I'm installing 11.3 from USB stick. I went through the partition screen, etc and it did not mention anything about any data or other stuff on the harddisk. but when I got to the "Live Installation Settings" page, it shows the booting sections as:
+ openSUSE 11.3 (default)
+ openSUSE 11.2 - 2.6.31.12-0.2 (/dev/sdb2)
+ Linux Other
+ Failsafe -- openSUSE 11.3
how do I blow those others away? I want them erased aand don't want them in grub or "installed around", rather, I want it "installed over" them. Also, the "Linux Other" is the USB stick. Is it a problem to have that?
I'm about to ditch Freenas as my NAS software and make it an Ubuntu server box. The mainboard is an Asus AT3ION-T dual core Atom board. Freenas runs happily from USB stick. I have no optical device to install Ubuntu from and would like to install Ubuntu Server to a USB stick.
As the thread-title reads I'm looking for an app that helps me to create a bootable usb-stick with Windows XP on it for my girlfriend who wants to dualboot Windows for school work.Is there any app that fulfills my need? Or am I forced to use the command-line with fdisk or something? (an in case, what should I do?)
I tried to build a bootable USB stick using Code: Select alldd if=~/Desktop/linux/debian-8.0.0-i386-xfce-CD-1.img of=/dev/disk1 bs=1m as mentioned here: URL... but this does not work on my MacBook 3.1, late 2007 model (yes, I am using rEFIt and my CD drive is dead). The error message upon trying to boot from the USB stick using rEFIt says something like 'unable to load bootia32.efi'.
The workaround: I took the "bootX64.efi" from here:URL... on the USB drive and renamed it as "boot.efi".I copied the "debian-8.0.0-i386-xfce-CD-1.iso" to "/efi/boot" on the USB drive and renamed it as "boot.iso".So now my USB stick has 2 files only: "/efi/boot/boot.efi" and "/efi/boot/boot.iso" and nothing else.Now I was able to boot from the USB stick get into a GRUB prompt.
The installer starts fine and I choose my locale, keyboard etc. until it starts to scan for the CD drive and I face...The error message says that a CD was not found (as expected).I fired up the shell offered by the installer and mounted the USB stick to "/mnt/usb" like this:
Code: Select allmount /dev/hdb1 /mnt/usb
It works and I can see my ISO file in "/mnt/usb/efi/boot/boot.iso".I tried to mount the ISO image to "/dev/cdrom": Code: Select allmount -o loop -t iso9660 /mnt/usb/efi/boot/boot.iso /dev/cdrom
waited for a while and killed (control + c) the process and found that my "/dev" folder has been flooded with files named like the string "loop" followed by some digits (loop1245, loop8766 etc.).Can the Debian installer be somehow tricked into believing that the ISO file on the USB stick is the mounted CD?
Since playing games on Ubuntu is a pain, I've decided to sacrifice a few GB's to install Windows 7 on another partition. Is there any tool for Ubuntu to make USB sticks bootable? I've tried UNetbootin, but that's just for Linux distributions. I use Ubuntu 10.04 64Bit and want to install Windows Home Premium 64Bit, in case it's important...
I have recently bought a Asus Eee PC Seashell 1005PX and it came with Windows 7 Starter Edition, it doesn't have any CD/DVD so I'm gonna/have been trying for some time now to install Slackware 13.1 from my 8GB USB stick. I downloaded the 13.1 ISO file and used Unetbootin to transfer it to my USB stick. I get stuck in the setup in the setup when I am to select the SOURCE DESTINATION. I've tried /dev/sdb1 which is my USB, also i've tried using mount into different directories but i'm new to Linux so that didn't go very well..
Some of you have recommended Alien BOB's guide but I have read the first parts of it. Is it really for people with Windows OS? It's a bunch of Linux CLI code and programs.. ?
When I start bluej and try to open files from my memory stick the memory stick is not available. Is there any way that I can open files directly in bluej from my memory stick.
I recently purchased a camera with a 2GB Mini SD flash card. It has a usb card reader and works well. Is it possible to use that as a usb stick (disk) for installation? I want to burn the netinstall iso and also use the rest (partition the card) as storage for the camera if it can be done.
I used unetbootin (on another machine) to put the ubuntu 10.04 minimal amd64 .iso onto a usb stick. I used it to install a minimal system on a new 64-bit laptop (dual booting with Windows 7). Now, when I turn on the machine I get my choice of OS. When I pick Ubuntu, I get a blinking cursor, the harddrive is accessed. Then the cursor disappears, the harddrive is quiet, and nothing else happens.
I am attempting to install 10.10 from a usb stick after a disc installation failed, but it is taking forever. I am stuck on the screen which says 'Ubuntu 10.10' and has four little orange dots flashing as if it is loading. It has been like this for over 20 minutes now. Is this unusual or is it normal? Anyway, I am restarting my PC and trying again.
I have a PC with no option for a keyboard. I have to install the operating systems without a keyboard or mouse.
I have to make a bootable USB stick which can allow me to connect to the PC from my Laptop with a VNC connection, then the complete installation using IP to IP. I did this with the following:
Download [URL] Extract the files of .iso to my laptop Add the manual file in CentOS-6.0-i386-minimal/isolinux/ks.cfg
install lang en_US.UTF-8 keyboard us timezone --utc Europe/Brussels rootpw --iscrypted $6$i5qEWD. selinux --disabled
[Code]....
This allows you to modify your original iso files with the new contents and pack it as one .iso file
Finally load unetbootin and burn to your USB or disk or CD
i have been able to get my webcam working in Skype by doing the LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype command and installing v4l2ucp but it doesn't stick. So next time i boot it is like i didn't do anything. I have read a few things on it on this forum and i am not sure what to do next. Is there a conflict with my nvidia video card? I only installed Ubuntu 10 a week ago i think.
i was writing a .img file to my usb stick with ImageWriter, but it didn't seem to do anything so i clicked the close gtk button and pulled the stick out of my pc. now my pc gives my an when i try to open the stick. is there any way to fix this. I can use win xp pro, win xp media center, win 7 starter, ubuntu 9.10 and ubuntu 10.04
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
I'm going to boot up a desktop (that has a cd burner) from a USB stick of openSUSE 11.3. Will I be able to burn an iso (that's on the desktop's harddrive) to CD, i.e. can I use the cd burner, if I've booted from a USB stick?
When using the Universal USB Installer and following the instructions according to the Ubuntu web site, I get the following error: an error () "occurred while executing syslinux. Your USB drive won't be bootable" There is no number between the brackets and I has no problem with a previous version of Ubuntu netbook remix.
Now i see that i can't unmount (Safely remove device) any USB Memory Stick. If i try to unmount it in KDE, i always get error about one or more files are in use.
But if i execute "umount" in terminal, then it unmount without any problem.
I have read lots about KDE (4.xx) freeze on OpenSuse 11.3 Live. Well I have experienced it first hand.
My hard disk which had Opensuse 11.3 (reiserfs) crashed. It was a dual boot and a windows upgrade wiped out the partition information. I am still trying to resuce with dd-rescue.
Now in the meanwhile I burnt a opensuse 11.3 Live CD and worked on it for a week. I was bit annoyed that every too often the cd drive spins....so I decided to burn a usb stick. Its a 2 gb USB stick. I followed the instructions to the toto to burn the ISO image. Then my nightmares started
The USB STICK boot was smooth. However when the desktop starts ...the trouble begins. I clicked on firefox...after about 10 seconds I experienced the dreaded freeze first. I had to reboot the system.
Everything was fine till i started Firefox, the system froze. Now reboot -> start -> firefox --> freeze cycle continued. I got fed up.
I then downloaded google-chrome. Installed it (after updating a couple of drivers) . It worked flawless. I loaded it with graphics...still no problem. Then started firefox .. the system froze. I even disabled all KDE windows animation, set only one window pane, still there is a freeze.
I took my USB stick off and rebooted the system though live CD. I started firefox on boot, NO problems. Opened many many tabs. Still no problem.
So there is a SURE problem with USB + Firefox. I SUSPECT IT MORE DUE TO NETWORK ISSUES THAN GUI (DRIVER) ISSUE. If it were to be GUI driver issue firefox should have fozen both with CD and USB.
Mine is pentium duo processor machine with 2gb RAM (DDR2). Intel chipset for video. I checked the MD5 of downloaded ISO its matched the one on the site. So the iso image is flawless.
All the threads in this regard suspect the video drivers, but I ALSO suspect the network. May be there is a wait() state in the network driver that is holding the process for way too long causing the freeze. Somebody needs to check this up.
The freeze is on USB stick boot only and not on CD boot.
I'm currently having troubles upgrading my 11.1 system. My SuSE running 11.3 had crashed, and when I tried to reinstall it I couldn't find the cd. I only have a 11.1 distro cd, in which I had installed. I want to upgrade to 11.2 since that should be the easiest, from then I think i can figure out how to upgrade from 11.4. I currently do not have any cd's or a usb flash drive to mount the iso image onto. I've read through the wiki looking for a solution, but even with updating my repos i still haven't found the answer.
how to upgrade from 11.1 to 11.2 without a cd or usb stick.
I have a Mobidtv Trio v-gear which has the same specs as a MSI or geniatech usb stick inux-xf9w:/home/hase/RPM/dvb-apps # dmesg|tail results in :
[ 4570.766014] tuner-simple 0-0061: creating new instance [ 4570.766034] tuner-simple 0-0061: type set to 37 (LG PAL (newer TAPC series)) [ 4570.767247] em28xx #0: Config register raw data: 0xd0
[code]....
Neither with kaffeine, Me tv or tvtime can I search for channels? I run 11.2 Asus laptop Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz
I would like to disable the action that says "Download photos with digiKam" in KDE4 when inserting a storage-device such as a USB Stick. I have played around with the Device Action settings and the rule Download photos with digiKam but with no success.I have tried to set..
"All of the contained conditions must match" "The device's property StorageVolume.igonerd" -> true "The device's property StorageVolume.fsType" -> dummy
I'm running openSUSE 11.3 64 bit KDE 4 standardI have two monitors attached, running simultaneously, nicely, all is well.But when I reboot I have to set them up again because the settings don't stick/endure through a reboot.The GUI configurator that I use is at Menu --> Config Desktop --> General --> Display.How do I save the underlying settings and re-invoke them at boot time, perhaps from the CLI? Or some quick process that will do the job.
When I plug in my 8 GB SanDisk Cruzer USB stick into my desktop box, the KDE Device Notifier fails to recognize it. It will recognize every other USB stick. "fsck" reports no errors. I can mount it manually. I can read and write to it. The Device Notifier on my netbook recognizes it. So does another desktop box. By the way this started recently so I suspect some software update.
I have just installed opensuse for the first time. I have plugged in a USB memory stick but it does not register anywhere (eg Dolphin does not pick it up). how I can access the files on my USB stick?
When I plug in a USB flash memory in my computer, nothing happens, not even does it register in Dolphin. Any ideas what I should do to solve this problem and be able to access the files on the USB stick?
Been using 11.4 for the last few days and I think I might really like it. Thought getting my Broadcom wireless to work would be the hard part but I'm having real trouble with USB transfers for some reason. Tried to copy a 700MB .avi to a USB stick yesterday, I know it's good as I use it regularly. I get the KDE notification that it has copied the file (seemed far too quick but didn't think much of it) and then went to watch it.
Didn't show up on my telly and when I stuck it back in the computer to check it had only copied an arbitrary 39MB of the file. Tried again this morning, copying three albums to my phone - I get the notification that copying files has been completed almost instantly, I let it sit for five minutes and of the three albums one track has been transferred. It's an Android phone so I can use a file browser to confirm they are there, but they're all 0 bytes in size.
