Ubuntu Networking :: Wireless Driver For 11.04 Not Working
Sep 1, 2011
I've got a friend who, after experiencing the horrors of Vista and me telling of the wonders of Linux, decided to switch. However, her Wifi is not working. I typed in 'lspci -nn', and it seems that two things came up; a Broadcom BCM4401 and an Atheros AR2413. Does the computer have two Wifi cards? Which do I need the driver for, or both? Which brings me to my second question; where do I find and how do I install a driver?
Before I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
I cant seem to get my wireless driver working i did install ndiswrapper and i downloaded my driver and i installed it with ndiswrapper but it is still not working.
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
recently switched from Ubuntu. But I'm finding it difficult to get my wireless card working. It's a Dell Wireless 1395 Wlan Mini card, but works with a broadcom driver(Ethernet card is a broadcom).
I have a Rosewill RNX-N150pc wireless card that's been working great with Suse 11.2. But with 11.3, it's able to scan for my wireless network, and I see RX/TX packets moving, but DHCP isn't able to get an address. I've tried the 2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0 and 010_07_16_RT3062_Linux_STA_v2.4.0.0 drivers from the Rosewill site, and the rt3562sta-kmp-desktop-2.4.0.0_k2.6.34.0_12-1.1.i586.rpm package from Suse, all with the same result. I've even tried forcing an IP address on the interface with 'ifconfig', so my current guess is that the WPA-PSK security isn't working.
I want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
For some reason, i just cannot get my wireless to work in xubuntu. When i click on the network-manager applet, it only has the wired network tab and VPN connections, there are NO wireless networks displayed. I have also tried iwconfig, which returned
lo no wireless extensions. eth0 no wireless extensions. and lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
I can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
I have a compaq nc6400 with the intel Pro/Wireless 3945 ABG card. It fails to find any wireless networks.the IWL3945 driver was installed automaticallyBut when searching for networks none are found, even though on any other computer in the house the network is found.According to https://help.ubuntu.com/community/Ha...sIntel#miniPCI
I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password: lo Interface doesn't support scanning. eth0 Interface doesn't support scanning.
I have the source code to create a wireless driver. This came with the cd for my adapter but i dont know what to do. btw while i'm in ubuntu i will not have a wired conection to the net seeing as my routers down stairs and i dont have a cable long enough to reach
Basically today (1st of june) about 1.30pm my computer updated. I was on facebook at the time and was commenting on a post but didn't click "Send message". My computer went onto screensaver, So I unlocked my computer to find my keyboard wasn't working (But it was ok on the password lock). I then thought that restarting my computer might help the keyboard to work. I restarted my computer and as it turned on, my wireless icon had an exclamation mark next to it ("!") I clicked on the icon to find that only "Wired network" was only displayed, Before the restart "Wireless network" was there but it had disappeared. I've looked into it, and it looks like my wireless driver has been unistalled by the most recent update on Ubuntu. As far as I remember the wireless driver was Broadcom for a hp pavillion zd8000.
I did a few things to the drivers and the wireless aspect of my ubuntu system and I'd like to know how would I reset everything back to as if it was a fresh install (but only regarding my wireless drivers and all that jazz)?
I'll have to purge it and then reinstall it over a wired network.
im on compaq presario cq40 (amd64 turion x2) and recently install ubuntu.10.04 using wubi with dual os.. im installed wireless braodcom BCM4312 802.11b/g LP-PHY 'bcm43xx-fwcutter_006-3_amd64.deb' driver for my laptop and restart my machine.. when i go to > hardware dirver, there is no driver installed.. any suggestion? or lists any driver compatible with my laptop..
I downloaded my linux wireless driver (realtek 8191se), but I don't know how to install it because there is no .exe file(like windows). It has a readme file which says :
"You can enter top-level directory of driver and execute follwing command to Compile, Installation, or uninstall the driver:
0. Change to Super User sudo su
1. Compile driver from the source code make
2. Install the driver to the kernel make install reboot"
as the majority of ubuntu 10.04 users I had problems with setting up wireless internet connection too. After reading many forum topics I somehow managed to set up the connection.Now the only problem is that when I restart computer wireless connection is no longer working. Each time I boot Ubuntu I have to go to System>Administration>Hardware Drivers, remove Broadcom STA wireless driver and then install it again. Otherwise the wireless connection is not working and under Broadcom STA wireless driver this message is written:
I am using Ubuntu 10.04. I installed the Broadcom STA Wireless driver from System -> Administration ->Hardware Drivers, and it seemed to work fine, but the next time I turned on my laptop, my wireless card wasn't recognized anymore! When I went to System -> Administration -> Hardware Drivers, the driver was gone from the list! Where did it go?Update - Solution:his is hardware issue, not a b43 issue.
I downloaded ubuntu on my wireless netbook my wireless network connection was not working so i checked on terminal and it said it was unclaimed meaning that ubuntu is not recognizing my built in wireless driver (hardware) what should i do becayse ubuntu could also not find the ndiswrapper?
I just upgraded ubuntu to 11.04 and I need to install the wireless driver again. I downloaded the driver and I am getting the following error when running make:
./kernelversion.c:13:30: fatal error: linux/utsrelease.h: No such file or directory compilation terminated. Makefile.inc:81: *** Cannot detect kernel version - please check compiler and KERNELPATH. Stop.
Here's what I already installed on my laptop trying to get it fixed.
Having difficulties configuring a driver for an Edimax wireless usb [URL]... I have downloaded the driver, and after make clean I am running into problems.When I enter make I get the following.
Code: make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.32-5-686/build M=/home/conor/rtl8192CU_linux_v2.0.939.20100726 modules make: *** /lib/modules/2.6.32-5-686/build: No such file or directory. Stop. make: *** [modules] Error 2
This worked ok on my Ubuntu 10.04 install on my desktop but it does not seems to be working on my Crunchbang 10 latest release on my laptop.
I used the System -> Administration -> Hardware Driver and found 2 drivers. I have tried them both to connect to my D-Link Router. Neither of which worked.
For Broadcom B43 Driver, the wireless is able to detect wireless networks. However, it fails to establish connection.
For Broadcom STA Driver, the wireless cannot even detect wireless networks available.
What is the issue here and how do I resolve it so that I am able to connect onto the internet wirelessly?
Put all Cisco drivers and firmware for wireless in a new ubuntu 10.04. I love ubuntu and I have a big problem with a mini pci wireless Cisco Airo MPI 350...
I have recently installed kubuntu 9.04 on my laptop. i then connected an ethernet cable and upgraded it to kubuntu 9.10. but i would like to connect to the internet using wireless. but i do not know how to install the windows wireless driver for my card on this OS. my card is: D-link AirPlus G DWL-g630.
