Yesterday i upgraded to the latest version, but after restart it froze on the splash screen, giving me a colorful collection of pixel-blocks full-screen...
Rebooted, chose recovery-mode and got this error-message:
(EE) open dev/Fb0: no such file or device
(EE)Radeon(0): [dr] RadeonDriGet version failed to open DRM
I am a total noob, and have installed Xubuntu as a sort of dual-boot backup on my winXP machine.
I've never used Ubuntu before and I was having some trouble booting. I've tried both installing with Wubi and also the full installation, but using either method I get the same result:
After selecting Ubuntu on the boot menu it says its finishing installing and then my laptop precedes to practically "shut off." The screen goes blank and the light on my optical mouse goes off. Only the fan runs and it begins to go very quickly. At one point I even left it on for several hours like this to make sure I wasn't being too impatient, but nothing happened.
Currently I have a Toshiba Satellite A505-S6033 with an i7 processor and 4GB of ram. I also only have one hard drive which may have complicated my problem.
I've had a lot of success over the past year with Ubuntu 10.4; however, recently I've been experiencing nothing but problems. It all started with an upgrade a month ago that caused me to experience a boot error. Now every time I re-install the system, I will have a random boot error. I have been trying to install the system on a friend's computer and getting the same thing. I've tried a different download and burned different discs, but I am still experiencing problems with the system having a boot error. Sometimes it is immediate after installation and other times it might boot fine for a day or two and then suddenly it will no longer boot. Is there some kind of bug with 10.4 now? I never, never had this hard of a time with Ubuntu. I've installed it on several computers for myself and other people.
View 1 Replies View RelatedI'm trying to dual boot 9.10 with Vista on an HP Pavilion Slimline (AMD64). I've tried both booting from a disk and using Wubi, and neither has worked. Booting from the disk takes me through the screen where I can choose to try Ubuntu without installing, but after selecting that, the desktop didn't load, the screen just went to black.
I decided to try Wubi, and it went well enough. Everything in windows worked, and upon rebooting, it was able to finish checking the installation. After one more reboot, I selected Ubuntu from the Windows boot manager, and then the grub command prompt appears. I can't seem do anything after that except reboot.
I have no idea what's going on with this computer.
Cant boot windows or ubuntu
Well i have two hard drives, i used wubi on windows (which is on my c: drive) to put ubuntu 10.10 on my d: drive. Everything was running smoothly until the update manager uptated ubuntu. When the installation was completed, i was told to restart. So i did. When it restarted, nothing happened. My computer froze and i cant access windows or ubuntu, and i cant change anything.
I have downgraded from Ubuntu 10.10 to Ubuntu 10.04. I've had some bumps along the way and finally was able to install 10.04 successfully. Right now, my computer will not boot from the HDD and will only boot from the USB drive that the LiveCD is on. When I reorganize to set HDD as primary boot, i get:
id-laptop login:
id-laptop password:
and I can put that in but then it just gives me a command line that says"id@id-laptop:~$
How do I get it to boot from the HDD instead of from the USB without running into this problem?
If I resequence the boot to HDD as number two, it will juts go into the LiveCD mode. Am I supposed to reinstall 10.04 again? I know 10.04 was successfully installed because it said it was and it needed to restart so i hit the restart button. It also had my old desktop picture there and all my files AND i checked the system info before restarting (it confirmed that lucid lynx was running).
I recently installed Ubuntu 10.10 on my laptop and it was running all smoothly, but all of a sudden when i booted, the only thing i could see were the desktop wallpaper and mouse icon, no panels, no shortcuts, nothing, meaning i can do pretty much nothing, i can move the mouse but can't click anything, the last thing i did was download and goof around with compiz and i was too happy because it worked and looked really great, even though i didn't want to activate restricted drivers for my ATI video chipset, but again, it was working cool and then boom, only wallpaper and mouse, nothing more
Laptop Sony VPCEE27FL AMD Athlon II 2.1 ghz (64) 4gb RAM
I've just updated my desktop to F13 using preupgrade but now grub won't boot it. The upgrade seemed to go OK, and none of the disk partitions should have changed as far as I'm aware, but now I get an error
VFS: Cannot open root device "UUID=xxx" or unknown block(0,0).
I'm new to these forums. I'm coming from using Ubuntu for a couple of years and now I'm trying to switch to Fedora.
I installed F10 yesterday and all went well, more or less. The system used to freeze randomly but after updating, everything seemed to work fine (I haven't tried audio yet, though).
I have an X1250 integrated graphics system that's working fine in Ubuntu. After playing around with F10 for a while I decided to download and install the latest ATI drivers from AMD's site. The installation posed no problems, but when I reboot the system it will come to a black screen at some point and freeze there.
I searched the web a little and came to this: http://www.fedorafaq.org/#radeon, but I'm not sure if that's current or old news. If it's current and those ATI drivers can't be installed, I'd appreciate some help about removing them.
I have recently updated my Fedora 11 installation which replaced my older 167 kernel with the newer 217 kernel. However, the 217 kernel will not boot completely. It will show the splash loading screen, and then will switch to a rapidly blinking cursor. This cursor blinks for about 5 seconds and then disappears. I can access terminals using ALT+F2, etc. I can log in to these terminals, but init commands do not complete (something about a binary handler). I'm not sure if something is conflicting with an update to X or what is wrong. The most recent kernel that I managed to get to work was Kernel 167, however I cannot find this kernel for download.
Sys info:
AMD Athlon 64 X2 4800+
3GB RAM
nVidia GeForce 8600GT with proprietary drivers
320GB Hard Disk with windows and linux partitions
Fedora 11 32-bit i586
I am a linux newbie.
I had dual boot fedora 9 with windows XP before. Now I decided to change to fedora 11. I choose the option Replace existing linux while installing the fedora 11. My windows used to be in C drive while my linus in D drive. So I thought it would replace the D drive and remain dual boot.
However, after I reboot the computer, I realize that it can only boot linux. My windows partition appear as a File System in linux. code...
I have intel motherboard(d102ggc2) and 4Gb flash drive.
I've created live USB using usb-creator-gtk(ubuntu 10.04)
There is no option "all fixed disks" in BIOS settings
(http://ubuntuforums.org/showthread.php?t=1616610)
Drive is formatted into FAT32 using GParted
(http://ubuntuforums.org/showthread.php?t=1167803)
Target
I'm tying to install ubuntu 10.10 or 10.04
Problem
I get "Boot error" when booting using live USB.
There are only two words(please let me know if i can get any other logs).
Issue is not reproducible on other env(hp625 and other desktop).
I have been using 8.04 for a year & it's been wonderful. Recently I saw the invitation on 'update manager' to upgrade to 10.04 & went ahead wih the download, but when the system tried to reboot the problems started &, I see from the forums, this seems to be a widespread problem. You get as far as UBUNTU & 5 dots then nothing. I have read as much as I can, understood a little but got nowhere so I thought I'd recover my files (hopefully) with the 8.04 CD using photorec & then reinstall my 8.04. Problem is the CD will not boot. I've used 'help' & installed the boot helper but I get the BusyBox message and don't know what command to put in.
View 9 Replies View RelatedI have been using Ubuntu for many years.
I bought a new hard drive (has not arrived yet) and getting ready to install it when it arrives.
My computer/workstation has a number of hard drives installed inside that are all SATA drives.
The boot drive (Ubuntu only, I do not use Windows) is a 500GB USB notebook drive installed in an external case.
I have an 80GB internal drive with an old Ubuntu install. I decided to remove that drive (pulled the drive) to make room for the new drive.
But the new drive did not come in the mail, so I put the computer back together without the old 80GB drive (SATA 0).
To my surprise it would not boot to the 500GB USB drive?
Black screen with the blinking dash...
Removed every drive but the USB 500GB drive and the CD from the BIOS boot menu. Made the USB THE drive to boot to.
Black screen with the blinking dash...
Using a 10.10 LiveCD I can access that 500GB drive.
Thus, it is hooked up and works but does not boot. Gparted says there is a BOOT FLAG in the Linux partition of the 500GB drive.
My only conclusion was I altered the boot order for GRUB so I put the 80GB drive back in the computer.
I did not edit GRUB in any way, I simply physically pulled the drive when the computer was off.
Black screen with the blinking dash... code...
I have a laptop with Windows 7 and Ubuntu installed in seperate partitions. When I boot up the computer I get options to boot either in windows 7 or Ubuntu. Yesterday I updated Ubuntu to 10.4 version. I have been having issues with grub rescue, which was rectified an hour ago. Now I can boot up into windows 7, but when I try to boot into Ubuntu, I get a GRUB screen as below code...
View 1 Replies View RelatedI beseech you, esteemed fellow denizens of the linux forums, to help me with the following minor tangle.
I enter this from the enchanting Ubuntu 11.04, which I installed some time ago. It loads up happily from the top of my grub 1.99 menu.
The grub menu had the following entries:
Linux ...
Linux-Recovery ...
memtest86 ...
Windows XP ...
Windows XP Recovery ...
Windows XP Recovery ...
All of these menu options loaded their kernels correctly from the grub menu.
Well, all but one. My former operating system, Windows XP, would not load with its familiar majestic turpitude.
No. In fact, when I finally needed XP, I selected its menu option in grub 2, and the menu disappeared.
In its place, a single, blinking caret appeared. Just blinking, and blinking. Taunting me. Threatening me with the prospect that it might take away my pirated starcraft games forever. Windows had run perfectly before.
After installing Ubuntu on a hardrive that already had XP on it, when I get to the part where I choose what OS to boot, and I select XP, all I see is the Windows loading screen for about 3 seconds, then the pc shuts down and restarts itself, and goes back to the OS options code...
View 5 Replies View RelatedI have just installed Windows 7 to my laptop; here are the specifications code...
And then, it just holds there. I've also tried 'root (hd0,0)'
On the plus side, Ubuntu 9.04 is unaffected once I had Knoppix 6.02 LiveCD correct the boot manager, so it can boot Ubuntu.
I have an Acer Aspire 5810T which came with Windows Vista. I prefer Ubuntu but I need some windows applications so I dual-booted Vista and 9.10.
There was a few minor problems with the Vista side but I didn't use it enough to care. A few weeks ago Vista would not open some programs and others would shut down automaticly and some would open but not connect to the internet like they should. This happened on my previous laptop and when I used the system recovery discs to restore the computer all those issues were gone.
I used the recover discs to restore everything to its original factory settings, it said everything was successful so I restarted. My computer got to the grub menu but when I chose Windows Vista as my operating system it goes black for half a second then returns to the grub menu.
I can get into Ubuntu fine, and I can see the Vista files when I mount the drive to Ubuntu. When I look at the files everything is the way it should be if I had restored it but I can't boot it..
I've just updated (through Update Manager) to the latest Linux kernel, (2.6.32-23, I believe) and now Ubuntu will not boot to the desktop.
It gets as far as finishing fsck on all of the drives, and successfully completes checks if necessary, but after that it just comes to a halt and won't proceed any further.
The last messages on screen when it freezes are (ignoring the fsck success reports):
init: ureadahead-other main process (954) terminated with status 4
init: ureadahead-other main process (959) terminated with status 4
init: ureadahead-other main process (970) terminated with status 4
These messages were appearing before, though.
The only way I seem to be able to boot now is by selecting the previous kernel (2.6.32-22) in GRUB.
Is anyone else seeing this, and does anyone know how to fix this Ubuntu update problem?
I've seen similar posts but nothing that's been able to solve my issue.
System
Linux qbit 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 11:55:36 UTC 2010 x86_64 GNU/Linux
Desktop
Gnome
Issue
Upon boot I can see the Ubuntu splash with the 6 white progress dots. No GDM or X11 session is started automatically with the progress screen simply remaining on display.
Temporary Solution
Stop GDM on vty7 and start it on vty1 or anywhere else for that matter - just not vty7 as this won't work. code...
I just updated my kernel to kernel-2.6.29.5-191.fc11.x86_64 on my x64 system, after I reboot my machine, the Fedora loading bar comes up and finishes but then no gui comes up. I attempt to issue commands at the hanging prompt that comes up but nothing happens. I can boot into my older kernel just fine but not the updated one.
What can I do?
I have recently created a KDE 4 desktop using suse studio, it boots up fine on my machine, but doesn't shutdown!!
On my mum's laptop, which I will be using it most on, (it's windoez) it won't start KDE 4 at all! I can use the console, but I wanted to impress her with the amazing GUI and Compiz. And you can't make presentations or browse the web in a console, can you?
And sudo poweroff and sudo shutdown -h now don't work either!
Running Vista and recently d/l Linux 10.04 with Vista default.
Want to make linux default but when I go to startup manager and select Linux and reboot Vista remains the default.
Having a problem, have built some VM's and importet some from JumpBox, but they will not boot from the HD. I am using files for the HDs mixture of ".img" and ".vmdk". I can boot and build from the network and CD/ISO, but after the installation completes it reboots attempts to boot from the HD and nothing happends. No error message is displayed.
Has any one come across this ?
I just recently notice that my Fedora 13 is randomly stop at boot. This is a fresh install less than a week and with all the updated kernel and software as of today. I could not get much information from /var/log/messages (only about 3 lines at the time it froze).
It froze straight after it finishes the boot sequence. I can see a mouse cursor but that's about it. The last init sequence I could see before going to X was "atd" (if that helps at all)
This install is on a single Seagate 1.5TB drive without any other drives attached to the system (I rule out if that's problem with the other hard drives)
on Gigabyte P35DS3 mobo on ICH9 port
the mobo has AHCI mode for the hard drive
I got some bad sector on the hard drive (40 sectors)
For some reason, it kept stopping when I cold boot. Once it stop and I press the reset button it normally works.
I found another forum mentioning it can be issue with the video driver. So I here's further information of my system code...
I am trying to install opensuse on an IBM 8188 desktop with a single SATA hdd. The software appears to load just fine.. standard install but when I reboot the box .. believing it should just boot from the hard drive I get the message no OS installed. I've adjusted the bios and the drive order and I have changed to install parameters for APC or APIC.... you know what I mean... doesn't matter NO JOY IN MUD VILLE.
View 9 Replies View RelatedI have a windows and a linux box running DHCP respectively. The problem is whenever my client system boots up, it fetches the dynamic IP from the windows box. What should I do in order for my Linux box to provide dynamic IP's to clients? Both servers are in a single network. connected via switch.
View 1 Replies View RelatedAs part of instructions from Slackware Installation site, I am trying to make a boot file from the ISO (10.2VER). The command given: 'dd if=[image file name] of=/dev/fd0'
Tried image file 'bare.i' and also 'pportide.i'
Error from Red Hat OS: "opening 'pportide.i' no such file, directory" Also tried 'C:>RAWRITE bare.i a:' from WinXP command line with negative result.
Slackware help site:
'http://www.slackware.com/install/bootdisk.php'
I have not seen a command w/ 2 = symbols??
Installing to stand-alone desktop, PATA IDE Controllers. (ISO was copied with process: 'image burned to disk').v
I can't boot to a choice of guis in OpenSuse 11.3
can anyone advise me on my next move? code...
