I am currently running Ubuntu Desktop 10.04 and windows xp in a dual-boot. I am looking to upgrade to windows 7 on the windows side soon but would rather not do a complete rebuild of the whole thing. The two are on separate hard drives so would i just install it on the Windows drive and then follow the instructions at [URL] or is there an easier way?
View 6 RepliesI just upgraded to Ubuntu 10.04 from 9.10 and now my Windows XP will not boot from grub. It shows up on the grub boot list but when I select it, all I get is a black screen. It worked perfectly just minutes before the upgrade, but now I cannot use windows, which I need really badly at this point.
View 9 Replies View RelatedI've heard people have been finding that when they upgrade from 9.10 to 10.04 on a machine that dual boots 9.10 and windows 7, they can't boot windows 7 afterwards. There is a fix to this problem but I would rather prevention to a cure.
View 8 Replies View RelatedDual Boot Problem after Upgrading to 10.04.
View 1 Replies View Relatedhow I can upgrade to the new version of Ubuntu on a dual-boot computer?
View 1 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI recently installed Debian 7 on a dual boot with Windows Vista. Thus, when I boot the computer, I am prompted by a GRUB screen to select Windows Vista loader, Debian, and Debian (recovery mode). I would like to upgrade Windows Vista to Windows 7. Will this cause an issue with GRUB? Will a Windows 7 loader be added to the list or will a Windows 7 loader replace the Windows Vista loader? Will there have to be a setting change within Debian? Within Windows?
View 6 Replies View RelatedI'm trying to reinstall FC10 after a foolish mistake I've done that costed me operation of my Fedora partition (uninstalling SELinuxpolicycoreutils).
I have a dual boot Ubuntu - FC 10 machine and delete my old fedora partition with GParted. However when I try to install FC 10 from the live CD using the option "Use free space on selected drives and create default layout" I get the error message:
Could not allocate requested partitions:
Partitioning failed:
The following errors occurred with your partitioning:
You have not defined a root partition (/), which is required for installation of Fedora to continue.
This can happen if there is not enough space on your hard drive(s) for the installation.
Press 'OK' to choose a different partitioning option.
This is the output of fdisk -l :
Partition table entries are not in disk order
My last option is erase everything from my drive including the Ubuntu partition and start over the installation, something that I would like to avoid.
i have been out of the ubuntu loop for several months due to a motherboard problem. i am going to be getting a new 64 laptop for christmas, with a dual core intel processor and windows 7 home premium as the OS.
i am looking forward to having my own computer again will be installing ubuntu on it. but, before i install ubuntu, i would like to know how to remove ubuntu and return the new computer to its original state if it ever becomes necessary.
i was comforatable using programs such as mbrfix along with gparted to accomplish this task with my old computer, but that was a 32 bit windows xp machine.
will i be able to use these programs with my new laptop? i'm unfamiliar with 64 bit systems, windows 7 etc. and how they may differ from the older computer that i was used to.
My laptop setup is:
sda1: W7
sda2: FAT16
sda3: /boot
sda4: encrypted LVM with debian (everything besides /boot)
now I've re-installed W7 so grub was overwritten. I've tried the procedure which worked for me previously:booting with the netinst usb in rescue mode, choosing a root partition to mount, using grub-install to reinstall the grub:
Code: Select allmount /dev/sda3 /boot
grub-install /dev/sda
Now I'm on Jessie (stable), and this time this fails, and I am able to mount only sda3.grub-install doesn't exit so I'm assuming it has been replaced by `grub-installer'. also '/boot' doesnt exist so I created it manually.
Code: Select allmount /dev/sda3 /boot
grub-installer /dev/sda
The latter fails with
Code: Select all/dev/sda/proc not a directory
I was upgrading our lab's dhcp server to Lucid and it totally died. I have it running on a Debian recovery cd right now. I ran into a bug in gtk which I seem to have fixed, but now I have more serious errors. If I boot without a CD, I get dumped into a busybox shell after the machine fails to boot. From the live CD, I tried dist-upgrading again and it dies trying to build and install rsyslog with a broken pipe error. I am at a loss as to what to do from here short of reinstalling (which is the last option as this server has a lot of custom configs on it)
View 6 Replies View RelatedI am trying to dual boot Fedora 13 onto my Windows 7 machine. I have shrunk my Windows drive to create 100GB of unpartitioned space, but when trying to install Fedora onto this free space (it is recognized as "Free" space), the installer tells me that there is no space for the partition.
View 5 Replies View RelatedI have XP on my IDE hard drive and Ubuntu on my USB hard drive (which is really an IDE drive with a USB adapter and external power souce). We've used Windows once in the past month, so we decided to jettison it. Two questions: 1. Can we simply delete all partiitions on the IDE hard drive and reformat or will this cause problems? 2 Is the write-speed gain worth switching the drives out, putting the Ubuntu drive in my IDE slot and my freshly wiped drive on the USB adapter?
View 3 Replies View RelatedI don't use Windows that often but thought since I have a copy of Win7 I might upgrade from the XP I'm currently using. I'm anticipating several issues, first Grub, can I get it going again after the Win7 upgrade without messing with my current Ubuntu install? the next issue is Win7 will want to make a "boot" partition, does this create any problem with partition names for Ubuntu? can this be solved by making the windows "primary" partition and using an extended partition inside that? is there anything I'm missing?
View 9 Replies View RelatedI hope this is posted in the right forumI have a dual boot ubuntu 10-4 and windows vista each on a separate 500 GB drive.nt to install Windows 7 in place of vista but I understand that there are some issues with grub 2 if vista and linux are already installed.Also can it be done from within Vista as an upgrade without doing a complete reinstall.I also wondered if installing windows 7 as a virtual box would be a better option.only have a few programs that I need to run in windows but I do use them regularly.
View 5 Replies View RelatedI have 10.10 installed on a Compaq laptop and want to set it up as a dual boot machine. I'm not sure how to 1) set up another partition 2) set up the dual boot and 3) install my second operating system. I'm sure that this is a pretty vanilla thing to do and am frustrated after trying to find out how to do it for a bit now.
View 2 Replies View RelatedI have a laptop with just ubuntu on it, but I would like to be able to dual boot windows and ubuntu WITHOUT removing ubuntu first. is there a way to do this?
View 1 Replies View RelatedHow do I add a win7 hard drive to a ubuntu 10.4 machine already running ubuntu, for dual boot? I really don't want to reinstall either one, so how do I fix grub to give Me a choice of OS's to boot up without using f12 key to choose boot order everytime ? , which works ok right now. I've done dual boots before, with both hdd's installed by installing winXp first then ubuntu, works fine in this order(winXp 1st then ubuntu ) because windows rewrites the boot order leaving ubuntu out of the mix. And even on the same hdd with partitions ,but can I add a hdd?. I removed linux hdd first then installed another hdd, installed win7, then replaced linux hdd. Both boot ok,but only by using the F12 key at start up and choosing a hdd to boot first.
View 6 Replies View RelatedIm trying to setup a dual boot on my laptop. it had vista installed on it and am having some trouble getting slack ware installed. I have gparted live to partition my drive but am not sure if im using the program properly. I tried resizing my HD before and once I booted the slackware cd, it says i have no linux or linux swap partitions installed:S
View 14 Replies View RelatedRecently, my Mint update informed me it had an upgraded kernel version of Mint 9 and asked did I want to upgrade. Me, not being an old hand at things Linux, upgraded. Instead of overwriting the older version, it put the upgraded version of Mint 9 BESIDE the older one. So now I have, actually, 4 versions of Mint 9 on my PC,(generic plus recovery mode for each) which is dual booted with Vista Home Premium.
I don't want this. I have had weird problems and hiccups since I upgraded. I want to get rid of the newer kernel version and use only the older one. How do I uninstall the upgraded version of Mint 9? I have tried to boot into the older version, but there is no desktop and I have to type on the boot screen and in the terminal. It wants commands I don't know how to give. How do I restore my older version of Mint 9?
I just want one version on my PC in the dual boot with Windows Vista. Can someone tell me how to accomplish this? If you give me terminal commands, please make sure they are copy and paste ready. lol.
If uninstalling involves deleting partitions and doing a manual partitioning and formatting, I'll need easy instructions for that also.
How to you mount a removable storage in Kubuntu 9.10 that is running on a dual-boot machine with Microsoft Windows XP.
View 4 Replies View Relatedi currently am running windos 7 (64 bit) and would also like to install ubuntu on a second hard drive. i understand a dual boot is easy enough to do, but i'd like to install ubuntu so that it and windows are completely isolated. rather than be prompted with a boot screen to choose os, i would do so by changing hd boot priority in bios. i'd like the end result to be 2 separte computers in one box. can it be set up this way, and if so, how?
View 5 Replies View RelatedI am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
I wanted to use Ubuntu on one of my old laptops (a great, speedy modern OS on a modest hardware PC). Unfortunately this PC can not at the time read all CD-ROM's (can't figure out why it does read some) and I've installed Ubuntu 7.10 - the only CD it did read at the time.
I've used it for two years but I never got my wireless card to work (OK, most of the time it was collecting dust) A couple of days ago I finally realized how to use ndiswrapper (lol...) and I was able to get a working Wi-Fi connection on this laptop. I then proceeded to upgrade it over the internet, to Ubuntu 8.04, then 8.10, then 9.04 and, last night, to 9.10.It has worked through each and every of these updates, but after 9.10 the PC won't even boot (after "GRUB loading...).
I have dual boot my Windows 7 PC with Ubuntu 10.10 recently. Ubuntu boots well until I upgraded the system with Upgrade Manager. Then all of a sudden it won't load anymore.
View 3 Replies View RelatedI installed Ubuntu 9.10 on Windows 7 system using Ubuntu disk partion option. Unbuntu works great but I can no longer access W7. Windows Loader Boot Option is in normal position as last selection of Grub menu but arrow keys do work. Acts as if keyboard is locked. System defaults to Ubuntu 9.10. How do I select Windows Loader Option
View 9 Replies View RelatedI am trying to upgrade to Ubuntu 10.04 and stumbled on a little problem. My partition scheme is as follows and I am installing Ubuntu on an External USB harddrive:
499 GB HARD DISK
WD My Passport 070B
MBR Partition table
49 MB Filesystem --/boot
Linux Ext4 (version1.0)
[Code]...
I have a dual boot (2 hard drive) system, and upgraded to 10.4. Booting into XP results in a flashing cursor that doesn't do anything. I know that GRUB screwed everything up, but I need to know what to do--and assume I don't know what I'm doing--to restore my dual boot ability.
Here's what I get after running a boot info script code...
i was in ubuntu 10.04 and I thought geting the lastest version is the smart thing to do right? so i went to the update manager and upgraded it to 10.10. but now when i restart the computer all I get is " a black screen with white text that says "Gnu Grub Version 1.98+20100804-5ubuntu3Minimal bash - like editing is supported for the first blah blah, Tab lists possible command completions. Anywher else TAB lists possible device or file completions.grub> "I have a dual boot that has Windows 7 and Ubuntu, Ubuntu being my main OS, I really need to get back on it.
View 9 Replies View Related