I would like to install Ubuntu on an HP Laptop, but they have taken up the whole disk with 4 partitions. I have removed Linux partitions and made an extended one in it's place creating new UUIDs before, but i am worried that windows will not recognize the new partition.
View 9 RepliesI'm setting up a new Dell as dual boot. I'm leaning toward first partition for Windows 7, a second partition that can be accessed from either OS, and an extended partition that will have root, swap, /home, etc. For the partition to be accessible to both, what is the preferred format? I've read that FAT32 or NTFS will suffice. ext4 is what I understand should be set for the linux partitions. For the linux partitions, is there an advantage to setting one or two of the partitions as primary, rather than logical? Also, any clear advantages or disadvantages to having a /boot partition? It is likely I'll only have installed one version of Ubuntu at a time.
View 9 Replies View RelatedI am editing this post to save people time and effort. This is one of those "Pilot Error" issues or faulty readout issue, not sure which. It turns out that when I saved a document in PDF format to my NTFS Drive (the one I want to share between Windows XP and Ubuntu 10) the .PDF file extension was missing.
1. Ubuntu identified the files as a PDF document (even though the file extension was not there)
2. When trying to access it by double clicking it, the message was "Unable to open document, Permission Denied"
The problem was not permissions, and it was not a PDF file according to the default Document Viewer, but it WAS a PDF file according to the directory listing. The permissions message really had nothing to do with the problem, and identifying the file as a PDF document when it didn't have an extension, was another problem. What SHOULD have happened is a file without an extension should not be identified as a PDF file or If Ubuntu says it's a PDF file, and I double click it, why is the message "Permission Denied" ?? How about "No File Extension" or something like that?
Read the following if you want to see what my problem WAS before I just appended ,PDF to the filename, and now it works fine. On the positive side, installing XP first, then setting aside a large chunk of space for a shared NTFS drive, and THEN installing Ubuntu in the free space works fine. I installed a new 320 GB drive on laptop. Installed Win XP in 32 GB Set aside 250 GB for another Windows partition using MANAGE and formatted D: as an NTFS drive Then successfully Installed ubuntu 10 into remaining unused space. Problem: Ubuntu cannot access files from D: (NTFS Windows) partition. but it can WRITE files without problems, and create directories, just not read them. Have set properties of the Windows drive to shared, still nada. Any trick I'm missing? If I plug in an external USB drive, Ubuntu can read/write to it easily, it just can't read from the 250 GB partition formatted in Windows XP that I wanted to share between operating systems.
I have Windows 10 and Deb 8 dual boot, and I need to re-install Windows but want to avoid (or at least plan for) losing Grub/Linux boot.
Last time I re-installed Windows after Linux I ended up having to re-install Linux again afterwards as well, because I couldn't recover it (seemingly due to complications from encryption). So this time I'm wanting to plan and avoid that.
CURRENT DISK PARTITIONS:
Code: Select allsda1 | 550M | EFI System
sda2 | 128M | Microsoft reserved
sda3 | 175.8G | Microsoft basic data
sda4 | 286M | Linux filesystem (Boot)
sda5 | 28.2G | Linux filesystem (Root)
sda6 | 91.3G | Linux filesystem (Home)
sda7 | 1.9G | Linux swap
[Code] ....
As there is a "Microsoft Reserved" partition and a separate Microsoft directory within the EFI partition, if I just go ahead and reinstall Windows will it install it's boot loader/image to one of it's own partitions? And NOT affect anything else like Grub and other Linux things?
Logic tells me yes, but there seems to be many issues on the internet about installing Windows after Linux.
My primary concern is whatever happens with Windows or anything to do with dual loading etc, is that Linux will still just boot, or I can get it working again without much hassle.
Why is there a reserved Microsoft partition AND a Microsoft directory in the EFI partition? Which one boots Windows?
Why is there a separate Linux Boot partition AND a Linux directory in the EFI partition? Which one boots Linux? Where is Grub invoked from, is one redundant, etc?
How these work. It is possible I've set them up wrong, or with redundant partitions, but both systems have been booting ok for months.
I would like to combine my Linux partition (/sda3) and /sad1 to give me more disc space. I would also like to combine the two unallocated partitions to install a Windows 7 dual-boot with Ubuntu. How would I do that without totally raping my current Ubuntu install?
View 1 Replies View RelatedI just successfully installed ubuntu 10.10 Meerkat Maverik parallel to manufacturer installed Windows 7 Professional on a newly bought ThinkPad t410. All works find just that on the boot screen instead of 1 Windows partition (usually something like "Windows 7 loader on sda1") I find two Windows partitions. Now, I know that Thinkpads have a recovery partition. Funny is though that both "Windows 7 loader on sda1/2" login to what seems the identical Windows (not one of them the "normal" and the other some form of a recovery).
View 1 Replies View RelatedI am running a dual boot with XP and Ubuntu - what I want to do is increase the partition size of Ubuntu and reduce XP. When I run " G Parted" it shows both partitions with Xp being NTFS. I guess the boot loader is Grub because Ubuntu takes priority at Boot. I cannot persuade G Parted to allow me to resize the two different partitions. I am using the G Parted Live CD.
View 1 Replies View RelatedI have a Centos 5.5 system that had 2 primary partitions (2nd is setup as LVM with multiple LVM partitions) and then installed Windows 7 as Dual Boot.
However, Windows 7 has installed a 200MB system partition which is GPT/EFI as partition 3 and the Win7 OS as a Primary Partition.
I have a heap of space undefined after this fourth primary partition.
However, as 4 primary partitions have been used, I can no longer create an extended partition to utilise this.
As such I would like to know what is the best and safest way to proceed, and if possible step by steps instructions for the best option eg:
1. Delete the Windows 7 System Partition and create the extended partition (I expect this will prevent Windows from booting)
2. Use something like partition magic to change the Win 7 OS Partition 4 to an extended partition (Not sure if this will work)
3. Make changes to the overall system including both Linux and Windows so that it will use GPT only (I have
had no experience with GPT so this is a bit scary)
4. Other?
I have a dual boot system 9.10 and XP. The hard drive is 234. For some reason during the install I only allocated 128 to windows and 16 to ubuntu. Or at least, gparted tells me I have 127.99 NTFS and 104 unallocated (=231G ??).
System monitor tells me I have the following:
/dev/loop0 is ext4 = 16 G total
/dec/sda1 is host = 128 G total
this is 134G total
From windows, the partitioner tells me the same. I have 104 of unallocated disk space and 128 of NTFS. I assume the 16G allocated to ubuntu is inside the 128G?. How do I get that additional 104 into ubuntu without screwing up the MFT of windows. Or can I? Is it as simple as telling gparted to format the space? or will that mess windows up?
So I wanted to dual boot Ubuntu with Windows 7, but have no idea how to partition out Ubuntu. At the moment, I'm working with a 300GB harddrive that will solely hold installed applications and stuff like that. Any shared/storage data will be put on separate harddrives altogether.
I plan on using a 40-50GB partition for Windows 7 alone (no installed applications and stuff). And here come the questions about Ubuntu partitioning. From what I read, do I only need three separate partitions? (/, /home, /swap) Even then I'm not 100% sure what each of these partitions represent. But my research says... / = equivalent to my Windows 7 partition, /home = the partition where installed applications go and other non-essential Ubuntu stuff, /swap = virtual memory
With all that said, to comfortably run Ubuntu can I have my partitions be these sizes?
/ = 10GB
/home = 20-30GB
/swap = 2GB (Do I even need this if I have 2GB of ram?)
Windows 7 = 40-50GB
W7 Apps = remaining space
I don't know what exactly I want to do with Ubuntu, but is a /home of 20-30GB adequate to install lot's and lot's of apps?
I'd like to dual-boot it with Windows 7, but I'm not sure exactly how I should set things up. Searching has helped but I would really appreciate advice specific to my scenario. Windows 7 to run a couple games (mainly Starcraft II) and for anything that doesn't run on mac or linux, and Ubuntu to do most of my normal everyday stuff (documents, programming projects, web browsing, listening to music).Hardware: 1TB hard drive, 4GB RAM, AMD Athlon II 435 processor.
View 2 Replies View RelatedI would like to install Ubuntu in a separate partition. I currently have Windows XP on the C drive.
I have the following config on my Presario Laptop:
60gb SATA hard drive
41.6gb available
3% fragmented
I would like to partition the hard drive to install Ubuntu as a dual boot. how I need to do this or point me in the right direction? I did begin an install from a cd I burned from ISO. I started by just going for the auto installation and what it recommended. However, when I tried to install, I got an error message that changes were uable to be written to disk and had to abort??
Assuming I can get past the error I would like to know how to create the partitions for root, home and swap and how much space for each.
I'm completely new to Ubuntu, and haven't actually installed it yet, so my questions aren't concerned about how I use it, but rather the problems of installment and more importantly how to get started. The first thing I got a little question for is how to split my HDD into two partitions in order to install Ubuntu, as I will be dual-booting it with Windows 7. The second thing I want to ask about is how big the risk of corrupting my HDD is when installing Ubuntu, and whether I can take some precautions in order to reduce the risk of said thing. The third thing I'm gonna ask about is how to get drivers for my graphics and that alike. And fourth and last: Is it going to make a difference that I'm running it on a laptop?
View 9 Replies View Relatedi'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.
the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.
Partition limit is 4 on my Inspiron 1525 so even with the space available I cannot create a Fedora partition because:
50MB for Dell Diagnostics
**GB main vista partition
10GB recovery partition
2.5GB MediaDirect partition
I'm trying to dual boot vista/fedora. I know I can delete the MediaDirect partition but that causes boot problems if the button is pressed while the power is off. I'm not sure which of the 3 Dell Partitions to remove.
i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.
i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .
Hardware: Toshiba NB200 with Atom 280 & 2GB, 160 GB HD Everything works great except the boot time. My default boot is F11 & when the system starts in "yuk" Windows it only takes a few seconds! but when I start in F11 it takes 15 - 20 minutes for it to start. No error messages, nothing in dmesg, standard configuration. The same system with Win XP & F10 worked fine?
View 4 Replies View RelatedI had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
[URL](where loading into Windows corrupts the MBR). None of the solutions in the bug thread work for me, however--I'm on a Dell system (so it's not HP tools) and I'm not running PC Angel or any similar service (I checked). I assume it is related to the Dell recovery partition, though my old laptop from Dell didn't have this problem even though it also had a recovery partition.
However, before I had partitioned and set up Ubuntu on my new laptop, I installed Wubi (for transferring over the files from my old laptop because I didn't have time to do a full install and deal with problems like this one). Wubi worked fine using the Windows Boot Loader. I understand that WBL isn't capable of loading Linux on its own, which is why I was wondering if it was possible to have GRUB installed on a separate boot partition (not the MBR) and loaded from Windows Boot Loader. All of the information I could find on it didn't work with Windows 7--but again, I know Wubi was capable of doing it. how to set this configuration up?
I played a bit with partitions. I'm not an experienced Ubuntu user, neither I have solid understanding of partitioning. And I hardly remember exact actions that led to this problem. I remember that I saw a warning in GParted that said that the partition was out of bounds or something.. But I followed some solution that I found on ubuntuforums and used fdisk to fix that. So, after installation of Ubuntu I couldn't boot into WindowsXP (after choosing Windows entry in grub2 menu I see only blinking cursor on black screen). But what's more important that I can easily mount Windows partition from Ubuntu. Also I tried to boot from Windows repair console and used FIXBOOT command, and copied[url].... and [url].... files to no avail..Here is the summary of what I got now:
Code:
sudo fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders[code].....
i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
[Code]...
when i install fedora 11 after windows 7 ,i can not partition and takes errors,it is of primary partitions that is about 77GB that windows 7 had installed on it ,but when i install ubuntu ,it can be installled without any error ,when i asked for this one said me that ubuntu has grub installer that reference to another where for primary partition ,
View 1 Replies View RelatedI just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
For the past 4 days Ive been trying to install ubuntu 10.10 64bit with no success. I am a total newbee when it comes to linux so I will be needing your kind help with it.At first I installed ubuntu to one of my portable drives with no problems, but now I want to install it to my hard drive and have a dual boot between windows XP and Ubuntu.
When I arrive to the manual partitioning part is where I get lost. I have totally destroyed my windows installation 5 times already ( thank god for norton ghost for restoring my windows installation. )
I have read several articles and blog posts regarding a dual boot system with windows and Ubuntu but none of them cover my specific situation so I keep getting lost and screwing things up.
[Code]...
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View Related