Ubuntu Installation :: ATI Driver Not Working?
Jan 2, 2010
I am using my ATI Radeon 9550 display card but just can't adjust it to 1920x1080 resolution in ubuntu 9.10. I can't even start ATI Catalyst Control Center and i believe there is something wrong with the driver. When i try to start ATI Catalyst this message pop up "There was a problem initilizing Catalyst Control Center Linux edition. It could be caused by the following. No ATI graphics driver is installed, or the ATI driver is not functioning properly. install the ATI driver appropriate for you ATI hardware, or configure using aticonfig."
Everything works fine in Ubuntu 8.10.
View 3 Replies
ADVERTISEMENT
May 1, 2010
i have just installed Ubuntu 10.04 LTS on my Dell XPS M1530. Previously, i got the bcmwl proprietary driver to work when i was trying the live cd. for some reason, when i installed it however, it did not work the same. when ubuntu booted when i installed it, it did not sense the proprietary driver. so i went in to the ubuntu disc itself and got the bcmwl driver and the dkms packages. so i try to install both of them with dpkg -i as root. dkms installed successfully, however, the bcmwl driver gave me this:
root@Ryan-PC:/home/ryan/Desktop# dpkg -i bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu3_i386.deb
(Reading database ... 122807 files and directories currently installed.)
Preparing to replace bcmwl-kernel-source 5.60.48.36+bdcom-0ubuntu3 (using bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu3_i386.deb) ...
[Code]....
View 4 Replies
View Related
Nov 1, 2010
I recently downloaded and installed Ubuntu 10.10. I thought it was awesome...still do. OK, the problem is i was prompted to install some proprietary drivers and so i did but thats when the problems started. After reboot i couldn't get the GUI or gdm (not sure what to refer it to) to work. It goes directly to a terminal screen every time so i actually reinstalled Ubuntu and tried installing the drivers all different ways but no luck. i also can get into recovery mode and do low graphics. the driver version im trying to get working is nvidia 260.19.12. my graphics card is a geforce 7 series cant remember the number i have a 32bit processor.
View 9 Replies
View Related
Jan 12, 2010
I just got my new ubuntu 9.10 os desktop version installed into my lenovo laptop but then my WiFi is not working. Previously I had a broadcom driver which currently is not functioning with the ubuntu 9.10.
View 2 Replies
View Related
Oct 12, 2010
Recently i installed Maverick on my studio 15 laptop
It frequently hangs.Nothing works and i have to restart manually Is there any other way to restart Why is it hanging frequently?
Also i installed ati radeon drivers using additional drver bundled with Maverick.
After installing it shows d driver to be workinng fine
But while opening Ati catalyst control centre it says d driver isnot installed
how to solve it
View 1 Replies
View Related
Sep 18, 2010
I installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended
Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.
I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�
I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.
View 3 Replies
View Related
Jan 18, 2009
In lmms there is no sound and it says:
No audio-driver working - falling back to dummy-audio-driver
in the command prompt. Sound works everywhere else just not lmms.
View 3 Replies
View Related
Jan 23, 2010
I just deleted my windows XP and installed Ubuntu 9.10 earlier this morning. I used wired connection to get drivers for my wireless network card.
When I did lspci, the very last line states:
Network Controller: Broadcom Coporation BCM4311 902.11b/g WLAN(rev 01)
I used the System -> Administration -> Hardware Driver and found 2 drivers. I have tried them both to connect to my D-Link Router. Neither of which worked.
For Broadcom B43 Driver, the wireless is able to detect wireless networks. However, it fails to establish connection.
For Broadcom STA Driver, the wireless cannot even detect wireless networks available.
What is the issue here and how do I resolve it so that I am able to connect onto the internet wirelessly?
View 9 Replies
View Related
Jul 29, 2010
Since the last driver error I had posted the thread was starting to drift WELL off the original issue so now I am opening a new thread since it IS a whole different problem in general;So, I was having issues with my driver not being enabled. After I installed it manually it appeared to be correct how-ever when I ttried to enable special effects, and compiz, it didn't work.And even after a correct installation of the driver some windows when they pop up look like static then appear.Graphics card is an:nVidia 6150SE onboard card.I know it can handle compiz, and effects, because it did before on the other version of ubuntu I had.
View 5 Replies
View Related
Nov 17, 2010
Pretty self explanatory, I can't get the NVidia driver to work with my laptop's 310M. And yes I have tried both steps in .64&postcount=9, but to no avail. The two error messges I'm seeing are "(EE) No devices detected." and "Fatal server error: no screens found".
View 3 Replies
View Related
Feb 16, 2011
Was having an xorg problem earlier now resolved but now the screen is extremely unstable and bouncing. I checked my ATI Fire GL driver and it is installed and working fine.
Is there a CLI I can enter and see the issue or perhaps 10.10 and my drivers are conflicting?
EDIT: I see in synaptic I have nvidia drivers and something called a nouveau display driver. Can I remove those since I run an ATI card?
View 3 Replies
View Related
Sep 1, 2011
I've got a friend who, after experiencing the horrors of Vista and me telling of the wonders of Linux, decided to switch. However, her Wifi is not working. I typed in 'lspci -nn', and it seems that two things came up; a Broadcom BCM4401 and an Atheros AR2413. Does the computer have two Wifi cards? Which do I need the driver for, or both? Which brings me to my second question; where do I find and how do I install a driver?
View 7 Replies
View Related
Nov 4, 2010
just upgrade from F13 to F14 and i got this error messager is startup
Quote:
ImportError: /usr/lib/python2.7/site-packages/ixf86configmodule.so: undefined
symbol: xstrtokenize
and from /var/log/Xorg.0.log
Quote:
(II) LoadModule: "fglrx"
dlopen: /usr/lib/xorg/module/drivers/fglrx_drv.so: undefined symbol: savedScreenInfo
(EE) Faild to load /usr/lib/xorg/module/drivers/fglrx_drv.so
[Code].....
View 2 Replies
View Related
Feb 24, 2010
how would i connect to the Internet in Ubuntu with the Intell 3945AGB driver? I can't find anyway to do this.
View 9 Replies
View Related
Jun 7, 2010
I'm using a Dell with Broadcom bcmwl6.inf driver. I tried the guides using ndiswrapper, but they didn't work for me. What worked was simply going to System -> Administration -> Hardware drivers and activating the Broadcom STA proprietary driver. That sounds great, but every time I restart, I have to remove and install the driver from Hardware Drivers.
What should I do to keep the driver loaded and claimed at the start. This is my lshw -C network before and after removing and installing wireless card driver.
[Code]...
View 3 Replies
View Related
Aug 23, 2010
My problem started with the following post.[URL]I ended up tracing the issue back to openGL that disappeared during an update and the nvidia driver had broken. The only remaining issue is that the 3D acceleration on the NVIDIA (GeForce 8600 GT) card will not activateURL]hich I have done many times now. I am now on the nvidia-173 driver as that one seems to be working the best. Even the nvidia-settings is having trouble and crashes when I try to look at the OPENGL/GLX information.I have found many instances of jockey showing that the driver is "active but not in use" which is what I am seeing. The problem is that the 3D acceleration is not working and the issue seems to be the driver.
View 6 Replies
View Related
Oct 4, 2010
when I updated from 10.04 to 10.10 beta, I lost my wireless on my Gateway MX3410 laptop. In 10.04, the wireless Realtek RTL8185 card was auto-detected, worked with the default driver.
So I installed the linux driver version of Realtek RTL8185. Although the driver shows up in the "Additional Drivers" panel under "Administration", the computer is not recognising the driver.
Below is all the specs of the current situation.
Gateway MX3410 Computer
OS: Ubuntu maverick (development branch)
2.6.35-22-generic x86_64
lspci:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
lsusb:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
View 2 Replies
View Related
Nov 11, 2010
I upgraded to 10.10 from 10.04, and I noticed that the nvidia driver are not working all well as they did before.
Although I get the nvidia logo when X starts, the 3d part does not work well. For example using mplayer -vo gl does not work anymore. When I type glxinfo I get the x error of failed request badwindow message. More anonyingly flash will crash when going to fullscreen.
The 2d part of the drivers seem fine because xvinfo and -vo xv works fine.
View 1 Replies
View Related
Nov 26, 2010
I used Gefoce9400GT , 190.53 nvidia driver, configuring Mulitiple X screen both CRT and TV, work fine if CRT and TV connected to card, but I hope foce TV-out output signal, means that if not connected to TV, the SVIDEO can output signal. Because the line too far, cannot detect TV connection, so I think foce output TV-out signal. I used Option "ConnectedMonitor" "CRT, TV". Can force found 2 display device, have 2 screen ok, but not display at TV if not connected TV. I do not understand why the TV has been forced output signal does not display images, they can be connected to the TV show?
View 2 Replies
View Related
Jan 9, 2011
I installed the proprietary driver in System->Administration->Additional Drivers, but after installing when I am required to restart, I restart my computer and encounter a black screen. I tried using Ctrl-Alt-'-" to change the resolution but that didn't work because the computer is completely frozen, so I have to reboot in recovery and uninstall the driver...
This also makes it so I am unable to go to the maximum resolution my desktop can obtain. (1920 x 1200, but I'm limited to 1600 x 1200)
View 1 Replies
View Related
Jan 24, 2011
I just bought a Lenovo B560, everything working except the Broadcom 4727 wireless (only in terminal it works)
View 4 Replies
View Related
Jun 17, 2011
I was trying to get the b43 driver work with my broadcom bcm4322 wireless card. I changed the kernel from 2.6.32 to 2.6.38 in order to make the b43 driver to work. When I booted with the new kernel the internet stopped working so I looked for a solution. I don't remember which website I went but it said that I have to re-install the STA drivers so I did that and rebooted and nothing happened. I decided to go back to the 2.6.32 kernel and re-installed the STA drivers. The wireless card (eth1) isn't showing when I run the command iwconfig
Code:
xavi@xavi-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
easytether0 no wireless extensions.
xavi@xavi-laptop:~$
I'm currently running Ubuntu 10.04 Lucid Lynx
View 4 Replies
View Related
Jun 19, 2011
I can't get my Lexmark printer (X1270) working on Ubuntu. I've trawled google and all the posts are a few years old with broken links to drivers. Does anyone know how to get an X1270 or a general printer driver for lexmark working?
View 3 Replies
View Related
Jun 30, 2011
i have recently installed ubuntu 11.4 on a macbook pro, i did this because mac osX would not work at all, even after takign it to the apple store they could not fix it. so i decided to help my friend installing ubuntu. everything works other then the wifi driver. broadcom sta wireless driver it says that is test by ubuntu devolpers but when i try to activate it i get an error that says: installation of this driver failed.
View 1 Replies
View Related
Mar 7, 2011
recently switched from Ubuntu. But I'm finding it difficult to get my wireless card working. It's a Dell Wireless 1395 Wlan Mini card, but works with a broadcom driver(Ethernet card is a broadcom).
View 2 Replies
View Related
Aug 29, 2010
In my laptop on Linux(Ubuntu) platform the Wifi driver is not working so.. What should I do ?
View 2 Replies
View Related
Oct 6, 2009
I had to have the Nvidia Driver build a module to my kernel. It goes through, says it was successful, but I an unable to start X and get this log:
Quote:
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.6.el5 i686
[code]....
Its an Nvidia 8200 integrated graphics card... Not sure if there is a wrong driver or the driver is in a different location then where Fedora is looking.
View 8 Replies
View Related
Jul 12, 2010
When I freshly installed my Ubuntu 10.04, broadcom wireless worked after I installed the driver using hardware manager. But somehow it got de-activated, and not its not working. I need help related to that. Here is some output which might help you to understand the problem.
Code:
paras@ubuntu:~$ sudo lshw -C network
[sudo] password for paras:
*-network DISABLED
description: Wireless interface
[code].....
View 7 Replies
View Related
Oct 2, 2010
I applied the latest updates today and when I rebooted, My wireless broadcom driver is not working and the ifconfig does not list it either anymore, was working 8 min ago but is now dead. If I turn off the wireless with a switch and back on, I get a blue light but it remains disabled and greyed out on the network icon. Ubuntu 10.04, latest updates applied daily. I removed the driver and reinstalled it, it did not help at all. Also, my Truecryt gdecrypt stopped working.
Update: it seems the wireless switch on the front of the laptop is now working backwards, in checking the daemon log I found Turning off the wifi so the light goes out:
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> WiFi now enabled by radio killswitch
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> (eth1): bringing up device.
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> (eth1): supplicant interface state: starting -> ready
[code]...
Update, I found that if I boot the laptop up with the networking switch off, then, after I'm booted up, turn it on, it works. However if I reboot the laptop with the network switch in the on position I get the above issue with the switch being inverted and not working properly.
View 2 Replies
View Related
Feb 12, 2011
I'm trying to get a fresh install of Ubuntu 10.10 working with the closed Nvidia driver, as I would like to get the HDMI output working.
I have a Sony Vaio VPCCW18FX, with a Nvidia GT 230M graphics card. The open source nouveau driver works fine, but does not run smoothly. The only problem here is that it's needed to run with "nomodeset".
If i just activate the Proprietary Nvidia driver and reboot, it will hang after writing "Checking battery State [ok]". I have tried to add EDID from Windows partition, and here it hangs at a blank black/grey screen. I have tried hooking up an external display, no output on it either.
View 9 Replies
View Related
