I am Quad booting my lappy with Fedora 12, Opensuse Karmic and Vista.
Grub2 is not picking Fedora even after i had done Grub update command.
I never edited Grub 2 thing and even /boot shows menu.lst.
sda6 contains opensuse and sda7 having fedora 12. Please let me know how can i edit Grub2 for fedora 12 entry code...
I am in a VMware environment, and using RHEL 5.4. I am trying to setup a PXE Kickstart installation. For this I have configured DHCP and TFTP, made a kickstart file and shared it in the network through HTTP. My problem is that somehow kickstart file (ks.cfg) is not picked by the machine in which I am installing the OS. Although, the contents of my kickstart file can be viewed over HTTP. Please see KS_Error.jpg.
[Code]....
However, I believe DHCP and TFTP is working fine as I am getting the correct IP 192.168.1.115 which I have set in /etc/dhcpd.conf. Also, my label 1 which I have set in /tftpboot/linux-install/pxelinux.cfg/default is working fine as I able to locate initrd and vmlinuz. Please see attached Image_1.jpg how to troubleshoot this. I need to paste any of my configuration files?.
i initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies View RelatedI was asked to remove the Linux partition off a computer that had a Windows XP partition as well. I used a GParted LiveCD. I thought there might be problems, so yeah, no great surprise when after the Linux removal it couldn't boot into Windows. I saw on a different thread, that one can use a LiveCD to change a few Grub settings or something, since I don't think the Windows partition itself is damaged. However, the DVD-ROM isn't picked up by the computer. I want it to boot off the LiveCD, but no success. (And I have changed the boot order, since that is how I got the GParted to work in the first place) I checked the LiveCD on another computer and it is not damaged.
View 3 Replies View Relatedlspci reports 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) 08:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) eth0 is picked up (light when I plug n the cable lights up). nothing for eth1.
other OSes on the same machine pick up both.
My /etc/network/interfaces file looks like
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
iface eth1 inet static
[Code]...
For those who are interested, I have an adsl modem and a router is connected to the modem. eth1 is a connection to the modem. eth0 to the router.
I have 2 Mounts /mnt/Movies and /media/Movies, mnt goes to a network drive that is mounted via cifs and media is also a network drive mounted via NFS. I normally keep drives in sync using rsync and have done so with these drives. But for some reason there's a bunch of files that on /media/Movies that just wont copy over to /mnt/Movies. I've tried touching the files and then running rsync with the whole file option it picks up the files need to be sync'd but they don't appear.
I've tried using cp on the missing files but the files just never appear but it does take about the right time for the prompt to come back indicating it would be copying the data. So my next idea was to use mc. I compared the 2 directories and it selects 83 files that are not in both folders, so then I tell it to copy them, and it comes back saying 'target already exists', if I overwrite or update they still don't appear. I've unmounted the shares, reboot the server and both network drives and run the network drives disk check but nothings helping. I'm trying to avoid deleting the folder and just rsyncing everything again.
OS Ubuntu 9.04
I have in /etc/profile.d/jdk.sh
Code:
But when I am typing
Code:
which java I see
Code:
Which is not set in PATH.
I recently switched to openSUSE 11.2 and updated to 11.3 almost immediately. Everything appears to be working well, with the minor exception of my wireless.I go to connect and one of two things will happen. Either it will hang in a constant loop of preparing to connect and then asking for the security key and then back to connecting. That or it will just not connect period.I'm using a dell wireless 1397 mini-card.
lspci gave me:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[code]...
The problem is this: My movie collection is growing that large that it no longer fits on the 3TB storage I have available for it in my server.therefore want to start using external disks, but as I don't want to waste electricty I want to switch this drive on only when I want to watch a movie which is on this drive. This drive will be connected to my server running Fedora 15 x64. The movies will (most likely) be played by a machine running XBMC on an Ubuntu minimal install (10.04). Currently I use NFS to create a mount on this machine to my media folder.The question: How can I best setup this external drive and shares etc so to have these movies available from my XBMC machine when I switch on the drive, but nothing crashing when the drive is off (while the XBMC machine stays on)?
View 8 Replies View RelatedFor some reason now when I left click slackware sees it sometimes (4 out of 5 times) as a double click. This is very frustrating? Here is a list of ps aux
Code:
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.1 0.0 824 276 ? Ss 12:39 0:01 init [4]
[code]...
I installed Fedora 15, which was my first real departure from Debian based Linux OSs. I absolutely love the new Gnome 3, and was able to configure F15 to work as I wanted it to. On rebooting I realized that there was no boot loader screen, that F15 just booted and didn't give me a choice as to which OS I wanted to use. Eventually I was able to configure grub to let me see the boot loader and added my old boot loader as a choice. This worked well, maybe not a perfect solution, but it worked. This weekend I installed LMDE (Linux Mint Debian Edition) to another HDD. LMDE uses grub2 and after the install F15 was not recognized.
Two questions: Is there a way for grub2 to see F15? or Can F15 be installed using grub2? I really don't mind re-installing from scratch.
I have downgraded from Ubuntu 10.10 to Ubuntu 10.04. I've had some bumps along the way and finally was able to install 10.04 successfully. Right now, my computer will not boot from the HDD and will only boot from the USB drive that the LiveCD is on. When I reorganize to set HDD as primary boot, i get:
id-laptop login:
id-laptop password:
and I can put that in but then it just gives me a command line that says"id@id-laptop:~$
How do I get it to boot from the HDD instead of from the USB without running into this problem?
If I resequence the boot to HDD as number two, it will juts go into the LiveCD mode. Am I supposed to reinstall 10.04 again? I know 10.04 was successfully installed because it said it was and it needed to restart so i hit the restart button. It also had my old desktop picture there and all my files AND i checked the system info before restarting (it confirmed that lucid lynx was running).
I have decided to dual boot again because I found a old hard drive laying around.
primary drive: sata 500 gb
ubuntu 10.4 64 bit installed with
boot
[code]...
secondary drive: 120 gb ide drive with xp installed. xp was installed first and wrote the mbr to sda1. I then installed ubuntu 10.4 and it overwrote mbr on sda with grub2. I have tried every combination of the 40_custom script for xp I have found here on the forums but to no avail. The 30_OS probe never seems to see it either. Grub 2 will not see xp. I have it in the menu from the custom_40 but it just reboots the system when I choose it. Any advice is greatly appreciated as I am ready to go back to legacy grub which only took 5 minutes to dual boot last time I did dual boot. I want to give grub2 a chance, since it supposed to be better, but I am getting frustrated.
Here is the output from the boot info script.
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
[code]....
I'm running Ubuntu 9.10 along with Windows 7. I tried installing the TOR proxy thing long back, and today when I tried downloading a package it gave me that. Now even if I try updating my system, it says:-
Code:
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/karmic/Release.gpg Could not resolve 'TOR'
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/karmic/main/i18n/Translation-en_IN.bz2 Could not resolve 'TOR'
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/karmic/restricted/i18n/Translation-en_IN.bz2 Could not resolve 'TOR'
[code]....
Yesterday i upgraded to the latest version, but after restart it froze on the splash screen, giving me a colorful collection of pixel-blocks full-screen...
Rebooted, chose recovery-mode and got this error-message:
(EE) open dev/Fb0: no such file or device
(EE)Radeon(0): [dr] RadeonDriGet version failed to open DRM
I am a total noob, and have installed Xubuntu as a sort of dual-boot backup on my winXP machine.
I've never used Ubuntu before and I was having some trouble booting. I've tried both installing with Wubi and also the full installation, but using either method I get the same result:
After selecting Ubuntu on the boot menu it says its finishing installing and then my laptop precedes to practically "shut off." The screen goes blank and the light on my optical mouse goes off. Only the fan runs and it begins to go very quickly. At one point I even left it on for several hours like this to make sure I wasn't being too impatient, but nothing happened.
Currently I have a Toshiba Satellite A505-S6033 with an i7 processor and 4GB of ram. I also only have one hard drive which may have complicated my problem.
I posted this about 3 weeks ago in the 'Desktop' forum and with no replies feel this may be a better area
I've got Karmic installed on my netbook which I understand uses Grub2 which is still a BETA version.
I still seem to have the original GRUB (legacy) within the file system, still have a menu.lst file but is appears to be showing the contents of grub.cfg at boot time.
What is happening at boot time, is GRUB Legacy handing over to GRUB2 at boot or is the an option for GRUB2 to hand over to Grub Legacy.
Here is my current setup. I have installed Windows 7 Home Premium 64-bit, Ubuntu 9.10 64-bit, and BackTrack 4 Final in that order. All operating systems are able to boot and all is working well. The only problem I'm faced with is really just an annoyance. Which is BackTrack is showing up with a "Ubuntu 8.10" entry name.
Now I did some research on this. I found out that BackTrack was based on the Ubuntu 8.10 OS so it makes sense why it would show up that way. I found several articles and topics explaining how to modify the GRUB programming files. I guess to change the entry name, but all of them don't seem fool proof to me nor the best way to go about doing things.
One thing I wasn't able to find info on is where GRUB2 actually gets these entry names from. My theory is if I can find out where GRUB gets this info from, I can simply log into the BackTrack partition and change where the "Ubuntu 8.10" entry is to "BackTrack 4" and then run the update-grub2 command within Ubuntu to update the entry names.
I installed Ubuntu 9.10 & grub2 on a Toshiba sattellite laptop last night:
- Win XP shows up in the Grub2 menu.
- When I boot Win XP, it says autock program not found, skipping autocheck, then Win XP stops booting.
- I did a little digging on the net, & found I have to unhide the NTFS partition for Win XP (hd0,1)
- Grub2 doesn't have an unhide command.
- I tried to run parttool, & got the "command not found".
I installed Fedora 12 on my second drive.
Xubuntu 9.10 is on my master drive, and I use it to install/update grub.
When I installed Fedora, I answered "NO" to installing a boot loader.
After install, I booted Xubuntu and ran update-grub, grub couldn't find (apparently) my new fedora install.
I've tried adding it to /etc/grub.d/40_custom, and when I list /boot/grub/grub.conf, it appears to have added Fedora to the bottom of the menu.
When I boot, it doesn't stop at the grub screen, indicating only one installation of linux.
Here are the pertinent file listings, can you see where I've gone wrong?
Code:
dav@dav-desktop:~$ cat /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
[Code].....
So I recently tried to install Ubuntu Lucid in the following configuration code...
The installation procedure went fine, and it said it had successfully installed GRUB2. But then, when I tried to boot up the fresh system, GRUB2 didn't even load!!
It's not giving me any GRUB errors, or giving me a 'grub recovery>' prompt, so I suspect that it really isn't even booting into GRUB.
I tried booting into the LiveCD, and installing grub to BOTH /dev/sda and /dev/sdb, but it still does not work, and I am at a loss.
Has anybody else had this problem?
Right I had to uninstall windows xp and install windows 7 to play more games! I use windows to play games and that is it. I have restored grub before and I even double checked with this guide: [URL]
I have two hard drives
sda - 320gb with windows
sdb - 100gb /home
-12 gb /
-480gb (NTFS) shared
However after reinstalling grub it still boots into windows! I will boot into windows properly then shut it down cos its coming up with windows was not shut down properly and if that doesn't work it has then been shutdown properly and I will install grub again.
I have Win 7 in my hard drive (sda) and I installed Ubuntu 10.04 in other hard disk (a usb disk), but when I try to boot my pc from the usb disk (sdb), the grub shell is displayed. No menu is displayed. When I boot Windows 7 from sda, it runs correctly. The problem it's when i wanna boot Ubuntu. I ran bootscript on the live CD and this is what I've obtained:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for /boot/grub.
[Code].....
After discovering that the "/boot" partition did not end on a cylinder boundary, I booted back up into the alternate cd, re-partitioned everything and re-installed.It worked fine after thatI can't seem to get Grub2 Installed.
View 8 Replies View RelatedAnyone know of or use this NEW boot-loader (burg)instead of grub or grub2?
View 4 Replies View RelatedGRUB2 won't boot. It hangs just after the 'Boot from CD' thing in my BIOS.I've had 1.97 working on my PC about 24 hours ago, but I decided to start afresh and go for Xubuntu 10.10.I'll post the PC specs in the morning, but in the meantime, does anyone know how to fix this?It's going to be a Xubuntu only system, and I've tried to repair the GRUB files via the Live CD and here.
View 4 Replies View Relatedi know i should look more through the forum, but i've been stuck on installing ubuntu on my computer for 3 days now, reinstalling, manual grub installing and so on, but no go. but i found a good thread on my still no fully functional ubuntu computer that explained very well for a complete linux noob how to install grub2 on ubuntu via the livecd. but since i was booting from the live cd meant that i couldn't bookmark it, and very little on this forum, as far as i can see, gets sticky, makes it very hard to find.
the basic problem is, i completly reinstalled ubuntu 10.10, and the bootloader (that i now know is named grub2) could not be installed. so i've found several guides, including the wiki, but it haven't really worked. now instead of explaining all of this over again, like all of you have probably done a million times, can you just post the most informative links here, so i can pick and choose,
So I have a really old (about 10 years) desktop PC manufactured by Packard Bell, and would like to get Lubuntu 10.10 running on it. I had previously burnt a CD with it, but boot time was incredibly slow on the machine and installation of Lubuntu crashed my system. As a result, I created a LiveUSB (as you do).
When I entered my CMOS, I discovered the BIOS on my machine isn't able to boot from USB, and I wasn't able to find a BIOS update for my AMIBIOS chip on the American Megatrends website. So I booted my GParted Live CD and created an ext4 partition at /dev/sda3, which I proceeded to install GRUB2 onto via the commands:
Code:
$ sudo su
# mkdir /mnt/grub/
# mount /dev/sda3 /mnt/grub/
# grub-isntall --no-floppy --root-directory=/mnt/grub /dev/sda
This, as planned, succeeded; I can now get into a GRUB2 prompt when my machine boots...! The only problem is, GRUB2 won't detect my USB...or any device other than my hard drive
So, is there any way I can get GRUB2 to find my USB?
P.S. The USB works fine on my laptop, which does support USB booting. I can also boot the USB on my laptop via its GRUB2 command line, using:
Code:
grub> set root='(hd1,1)'
grub> chainloader +1
grub> boot
I have recently setup Ubuntu 9.10 in my USB pendrive using LiLi USB Creator tool.
I have given persistence with 1530MB.
Now the problem is if i want to install any software from the Ubuntu Software center, it shows a message
Code...
I have no idea how can I solve this .