now i have installed libqt3-mt-dev this error is solve but new error is comming this is followingly i didn't understand------------->checking for KDE... configure: error:in the prefix, you've chosen, are no KDE headers installed. This will fail.So, check this please and use another prefix!
View 8 RepliesI'm running Slack 13.1 [32 bit] Re: pdfedit from SlackBuilds 13.1. I've installed qt3 per the dependencies w/installpkg. I've pointed pdfedit.SlackBuilds to where qt3 is and it's found fine. The problem arises when the build can't find docbook stylesheets. "checking for docbook xsl... configure: error: unable to find docbook.xsl stylesheet"
I've installed docbook.xsl where it can be found which is in the same folder qt3 support is found and verified my system can find it there,, which it does. I still get the can't find stylesheet error. Is this a glitch or am I overlooking something somewhere along the line?
I'm new to C language and some help finding places in the following code where a system call is made and error checking is not done. I found one but since I don't know C language at all I'm not exactly sure what else to look for. Link to my file: [URL]...
I found one and added error checking:
if (setoutpipe){
//Changes: Added error checking to the system call close()
//Orginal Code: close(pidefd[1]);
if(close(pipefd[1] != 0){
fprintf(stderr, "Could not close piple.
");
exit(255);
}
I have created a shell script to customise mv command, now i have achieved to accomplish all the functionality of mv by using alias. But i found difficulty in accomplish the funcionality with options [Like mv -i or mv -f etc.]. I thought about logic which check the first argument whether its starting with a minus [-] or not. if its starting with argument it will set a flag and execute accordingly. But whenever this condition is checked it shell script will throw error of destination operand missing. But the same will work with out option.
Note: I have used an minus[-] expression for decreasing a counter on the script above. The below mentioned is the portion of script. Sry for troubling Im not gud @scripting.
for i in $*
do
{
argument=`expr $argument - 1`
if [ $argument = 0 ];
then
exit
[Code]....
I am quite new to Linux. Just some basic information, I am using windows xp but have installed vmwork station and am running Red Hat enterprise linux 4.
When i run ./configure it gives me this error. "configure: error: libnet >=1.1.2.1 not found "
I am getting some error when i compile cross compile "dbus-1.2.20".error
Code:
checking for XML_ParserCreate_MM in -lexpat... no configure: error: Could not find expat.h, check config.log for failed attempts so i downloaded te expat library sources i cross compiled. But again i am getting same error. I think i have to add "-lexpat" in LDFLAG. But i dont know how to do that.
I have noticed that Ubuntu checks the / (which includes my home folder) for errors after a certain number of boots.
But the problem is it never checks another partition (Reiserfs) which I had created during installing Ubuntu.
I keep all my data there.
Now how do I configure Ubuntu so that it checks the partition I just mentioned ?
I just installed Banshee 1.7, now I get this error when I check for updates. It doesn't look like it's affiliated with Banshee but I can't figure out what it's for.
Could not download all repository indexes: Failed to fetch [URL] 404 Not Found
Some index files failed to download, they have been ignored, or old ones used instead.
I am trying to figure out how i would go about finding out where system call is made and error checking is not done. I have code below, if somebody can point me in the right direction where system call is made but error checking is not done.Quote:
#include "shell.h"
#include <stdio.h>
#include <string.h>
[code]....
I have mandriva 2007 install on my desktop. I tried to update to grub2. When I run the ./configure I got the following error message.
This script, last modified 2009-06-10, has failed to recognize the operating system you are using. It is advised that you download the most up to date version of the config scripts from [url]and [url]
If the version you run (./config.guess) is already up to date, please send the following data and any information you think might be pertinent to <config-patches@gnu.org> in order to provide the needed information to handle your system.
Using a Vodafone K3806 USB modem on Ubuntu 9.10, trying to connect with Sakis3g (I already know from previous experience that VMC is out of the question), I get the following message: "Modem responded "ERROR" when checking fror SIM".
View 6 Replies View RelatedSometimes at startup I get this message "Checking disk 1 of 1". Does that mean it's checking all partitions on the hd? After a bad shutdown there is no prompt for fsck to run and the system just boots up. In fstab I have both options set to "1" for the partition Ubuntu is on, all others set to "0". Any ideas on both?
View 3 Replies View RelatedWhen I am compiling from the src, I run the ./configure script. While there might be error sometimes, I 'd like to ask, what're the 3 stars( ***) in front of the msg stand for? Do they stand for critical errors?
View 9 Replies View RelatedI'm trying to install Wireshark but I have this message :
"configure: error: Header file pcap.h not found; if you installed libpcap from source, did you also do "make install-incl", and if you installed a binary package of libpcap, is there also a developer's package of libpcap and did you also install that package?"
I tried to use #yum -y install wireshark but didn't work.
i am trying to configure below commands and it through error some one can advise where to check and how to fix this issue
[root@2rem .vnc]# vncserver :1 -name 2rem -depth 16 -geomatry 800x600
You will require a password to access your desktops.
Password:
Verify:
xauth: creating new authority file /root/.Xauthority
Unable to start Xvnc, exiting
I downloaded Go-OpenOffice from SlackBuilds.org, but I can't build it. make terminates with configure error: checking for C compiler default output file name. configure: error: in `/tmp/SBo/ooo-build-3.1.1.5': configure: error: C compiler cannot create executables See `config.log' for more details.
(I can't find config.log anywhere) I use a quite 'light' installation (no xap, ap), and I suspect that I have some unmet dependencies, but the error message provides no information about what software is needed (I've installed all dependencies listed on SlackBuilds.org). I'm using Slackware64-13 with Xfce
checking whether time.h and sys/time.h may both be included... yes
checking for long double... yes
checking for hrtime_t... no
checking size of int... 0
checking size of unsigned int... 0
[code]....
How can I configure apache2 to show the error message in the browser? Just for the purposes of debugging, I do not want to have to open the server error log every time.
View 1 Replies View Relatedthis is my first post i have this error in ./configure for bind 9.7.3: checking for OpenSSL library... using OpenSSL from /usr/lib and /usr/includechecking whether linking with OpenSSL works... yeschecking whether linking with OpenSSL requires -ldl... unknown configure: error: OpenSSL has unsupported dynamic loading
View 1 Replies View RelatedI tried to install lame on Linux, but I failed running ./configure.
View 9 Replies View Relatedmysql -u root -p but unable to create any database.
if i tried to configure it's giving error ERROR 1006 (HYOOO) : can't create database 'test' (error: 2)
my location for database is /var/lib/mysql and permissions are
drwxrwxrwx mysql root.....
i was not able to install alsa...showing the error checking for directory with kernel source... Please install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /lib/modules/2.6.18-194.el5xen/source). my friends installed the alsa for cent os 5.4...how to rectify this...
View 3 Replies View RelatedI am configuring my Apache Server to enable checking CA Revocation List, and my Configuration lists as following :
Code:
SSLCARevocationFile /etc/httpd/confi.d/ssl.crt/CRL1.crl
But the server can not start, and the log says:
Code:
Unable to configure X.509 Storage for certificate
If I try this command to view content of my CRL file :
Code:
openssl crl -text -in CRL1.crl -noout
the console shows :
Code:
error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib:647:Expecting: X509 CRL
I think there is something wrong with my CRL file, such as the file format.Is there any requirement to the CRL file? What can I do to enable this CRL file checking?
I downloaded and run sakis3g and I get this results /sakis3g modem responded "ERROR" while checking for pin
View 2 Replies View RelatedI have an old PC running 900Mhz Tbird CPU and 768Mb RAM. I also upgraded the HDD to a 60Gb. I've tried to install Gentoo, CentOS, Ubuntu, and Linux Mint and all and everyone of them stop at the line "checking hlt instructions" during the installtion. I've looked over the web and there are quite a few cases with the same problem, nonetheless the solution is not clear to me, still. I've managed to install CentOS, though, with the help of web forums, bypassing the error by typing from the Kernel "linux no-hlt" and pressing enter. Now when I rebooted the machine it keeps doing even though the install completed succesfully. I'm interested in loading CentOS to build a server since I used to run Ubuntu 8.04 on that box without any problems.
View 2 Replies View RelatedI'm having trouble installing visual python, I've downloaded the source package from [URL] as I couldn't find it on yast. On calling ./configure most tests are passed but I get an error which says I need gtkglextmm 1.2 checking in Yast I see this is already installed. Looking in the install.txt it talks about this error and suggests renaming some files, I'm not keen to do this for fear of breaking something else but as it turns out they are already named what they need to be anyway.? Now I'm truly stumped.
View 4 Replies View RelatedCode:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
I chose Mint 8 Fluxbox and have the iso. I cannot figure out how to check the iso for errors and the MD5 signature.I'm using Windohs XP so I tried to install MD5sum.exe. When I double click on it to run it all it does is flash and then nothing.When I type in the commands it says it can't find it or it can't read it or something.I may be typing the commands incorrectly. I'm just not understanding.I need to check the iso for errors but can't understand how to check it.
View 5 Replies View RelatedI'm trying to determine if IE is viewing my web page with the following HTML code:
Code:
But I don't see anything except "Test for IE". It is like the tests are being treated as comments? Do I need to turn something on in the server?
when trying to install a tarball i am getting the following error when configuring:
configure: error: in `/home/server/tazzed/mkahawa-printer-0.0.1':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check