Ubuntu Installation :: Computer Will No Longer Boot Into XP After Upgrade / Sort It?
May 8, 2010
My knowledge of how Linux works is very limited. I've used it for about a year, but just doing very basic tasks (browsing the Internet, listening to music, etc).
Anyway, I upgraded to the newest edition of Ubuntu and installed the new Grub as the update seemed to recommend installing it to every partition and hard drive. I've seen that other people are now having issues from doing that as well.
I am able to boot into Linux just fine; it is working great. However, when I attempted to load Windows XP from Grub, the computer would just restart. I followed the recommendation listed here: http://ubuntu-ky.ubuntuforums.org/sh...95&postcount=3 which seemed to fix the problem for Windows 7 users. Now, all I get when I attempt to load XP is a blank screen with nothing but a blinking cursor (but hey, at least the computer isn't just automatically re-booting, that's some sort of progress...maybe...)
View 4 Replies
ADVERTISEMENT
Dec 4, 2010
I have a 1.0 ghz G4 eMac running Tiger. Using Ubuntu 10.04's Live-CD I installed 10.04 on a 8-gig USB flash drive and it worked very well despite spending nearly five hours to download its files via DSL and a pokey USB 1.1 port. The flash drive's 10.04 installation worked just fine on my eMac and 900mhz G3 iBook except for Airport wireless non-connecting issues.(I like Ubuntu 10.04 because unlike Mint for PPC, you're not hassled or barred from accessing your Mac HD and its files.) THEN, to resolve my wireless issues, I decided to upgrade to 10.10 which took nearly 12 hours, and it seemed to've installed well until I tried booting the flash drive and it doesn't work. I get the Ubuntu icon in the Startup Disk screen but it keeps returning to it even after I select Ubuntu. The error screen I get reads code...
View 5 Replies
View Related
Oct 14, 2010
I was upgrading from 10.04 to 10.10 and the computer completely froze and I restarted it thinking I would be able to restart the update where I left off (I'm new to ubuntu). However when I restart I can't get anywhere, if I boot normally the ubuntu screen comes up and then it stops with the computer name in the middle of the screen and thats it (can't do anything i can't get into shell via ctrl-alt-f1 etc..) if i use the recovery from the grub menu it loads a bunch of things then stops i can't type anything but I can switch using ctrl-alt-f1 and ctrl-alt-f7 but I don't see anything except:
under ctrl-alt-f1 the last line reads:
[2.711773] composite sync not supported
under ctrl-alt-f7: the last lines read
fsck from util-linux-ng 2.17.2
init: udevtrigger main process (421) terminated with status 1
[code]....
View 6 Replies
View Related
Mar 1, 2011
I have (had) a dual boot computer;Win XP and Ubuntu 10.10 64 bit.I decided it was necessary to enlarge my Root and Home Partitions. Using the instructions http://ubuntuforums.org/showthread.p...ome+Partitions I successfully enlarged the partitions and restored 10.10 (I used the copy command suggested by Irony). However when I boot the computer it boots to Ubuntu but no longer gives me the option of going into XP(it is not listed in Grub menu). Is there a fairly straightforward way of getting XP back on the Grub menu so I can boot to XP again?
View 5 Replies
View Related
Mar 29, 2011
I'm using a dual boot computer which originally had only windows XP, and I added Ubuntu to make it a dual boot. I now have Ubuntu 10.04 and windows XP
I installed PHP, MySql and Apache using this guide:
[URL]
It seemed to work perfectly.
My problem is that when I shut down and restart, I no longer have the option to choose windows. Must I blank out the disk and reinstall EVERYTHING from the start, or is there any way to save this? My Ubuntu setup is much simpler than my windows, and if I MUST sacrifice one, it has to be Ubuntu, because it will be much easier to duplicate my ubuntu work than my windows work.
View 6 Replies
View Related
Dec 11, 2010
Upgrade from 10.04 to 10.10 has froze on restarting SQL server. Any idea what's going on because there hasn't been any error message yet?
View 1 Replies
View Related
May 1, 2011
I am trying to upgrade from Ubuntu 10.10 to 11.04.
When it gets to the end of the upgrade I get a dialog with the following error:
Quote:
Could not install the upgrades the upgrade has aborted. your system could be in an unusable state. A recovery will run now (dpkg __configure -a). code...
View 2 Replies
View Related
Sep 4, 2010
I did an upgrade and now after grub starts I get nothing but a blank screen. I should have left the well working alone. Any suggestions on what to do? I have no terminal, nothing any longer.
View 6 Replies
View Related
Feb 15, 2010
I recently upgraded from 9.04 to 9.10 and the sound on my machine no longer works. I was previously using the OSS for sound. I'd like the sound solution that requires the minimal effort and I don't necessarily need to run OSS again. Ubuntu is installed on a Dell Optiplex 960.
Code:
aplay -l
results in:
Code:
aplay: device_list:223: no soundcards found...
[Code].....
View 9 Replies
View Related
Mar 1, 2010
The last time I updated Linux it was from Gibbon to Heron. (so 7.10 to 8.04 ) I'm now trying to get caught back up. Thing is, now that I updated from 8.04 to 8.10 I can no longer get to a GUI. Also, most of the text in the terminal is a diamond character as if the font that's installed doesn't want to work most of the time. This is somewhat confusing, but I believe my system's language was set as Japanese before the upgrade and now it's trying to display Kana and/or Kanji and the terminal doesn't like that. Not really important, but I'm not sure how to proceed to the next upgrade or get to a GUI. Fortunately, my system's set up to dual-boot with windows. Can someone help tell me how to get my GUI back or what package to install?
I'm running on a laptop with an ATI mobility Radeon 9700. I've had problems with it and drivers in previous versions back to 6.10 too, but never to the point that the GUI wouldn't work.It's actually an issue with my X Server. I tried "startx" and it says "No Screens found". I looked in my xorg.conf file and there are two screens listed at the bottom. It produced a log too, but I can't get my Flash drive to mount so I can't say exactly what it says. It did mention that there were a lot of font directories that didn't exist along with a few other warnings.
View 2 Replies
View Related
Mar 10, 2010
gedit has not been able to detect the character coding.Please check that you are not trying to open a binary file.Select a character coding from the menu and try again.If I open OpenOffice first and then the document it works fine. If I use the shortcut directly, it won't open.Not overly impressed with 9.10 so far; things seem much slower, and it's certainly not as simple to find things as the old layout was.
View 4 Replies
View Related
Jan 8, 2009
Who has successfully upgraded going from F7 x86_64 to F9 x86_64 using the yum approach? I have had about 0% success getting everything to work correctly doing a fresh install of F9. Everything works correctly in F7( sound, firefox/flash, networking, samba, etc ), so I figure that starting with something know to work and upgrading to F9 might be a better approach that starting with F9 and having it guess.
View 7 Replies
View Related
Aug 18, 2010
I beleive I had version 9.x installed. I upgraded once and everything was fine. I went the upgrade manager again and it found some more upgrades. The upgrade messed with grub. It then told me there were no new upgrades. Then I rebooted and it says
Try (hd0,0): NTFS5
Then the screen clears and there is some text I can't read and then it says command not found. Then it reboots.
Is there a way to fix this?
If not is there a way to recover the files from the disk image file.
View 1 Replies
View Related
Jun 1, 2010
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies
View Related
May 2, 2010
I had a working lirc using my hauppage card. After upgrade to Lucid, it no longer works. I don't see errors, but it appears to me is is not detecting the Hauppage card:
Code:
mythuser@PVR1:~$ dmesg | grep lirc
[ 19.761015] lirc_dev: IR Remote Control driver registered, major 61
[ 19.928886] lirc_i2c: chip 0x0 found @ 0x18 (Leadtek IR)
[ 19.928890] lirc_dev: lirc_register_driver: sample_rate: 10
[61920.300286] [<e086d654>] lirc_unregister_driver+0x44/0x160 [lirc_dev]
[61920.300289] [<e089a02b>] ir_remove+0x1b/0x30 [lirc_i2c]
[61920.300318] [<e089abc2>] lirc_i2c_exit+0x12/0x14 [lirc_i2c]
View 1 Replies
View Related
Jul 22, 2010
Summary: After intermediate upgrade, Ubuntu Lucid LTS 10.04 64bit Desktop Edition will "NOW" not run in any Graphics mode on my machine.
General; Ubuntu has been my favorite OS to live on, play and relax. I have to use other OS'es, but I choose Ubuntu as "mine". I can go around it safely and tweak it to my own likings and needs. It has also been a great tool to exchange things between other OS'es.
History: I started with Ubuntu Karmic Koala 9.04 64bit Desktop Edition. Last March, I upgraded to Ubuntu Lucid LTS 10.04beta 64bit Desktop via the Update Manager, using Ubuntu's instructions... as a Beta Tester. I kept up with Updates and everything had been fine.All went well, albiet minor adventures that gave me oportunities for enriched challenges and training. Overall, since the early days of that, my system has been very stable and reliable- Until last Saturday through Yesterday...
Problems: First thing I noticed is that there were some security updates Friday. Saturday when I came up into Ubuntu, it came up in error saying it had to come up in a low graphics mode. I shut down the system and restarted. It came up fine and I thought nothing more of it at the time...
Second, I tried to install Ubuntu Lucid LTS 10.04 64bit Server Edition on another drive. My other drives were isolated. Although the install said it was successful, on reboot, it would not boot the system. It would get a purple splash on my screen, then either lockup or go to a text based screen dump. Server Platforms said this was a text based OS and couldn't explain the purple flash or the error... I shelved this project until later and thought nothing more of it.I checked for updates through the weekend (even though there usually isn't any on weekends), and as usual it said everything was up-to-date.
Third, Monday the "Update Manager" said there was too many updates to do at once, that it needed to do a partial update. I selected, but it couldn't complete, because it said that there was conflict on a KDE package that it said it needed to remove, but couldn't because it was in a blacklist. It further said that this could have resulted from a DEV vervion of Ubuntu.
Fourth, I upgraded some packages through the Synaptic Package Manager, to try to reduce the number of packages that the Update Manager was trying to update. All those packages said they updated fine. I then went back to the Update Manager and it still said it needed to do a partial update... but it completed and said it was successful. I noticed that the top of the dialog box was tiltled "Distrubution Upgrade." I noticed that some of the files seemed to be an xorg upgrade... After the update, I had to do other things, so I shut down my system.
That was the last time this machine has been able to start Ubuntu. When Ubuntu tried to startup, it said it had to boot in a low graphics mode, but could not- it blasted the monitor with vertical purple and red lines.I had a copy of the Ubuntu Lucid LTS 10.05 64bit Desktop Edition LiveCD on my other machine. I burned a CD and tried. The only mode I can get to boot from the CD (on my machine) is in a text console- no xwindows system. On starting up an xwindows system will blast the grahics of the monitor, then (sometimes) continue to a monitor test-based screen dump that flashes by until the system locksup.
View 6 Replies
View Related
Oct 12, 2010
Upgraded to 10.10 with update-manager last night, apart from an xorg.conf.d location change and a custom xfce applet that needed recompiling all went smoothly... until I tried another dist-upgrade.
Previous I had debian lenny and squeeze available in apt - I know this is dumb but a sync program I use requires binary versions to be identical (unison), and I sync with a debian squeeze server.
Code:
deb http://mirror.aarnet.edu.au/debian/ squeeze main contrib non-free
deb-src http://mirror.aarnet.edu.au/debian/ squeeze main contrib non-free
deb http://mirror.aarnet.edu.au/debian/ lenny main contrib non-free
deb-src http://mirror.aarnet.edu.au/debian/ lenny main contrib non-free
[Code].....
View 1 Replies
View Related
May 11, 2011
I have one hard disk (call her HDA) that contains nothing but a single ext4 partition containing a backup of all my important data. I did a clean install of 10.10 on my primary hard disk (call her HDB) and from there proceeded to the 11.04 upgrade. In 10.10, I was able to read HDA just fine. However after the upgrade, I can no longer mount this drive.
When mounting from file browser:
Code:
Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
The end of dmesg said the following:
Code:
dmesg | tail
[49.853308] wlan0: associated
[50.084874] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[52.859533] Intel AES-NI instructions are not detected.
[52.890955] padlock_aes: VIA PadLock not detected.
[60.710006] wlan0: no IPv6 routers present
[82.130904] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks) .....
[96.010858] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks)
[107.791812] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks)
[322.758948] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks)
[516.932403] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks)
For some reason my hard disk has a block count greater than the size of my device. I've done my background searching on this and tried a command line utility I've never heard of before:
Code:
# sudo e2fsck /dev/sda
e2fsck 1.41.14 (22-Dec-2010)
The filesystem size (according to the superblock) is 122096646 blocks
The physical size of the device is 122096381 blocks
Either the superblock or the partition table is likely to be corrupt!
Abort<y>? yes
And this is as far as I've got. I'm really hesitant to start fiddling around and experimenting with possible fixes because the backup data on this drive holds a decade's worth of work for me and is extremely valuable (hence why I have a spare drive for backups). I really didn't think that the Ubuntu upgrade process would mess with this drive, seeing as the Ubuntu install was contained on an entirely different drive. Any safest way for me to recover this data? Data preservation is the #1 priority for me here. I need to copy all of this data over to my primary drive where Ubuntu is installed. After that, I can reformat this "broken" backup drive.
View 4 Replies
View Related
Jun 2, 2011
Upgraded to 2.6.32-32-generic, it takes about 20 seconds after login at boot up; previous version only takes about 13 seconds. They are at the same environment and service status.(ubuntu 10.04)
View 1 Replies
View Related
May 28, 2010
When I run update manager, it gives me an error message saying:
Code:
This can be caused by:
* A previous update which didn't complete
* Problems with some of the installed software
* Unofficial software packages not provided by Ubuntu
* Normal changes of a pre-release version of Ubuntu
if I click partial upgrade, it looks like it did during the upgrade, then says:
Code:
There are no upgrades available for your system. The upgrade will now be canceled.
if I click close from the first "not all updates can be installed" dialog, it says:
Code:
It is impossible to install or remove any software. Please use the package manager "Synaptic" or run "sudo apt-get install -f" in a terminal to fix this issue at first.
running the suggested line gives the following output:
Code:
In Synaptic, fixing broken packages does nothing. Mark All Updates > Apply seems to work, but I'd still like to figure out why Update Manager does not?
View 7 Replies
View Related
Jan 5, 2011
Since I upgraded to 10.04 and ran Computer Janitor, the Xiphos Bible Guide no longer works. The splash screen comes up for a second and then disappears. I've tried removing and re-installing the program to no avail.
View 3 Replies
View Related
Dec 16, 2009
I recently upgraded to Fedora release 12 (Constantine) and noticed that sort is no longer case insensitive.
echo -e "ba
a
A" | sort
a
A
ba
I think it should be:
a
ba
A
The -f flag does not change anything. I have sort (GNU coreutils) 7.6.
View 4 Replies
View Related
Feb 22, 2010
I'm trying to install ubuntu on my laptop running Windows XP, and created a cd with ubuntu-9.10-desktop-i386.iso on it, about 706 Mb. Anyway, I've tried powering off and on, and my PC doesn't try to run the install CD in the CD drive. It just ignores it and starts windows. I've done this several times. I remember one time it asked how I wanted to install ubuntu, and I selected the "inside of windows" option so I can boot either Windows XP or ubuntu. But nothing happens.
View 7 Replies
View Related
Sep 8, 2010
Sorry for the really noob question.
I have Win XP on sdc. Boots fine
Installed 10.04 on a new sdb.
System still boots into XP without showing a menu. There is no grub loader and I couldn't find a place in the .iso install where the grub could be change from sdb to sdc. "Change location" only allowed sdb.
So what did I do incorrectly and how do I fix it.
Needless to say I've read many posts about multiboot, but this old brain can't determine what I did incorrectly
View 7 Replies
View Related
Jun 20, 2011
I use joomla and it only works with php5.2
I keep having to downgrade because ubuntu tried to upgrade to php5.3 everytime I try to upgrade something.
For instance, I just upgraded wine and didnt notice php5.3 in there as a dependancy, so now have to downgrade AGAIN!
Is there a way to upgrade wine without upgrading php as well?
View 2 Replies
View Related
Feb 8, 2010
Update manager reported some updates including kernel update to version 2.6.31-19.
after update system won't boot. it crashes into bash shell. I've manually loaded kernel version 16 with following command code...
same thing happened when version 17 came up. I definitely NEVER again going to update kernel. What do I need to do now? should I uninstall latest kernel...if that is possible?
View 2 Replies
View Related
Jul 22, 2010
I am tying to add Ubuntu 10.04 desktop i386 to my Windows 7 PC. I do not want to mess with the Windows boot loader, so as the sentence from the guide at the bottom states, tried to put GRUB onto the newly created partition for Ubuntu. I could not because upon choosing the device (which turned out to /dev/sda5) , the "OK" button was disabled
"Manual" option was chosen above - on a second try, I chose "use all available free space" and Ubuntu created #5 and #6 on SCSI1 (0, 0, 0). The new device was /dev-sda-1, but again, Ubuntu would not put the boot loader on it.
"If you have a problem with changing the MBR code, you might prefer to just install the code for pointing to GRUB to the first sector of your Ubuntu partition instead."
View 3 Replies
View Related
Aug 8, 2010
I have a triple-boot of Windows Vista, Ubuntu 10.4, and Mandriva 2010. After a re-installation of Ubuntu I have been unable to boot Mandriva (it doesn't appear on the boot menu). I could sure use some help with this. Following is some boot info that I downloaded code...
View 2 Replies
View Related
Nov 13, 2010
I have an ASUS G51J notebook with Windows 7 installed. I was following This Guide. I set aside about 100GB for the Unallocated partition. When I started my laptop, I chose to boot from CD (which has an Ubuntu 10.10 ISO on it). I saw a purple background with two icons at the bottom of the screen, and eventually "Ubuntu" appeared in the center with a few dots underneath it. These dots would change color from left to right like a loading bar.
This is where my issue comes up. My friend was using this same CD on his Dell laptop and his desktop which has a XFX motherboard, Q6600 processor, and Invidia 470 graphics card. After this "loading bar" was done, he would be asked if he wanted to boot or install Ubuntu.
This didn't happen for me. What happened instead was that I saw what looked like my Windows desktop after having gone through a meat grinder. There were various icons randomly in pieces all over the place. The only icon that was in one piece (by chance) was my shortcut to Skype.
Has anyone seen this before? Am I doing something wrong? My friend was saying that maybe I should try with a fresh reinstall of Windows and try again. I wasn't even given the choice to just boot from disc. It got to the point where I expected it to give me the options to do so, but instead the Kansas version of my desktop shows up after being hit by an F5
View 9 Replies
View Related
Apr 25, 2011
Fed up with Windows and ready to become a Linux convert. Here's the only problem:
I've created no less than four separate Live USB distros - all using different USB sticks -
yet my HP Pavilion dv7 refuses to recognize any of them as "bootable devices."
1) Have formatted USB sticks in FAT16 & FAT32 - neither made a difference.
2) Have created bootable USB sticks using Ubuntu Minimal Live install; Ubuntu full Live install; PuppyLinux Live install; even a simple gparted live install - none will boot.
3) Have checked & re-checked that BIOS is set to boot first from USB drive device.
4) 2 of the 4 USB sticks are new, fresh out of the packaging; and 3 of the 4 USB sticks are each from different manufacturers - so I'm fairly certain it's not a issue of a particular brand being incompatible, nor is it due to the sticks being corrupted somehow.
5) Each of the 4 live distros appears to have downloaded just fine - all necessary files appear to be in order.
6) Have tried using Unetbootin, Ubuntu's own live usb tool, and 1 or 2 others - all have failed to boot my HP laptop.
7) Have even tried removing all non-essential hardware before booting - even booting with no hard drives installed - system still returns the error "no bootable device detected."
This laptop is only 2 years old; I know it should be able to boot from USB. I can boot from a (rather old) SliTaz distro on CD just fine - but I need a persistent USB stick so I can easily add packages as needed, etc...s.
View 9 Replies
View Related
