Ubuntu Installation :: 9.10 - Restart Got Grub Rescue Prompt
Feb 6, 2010
I just installed Ubuntu 9.10 on hd1 - /dev/sdb1 at the end of the installation I chose to install grub at hd0 - /dev/sda1. The file system I chose was ext4 for ubuntu "/" - 50 GB,
ext3 for "/home" - 5 GB, and 1.5 more for swap. When the installation was complete I got the following prompt:
GRUB loading
error: no such disk
grub rescue>
>
There was nothing I could do, pressing TAB did not show me all the commands like grub is expected to. Typing 'help' did not show any commands as well, instead it showed me - "NO SUCH COMMAND" or something like that (I did not took note of what the output was). I believe the problem is in the grub loader - which was not really installed properly in hd0 - /dev/sda1 (which is FAT32 - windows)
View 9 Replies
ADVERTISEMENT
Jun 23, 2010
I tried to install Ubuntu as a dual-boot on my Windows XP machine, using the USB stick trial OS and automatic installation. My screw-up came when I left my external USB hard drive plugged in during the install, and as far as I can tell, Ubuntu was installed on that as opposed to my internal HD. Now when I try to boot, I get knocked straight to the grub rescue prompt with an error message that basically shows my "no such device (my external's ID)" -- assuming that the MBR (which I know nothing about editing) is trying to boot off the external that isn't actually enabled until an OS starts it up, and dumping me at the rescue prompt when it can't find it.
I can still load up the trial Ubuntu off the original USB stick (though can't get online with it without wireless drivers), but that's as functional as the computer gets right now. And I don't have a Windows Setup CD anywhere (using a rooommate's Mac at the moment with a terrible European keyboard on it). So is there any way to edit the MBR or something to tell it to boot my regular XP off my internal HD, at which point I can re-partrition and try this whole thing again, or otherwise remove the failed install of Ubuntu through the trial-stick or... well, I'll leave the suggestions up to you all. I've been working on this since about 4am last night and my brain is kind of fried.
View 3 Replies
View Related
Jun 19, 2010
So I had Ubuntu Server installed and I decided to make some new partitions using gparted via a live usb of Ubuntu desktop. And so I think messed up pretty badly. Ubuntu Server won't boot and I get the following error followed by a grub rescue promt:
Code:Diskette drive 0 seek failure
error: file not found grub rescue >
To me, it seems like some boot files may be missing if not the whole system. After I made the partitions, the live USB of Ubuntu was still working fine until I rebooted.So here is the bigger issue, I figured I would just reinstall everything all over again, but instead I can't.
View 6 Replies
View Related
Mar 28, 2011
i have a dual booting the first one being ubuntu 10.04 within which i have installed windows7.Unfortunately,i've formatted that part of my hard disk in which i've had ubuntu. Now my problem is i cant load into any of the two os and i dont want to loose my vital data in the system.I've tried booting using the live CD but in vain.i desperately need my info in my laptop.
View 3 Replies
View Related
Jun 2, 2010
Recently I messed up GRUB boot loader in my laptop installed with Ubuntu which resulted in grub rescue prompt. So I had to boot Ubuntu Live CD to get it fixed. Thought of blogging it, may be useful for some one.
This fix involves two steps. First one is to chroot into Ubuntu installation partition. Second one is to install the grub MBR (Master Boot Record). I am using Ubuntu Lucid 10.04 and Live CD also of same.
Continue reading here: http://karuppuswamy.com/wordpress/20...rescue-prompt/
View 1 Replies
View Related
Aug 8, 2010
Installed 10.04 on my daughters laptop from within windows Vista. All went OK but I had two boot loaders, i.e. turn on laptop and I would get the Windows loader asking if I want to boot in to windows or Ubuntu. Upon selecting ubuntu I would get the standard grub loader that I have on my PC. Did an update a few mins ago and it asked me to update grub which I did and as there was only one disk showing clicked forward. Now on reboot I have grub rescue prompt, no such device. Hard drive is a single 80 gig drive with windows on one partition and ubuntu in another. Have the live cd so can boot from that I guess. What do I do next?
View 9 Replies
View Related
May 6, 2011
I have tried to follow the different possibilites discussed here [URL]
But I am not getting anywhere.
Btw, this is not my screenshot. Mine shows GNU GRUB version 1.98-1ubuntu5.
View 9 Replies
View Related
Aug 13, 2011
When I try to boot I only get to the grub rescue prompt doesn't matter if I try booting from ubuntu 11.04 cd windows 7 disc or the hard drive. At the moment ubuntu 11.04 should be installed although it gave me a ton of errors as I installed it and as soon as i restarted the computer i got this prompt.
View 2 Replies
View Related
Jun 17, 2011
I had 250gb hard disk with dual boot, xp and ubuntu 10.10.Yesterday, i tried to upgarde my ubuntu 10 to 11 from a live cd....b4 doing so, i used a win software EasyBCD to fix the mbr but it didn't work properly..and i ignored it(my biggest mistake)and deleted the ubuntu partion from the windows device manager. It just displays "Booting from Live CD" for few minutes and again displyas the same above error.What should i do now?Its ok if i m not able to recover my data back...i hv sycnd my docs on the internet.
View 9 Replies
View Related
Aug 2, 2010
After lots of searching last night I noticed that over the last couple of days there have been quite a few posts of people receiving the error: no such device lots of numbers grub rescue>. I have a dual boot vista/ubuntu setup with ubuntu on my d: drive and windows on my c: drive and it happened to me last night. So after my freaking out when I received the grub rescue> error after updating somethings in my ubuntu install and restarting. Once the computer rebooted bam! error. after much freaking it only fixed itself by reinstalling the windows bootloader via the vista rescue disk I was wondering if there was a way to prevent this from happening again? will ubuntu attempt to "update" itself again?
View 5 Replies
View Related
May 13, 2011
Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 1 Replies
View Related
Jan 18, 2011
I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked
- i did the windows cd fixmbr trick, not worked
- reinstalled debian with fixmbr the first step and nothing
- tryed deleting with dd the mbr, not worked
- reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
View 14 Replies
View Related
Jan 15, 2011
So I wanted to get rid of ubuntu 10.10 on my HP pavilion dv6 laptop as I wanted to make some hd space. Its a dual boot with windows 7. I deleted the ubuntu partition and expanded the windows partition to fill the whole hard drive again. When I restarted my laptop I got the "error: no such partition. Grub rescue>" message.
I tried inserting my ubuntu 10.10 boot cd but whenever I boot from the cd I get the exact same grub rescue error. Is it possible to remedy this situation from the error? I am currently unable to download a windows recovery cd so I'm stuck in the grub rescue page unless its possible to fix this mess from the error prompt.
View 9 Replies
View Related
Dec 26, 2010
Have installed ubuntu on a separate partition on single hard disk and system initially worked on a dual boot basis with windows xp. However after installing most recent series of updates computer is failing to boot.
Error message is 'error : no such device : 6937cabe-f115-455b-a248-6f8d46f80682.' prompt showing is 'grub rescue>' am now unable to access either windows or ubuntu.
View 3 Replies
View Related
May 16, 2011
I was dual-booting Ubuntu 11.04 just fine for about the last week but then ran into some issues and decided to reinstall Ubuntu. Now after the install I get this error: error: nu such device: d38af2a9-740e-4d3c-b267-2a3848e5d319 and it goes into the grub rescue command prompt screen. I have tried to reinstall Ubuntu about 6 times now, complete installs. I have tried changing boot priority multiple times. I installed off a thumb drive and left the thumb drive in after install, took it out after install.
View 9 Replies
View Related
Mar 12, 2011
I'm having a issue. It first started a few nights ago, and after booting from the live cd and reading around, I saw it mentioned somewhere that it might help to update GRUB. I did this using sudo update-grub. This took care of the issue, with an unexpected, but not altogether unwanted result: instead of having to choose a temporary boot device to boot on to the external drive Ubuntu is on, I got a grub menu which showed the the OSs for both HDDS. I thought all was fine, but a few days later, same thing. Updated grub again, and all was okay. Tonight, it happened again.
When I try to update grub now it says:
Code:
ubuntu@ubuntu:~$ sudo update-grub
/usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).
Here's the result of the boot info script.
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for (,msdos1)/boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb .....
View 7 Replies
View Related
Apr 13, 2011
Just did a full install of the latest version of Ubuntu. I've got a high-end alienware m17x laptop with dual SSD drives in a raid array. Ubuntu installed fine, but when I reboot, I get to a grub rescue prompt and it never gets to desktop. I'm booting from the liveCD while I try to figure out how to fix it.
[Code]....
View 9 Replies
View Related
May 13, 2010
i have dual booted ubuntu with windows. but after a few days i realized that ubuntu was too slow for my system and then decided to uninstall it and planned on installing it later. So i deleted the partitions on which ubuntu was installed. I rebooted the system and the grub rescue promt appeared, i already knew the work around was to restore the windows MBR using the live cd i used to install ubuntu or the Windows installer. But the main problem is my DVD suddenly stopped working . So my question is, can i boot windows using the promt? is there any commands? or can i uninstall grub using the rescue promt?
My desktop has been down for more that two weeks
Ubuntu version: 10.04
View 2 Replies
View Related
Oct 24, 2010
i am a newbie to linux and i am stuck at the GRUB rescue prompt at the startup.i have dual boot windows and Ubntu 10.04.I want to remove GRUB2 from Harddrive itself.can u suggest ant command on GRUUB recue prompt ?
View 5 Replies
View Related
Oct 26, 2010
I have two hard-drives. The first, C: (sda1) has Windows 7 x64 installed on it. The second hard-drive, D: (sdb1), was partitioned when I installed Ubuntu 10.04 into two separate partitions: NTFS and Ext3.
I wanted to remove the Ext3/Ubuntu partition and reclaim that space (i.e. completely remove Ubuntu). I did NOT install using Wubi. I booted up Win7 x64, went into Disk Management, right-clicked the D: partition corresponding to the Ext3 filesystem (shows up as unrecognized in Disk Management), and opted to delete the volume. I then right-clicked on the NTFS D: partition, and opted to Extend the Volume to reclaim the previously partitioned space.
When I rebooted, I ended up with the following error:
Code:
error: no such device: f81368be-ea53-43d2-b8de-bb52b5ac322c.
grub rescue>
I cannot get beyond this screen. Rebooting always puts me at the grub rescue prompt. I have looked at the HOWTO: Purge and Grub Rescue Prompt threads, but was not able to understand the instructions and am therefore asking for your help. However, I was able to install the boot script as those threads suggest, and here is my results.txt:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for /boot/grub.
[code]....
View 6 Replies
View Related
May 26, 2011
I dual boot Windows 7 and Ubuntu, and recently I updated from 10.04 to 11.04 via live cd. However, I now get the grub rescue prompt instead of the normal grub menu when I boot my computer.
View 1 Replies
View Related
Apr 17, 2011
I have a laptop with Windows 7, and about a week ago I installed Ubuntu 10.10 64-bit via LiLi USB creator. Worked beautifully, but I was having some issues with the brightness controls so I decided to get cute and upgrade to 11.04. So I downloaded the beta2 and used LiLi to make the USB (unsupported for that version of course) which used the same parameters as 10.10. I then tried to do a fresh install over the partition I had set aside for Ubuntu and had 10.10 installed on (~80 GB).
So in the installation itself, something got majorly screwed, and the entire system froze. Next thing I knew, I was rebooting and got the Grub Rescue prompt and no ability to load into either my old Ubuntu 10.10 or my new failed 11.04, or of course my Windows 7 partition either. The partition is obviously there, and as I only have one PC in my house, with no Windows 7 recovery discs, I currently cannot fix the mbr to just get my Windows back. I can of course get this in a couple days, but I'd like to be able to fix this without going to my parents.
[Code]....
Those are my partitions. /dev/sda3 is my Windows Partition, which I want to boot from. Only problem is, I'm not really sure where the computer is looking to find the boot record. I think it's from my fubarred /dev/sda4 partition which means it's basically looking nowhere. So I can't modify it to point to my Windows so I can just get back there.
View 7 Replies
View Related
Feb 12, 2011
I have two partitions installed on my computer, Ubuntu 10.04 (part. sda2) and Windows XP (part. sda1). When I restart my computer I get this message:
error: file not found
grub rescue>
I thought this must be a grub error, so I booteda Super Grub disk (v 0.9799). Then I tried to fix grub with the Super Grub disk, but I got this message:
Error 15: File not found
Booting 'not lucky'
pause SGD has NOT succeeded
SGD has NOT succeeded
I then booted the system using an Ubuntu live CD, version 10.04.I tried to repair the sda2 Ubuntu partition. At a terminal prompt I ran [code] sudo e2fsck -f -y -v /dev/sda2. This did not work. It ended with "e2fsck aborted". I could not repair the Ubuntu partition,
I tried to open the sda2 partition by running the terminal command [code] sudo mount /dev/sda2 /mnt. I received the following message:
mount: wrong fs type, bad option, bad superblock on /dev/sda2
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Using the ntfs-config program, I can easily mount the Windows XP partition (sda1). It mounts and I can read or write the files on the Windows XP partition. So at least Windows XP is not damaged. I downloaded and ran the boot info script, and here are the results:
Code:
Boot Info Script 0.55 dated February 15th, 2010
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for /boot/grub .....
View 9 Replies
View Related
Aug 27, 2010
when it comes to linux, but like the idea and hope one day to get away from microsoft all together. This is the second time I have tried to install ubuntu on my eeepc 1000HG in addition to windows 7. The first version was karmic koala netbook remix, and yesterday it was lucid lynx netbook remix. Its annoying because before the update packages are downloaded and installed it runs smoothly, even additional applications run with no problem, but after restart to complete installation the following error message appears.
error: no such device: 5290ea6f-1bdf-4eda-b56e-2f282662e188. grub rescue>
View 9 Replies
View Related
Oct 30, 2010
I had a problem with my grub (system displayed "unknown filesystem" and then the grub rescue prompt). I then used a livecd of ubuntu 9.04 and ran fsck for a while (closed it in the middle). Grub then worked. But when i select ubuntu 10.04 it goes to the purple screen and stops there. There's some error before loading the purple screen.
View 1 Replies
View Related
Aug 29, 2010
I am having trouble booting.I am getting the "grub rescue" prompt on my screen.I went through the forum and found a script to run to check my system and the contents of the txt file are as below: how to send the large txt file which is not possible in this post.I am currently sending only part of it and will send to your email when I have your contact details.
============================= Boot Info Summary: ==============================
=> Grub1.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #9 for /boot/grub.
=> Grub1.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for .
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/bcd
View 9 Replies
View Related
Jun 10, 2011
I have installed Ubuntu 11.04 on my desktop. When prompted to restart after installation, I select Ubuntu (not recovery mode) at the prompt and Ubuntu will not start. All I get is a big bright purple screen which does nothing. I have read some forums that suggested that setting the partition space was wrong and to try to reinstall it. I have tried to reinstall it but I do not get the option to adjust the partition at all. I did the first time I installed it but never saw it again. It just goes right through the installation process and asks me to restart. I again, select Ubuntu and I get another very brightly colored screen. I am trying to use it as a dual boot. I have Windows 7 right now and it works just fine. I have no idea what to do now. I also do not get any error messages. If there are any, they pass way to fast for me to see them.
View 7 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Apr 11, 2010
First the hard data:
Upgraded from Ubuntu 9.04 to 9.10 via upgrade manager
System is AMD 64
Have dual boot with XP on seperate hard drive
[code]....
Then the wheelspin:
Seem to have knocked out GRUB as normal loading screen does not appear anymore.
Worse, I think I accidently installed grub to something labelled SDC5.
Cannot get anything except the "grub rescue" prompt. I'm not sure if using the LiveCD (9.10) can help. Have tried a few prompts from other threads but just ended up with mud splattered all over the place. I'm gathering I need to load grub, but can I do it using any grub rescue commands?
View 9 Replies
View Related
Jun 29, 2011
I am wondering how to add a need to restart notification in a Debian package, so upon installation, it'd pop up something to tell the user to restart the computer for changes to take effect. Perhaps something like what happens with some packages through the update-manager when it prompts the user to restart for the changes to take effect.
Is there any way to do that? Perhaps adding something at the end of a "postinst" file?
Thinking about it, I could just add something like this at the end of the "postinst" file:
Code:
notify-send -t 86400000 -i /usr/share/icons/gnome/32x32/status/info.png "Please restart the computer for all changes to take effect."
It'd work, but not as well. For instance, if the person isn't by their computer at the time.
Another option could be using a Zenity dialog box. That might work. Though, if done, wouldn't a yes/no question box keep the actual package from technically finishing until the user would select yes/no to restart?
View 6 Replies
View Related
