux), then began installation, and after sometime, while shrinking done with sda5, when started with sda1, it showed the following error- Failure occured during following action: Shrinking partition /dev/sda1 to 13.03 GB (progress bar might not move) System error code was: -3027. Now, currenly, i am not able to have my winXp back, during booting it shows: error: no such partition grub rescue>_
View 7 Replies View RelatedI'm running Debian Squeeze AMD64 with full disk encryption and LVM. After reinstalling Windows 7 I lost GRUB from the MBR. I managed to install GRUB after following this guide and using an Ubuntu 10.04 graphical installation disc, but I only get to a GRUB CLI when booting, so I can't actually choose an OS there.
I tried following this guide but I'm stuck after "# Mount the partitions to /mnt/root" and don't know what to do.
Does anyone know how I can fix GRUB so I get to choose between Debian and Windows 7 there?