I recently upgraded my Ubuntu from 9.10 to 10.04 and now it's messed up my Windows Vista partition. When I try to load Windows it boots to a strange login menu with low resolution. It then takes me to a screen with options like Repair/Fix, Recovery, Complete Recovery... I'll click Repair and and then it will say No errors found, Shut down, Restart.
View 2 Replies
i have just installed fedora over a existing copy of ubuntu. The problem is i cant boot in to vista any more. i have looked over many forums trying to fix it but still wont work.the attachments are of screen shots i have with the details of the hard drive partitions.i am able to mount the hard drives and have all the data still and still have the boot folder for vista but just cant figure out how to boot in to vista.i also get the error " error 1: filename must be an absolute pathname press any key to continue" i get this error when i try to change the boot partitons
View 4 Replies View Relatedi installed ubuntu 10.10 to my external HDD and it works. Recently, i reinstalled windows therefore, there is no more grub menu when my computer boots. I tried to reinstall grub to my external HDD but it doesn't work.
View 9 Replies View RelatedI upgraded a linux box from Koala to Lucid, and everything seems ok except at boot I occasionally get an error mounting some partitions. Here is the boot.log:
Code:
fsck from util-linux-ng 2.17.2
/dev/sdb1: clean, 316325/17965056 files, 5723474/71844680 blocks
udevd[402]: can not read '/etc/udev/rules.d/z80_user.rules'
mount: /dev/sdb1 already mounted or /backup busy
mount: according to mtab, /dev/sdb1 is mounted on /
[Code]...
I recently upgraded grub -> grub2 on my karmic box. Grub2 worked when chainloaded from legacy grub, and also the first time I tried it standalone. Both times the grub2 menu came up.
I ran vbeinfo at a grub2 command prompt, and found my monitor's native res listed - 1280x1024. I added that to my /etc/defaults/grub and then ran update-grub, and rebooted. This time no menu appeared and the default entry booted straight away. I suspected that the resolution was not supported for some reason or that the way I entered it in the config file was wrong, so I commented it out again in /etc/default/grub, and ran update-grub again - to no avail.
I have since tried lots of different formats for the GRUB_GFXMODE, such as 1280x1024@24, 1280x1024x24, and the normal 640x480, but none of them give me a grub menu. I have even tried using GRUB_TERMINAL=console, to no avail. I have checked the /boot/grub/grub.cfg file each time to make sure my changes were put there correctly by update-grub. I have also made sure that timeout was set to 10, and the hidden timeout was set to 0. My GRUB_CMDLINE_LINUX_DEFAULT="quiet".
I have reinstalled grub2, grub-pc, and grub-common, and I have dpkg-reconfigured them all too. I have no idea what to do to get my grub menu showing up again.
I just upgraded my 9.10 on my laptop to 10.04. I seems to have gone well except for one annoying problem. when I boot up I get a large X for the mouse pointer instead of the normal arrow. When I start an application it will not go to full screen and there are no close/minimise/maximise options. Nor can I get to the top or bottom menu bars.
I can cure this on a temporary basis by right-clicking on the desktop and changing the visual effects from none to normal. The problem is that it does not stick. Each time I boot up I have to make this change.
I installed Ubuntu over my windows partition but kept the other NTFS partitions that I use for storage. For some reason GRUB shows up with the option to boot into XP (which isn't there). How do I get rid of the boot menu completely so my computer boots straight into Ubuntu?
View 2 Replies View RelatedStrange line of text appeared on open gedit page on first use after upgrade from 10.04 t0 10.10. I was reading something and copypasting the odd bit onto a gedit note: left the room, returned to find blank page except for "nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn". Then I saw that it was just the tail-end of a longer line which had stretched the page width to max, and by deleting backwards I arrived beneath my intact notes. The line was "I[my bolding]nnnnnnnnnn...nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnby v9898". I googled v9898. And there's a v9898. com. It provides something for Windows systems.
View 1 Replies View RelatedI installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?
View 8 Replies View RelatedI clicked on the upgrade to LTS 10.04 option on my Asus 901 EEE PC and after completion it will only boot straight to command line...I would like to get back to the UNR Gui.
View 2 Replies View RelatedAfter my upgrade the bootup seems to take a long time.I am dual booting with XP.From the boot menu when I select Ubuntu it takes 35 seconds before I get the login screen.Is this normal?Also, other apps seem to be running slow. Running Win 7 under VMWare Workstation 7.1.
View 7 Replies View RelatedSummary: After intermediate upgrade, Ubuntu Lucid LTS 10.04 64bit Desktop Edition will "NOW" not run in any Graphics mode on my machine.
General; Ubuntu has been my favorite OS to live on, play and relax. I have to use other OS'es, but I choose Ubuntu as "mine". I can go around it safely and tweak it to my own likings and needs. It has also been a great tool to exchange things between other OS'es.
History: I started with Ubuntu Karmic Koala 9.04 64bit Desktop Edition. Last March, I upgraded to Ubuntu Lucid LTS 10.04beta 64bit Desktop via the Update Manager, using Ubuntu's instructions... as a Beta Tester. I kept up with Updates and everything had been fine.All went well, albiet minor adventures that gave me oportunities for enriched challenges and training. Overall, since the early days of that, my system has been very stable and reliable- Until last Saturday through Yesterday...
Problems: First thing I noticed is that there were some security updates Friday. Saturday when I came up into Ubuntu, it came up in error saying it had to come up in a low graphics mode. I shut down the system and restarted. It came up fine and I thought nothing more of it at the time...
Second, I tried to install Ubuntu Lucid LTS 10.04 64bit Server Edition on another drive. My other drives were isolated. Although the install said it was successful, on reboot, it would not boot the system. It would get a purple splash on my screen, then either lockup or go to a text based screen dump. Server Platforms said this was a text based OS and couldn't explain the purple flash or the error... I shelved this project until later and thought nothing more of it.I checked for updates through the weekend (even though there usually isn't any on weekends), and as usual it said everything was up-to-date.
Third, Monday the "Update Manager" said there was too many updates to do at once, that it needed to do a partial update. I selected, but it couldn't complete, because it said that there was conflict on a KDE package that it said it needed to remove, but couldn't because it was in a blacklist. It further said that this could have resulted from a DEV vervion of Ubuntu.
Fourth, I upgraded some packages through the Synaptic Package Manager, to try to reduce the number of packages that the Update Manager was trying to update. All those packages said they updated fine. I then went back to the Update Manager and it still said it needed to do a partial update... but it completed and said it was successful. I noticed that the top of the dialog box was tiltled "Distrubution Upgrade." I noticed that some of the files seemed to be an xorg upgrade... After the update, I had to do other things, so I shut down my system.
That was the last time this machine has been able to start Ubuntu. When Ubuntu tried to startup, it said it had to boot in a low graphics mode, but could not- it blasted the monitor with vertical purple and red lines.I had a copy of the Ubuntu Lucid LTS 10.05 64bit Desktop Edition LiveCD on my other machine. I burned a CD and tried. The only mode I can get to boot from the CD (on my machine) is in a text console- no xwindows system. On starting up an xwindows system will blast the grahics of the monitor, then (sometimes) continue to a monitor test-based screen dump that flashes by until the system locksup.
I upgraded from 10.10 to 11.04 and after the upgrade
- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!
I saw, at the end of the installation process, that the driver for the nVidia video card was removed.
I tend to update stuff slower than most - I'm still using Hardy and I probably won't upgrade to Lucid until June-ish. I wanted to test drive GRUB2 so I upgraded following instructions here:When I chainloaded GRUB2, I got a menu that only contained Ubuntu; my Windows Vista bootloader entry had disappeared. I couldn't find a sample "40_custom" entry to modify when I tried to create an entry for Vista myself. Had no problem booting into Ubuntu and I could still boot Vista from the old menu. Spent about 20 minutes on it, then I gave up and reinstalled legacy GRUB.
View 9 Replies View Relatedjust upgraded to Lucid. When booting, I get a blinking cursor on a black screen for 30 sec. Then I get some flashes of text about UDEV. Finally, I get a desktop after about 30 more sec.
Any way to speed this up? I've already tried disabling my nonexistent floppy drive in the bios, but it didn't help.
I have a similar problem to that described in the 'MBR questions (and: Windows 7 not booting with Grub2)' Thread, except that mine is with Vista and the bootinfoscript result is different.
I have upgraded from Ubuntu 9.10 to 10.04 on my desktop PC, running Vista from sda1 with Linux on sda6 (actually the second partition of the 320 gig master drive, there is a similar external HD that causes the high number, but its presence or absence has no effect on my problem).
On booting, a cursor flashes top left on a blank screen ( no 'Grub Loading' text) and then the grub menu shows the new 32.22 Linux options and the Windows Vista booting from sda1.
If I press enter on the Linux option the cursor flashes for 20 seconds and then boots into Ubuntu with no problems.
If I press Enter on the Windows option the cursor flashes for 3 minutes without any change, completely unresponsive to any Keyboard input. ( I have not left it any longer, I have to hit the power button to shut down.)
If I press 'e' on the Windows option the screen shows: Gnu Grub v1.98 -1ubuntu6; Ctrl-x gives a terminal with a 'GRUB>' prompt, but it does not recognise any commands I tried. The boot option shows 'Disk Boot Failure,insert System Disk and Press Enter.' Pressing Enter reverts to the Grub Menu.
Booting from a Vista recover DVD and running Startup Repair shows no error, but it still does not boot. The dvd does not give me the option to repair the MBR, but does offer a Command Prompt. Can I repair the MBR from there ? if that is what I need to do.
If so what commands should I use ?
Bootinfoscript shows Grub2 in sda0 and both sda1 and sda5 (the Recover partition) pointing to different places in neither of which is core.img to be found:
Code:
Should I remove the Grub 2 from one or more of the partitions, as described by darkod ?
My system is : Medion MD 8822 with a 2.9GHz Dual Core Intel CPU, running Vista Home Premium 32 bit, 2Gb DDR2 Ram, 320 Gb Sata HD and externally similar HD( not plugged in when these tests were done, though it was during the upgrade installation).
After the upgrade to Ubuntu 10.4 I'm not able to boot on my Windows Vista any more.
Here is the RESULT.txt from the boot script:..help please..help please
Code:
Boot Info Summary:
I had an odd thing occur after a fresh install of Ubuntu 10.04. I installed Windows 7 on its partition, and all went fine. Then I installed Ubuntu on its partition and everything was as it should be. Then I did the Ubuntu updates and now my boot window looks like this ... I can click on any of the Ubuntu logins and it takes me to the same place.
View 8 Replies View RelatedI upgraded my dual-boot (Vista/Ubuntu) system last night to 10.4. Everything had been working perfectly running karmic.
As I recall, during the upgrade process, something, I assume grub 2, asked for a list of boot devices and defaulted to selecting all devices, one of which was a non-bootable USB stick. I consented.
This returned some sort of error; I made a couple different choices selecting different drives until ultimately it accepted my choice and continued the upgrade process.
Once the upgrade completed, I could no longer boot into Vista. I now assume that one of the choices that I deselected was the dual-boot manager.
From what I can tell, all the Windows files remain intact, I just can't boot into Vista.
After the upgrade to Ubuntu 10.4 I'm not able to boot on my Windows Vista any more. It is most likely due to my fault during installation, since I ask to overwrite with GRUB also Windows partition's MBR (but if I remember well I think it was not the best solution to put as default overwriting all the MBRs).Anyway I was not able to fix it until now.Here is the RESULT.txt from the boot script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
[code]...
I recently upgraded to Ubuntu 10.04. Now after rebooting I don't get the grub menu anymore nor can I get into ubuntu or vista (I used to dual boot between ubuntu and vista). I get to a black screen with an blinking cursor.
Disk info:
HP dv5t x64 Intel 2.40 Ghz
I recently upgraded my Ubuntu from 9.10 to 10.04 and now it's messed up my Windows Vista partition. When I try to load Windows it boots to a strange login menu with low resolution. It then takes me to a screen with options like Repair/Fix, Recovery, Complete Recovery... I'll click Repair and and then it will say No errors found, Shut down, Restart.
View 2 Replies View RelatedI haven't done this in a long time, so I probably just need a quick refresher on a few things. I had to revert to Vista as my primary OS for more than a year to do CAD work, but now I finally have the freedom to move back to Ubuntu. I have my Win7 upgrade that I still haven't done (yes, I know I'm late to the party) and I want to update my Ubuntu 9.04 install to 10.10.
If I remember how to do this correctly, I should upgrade Vista to Win7 first, and then install Ubuntu second. I have two separate hard drives, so each OS will go on a separate one. The only issue I had in the past is that the drive with Ubuntu on it must be set as the primary boot device, otherwise GRUB wouldn't load. Is this all correct? I've been out of the Ubuntu loop for quite a while, are there any caveats to this process that I should be aware of?
I have a pretty good grasp on general computer works and I have read alot about the dual boot system and can do it with multiple variations of linux. My problem lies within my laptop, that I want to do a dual boot on (which is my only one with wireless). It is currently running Vista Home Premium-x86 and I would like the upgrade to Windows 7 Proffessional-x64. I have access to it but I have to keep Vista as is in order to keep Windows 7 as an upgrade which will have to be a custom install. This HD is dedicated to Vista and the backup partition as it is already.
I've read just about everywhere that you first have to do Ubuntu install and partition and then Windows, which makes sence, and then change the GRUB. However, I'm unsure about this case.
What would be the best way of going about making the partitioning scheme? I've already backed up everything possible so loosing that info is not the problem. Vista is the problem. My HD is a toshiba 320gbs- 2.5" form factor. My plan was to make 3 partitions. Windows, Ubuntu, and then the back up partion for Windows. I wanted to allocate Windows 150gb, Ubuntu 150gb, and then the other 20gb as back up for Windows.
I have a 250Gb hd on my Vista machine that I allocated 130Gb to an Ubuntu partition. Recently I had to reformat my Vista partition and now I don't have the ability to access my Ubuntu partition. What should I do?
View 1 Replies View RelatedHave just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
I've upgraded from 9.10 to 10.04 and everything works fine but. I use skype (2.1.0.81) a lot and I can make calls and receive them as normal with normal mic/sound levels. When I get a notification the sound is so faint its almost inaudible. Clicking "Test sound" in notifications has the same effect - almost inaudible sounds (I thought they were not working at all until I turned the volume right up).
I tried completely removing and reinstalling skype through synaptic to no avail. All the Sound devices in skype are set to "PulseAudio Server (local)" - there are no other options coming up. "Make a test call" works fine and the skype sounds are all at the expected level. Real calls are fine too, so long as I notice them and respond. "Make a test sound" is silent.
Likewise, testing the event in Notifications plays the sound really quietly. Allocating different sounds makes no difference - the level is still really low so I can't work around the problem that way. Anyone know how I can correct the ringer volume without blowing out my eardrums on an actual call?
Today I upgraded from 10.04 to 10.10 and I notice that the rename function is different from before.
Now it select all the filename including the extension while before it select only the filename. How can I fix this problem? It's very uncomfortable rewrite the extension everytime or remove the extension from the selection.
I upgraded from 9.10 to 10.04 without any visible issues. But after a few days system started to behave strange - first it shows the message that gnome-power-manager is not correctly installed on login screen. The it wasn't able to log in even - so I found that problem might be that it shows not enough space on the root partition.This is really strange for me - I do not have any special data there.
See what I have after df command:
/dev/sda2 9614148 8618864 506908 95% /
none 1024128 360 1023768 1% /dev
[code]...
Upgraded two systems yesterday without problems but now have a strange problem with a third. The upgrade went well I think but the kernel hasn't upgraded. Its installed and grub.conf has it listed as the default but after a reboot ( many times now ) the kernel version is unchanged.
View 13 Replies View Related
