Ubuntu Installation :: Computer Shut Off During Upgrade?
Aug 2, 2011
Last night I decided to upgrade to Natty Narwhal 11.04 from MM10.10. I tried to leave it to install overnight.
Some bright spark turned off the power supply to my computer.
I don't know exactly what stage the installation was at, but it must have been installing the upgrade at least, because I'm now locked out of my computer.
Boot up progresses until the ubuntu loading screen. At this point is says,
'Ubuntu 10.10'
The disk drive for / is not ready yet or not present Continue to wait; or press s to skip mounting or M for manual recovery.
(If I press 'S', it says something like 'cannot find /tmp folder')
I don't know if the upgrade installation was completed, but I suspect not, because the power was turned off just an hour into the installation. Also it still tries to load Ubuntu 10.10.
Anything I can do besides formatting for a fresh 11.04 install? If only to save some files?
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
OK, so basically my problem is that I can't log out, shut down, or restart my computer through the GUI. The thing is, it used to work. Note: this started happening right after I put in the lock / logout widget, but it's really a pain to have to go through the Kickoff menu to lock the screen each time, and leaving my files, online accounts, and what's on my screen open to anyone who wants to snoop is not an option. I may have to just suck it up and lock the screen the old-fashioned way, but only as a last resort.
Configuration: An older Gateway (idk the exact specs) desktop machine with Windows XP and Kubuntu 9.10 Karmic (dual-boot)
Since a long time I have a problem when shutting down my computer. I have ubuntu 8.04 installed, and I do install regularly all the updates including new kernels, etc. Here are the symptoms: After pressing "shutdown" (or issuing a command in terminal) it happens (always) that the screen is still working at the end of shutdown process (ubuntu progress bar is at minimum and it stays visible). Also, CPU fan is still working. However, power and HDD lights go off.
The only possible way to shutdown computer at that moment is holding power button for 5 seconds. However, restart works OK. Now, I am sure that shutdown worked earlier fine, but unfortunately I cannot remember when the problems started: either when I installed 8.04 or after installing some of the kernel updates. Configuration: Asus 5pgl-mx motherboard, 1.5 GB ram, nvidia graphic card (sorry, not sure what model), etc.
I have had an issue with the log out since yesterday. instead of shutting down the computer, the computer loaded the GDM. The only way to shut down is to click the log out on the GDM. What to do to resolve it?
I seem to get different options depending on the user. On my main, admin user, when I click on the `power button` icon on the right of my taskbar, I get a choice of:
shutdown restart suspend hibernate
and if I want to log off I click on the start button.but when I log on as my `guest` user, who has next to no permissions, I get log off, switch user etc on the `power button` icon. It would be nice to have all these options on the `power button` icon on my admin user. Can this be achieved? Why are they different?
I'm going to guess this has to do with me updating yesterday, as there were no problems before that. Which kind of ticks me off, because I came back to ubuntu because I got tired of micromanaging updates in arch.
Audio is down. The volume can be changed, but it isn't reflected in the volume icon at the top of the screen. Sound preferences show the only output available is a dummy speaker. When I try to restart or shut down, it just logs me out of my profile and takes me to the login screen. As always, if you need more info, just tell me where to find it.
Code: sudo shutdown now command does not shut the computer down
When the command is typed a, all the programs are closed and proceeds to shut down. But after some time, screen gets stuck(plymouth animation stops moving). But the computer is still working. Fan is running , Power LED is on. LED showing hard disk usage blinks at equal time interval. There is no problem in shutting down using the button on panel. So I suppose it is not a hardware problem. More over there is no problem in windows. The graphics card is Nvidia Geforce 7300GS. I am using proprietary Nvidia driver.
I have v 10.10 and I had to hook up with ethernet cord to download and activate both broadcom b43 and sta drivers. Once they were both downloaded and activated my wireless worked fine. (Also I have an hp mini 210-1000 if that helps.) After unplugging my laptop and using it, if it dies or if things are running really funky and it seems like it could use a restart, or on one of the many occasions where I am not going to be using it for a few days and just shut it down, as soon as I start it back up.
I find that sta driver still says activated under system - admin - additional drivers, however the b43 now says inactive, and my wireless wont connect to any router, even though it can detect them, until I connect with the ethernet cord and redo the whole driver activation for both, and then restart. This happens every time, and although I don't often take my laptop out of my room, my router is away from my desk, so this is a major inconvenience when i have work to do, or if I were to ever take it out somewhere with me.
1- I m having duel boot win xp and ubuntu...most of internet downloading i do from ubuntu....i know windows virus dont run on ubuntu even they come but what about my windows partition.....is that gets affected?
2- How to shut down computer from terminal? i want to specify time also.means at 12pm it should get shutdown something like that....but before getting shut down it should close all application if possible.
I've come across a problem just recently where my laptop will restart after I shut it down from within Debian. I've looked into my BIOS for anything that might trigger this, but could not find anything. I run Debian Testing 64-bit on a Dell Inspiron 17R laptop.
I'm stuck in the "log off" mode. I don't get the shut down menu. It started when I turned the computer on today. I got a verbose boot up and had to login and enter password and run "startx". Then I got a gray screen before the splash screen.
I had been trying to get alsa to start in the "runlevel" section yesterday, could I have messed something up in there causing this?
When I shut-down the computer from OpenSuse 11.4, it does log out and exit the operating system but the computer does not turn off. Can this possibly be corrected?
Brand-new to Linux. Using a computer with openSUSE 11.3 (64-bit) freshly installed. Install went flawlessly without any kind of error messages.
Hardware used: MSI X58 Eclipse, Intel i7-920, 6 GB memory, Seagate 500 GB SATA. openSUSE is the only OS installed.
After the install is finished, all programs work fine. HOWEVER when I try to shut down/restart the computer nothing happens! I basically have to use the power off button to shut down...
I could be wrong, but I swear that when I first considered switching to Linux a few years back the gnome windows manager's main menu had an option to exit said windows manager. There is obviously no such option now. Looking at some other forums, it seems that you can START gnome properly... but to exit the windows manager you have to kill processes? If I want to close down the Gnome WM without rebooting the computer - say, to just try TWM alone, or some other WM - there must be a 'legal' way to do it.
My computer won't shut off unless I just hold down the power button. Everytime I try System > Shut Off it just turns off, then restarts. My computer screen will sometimes just 'turn black' and become unresponsive, and I have to shut it down and restart. (The longest I waited was a few minutes with no response. How do I get customized mouse pointers? When I download something and 'extract' it, how do I know which file I'm supposed to open after I click 'show the files'? I've downloaded a few things and extracted them but I'm assuming I must do more, since they are not on my applications. Which is the best browser to use on Fedora? I love Opera, but for some reason my internet is twice as slow on Opera as it is on Firefox or Chrome?
I am considering trying out gentoo linux on my machine and wanted it to compile while I was gone (going to be gone for a week). I just want to make sure that my system will not MELT while I am not there to make sure everything is okay. I have a pentium 4 prescott. Will my computer automatically shut itself down if it overheats? I've heard its supposed to but sometimes is too late. Can I trust it?
I have deleted menu.lst file by mistake. Now i am afraid to restart my computer as i think This will not get the link for boot the system. Please let me know how can i restart my computer after shut down. Will it be a problem in starting of the system.
I was upgrading from 10.04 to 10.10 when my laptop crashed due to a HW issue not related to upgrade. But now when I start:
1) The laptop, it boots up till the point GDM log in screen is displayed without any log-in option. The system does not respond to any keyboard or mouse actions. 2) when I try to recover (recovery mode), the boot process comes til a point where it says "Console: switching to color frame buffer device 180x56"
And the prompt just stays there. It does not not drop to terminal. When I choose an older option in the grub, I do get dropped to initramfs prompt. How to restore my machine. re-instillation is not an option as I have some data I need in the home directory.
My daughter rebooted my computer while it was upgrading from Karmic to Lucid.
Now, of course, it won't reboot
"[ 0.683646]Kernel panic - not syncing: - VFS: Unable to mount root fs on unknown-block(0,0)"
I do have a very current backup of /home
I don't have a backup of any configuration files (/etc/conf and so on?)
I think that I will have to overwrite the whole installation and then restore my /home directory, which will mean tweaking all my software installations again?
While updating from 10.04 to 10.10, the PC got accidentaly rebooted. After that I am unable to start even 10.04. A small window tells that GNOME manager didnot install properly. The PC hangs after tat. How do I restore the 10.04 version without reinstalling it.
I upgraded the computer at work from 10.10 to 11.04 yesterday and that went okay. Some issues, but I can work them out. I thought I'd get the computer at home done yesterday too, but that failed. I'm now operating off of a USB drive. I also have Windows7 that I was able to function off of (probably have 3 hours logged on Windows in the last 4 months). Anyway, I have an AMD64 with 4 hard drives, of which we have 2 RAID settings so it's more like 2 hard drives. [Code]....
Just wanted to upgrade my desktop computer and after the terminal shows:
Installling new version of config file /etc/apparmor.d/usr.sbin.cupsd ...cups start/running, process 7944
The display froye, mouse does not move any more, keyboard does nothing, no chance to escape into a text terminal. Nada. After rebooting the system I get a kernel panic. This is now second of two upgrades to 11.04 that failed, and I do not know how often upgrades failed previously, but rather often.
I was upgrading from 10.04 to 10.10 and the computer completely froze and I restarted it thinking I would be able to restart the update where I left off (I'm new to ubuntu). However when I restart I can't get anywhere, if I boot normally the ubuntu screen comes up and then it stops with the computer name in the middle of the screen and thats it (can't do anything i can't get into shell via ctrl-alt-f1 etc..) if i use the recovery from the grub menu it loads a bunch of things then stops i can't type anything but I can switch using ctrl-alt-f1 and ctrl-alt-f7 but I don't see anything except:
under ctrl-alt-f1 the last line reads:
[2.711773] composite sync not supported under ctrl-alt-f7: the last lines read fsck from util-linux-ng 2.17.2 init: udevtrigger main process (421) terminated with status 1
I seem to have a small problem. Since september, i hooked up an old Acer laptop (with just 560 RAM and a 16 mib graphical card) to a computer screen, a keyboard and a mouse, so that i had an extra 'computer' for my mother to use. Old people prefer bigger screens to ponder upon.
But anyways, each time i want to update or upgrade the 9.04 Ubuntu distribution, it freezes. This is quite annoying since i really want it to upgrade to 9.10, for possible faster results.
My knowledge of how Linux works is very limited. I've used it for about a year, but just doing very basic tasks (browsing the Internet, listening to music, etc).
Anyway, I upgraded to the newest edition of Ubuntu and installed the new Grub as the update seemed to recommend installing it to every partition and hard drive. I've seen that other people are now having issues from doing that as well.
I am able to boot into Linux just fine; it is working great. However, when I attempted to load Windows XP from Grub, the computer would just restart. I followed the recommendation listed here: http://ubuntu-ky.ubuntuforums.org/sh...95&postcount=3 which seemed to fix the problem for Windows 7 users. Now, all I get when I attempt to load XP is a blank screen with nothing but a blinking cursor (but hey, at least the computer isn't just automatically re-booting, that's some sort of progress...maybe...)
kernel upgrade to 2.6.32-23-generic after i did this ... when im using 2 vmwares, it massivesly laggs my main OSS (ubuntu) then i went back to 2.6.32-22-generic <- and all came back to normal..when im running 4 Vmwares, it still doesnt lagg my main oss
I have Ubuntu Jaunty Jackalope running on my home PC (dual boot with Win XP) and have received notification that this will no longer be supported and I should upgrade to 11.04. I have a slow and costly internet connection at home and don't want to download the upgrade directly onto my computer there.Is it possible to download the upgrade somewhere else and burn to a CD to run in my home computer? I see I can do this for a new install but was wondering if it is possible for an upgrade?
