I just installed Banshee 1.7, now I get this error when I check for updates. It doesn't look like it's affiliated with Banshee but I can't figure out what it's for.
Could not download all repository indexes: Failed to fetch [URL] 404 Not Found
Some index files failed to download, they have been ignored, or old ones used instead.
I have Update Manager set to check for updates daily, to 'only notify about available updates', and have 'important security' and 'Recommended' updates turned on.Since upgrading to 10.04, Update Manager never starts up to tell me that there are updates available. If I run it manually and click on 'Check', I have to type my password in and then it will show that I have updates to install (if there are some of course).
I realise that I shouldn't get a notification icon any more, and that update manager should open instead.Anyone know whether this is something I can fix, or if it's a bug or a problem with the update server that I can't do anything about other than wait?
I am trying to install the VLC which wanted me to have universe (which I don't know what it is). This is what I tried (Tips from this forum):
kholofelo@kholofelo-Compaq-Presario-CQ60-Notebook-PC:~$ %sudo apt-get update
bash: fg: %sudo: no such job
kholofelo@kholofelo-Compaq-Presario-CQ60-Notebook-PC:~$ sudo apt-get update
[sudo] password for kholofelo: Err URL
Could not connect to archive.canonical.com:80 (91.189.88.33). - connect (110: Connection timed out) Err URL
Unable to connect to archive.canonical.com:http: URL ....
I have openSUSE 11.4 and added repro for Thumbleweed to the basic repro's.As told me I had to do a zypper dup ones for the Thumbleweed-repro to bring system up to date.
1) In KDE I do not see an update-icon in the system-tray anymore: 11.3 had one.Does this mean the auto-update function is disabled?
2) About "levels' of repro's: they are all 99, should Thumbleweed in my case be more important: say 75 ( at least <99 ) ?
3) When I use zypper up I have apps that wants updates and some are "hold back" Is this related to repro's that do refresh but not install ?
4) Someone told me NEVER mesh around with zypper DUP, so he means ONLY use zypper UP.
I would like to know if there's a way of checking which program has new updates without internet connection?
Maybe like having a program to grab the currently available programs from a repo?
I changed my internet source from wireless to wired cable which came with a new IP address. Subsequently anytime I try checking for updates from the update manager it still refers me to my old IP address for wireless and here is the results I get:
[Code].....
Im getting this error when i run the update manager, (i recently installed some software for the Logitech wireless mouse and keyboard):
Quote:
E: g15daemon: subprocess installed post-installation script returned error exit status 1
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...u4.1_amd64.deb Connection failed [IP: 91.189.88.37 80]
[Code].....
I installed 10.04 and did the upgrades. After that I installed a few programs.Now when I try to install or uninstall something from synaptic it gives me this error at the end:
Code:
E: packagekit-backend-apt: subprocess installed post-installation script returned error exit status 2
I'm clueless as how to fix this. Can someone help me understand?
fglrx error - Can't install new updates
View 2 Replies View RelatedToday I opened upgrade manager and found some updates grayed out. I could not click them so I went to synaptic to try and install them and got this error:
Code:
ffmpeg:
Depends: libavcodec52 but it is not going to be installed or
libavcodec-extra-52 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed
Depends: libavdevice52 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libavdevice-extra-52 but it is not going to be installed
Depends: libavfilter0 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libavfilter-extra-0 but it is not going to be installed
Depends: libavformat52 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libavformat-extra-52 but it is not going to be installed
Depends: libavutil49 but it is not going to be installed or
libavutil-extra-49 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed
Depends: libpostproc51 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libpostproc-extra-51 but it is not going to be installed
Depends: libswscale0 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libswscale-extra-0 but it is not going to be installed
I am running ubuntu 10.04.
I have an old PC running 900Mhz Tbird CPU and 768Mb RAM. I also upgraded the HDD to a 60Gb. I've tried to install Gentoo, CentOS, Ubuntu, and Linux Mint and all and everyone of them stop at the line "checking hlt instructions" during the installtion. I've looked over the web and there are quite a few cases with the same problem, nonetheless the solution is not clear to me, still. I've managed to install CentOS, though, with the help of web forums, bypassing the error by typing from the Kernel "linux no-hlt" and pressing enter. Now when I rebooted the machine it keeps doing even though the install completed succesfully. I'm interested in loading CentOS to build a server since I used to run Ubuntu 8.04 on that box without any problems.
View 2 Replies View RelatedI've recently started using Ubuntu and love it! However, I was recently trying to do the ubuntu updates (equivolent to windows updates), and I got his with these errors:
E: dpkg was interrupted, you mush manually run 'sudo dpkg --configure -a' to correct the problem.
E:-cache->open()failed, please report
i'm a newbie to Fedora 12. While d/l the updates and installing I got this error. Where do I start?PS...I'm weening myself off MS so be gentle.
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
[code]....
For some reason Update Manager is not installing updates as of yesterday.I have it set to check daily and notify if updates are available. It has been working without issues for well over a year now.
Update Manager tells me updates are available and presents the list of security, recommended, and other updates. All are selected to update, but when I select Install Updates in Update Manager it returns with a Reading Package Information window overlaid on the main Update Manager window - building dependency tree then reading state information and dumps me back to the main Update Manager window without performing any update actions.
i tried running (yum update, also yum install vlc) and i get these error
Code:
Error: Package: abrt-1.0.7-1.fc12.i686 (updates-testing)
Requires: librpm.so.0
Removing: rpm-libs-4.7.1-6.fc12.i686 (@anaconda-InstallationRepo-200911081854.i386)
[code]....
I am getting some error when i compile cross compile "dbus-1.2.20".error
Code:
checking for XML_ParserCreate_MM in -lexpat... no configure: error: Could not find expat.h, check config.log for failed attempts so i downloaded te expat library sources i cross compiled. But again i am getting same error. I think i have to add "-lexpat" in LDFLAG. But i dont know how to do that.
I have noticed that Ubuntu checks the / (which includes my home folder) for errors after a certain number of boots.
But the problem is it never checks another partition (Reiserfs) which I had created during installing Ubuntu.
I keep all my data there.
Now how do I configure Ubuntu so that it checks the partition I just mentioned ?
Using a Vodafone K3806 USB modem on Ubuntu 9.10, trying to connect with Sakis3g (I already know from previous experience that VMC is out of the question), I get the following message: "Modem responded "ERROR" when checking fror SIM".
View 6 Replies View Relatednow i have installed libqt3-mt-dev this error is solve but new error is comming this is followingly i didn't understand------------->checking for KDE... configure: error:in the prefix, you've chosen, are no KDE headers installed. This will fail.So, check this please and use another prefix!
View 8 Replies View RelatedSometimes at startup I get this message "Checking disk 1 of 1". Does that mean it's checking all partitions on the hd? After a bad shutdown there is no prompt for fsck to run and the system just boots up. In fstab I have both options set to "1" for the partition Ubuntu is on, all others set to "0". Any ideas on both?
View 3 Replies View RelatedI'm new to C language and some help finding places in the following code where a system call is made and error checking is not done. I found one but since I don't know C language at all I'm not exactly sure what else to look for. Link to my file: [URL]...
I found one and added error checking:
if (setoutpipe){
//Changes: Added error checking to the system call close()
//Orginal Code: close(pidefd[1]);
if(close(pipefd[1] != 0){
fprintf(stderr, "Could not close piple.
");
exit(255);
}
I am trying to figure out how i would go about finding out where system call is made and error checking is not done. I have code below, if somebody can point me in the right direction where system call is made but error checking is not done.Quote:
#include "shell.h"
#include <stdio.h>
#include <string.h>
[code]....
When I do the routine updates, which come every few day, I get the following message.(Please see the attached image.)
View 3 Replies View RelatedI downloaded Go-OpenOffice from SlackBuilds.org, but I can't build it. make terminates with configure error: checking for C compiler default output file name. configure: error: in `/tmp/SBo/ooo-build-3.1.1.5': configure: error: C compiler cannot create executables See `config.log' for more details.
(I can't find config.log anywhere) I use a quite 'light' installation (no xap, ap), and I suspect that I have some unmet dependencies, but the error message provides no information about what software is needed (I've installed all dependencies listed on SlackBuilds.org). I'm using Slackware64-13 with Xfce
I have created a shell script to customise mv command, now i have achieved to accomplish all the functionality of mv by using alias. But i found difficulty in accomplish the funcionality with options [Like mv -i or mv -f etc.]. I thought about logic which check the first argument whether its starting with a minus [-] or not. if its starting with argument it will set a flag and execute accordingly. But whenever this condition is checked it shell script will throw error of destination operand missing. But the same will work with out option.
Note: I have used an minus[-] expression for decreasing a counter on the script above. The below mentioned is the portion of script. Sry for troubling Im not gud @scripting.
for i in $*
do
{
argument=`expr $argument - 1`
if [ $argument = 0 ];
then
exit
[Code]....
i was not able to install alsa...showing the error checking for directory with kernel source... Please install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /lib/modules/2.6.18-194.el5xen/source). my friends installed the alsa for cent os 5.4...how to rectify this...
View 3 Replies View RelatedI checked the md5sum of the iso using winMd5Sum utility, it is OK.
To check the CD, right clicked the md5sum file in it, send to winmd5sum, and then copied the corresponding hash from the ubuntuhashes page into the bottom text box, and compared. The message box says md5 sums are different. Now the question is, have I done it correctly, I mean, is this the way to check a burned CD, OR, is there another way to check md5sum of a burned CD?
After I got the OS up and running (v9.10), I was prompted to download and install some updates. The download is complete, but when I try to install the updates, I receive the following message. What should I do?
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
E: _cache->open() failed, please report.
I have been trying to fix this problem for 3 days, any ideas before I jump through the window (not the bill gates one)?I am using ubuntu 9.10 and running a ./configure.
View 3 Replies View RelatedI was having the dreaded black screen hang during install but got that figured out. Read [url] for my first problem.
Now that I've finally gotten it past the blank screen, it starts the install but then hangs while checking the PCI cards, I included a photo of where it hangs, and I don't have any PCI cards installed.
Here are the specs on my computer:
Everything is brand new, TOTALLY from scratch build.
Mainboard is a MSI NF980-G65
AMD Phenom II 6 core processor
8GB DDR 3 Ram
1 Samsung Solid state hard drive
2 Samsung 1TB HD
Samsung iHAS424 DVD/CD drive
I'm using the on-board graphics which is Nvidia GeForce 8 series