Ubuntu Installation :: Computer Crashed Off Mid Upgrade 10.04 To 10.10 Now Won't Boot
Oct 14, 2010
I was upgrading from 10.04 to 10.10 and the computer completely froze and I restarted it thinking I would be able to restart the update where I left off (I'm new to ubuntu). However when I restart I can't get anywhere, if I boot normally the ubuntu screen comes up and then it stops with the computer name in the middle of the screen and thats it (can't do anything i can't get into shell via ctrl-alt-f1 etc..) if i use the recovery from the grub menu it loads a bunch of things then stops i can't type anything but I can switch using ctrl-alt-f1 and ctrl-alt-f7 but I don't see anything except:
under ctrl-alt-f1 the last line reads:
[2.711773] composite sync not supported
under ctrl-alt-f7: the last lines read
fsck from util-linux-ng 2.17.2
init: udevtrigger main process (421) terminated with status 1
I was upgrading from 10.04 to 10.10 when my laptop crashed due to a HW issue not related to upgrade. But now when I start:
1) The laptop, it boots up till the point GDM log in screen is displayed without any log-in option. The system does not respond to any keyboard or mouse actions. 2) when I try to recover (recovery mode), the boot process comes til a point where it says "Console: switching to color frame buffer device 180x56"
And the prompt just stays there. It does not not drop to terminal. When I choose an older option in the grub, I do get dropped to initramfs prompt. How to restore my machine. re-instillation is not an option as I have some data I need in the home directory.
So I attempted to Upgrade 2 days ago from 9.10 to 10.04. I started the upgrade and left my computer alone as it said it would take several hours. When I returned to check on it, It told me the the installation had failed and it was attempting to roll back to the previous installation. Afterward I couldn't access anything on my computer. I'd click a icon and it wouldn't do anything. I manually restarted it and was greeted with a message that it couldn't boot because there was no mount specified.
Since I had backed up all my files I tried to just reinstall ubuntu. However even after I reinstalled I'm greeted with the same message.
I am writing this from a LiveDVD of 11.04. My machine, which is an Inspiron1501 with AMD64 dualcore crashed while running a working copy of 10.04LTS 32bit. At first Harddrived seemed unrecoverable, but not that may not be the case if I can mount it. HD is partitioned as 1 FAT which holds the OEM installer1 NTFS with a sub/ virtual NTFS (not as a file, but as a "partition", only readable from WinXX) 1 Linux Swap 1 Linux Extention 3 (I believe it is 3, as in EXT FS 3) Machine initially displayed:
Code:
[ 2.736258] Console: switching to colour frame buffer device 160x50 No init found. Try passing init= bootarg. BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)_
After following some advice, I booted into Win and shutdown cleanly. Which has made the machine only say this on boot:
Code:
No init found. Try passing init= bootarg. BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)_
Now, to make things a little more complicated, my home directory is encrypted. Could I just copy that over to a new install provided I can get it to mount?
When I updated Linux it crashed in the middle of the update. I think there was not enough disk space. I had a windows dual boot and tried to make the Linux partition larger but in doing that a crashed grub and can't use Linux or Windows. I tried super grub but it didn't work so I tried to fix the partitions with gparted live cd. It my disk just showed up as empty. I formatted it and re installed debian but it didn't work. I can see partitions but my computer won't boot.
One of my disks in my computer crashed, it was the one containing /boot and some data partitions. The other system and /home partitions were on a second disk, which is ok.
I was wondering, can I create a new /boot partition, and keep on using the rest of the system? Can I somehow do it with a chroot from a live/installer disk, run grub, and use my system again? I have another disk which I can put in the system, but there is even an unused partition on the disk which is ok (but it is rather big for /boot).
I have a desktop computer running Linux Mint 9 with the Gnome desktop (not sure what version -- though by default Mint 9 comes with Gnome 2.30). Last night I tried adding a panel to the desktop by right-clicking on the existing bottom panel and selecting "New Panel". Please note that I've already got another panel at the top of the desktop on the left side on autohide and no expand.
When I added another panel, it placed a normal panel on the right side of the screen without any problems. When I right-clicked on the new right-side panel and selected "Properties", I changed the orientation to "top" (where there was already a panel, if you remember). After that moment, it seemed like the entire desktop environment crashed. Everything was completely unresponsive -- the only thing moving on the screen was the mouse. I couldn't do anything with the gui, not even shut the computer down.
Since the gui shutdown wasn't working, I switched to a different tty screen, logged in, and ran a shutdown command with the option to reboot. The computer shut down fine, and when it woke back up, the same problem was still there: Nothing loaded on the screen except for the background image and the mouse, which was still able to move but nothing else. I have the computer set up to automatically log me in, so I know it's not crashing before the user prefs are being loaded...
After restarting it again and getting the same result, I switched to a different tty screen, logged in, and tried messing around with stuff to no avail. I did notice, however, that the computer was becoming evermore sluggish, and something printed on the screen stating that a program had been terminated because of "not enough memory". It seemed like some process was consuming WAY too much RAM by itself or a program was accidentally forkbombing the computer. ...All because I added a panel...?
I was updating Ubuntu 10.10 to 11.04 and my computer crashed/shutoff because of overheating(my laptop doesn't ever do this when running Windows 7 but seems to really need to be as cool as possible when running Ubuntu). the update was at about 12-18 minutes left(also i am using wubi to have it run alongside windows). After getting pissed off that i forgot to backup Ubuntu i restarted it to see if it would finish updating.
To my dismay it the loading screen looked a bit unusual and when it go to the login screen the word "Ubuntu" was flashing uncontrollably and the time in the bottom right corner was acting the same. i feel that i have totally ruined it and i also don't know how i can remove Ubuntu from my computer so that i could reinstall it as Ubuntu 11.04 instead of upgrading from 10.10. i still have Wubi.exe for Ubuntu 10.10 but i'm not sure if that just searches for the most recent version of Ubuntu.
My knowledge of how Linux works is very limited. I've used it for about a year, but just doing very basic tasks (browsing the Internet, listening to music, etc).
Anyway, I upgraded to the newest edition of Ubuntu and installed the new Grub as the update seemed to recommend installing it to every partition and hard drive. I've seen that other people are now having issues from doing that as well.
I am able to boot into Linux just fine; it is working great. However, when I attempted to load Windows XP from Grub, the computer would just restart. I followed the recommendation listed here: http://ubuntu-ky.ubuntuforums.org/sh...95&postcount=3 which seemed to fix the problem for Windows 7 users. Now, all I get when I attempt to load XP is a blank screen with nothing but a blinking cursor (but hey, at least the computer isn't just automatically re-booting, that's some sort of progress...maybe...)
i was install wine with the soft ware center when my computer crashed, now i cant uninstall it or cointinue the installation or unistall, when i do try to unistall i press the unistall icon nothing happens. when i go into the software center to try and reinstall it says waiting for other software managers to quit,
I just upgraded from Jaunty to Karmic, but once I loaded Karmic and rebooted, my computer will not complete the boot up sequence and go into any desktop. It starts the initial boot sequence with the mouse appearing and then goes to the screen that looks like it has an atom cloud. After that, the screen goes black and the mouse-arrow turns into that white rotating wheel, but it stays that way. It never actually goes into any type of operation! I tried to go from the command line and find Lucid to overlay it on Karmic and hopefully solve the problem. It just looks like to me that several of the packages I downloaded through my upgrade manager were corrupted. My computer doesn't even seem to be acknowledging my password because it gives me an error 32:must be authenticated.
I was upgrading to 10.04 through the update manager and my pc froze during the install, and I mean dead stop. It's happened a few times since I've come home from college for the summer, but I thought it was just the game I was playing or something so I wasn't concerned.
Now when I try to boot it gives me errors mounting /media/1 and /media/2 and various other others regarding NTFS (yet linux doesnt use NTFS so I'm confused...). When I hit any button that's not a letter (Esc, Delete, Backspace, etc.) it flashes over to a screen that says 10.04 with 4 dots underneath. Similar to what the loading screen should be, yet obviously not the loading screen.
Is there anyway I can install/upgrade this system through a LiveCD or something similar? I can't boot to Linux at all now, but I can boot to the Windows partition on the same hdd.
I was minutes away from finishing my upgrade and the screen went black and the mouse stopped moving. I left it for about 10 minutes to see if it would recover but nothing happened. I had to restart and now I've got nothing, not even a terminal prompt. If I start normally, I get a blinking white cursor (I cannot type) that never goes away and if I try recovery mode It hangs.
I have run 10.04 for some time with no issues. I was presented with the system option to upgrade to 11.04. This I did but the upgrade crashed out halfway through the install process, with a 'too many errors to continue upgrade, system maybe unstable'.
On re-boot I am now presented with;
And the system waits for the selection.
So my question is - how to recover this ?
I can get to a shell (#) and see files on the drive (using ls) so I know the drive hasn't died.
I was trying to upgrade to 10.04 (from 9.10 x86_64)when the update manager crashed without any warning or errors. it happened while the packages were being installed, as a result of which i could no longer login into gnome. so i logged in using the terminal and since i had cleaned the cache before upgrading i ran sudo -i dpkg *.deb (there were a large number of deb files in it, so i thought those were the upgrade packages) but the process couldn't be completed. it said that there were too many errors. after rebooting, gnome doesn't start and i can see lucid development version in the terminal. it also didn't detect my usb keyboard.do i have to reinstall ubuntu.
I started the upgrade to 10.10 and now the upgrade process is trying to get some input in the orange window. Problem is I can't bring that window to the front because metacity crashed. When I try to start metacity from a console it dumps core. How do I continue the upgrade?
I tried to upgrade two hardy them to 10.4 lcui and failed miserably. after upgrading, both fail to finish rebooting process; they stuck at maintenance mode. are there ways to rescue them? something went very wrong...
i wanted to upgrade my ubuntu system to meerkat beta via update manager like i upgraded it the last 5+ times.
a bug showed up that i can recall from updating files previously: some software installtions via update manager triggered the programm nicotine+ (i think is was something like man-lib or man-db that, when called by the installtion programm, would trigger nicotine too). since i can close that nicotine+-window and the installation process isnt bothered any further i didnt mind.
now with this upgrade, i had to close nicotine+ around 5 times since it got triggered together with some of the files that got updated/installed in this upgrade.
and then what happened: GError something about an "unrecognized image file", it concerned a py file that was named "nicotine"...
so i waited for 10 mins and figured out that the update process had stopped. i couldnt resist and logged out, wanting to delete nicotine from my system and to reinitialize the upgrade. well, nothing works since then, grub only lets me choose different kernels which didnt help much as there was no way to startx.
my question is:
how can i reset this upgrade mess or bring this pending upgrade to an end? can i do an upgrade via network, based on the emergency shell that comes up in some kernel-recoverymodes? or should i burn a livecd, boot it and then do what? repair? try another upgrade? delete nicotine?
having 'consumed' ubuntu for years now i still wouldnt know what else to do then posting here.
I have a laptop set up for dual-boot with Ubuntu and Win7. I also have a shared partition which I mounted as the /home directory in Ubuntu. The problem occurred as I was upgrading Ubuntu from 10.10 to 11.04. In the middle of the install, my computer froze for some reason and ultimately I had to shut the computer off and restart. When I restarted the linux would freeze half-way through boot-up with a message saying that the drive was mounted. Before the message saying the drive is not mounted it gave the following error: Can not read 'etc/udev_rule.d/z80_user.rules'
When I boot up Win7 it is unable to mount the shared partition and says that the drive is not formatted. I am also unable to run the ubuntu recovery option from GRUB. It asks me to give the "root password for maintenance," but it won't accept my root password. Would the upgrade have wiped my partition??? Or am I just locked out somehow because it was in the process of changing config files?
I installed F15 a couple days ago without much difficulty (and upgraded the kernel to the most recent, along with all the accompanying applications). However, I wanted to enhance my experience with the terminals, etc. So, today, I installed a gnome-3 advanced tweak or something along those lines (I forget the exact name already). This is software that is supposed to allow us to specify user-defined shells (not active yet), modify the terminal bars, etc. After installation, a menu bar came up, which allowed me to run the application. I ran it and it crashed.
Then I went to the applications section and started that job again and the whole system just froze, showing just a rotating wheel (as if a process is in progress). Nothing worked. So, I manually shut the system down and turned it back on again; and all I saw was that turning wheel and a small half-inch by half-inch square box (with just noisy colors). I then inserted my F15 installation DVD (the same DVD I used to install my OS), and started the machine; and the response is exactly the same as before: just that turning wheel with the noisy small square box. When I move my mouse around the wheel moves about in response. But, the system is just frozen.
I have just downloaded version 10.04 for my laptop as the previous version (9.?) stopped the internal fan from working. As it was installing the laptop got too hot and turned itself off. I have tryed to reboot but it won't.
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
my ubuntu laptop have crashed and all I get up is a terminal that report that it is a "read only file system". is there any way to move these files to a usb memory or to at least read them?
Fedora 12 randomly crashes after a fresh install.Everything is left at its default during the installation except I install KDE and not Gnome.When I try to boot I hit esc at the splash screen to see where it hangs, but it never hangs at the same spot twice. Sometimes it hangs and sometimes it restarts. Its crashed everywhere from starting udev to the login screen.
I've been using kubuntu for the past year because I have the same problem with F10 and F11. I dual boot with Windows 7 for games.
System specs: Motherboard: MSI P45 Platinum Processor: Intel Core 2 Duo E8500 Video Card: Radeon HD4850 Memory: 4GB (2x2GB) Patriot HDD: Main: 250GB SATA Western Digital code....
The computer crashed during an update and "An error occurred". The following details are provided: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report."
So, "michael@freegeek:~$ sudo dpkg --configure -a [sudo] password for michael: dpkg: parse error, in file '/var/lib/dpkg/updates/0117' near line 0: field name ' michael@freegeek:~$"
I have installed on friday a new distro on my computer, ubuntu 10.04 lts on my 1GB ram and 3Ghz computer. It has dual booting system. Everything worked fine, i have even been using the xwindows and althought i must say that it felt a bit slow in time reaction to my typing still good enough. I left the computer running with no programs, just idle and now my computers screen is dead. I can not see anything.
I restarted the computer and in normal mode it goes black.I started in recovery mode and i manage to get to a console where I type startx and i see the next error.So I had a fresh install, i worked with the xserver (so i do not think is a driver problem) fine until i left the computer without running anything and the xserver crashed.
I am using Ubuntu after a BSOD error. Ubuntu is awesome, I can access all my windows files, however, I need to access my programs on windows. Here's what happened- I accidentally changed permissions after getting a virus. I then tried to do a system restore and during that process the computer crashed. When I try to boot to windows in every possible mode, I am always left with the dreaded blue screen of death.
i can only boot to MSDOs with floppy msdos bootup on A:. I want to install ubuntu 10.10 and completely erase HDD but the ubuntu disc won't bootup even when bios is set for cd only. This is older HP pavillion that I have retired but HDD scans out good so I thought i would run Ubuntu only and maybe put MS out of business but not having any luck with install. When booting from HDD error is system 32hal dll is missing or corrupt but HDD C: is 0 anyway. I just want to install so I can play with Ubuntu.
My macbook pro stopped booting yesterday due to some file system corruption in the hard drive. I am able to access this drive through a linux live cd which I am using now but when I go to some folders it says "Could not enter folder /media/Macintosh HD/..." My question is how do I give myself the permissions to be able to access these files and transfer them to a network drive?
My laptop crashed in the middle of upgrading from Hardy Heron to 10.04. Now I can't boot at all. It'll load grub and let me pick an older kernal which gives me a reasonably familiar shell or I can let it go to the latest and it gives me some strange shell with very limited commands.
