Ubuntu Installation :: Computer Rebooted During Upgrade - What To Do?
Dec 4, 2010
My daughter rebooted my computer while it was upgrading from Karmic to Lucid.
Now, of course, it won't reboot
"[ 0.683646]Kernel panic - not syncing: - VFS: Unable to mount root fs on unknown-block(0,0)"
I do have a very current backup of /home
I don't have a backup of any configuration files (/etc/conf and so on?)
I think that I will have to overwrite the whole installation and then restore my /home directory, which will mean tweaking all my software installations again?
Is this my best plan of action?
View 5 Replies
ADVERTISEMENT
Dec 27, 2010
While updating from 10.04 to 10.10, the PC got accidentaly rebooted. After that I am unable to start even 10.04. A small window tells that GNOME manager didnot install properly. The PC hangs after tat. How do I restore the 10.04 version without reinstalling it.
View 9 Replies
View Related
May 22, 2010
I recently had to rebuild my computer with a new HDD and decided to load the new Ubuntu 10.04 which seems to work great. I was in the middle of downloading packages from the Ubuntu Software Center when the computer decided to reboot in the middle of downloading 6 packages. I went to the Synaptic Package Manager and it said to run "sudo dpkg --configure -a Here is what I got when I did that. What do I do next to fix and continue downloading the corrupted packages?
[Code]....
View 1 Replies
View Related
Jun 1, 2010
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies
View Related
Nov 9, 2010
I was upgrading from 10.04 to 10.10 when my laptop crashed due to a HW issue not related to upgrade. But now when I start:
1) The laptop, it boots up till the point GDM log in screen is displayed without any log-in option. The system does not respond to any keyboard or mouse actions.
2) when I try to recover (recovery mode), the boot process comes til a point where it says "Console: switching to color frame buffer device 180x56"
And the prompt just stays there. It does not not drop to terminal. When I choose an older option in the grub, I do get dropped to initramfs prompt. How to restore my machine. re-instillation is not an option as I have some data I need in the home directory.
View 4 Replies
View Related
Apr 30, 2011
I upgraded the computer at work from 10.10 to 11.04 yesterday and that went okay. Some issues, but I can work them out. I thought I'd get the computer at home done yesterday too, but that failed. I'm now operating off of a USB drive. I also have Windows7 that I was able to function off of (probably have 3 hours logged on Windows in the last 4 months). Anyway, I have an AMD64 with 4 hard drives, of which we have 2 RAID settings so it's more like 2 hard drives.
[Code]....
View 9 Replies
View Related
May 24, 2011
Just wanted to upgrade my desktop computer and after the terminal shows:
Installling new version of config file /etc/apparmor.d/usr.sbin.cupsd ...cups start/running, process 7944
The display froye, mouse does not move any more, keyboard does nothing, no chance to escape into a text terminal. Nada. After rebooting the system I get a kernel panic. This is now second of two upgrades to 11.04 that failed, and I do not know how often upgrades failed previously, but rather often.
View 1 Replies
View Related
Aug 2, 2011
Last night I decided to upgrade to Natty Narwhal 11.04 from MM10.10. I tried to leave it to install overnight.
Some bright spark turned off the power supply to my computer.
I don't know exactly what stage the installation was at, but it must have been installing the upgrade at least, because I'm now locked out of my computer.
Boot up progresses until the ubuntu loading screen. At this point is says,
'Ubuntu 10.10'
The disk drive for / is not ready yet or not present Continue to wait; or press s to skip mounting or M for manual recovery.
(If I press 'S', it says something like 'cannot find /tmp folder')
I don't know if the upgrade installation was completed, but I suspect not, because the power was turned off just an hour into the installation. Also it still tries to load Ubuntu 10.10.
Anything I can do besides formatting for a fresh 11.04 install? If only to save some files?
View 4 Replies
View Related
Oct 14, 2010
I was upgrading from 10.04 to 10.10 and the computer completely froze and I restarted it thinking I would be able to restart the update where I left off (I'm new to ubuntu). However when I restart I can't get anywhere, if I boot normally the ubuntu screen comes up and then it stops with the computer name in the middle of the screen and thats it (can't do anything i can't get into shell via ctrl-alt-f1 etc..) if i use the recovery from the grub menu it loads a bunch of things then stops i can't type anything but I can switch using ctrl-alt-f1 and ctrl-alt-f7 but I don't see anything except:
under ctrl-alt-f1 the last line reads:
[2.711773] composite sync not supported
under ctrl-alt-f7: the last lines read
fsck from util-linux-ng 2.17.2
init: udevtrigger main process (421) terminated with status 1
[code]....
View 6 Replies
View Related
Feb 23, 2010
I seem to have a small problem. Since september, i hooked up an old Acer laptop (with just 560 RAM and a 16 mib graphical card) to a computer screen, a keyboard and a mouse, so that i had an extra 'computer' for my mother to use. Old people prefer bigger screens to ponder upon.
But anyways, each time i want to update or upgrade the 9.04 Ubuntu distribution, it freezes. This is quite annoying since i really want it to upgrade to 9.10, for possible faster results.
View 4 Replies
View Related
May 8, 2010
My knowledge of how Linux works is very limited. I've used it for about a year, but just doing very basic tasks (browsing the Internet, listening to music, etc).
Anyway, I upgraded to the newest edition of Ubuntu and installed the new Grub as the update seemed to recommend installing it to every partition and hard drive. I've seen that other people are now having issues from doing that as well.
I am able to boot into Linux just fine; it is working great. However, when I attempted to load Windows XP from Grub, the computer would just restart. I followed the recommendation listed here: http://ubuntu-ky.ubuntuforums.org/sh...95&postcount=3 which seemed to fix the problem for Windows 7 users. Now, all I get when I attempt to load XP is a blank screen with nothing but a blinking cursor (but hey, at least the computer isn't just automatically re-booting, that's some sort of progress...maybe...)
View 4 Replies
View Related
Jul 2, 2010
kernel upgrade to 2.6.32-23-generic after i did this ... when im using 2 vmwares, it massivesly laggs my main OSS (ubuntu) then i went back to 2.6.32-22-generic <- and all came back to normal..when im running 4 Vmwares, it still doesnt lagg my main oss
6gb ram
c2d e8200
ubuntu 10.04 64bits
View 1 Replies
View Related
Jun 20, 2011
I have Ubuntu Jaunty Jackalope running on my home PC (dual boot with Win XP) and have received notification that this will no longer be supported and I should upgrade to 11.04. I have a slow and costly internet connection at home and don't want to download the upgrade directly onto my computer there.Is it possible to download the upgrade somewhere else and burn to a CD to run in my home computer? I see I can do this for a new install but was wondering if it is possible for an upgrade?
View 2 Replies
View Related
Jun 24, 2010
I got the message "Gave up waiting for root device after I rebooted an Ubuntu 10.04 system I thought I restored by unpacking a tar.gz at the base of the directory tree I made for backup purposes.
View 1 Replies
View Related
Feb 12, 2010
Two weeks ago my computer started freezing on start up when plugged in. It was suggested to upgrade the APM. What is this and is it not updated through the package update? If not how do I upgrade it?
View 1 Replies
View Related
May 8, 2010
So I attempted to Upgrade 2 days ago from 9.10 to 10.04. I started the upgrade and left my computer alone as it said it would take several hours. When I returned to check on it, It told me the the installation had failed and it was attempting to roll back to the previous installation. Afterward I couldn't access anything on my computer. I'd click a icon and it wouldn't do anything. I manually restarted it and was greeted with a message that it couldn't boot because there was no mount specified.
Since I had backed up all my files I tried to just reinstall ubuntu. However even after I reinstalled I'm greeted with the same message.
View 1 Replies
View Related
Sep 9, 2009
I have installed Fedora 10. During installation itselt the mouse pointer is invisible. After installation, I rebooted system. Still it remains invisible. I am new user of Fedora. My mother board is Mercury PVM7 and P IV processor 3.06 GHz
View 4 Replies
View Related
Aug 4, 2011
Just curious if there is any sort of issues with Ubuntu and JBOD assignments. I had my 2 500GB hdd's as JBOD through my mobo BIOS/RAID Config and it didn't like it. It installed just fine and showed the hard drives separately. I really didn't think anything of it so I continued on.After the install completed successfully, and I rebooted the system, it came to a blank screen with a blinking cursor and wouldn't continue on. So I tried restarting a few times, no luck. Finally I was like "okay screw this, going to install with no RAID setup or JBOD setup." (had RAID issues last night. rabble rabble) Removed RAID configurations and BAM started right up..S. Semi-new to Linux/Ubuntu. Know the basics and what not, just not some of the more advanced stuff.Edit: Okay, so I restarted my computer and removed my USB drive (which I had installed Ubuntu from) and it didn't boot. So it was NOT an issue with JBOD. Guess I'll look for a resolution for that, though.
View 2 Replies
View Related
Apr 22, 2011
I use Ubuntu 10.10 on an old laptop with 1.7 GHz Pentium M processor, 1 GB RAM, and Intel 915GM graphic chip. Of course the performance is low but it is acceptable. Especially because the graphic chip has poor 3D performance I'm worried if I should upgrade to the approaching Ubuntu 11.04 and GNOME 3. What do you recommend?
Would it be an option to upgrade Ubuntu but continue to use GNOME 2? Is it recommendable to use the 2D fallback mode of GNOME 3?
View 8 Replies
View Related
May 6, 2010
My computer made it to the "Cleaning up" phase, and then overheated. Any ideas on how I might finish the process manually?
View 1 Replies
View Related
Oct 9, 2010
Last night I upgraded from 10.04 to 10.10 and now my system is bugged. If I accidentally enter the wrong credentials at login, the computer freezes - consistently. This happens at login on startup and when unlocking the screen after it goes to sleep. Additionally, my fingerprint reader which is built in and worked perfectly before the upgrade is causing the computer to freeze after a scan to login or unlock the computer. I haven't noticed any advantages to this newer "lighter" version of ubuntu so I'm not at all opposed to a complete downgrade back to 10.04.Unless someone has a straight solution to this problem - which I doubt, just let me know how I can downgrade my kernel back to a stable version that actually functions to basic standards..
P.S. I know that the upgrade deleted/turned off some "uneeded" or absolete repositories, so I went thru and reinstalled all those involved with the fingerprint scanner, and still the same results, even after a restart so..
View 1 Replies
View Related
Dec 1, 2010
I am currently using linux on my old system (store bought Gateway). I am building a new computer for Christmas. This is how I want things to go down: Set up new computer > install new hard-drive (as primary) > install (this) hard-drive (as secondary) > copy full contents from current drive to new drive > boot from new drive > Use (this) hard-drive from there on out as a backup/storage.
Will this work? Will a new mobo/processor combo mess any with my current system as a whole? I know that when I use to use gentoo everything was compiled "system specific", however, I do not believe ubuntu operates this way (well they are both goign to be a 64bit capable processor, which I think is about as specific as ubuntu gets)
Furthermore, I will be transfering my current videocard (GeForce 9800 GTX+) into the new system, so I will not need to configure any new video drivers. But what about audio? I currently use onboard audio, and will be using the new mobos audio as well.
View 9 Replies
View Related
May 4, 2010
I was put somewhat in charge of a server last semester running Ubuntu. It serves as a router and general purpose computer for a robotics lab. Yesterday, I went do dist-upgrade using the command line, and ran into a couple of bugs with gtk libraries which I fixed based on the bug reports. However, the computer decided to reboot for some reason in the middle of the upgrade and killed the running OS. I currently have it up on a Debian recovery CD. I can't get past intramfs without the CD. It is dying somewhere in rsyslog with an error about a broken pipe. I am not sure where to go from here. I will post actual error messages when I get back infront of the machine. No one knows how the machine was set up in the first place and it holds a few secrets we need to keep, so reinstall is the last option.
View 5 Replies
View Related
Jul 31, 2010
I'm running Ubuntu 10.04, and ever since last upgrade a couple of days ago (I think), everytime I hit shutdown on the gnome-panel (admittedly, I haven't tried the command line shutdown) the computer restarts itself. This computer is dual-booted with Win 7, and the shutdown command there properly halts the system.
View 3 Replies
View Related
Jul 12, 2010
Installed the minimal system ( didnt check any of the boxes when it asked me what i wanted to install.I just want a command line system to build from btw )Finished the installation and i just get a blinking cursor now.
View 6 Replies
View Related
May 20, 2011
In the week since I upgraded to Natty, my system has spontaneously and randomly rebooted three times. Once when opening a document, one time when clicking a link and another time when I wasn't doing anything. This never happened with earlier releases
Toshiba Satellite A305
Intel Core2 Duo (64 bit)
3964 Megabytes Installed Memory
Intel 4 Series Express Integrated Graphics card
View 5 Replies
View Related
May 29, 2011
How can I solve this problem??? my router is Siemens Gigaset SE5678
View 4 Replies
View Related
Jan 3, 2010
I recently upgraded to win7 (home premium 64bit) from win vista and everything went well. But when i was installing ubuntu i noticed that win vista was taking up part of the C drive (like 10 gigs!) (i saw this in the part of the instalation where you set the ubuntu partition.) SO anyway i was wondering if anyone knew a way to completely get rid of the vista kernel and free up that space its taking up.
View 7 Replies
View Related
May 9, 2010
in Ubuntu 10.04 I have updated my system with command: sudo apt-get dist-upgrade and I see new kernel was installed. Now restart is required. I don't like to restart this computer, because it should be up and running as much time as possible. Is there any way I could only re-run some kind of kernel module or something like that instead of restarting whole computer?
View 3 Replies
View Related
Jun 9, 2011
My distribution upgrade got interrupted in a hard way and when I start the computer I get some errors:
Code:
kernel panic - not syncing: VFS: unable to mount root on block 0, 0
or sth like this and a few more errors. Can't look the exact message as I am writing from the liveCD. On Gparted the boot looks normal and it is said that it's mounted but there is no mount point. There are things on the hard drive that I must save.
View 2 Replies
View Related
