Ubuntu Installation :: Error: Can't Have Overlapping Partitions
Jan 21, 2011
I read many threads regarding `gparted` not showing up hard disk partitions. Also read the advice not to change partition table according to solution to given to others. So posting my partition table here...
Code:
sudo parted /dev/sda print
Error: Can't have overlapping partitions.
I guess entire disk is taken as extended partition and primary partition(/dev/sda4) lying within this. So this is may be similar to thread [URL]. Correct me if I am wrong and also advice me on how to proceed further.
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
I'm trying to install fedora 12 on my pc, which has already a windows installation. I have windows on one partition, and had another partition to install fedora. I burned the DVD installation and booted the pc from it, no problem there.
I get to the part where i have to choose the partitions, and i deleted the unoccupied partition(which was NFTS i think), and tried to create a swap, a /, and a /boot with the free space on disk. But i get the message "can't have overlapping partitions" and well, I'm stuck there
Installation fails with PartitionException: Can't have overlapping partitions I am trying to install Fedora in my Laptop as a dual boot. I tried to create partitions like root ext4 then /home & /var lvm and swap but after applying write changes to disk I am getting PartitionException: Can't have overlapping partitions. So I tried several times just normal partitions etc. but didnt work. I found this on net
I think the installation caused the corruption of the partition table. I removed the last 3 logical partitions and gparted correctly reported the 2 remaining distros and the swap. The problem hopefully will be solved when I reinstall those distros. I have a 160 gig HD with 3 Linux,1 swap,and a Windows partition. I attempted to install PCLINUXOS unsuccessfully. When I rebooted I had the same grub. I checked gparted and it indicated all 160 gigs as unallocated. fdisk shows the partitions. and indicates one partition as empty where I attempted to install PCLOS.
No problem in accessing any of my distros, but currently I can't make any changes to my HD. I've tried parted magic and there was no solution there. I have been unable to download the Ubuntu Rescue remix. Is there a way to restore? I haven't used fdisk or cfdisk for that purpose. I am beginning to think I would need to delete all of the partitions in the extended. FDISK omitting empty partition (8)
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
I'm trying to install fedora 12 on my pc, which has already a windows installation. I have windows on one partition, and had another partition to install fedora. I burned the DVD installation and booted the pc from it, no problem there.I get to the part where i have to choose the partitions, and i deleted the unoccupied partition(which was NFTS i think), i tried selecting the partitions myself and tried too letting the installation choose the partitions.But i get the message "can't have overlapping partitions" and well.
After a fresh install of opensuse 11.3 x86_64, using a NET install CD, I noticed that the boot disk layout has overlapping partitions. I've noticed one other post that mentioned this at the very end. Is this a known problem already? Or is there something I'm missing that makes this okay?
Please bear with me as I'm incredibly new to Linux and shell scripting and all that good stuff. This will be a fairly lengthy post, as I don't really know which information is pertinent to the problem at hand and which is irrelevant. I installed Ubuntu on my Macbook following the instructions on this page: [URL].. At step 7, /dev/sda3 was not in the dropdown menu of options, so I picked...I can't remember. Either /dev/sda or /dev/sda2. I think this may be the beginning of the root of my problems. Step 8 is where it all falls apart. I get the following error message: "Status: MBR partition table is invalid, partitions overlap. Status: GPT partition of type 'Unknown' found, will not touch this disk."
Sooo since I can't sync the partitions, I can't get Linux to load unless I'm loading it from the LiveCD. I've tried steps 1-10 on this page:[URL].. However, under step 4, I could either "Save" the file randomly, without actually saving it to /mnt/root, or I could just open it and run the installer. I think I went into FF preferences and changed it to let me pick where each download would be saved, but when I actually clicked on the download link and then "Save", after finding the folder and clicking the final button (Which I think actually said "Open" instead of "Save"), nothing happened. I tried running the rest of the steps after just opening the installer on its own, but of course just got error messages. I hate not being able to troubleshoot this on my own!
I'm trying to install Ubuntu 9.10. When it got to the "partition manager" stage of the installation, not only was I not able to decrease the Windows partition's size, I was also told that there was an error when partitioning and that the process has been aborted, I'm now just using the Ubuntu Live CD..
I was trying to install Ubuntu as a dual-boot on my Windows Vista laptop. The hard drive is 250 gb: Vista boot 157 gb partition; a partially-occupied 33 gb partition which was designated as swap-space; a newly partitioned and ext3 formatted 30gb for the Ubuntu installation. I believe there is also a hidden partition ~20 gb with "hidden" system info. During installation I received an error message concerning the swap space partition, which forced me out of the installation and back to the ubuntu partition manager screen. Now in Vista my 33 and 30 gb partitions are missing. Is there anyway I can get back to pre-Ubuntu state?
I created a customized Lucid image and installed on my computer which has 1 hard drive (/dev/sda)When I booted up .. it gave me an error indicating "Multiple active partitions" ... and did not boot up ...
I used my live CD and run as live session to check on the hard drive, When I issued the command fdisk -l on an terminal , the out put indicated that only /dev/sda1 is bootable, and other /dev/sda* were not bootable ...
I am not sure why I got the "Multiple active partitions" message at boot up time ..
I'm trying to install Fedora 13 on my HP dv6 laptop and when I try to use the Use Free Space installation type, I receive a Partitioning Error: Could not allocate requested partitions - not enough free space on disks. Before I started the install, I used the Disk Management utility in Windows 7 to shrink the volume of the C: drive down to 242 GB and leaving 210 GB Unallocated. Here is what the screen looks like when I select Create Custom Layout (also receive the not enough free space error):
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
I'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
I've installed Linux quite a few times on many different computers and for some reason, I'm stumped.
I went to ubuntu.com and burned myself a boot-disk. Afterwards I went to my dad's original ME box and when I tried deleting the partition I got an error that said, "Could not change partitions, cause the disk could not be locked".
Created abt 16.4 gb free space using Disk Management in vista. I read the sticky on installing from the live cd and did accordingly. Whatever Partition i create first (boot or /), it gets done. However, when tryin to create the 2nd partition, i get "Could not allocate requested partitions:Not enough free space on disks." Cant proceed any further.
I cannot have any more than 47 characters on each line of my virtual terminal without everything on that line disappearing. The text is apparently still there, since commands that need more than 47 characters still work but the text stays hidden. After the text has been overlapped I can type as many characters as I like and it no longer overlaps, but my PS1 on that line and all previously overlapped text stays hidden.I'm almost certain that the problem is in my bash configuration since it happens in a terminal emulator as well as the virtual terminal.
I can't seem to run Evolution. Whenever I try to open it, I get a box asking for the password for my email account as well as a box asking whether I want Evolution to be the default mail client. The answer in either box is not acknowledged, and the only was I can figure out to close it is to "killall evolution". I'm having a hard time searching for bug reports--nothing seems to come up with the terms that I have used.
How can I reset this? I kind of want to try out the Contacts manager feature and the MS Exchange compatibility, but I use Thunderbird for my main email and I don't want Evolution to be the default. Incidentally I'm actually using Fedora 13 but I imagine most of the commands I might need are the same.
I've attached an example.As you can see,fgl_glxgears window is under the chrome window(look at the title bars), but you can still see the gears.The same thing happens with video in VLC.I'm using 11.04. This happens with or without compiz. I'm using the latest ati video drivers from AMD's site (11.5).
Enabling visual effects to either of normal/extra result in a serious problem-scrolling down any page results in overlapping of text, which is corrected only when i minimize and maximize the window.
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
On my RHEL6 Gnome Terminal, the text is overlapping. I tried with the "Use the system fixed width font" option or changing other fonts, but they did not change. Also, I tried creating .fonts.conf file that's posted as a solution for other but this did not help.
Thing is that the first time when I installed RHEL6, it looked ok, but 2nd installation on VirtualBox client and thereafter, this happens. I'm using the same installation source and options as the 1st time. Also, "Open Terminal" option is missing from pop-up window after 2nd installation (Terminal is still available from App->System Tools; just not from popup window).
my system monitor plasma widgets for RAM and CPU suffer from overlapping textin the panel Kubuntu Lucid). I can't find an option to resize the widgets.
tell me which text editor supports multiple overlapping windows (eg like turbo C++ 1.01 IDE ? ). Currently I'm using gedit and find that I cannot see two or more files at the same time
I'm faced with standing up an open source NMS and am deep into Zenoss Core. I'm evaluating distributed collectors that will be deployed behind a customer NAT/Firewall. Cool, this works. What if the customer IP space overlaps with an existing customer IP space? From a management perspective Zenoss distinguishes devices by IP. So it will refuse to add duplicate addresses. To get multi-realm IP functionality, It would require purchasing a subscription to enterprise license.
So my pickle, do I spend weeks or months hacking the Zenoss sub structure to duplicate that? Do I somehow remap the IPs through site to site VPN at the router? Or do I look for a different open source solution?Does anyone know of an open source NMS solution that addresses overlapping IP space and can do distributed collectors? I have posted a question on Zabbix forums asking if the distributed monitoring they have will do this. But I hope that someone else has tackled this and succeeded.
