I'm trying to boot with my Lucid live CD on my Windows XP Pro so I can dual boot my system. I get to a black screen with a little rectangle at the bottom next to a a little guy in a circle and then suddenly my monitor goes to sleep and nothing I do can wake it back up.
I know the CD works because I used it to dual boot my Windows Vista computer. how to make the boot work so I can install Ubuntu?
alrighty, long story short, I screwed up. I had installed a copy of ubuntu 9.1 to my sda1 partition and a copy of windows 7 to sda2 and it worked pretty well, but after needing to change the partitions around, I deleted sda1 and did a wubi install. I forgot to adjust the mbr before deleting the ubuntu install and my live CD is still running ubuntu 9.1 (think that's grub 1.5) and I can't update the live CD, as my only functioning OS is currently running off it. I suspect, therefore, that the mbr is still pointing to a now non-existant partition to find the boot files. So, in short, how do I use my current live CD to allow me to boot into windows in this situation? my current partition table is sda2: windows 7/wubi, sda1: media/backups
View 2 Replies View RelatedI have two hard drives in my laptop, they are NOT raid configured. I installed 32-bit Ubuntu on the second HD, third partition: Sdb3. I then installed 64-bit Windows 7 on the same hard drive, first partition: Sdb1 (Sdb2 is formatted NTFSd willusedasstorage).Windows installed fine.Then I installed Windows in 32-bit on the first hard drive, first partion: Sda1. Sda2 will again be used as storage.When I boot up, Windows boot manager gives me the option of the two windows OS's to install (but not Ubuntu of course).I wanted to boot into the Live CD, where I would reinstall grub, assuming it would recognize my two Windows, and I could boot into any of the three OS's upon start-up.The Ubuntu Live CD, will act as though it is going to boot, bringing me up to the loading screen, then it cuts out to "busy box" and I am not sure what to do. Buys box is almost like a command prompt, but I don't understand the commands.
View 1 Replies View Relatedi initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
is it possible to use a live cd to boot on a windows machine then scan with clam av if so how would you load AV, would it be possible to have AV on the same cd or would a seperate usb work? & not install it but use via cd/usb
View 3 Replies View RelatedThe boot.ini file for windows fail(reason unknown) and now i cant boot to any installed OS. Used Ubuntu live from usb to explore the disks, but as i tried to mount the W�ndows partition it failed..
Code:
# mount -t ntfs-3g /dev/sda /media/c/
ntfs_mst_post_read_fixup: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument
Record 0 has no FILE magic (0xffffffff)
[code]....
My laptop can't boot from cdrom becouse it is broken and it can't boot from USB becouse it has never been able. Ubuntu 8.10 now run in my laptop withgrub 1.I've just try the following trick.1) I put grub4dos in /boot2) I put iso image in /boot3) I add the follwing entrt in source.list
Code:
# =========== GRUB4GOS ===================================
title == Use grub4dos for the following entries: ==
[code]....
I have a Windows laptop that isn't booting up anymore for some reason Safe Mode doesn't even work. Looking at what is printed out when it hangs, I did a search on google and it is some sort of HP laptop problem. Apparently the hard drive should still be OK, if only I can access it somehow. I was thinking maybe I could use one of those live Linux CDs to boot up. But I'm not too familiar with those. Would they be able to detect the laptop's DVD burner, and allow me to burn files off the NTFS partition to a blank DVD? I want to get my data off before I hand the laptop over to the IT department - who knows what they will do to it. So exactly which live Linux CD flavor should I use (my other working computer only has a CD burner)? And then would it be easy to burn a DVD after booting up the live Linux CD?
View 1 Replies View RelatedI am attempting to Dual boot windows 7 and ubuntu 10.04 on my netbook. When i boot the Live CD from USB, and then go to the installation, then when i get to the partition part, it does not detect windows at all. It says that i have no operating systems installed. Is anyone else having this problem? Sorry if there is already a thread on this, I could not find one with a search.
View 9 Replies View RelatedI'm currently running Ubuntu 10.10 and wish to do a clean installation since it has become very cluttered with programs (I had the ooh, that looks like a cool free program I can download and then never use it again syndrome for a while). Since I've been doing some sound stuff with my computer, I decided to try Ubuntu Studio. Anyway, I am at college and do not have any cds available to be able to burn the image on. Is there a way to install Ubuntu onto my current partition (yes, I want to back everything up and erase what is on this partition) without burning the .iso to a disk. I have a Ubuntu 10.04 live disk and a Windows 7 partition on my hard drive. Is this possible with what I have and can anyone give me instructions or link me to something showing how? (I googled for a bit, but must have been missing the magic keywords if it's out there.)
View 3 Replies View RelatedI'm trying to set-up a dual-boot (Windows XP and Ubuntu 10.04), but whenever I start the installation from a Live CD and get to the partition section it is showing that my hard-drive is has no operating system, when it in fact does. Has anyone else encountered this issue, when trying to set-up dual-booting on their system? And, if you have had this issue, what did you do to resolve it? I find it very strange, since I've never had a problem like this with any of the older releases.
View 2 Replies View RelatedHey I have a laptop thats being stubborn and refuses to boot the xubuntu live cd like it cannot read the disc, while it will boot a FreeDos live cd. I can put the xubuntu CD in while in freedos and view it in as the X directory, is there anyway that I can try and boot the live CD from the FreeDOS interface
View 2 Replies View RelatedI tried installing Ubuntu 9.10 on an older computer. I figured since it was not that powerful, I'd try running it from the Live CD to see if it was acceptably fast. Of course, I forgot that I had put in a pair of unformatted 40 GB hard drives, so the Live CD didn't like those because there were no file systems to access. So I figured I would just reboot and install it. One problem: my PC acted as if there were no CD in the drive. So I tried a Windows XP CD, but I got the same result.
I reset the configuration data in my BIOS and I set the drives up correctly in there, made sure the boot order was right, and all of that. I was wondering if anyone has experienced something like this before, and if there's anything I can do before I try replacing the CD-ROM drive with another one. Computer info: Gigabyte 7IXE4 mobo with Athlon 1.2 GHz, 512 MB RAM, 2x 40 GB Seagate Barracuda HDs, not sure what the video card is (I'll worry about that one when I get there)
I cannot get past the login screen. I tried entering through it but that fails, it keeps returning me to the login. Is there a generic login for the Live CD to test drive UBUNTU?
View 4 Replies View RelatedI had issues installing Ubunut 9.10 on my Asus UX50 laptop but it installed perfectly on my tower. When installing 9.10 on my laptop I would get the live disc menu to try or install etc. Whenever I installed I got a big black screen for long lengths of time (each time varied from 15 minutes to 5+ hours), then on occasion I would get the glowy white Ubuntu logo, then if I was lucky, I would get scrolling code. It would scroll and scroll then stop. After the code stopped I would get the nice little blinking curser. I can type all types of fun things at this black screen but nothing seems to work.
I have tried 4 different CDS to no avail, my tower had the OS installed by one of the same discs.
I am successfully running 9.04 on this laptop.
a command of : lspci
gives me
Quote:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[Code].....
From what I understand, my nVidia card may be the issue. So I have tried to boot in safe graphics mode and this also does not work. Safe mode directly delivers me to my black screen with my blinking curser.
I have also checked my drivers and I have no proprietary drivers installed.
Since I have 9.04 installed successfully does any one think that upgrading from Upgrade Manager would be successful?
My notebook is an HP Envy 15 (Core i7 720QM, Intel DMI Host Bridge, PM55) I have 2 ISO files, Ubuntu Karmic 9.10 and Ubuntu lucid lynx 10.04, both have correct md5sums, i burned each on cd's and flash usb disks ( using unetbootin and lili usb tool ). However i never had a successful boot, i always reach : (initramfs): Unable to find a medium containing a live file system.
Bios of notebook has no settings to tweak regarding HDD Could this be a sata issue anyway ? I tried searching for this issue on the forums but all the posts were having burn problems, I also tried the flash usb disks on a desktop machine and they boot properly with no problem.
I'm trying to get a persistent live usb of ubuntu lucid, with usb creator. When trying to boot, it will just display "boot error". So I clean the USB key, re-installed everything. Still the same. Then I try on laptop, and surprise, it works. So i restored default on the desktop's BIOS. And updated BIOS.No changes.
View 9 Replies View RelatedI am trying to boot the latest Ubuntu/Kubuntu 10.04 Lucid Lynx but im facing the same problem. The scrolling dots appear but then when its supposed to load X, no display on my monitor.. My monitor shows no signal.I am getting this bug on ubuntu, kubuntu and even linux mint which is a spinoff of ubuntu. Is there no way for me to boot the live cd using safe graphics mode or something? Same error when trying to install using wubi.
View 4 Replies View RelatedTwo days ago Ubuntu crashed and I had to reformat my computer (I don't know what happened and I couldn't fix it). I'm running Window XP right now and am having trouble booting/installing several distros of linux.
I've tried Kubuntu, Ubuntu, Xbuntu, Puppylinux, and Fedora live CDs and continue to get the same thing.
When I boot, after the bios, I get a flashing "_". I don't get a boot and have to reboot and remove the CD.
I would like to get Xbuntu running as soon as possible.
EDIT: Also, In windows, when I go to my computer I cannot see the Live CDs. I don't know if this is related in some way.
I've created a live usb with Startup Disk Creator on my desktop running Ubuntu 10.10. The live usb is Mint 10 (Julia). I wish to overwrite Ubuntu 10.04 running on my Dell Inspiron 6000 laptop. The reason for this is that Mint requires fewer resources and is better suited for my laptop duties.
I have used the live usb solution for several installs and never had a problem. Following protocol, I shut down the laptop, inserted the live usb and restarted. Nadda.
I made sure that the USB is the 1st boot device in the BIOS.
Upon restart, a line comes up with this:
Code:
vesamenu.c32: not a COM32R image
boot:
It just repeats itself every 10 seconds.
I'm using a Verbatim 8.0 GB usb.
i got a new laptop today, i bought it just to use linux. i but the iso on my usb and it works fine on the pc, but when i try it on my new laptop i am getting 'boot error' and must restart and remove usb.
iso: ubuntu-10.10-desktop-amd64.iso
[URL]
I made a Live USB with Lubuntu 11.04. I installed it on my other laptop and it worked fine. Now I install it on my other and it says "Can't Find Medium With Live File System". A difference could be that on the first laptop, I used Plop Boot Manager to boot the USB. Could that affect it?
View 4 Replies View RelatedI have used this CD to install successfully before, but on the computer i am currently trying to install it on, it won't load after pressing Install Ubuntu. Natty Narwhall 11.04 by the way
View 1 Replies View RelatedI downloaded Ubuntu 10.10 2 days ago and tried to instal it on my:HP EliteBook 8540wIntel Core i7 740QMIntel QM57 Express8GB RAMnVidia Quadro FX 1800 with CUDA (1GB)Of course I went 64bit, but the Live CD wouldn't start. Instead I get some weird artifacts on my screen.I can see bits of my Windows-background with taskbar and some of the windows I was using earlier before restarting, like the download manager. If cold boot my PC I see black and white boxes with coloured dots on them.
Thus I thought of an issue with the 64bit architecture and possibly the grafics card too (the artifacts are clearly remnants of data from the VRAM)I tried the same with the 32bit version and got the same issue (indicating NO issue with 64bit, at least not directly).In the end, I installed Ubuntu from the alternate 64bit CD and now am stuck with a non-working installation of Ubuntu.I get some kind of error concerning pcieport (probably PCI Express).When I install Ubuntu on Virtualbox through Windows 7 however, I don't get any kind of issue (I'd still like to be able to run Ubuntu natively)Any idea on how to fix the problem?PS: I'm not very experienced with Linux, so if you ask me to go into console mode, please be detailed on what command I should input.
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I just installed Windows 7, so my grub is gone. I was wondering if there is a way to use a live cd to boot into my ubuntu partition. I'm likely going to scrap my ubuntu partition soon, so I don't want to mess with installing grub.
View 5 Replies View RelatedI have installed Ubuntu 9.04 fom a Live CD. My system is a Dell Optiplex 745 that originally had Windows XP installed. Ubuntu is the only OS. Windows XP was removed.
The sytem appears to be running normaly.
When I shutdown (not restart) and then power cycle the computer, I see the Dell splash screen then I get the message: "Errorauto-sensing secondary master hard disk drive. Strike F! key to continue, F2 to run the setup." F1 repeats the message. F2 enters the BIOS setup but does not lead to a fix.
If I place the Live CD in the tray and boot from that, I get to the Ubunt install directory.
If I click "Check disc for defects", then run the check. (I can even interupt the check without completing by hitting ESC), then the system reboots.
I see the Dell Splashscreen.
I see the Ubuntu Live CD menu
I choose "Boot from first hard disk"
Then Ubuntu loads perfectly. I enter my username's passord.
The system runs fine until the next time I shutdown.
How do I get the system to boot directly without needing the LiveCD?
I created a Ubuntu live usb，it works fine on my notebook, but boots fail on my desktop pc. I found that /dev/sdb1 is always mounted to /cdrom when booting, but usb key is /dev/sdc on my desktop pc, it causes sequence booting process which depend upon files under /cdrom fails.
View 2 Replies View RelatedI have 2 laptops a Dell & a Toshiba. Both have NVidia GeForce FX Go 5200 cards. I first did an upgrade on the Dell and that ended in a BSOD. I used the Alt CD for that. I just received the Live CD in the mail. I put it in the Dell and ended with a BSOD. I figured as much. What got me is that I couldn't get 9.1 to boot after that. It kept trying and would shut done. After the 4th time it booted. I hope it continues.
I thought I'd try it in the Toshiba and it went fine LIVE. I can't install it on that machine as it's my recording only lappy. 10.04 is pretty but can't tell much else.
I am unable to boot 9.10 or 10.04 Live CDs.9.04 can boot.When attempting to boot the LiveCD/USB (I have tried both), if I attempt the basic install/start/check CD, I get a blank screen.If I use the option selection to set nomode(something) command (I will verify later, posting from work) with verbose and quiet disabled, I can get further, but can still not boot.Any ideas as to how to get a boot of of the LiveCD?
View 4 Replies View Related
