I just installed OpenVPN using apt, and it doesn't seem to have components which are distributed with the source, such as easy-rsa. Why would tools like this be excluded from the package? I prefer to use apt rather than compiling from source, to keep things neat and simple.
View 2 RepliesIm a total beginner when it comes cryptography and networking. Finally managed to create a connection with OpenVPN on Ubuntu to a vpn provider called ivacy. On this page:http://ivacy.com/en/doc/user/setup/winxp_openvpn they give configuration files and keys, which I used. The question is, if someone wanted to see my network traffic, could they do it using the keys provided on that page. Reading the OpenVPN documentation i saw that it is also possible to create your own keys. Would that be more secure?
View 10 Replies View RelatedI have a running proxy server that I wish to also turn into a VPN server.The VPN is not used so much that a user can access the network but is used so that they can obtain a geo specific IP address for their applications (the proxy server only does this for HTTP).I would therefore like to block off the VPN from accessing any of my Linux box's ports such as email, web server etc.Clients are given local IPs of 172.16.0.x.What should I take into consideration to block off clients from accessing dangerous stuff on the network?
View 4 Replies View RelatedThere dosent seem to be a guide for this...i can use pptp vpn on ubuntu-how do i use openvpn-a step by step guide would be really useful!!
The vpn provider i use is called 'hidemyass' vpn-anyone know if openvpn will work on ubuntu with this?
A couple of weeks ago I was using openvpn with a provider of PVNs on a home wifi network with no problems.I had installed openvpn using apt-get install and downloaded theopvn PVN files from the organization.erything worked fine.I would type sudo openvpn nameoffile.ovpn and then add my username and password during the installation process.However, when I try to do the same on an Ethernet network, the installation work fines (as above) and informs me that everything is connected (same as on the home Wifi network) but Firefox and all other software cannot connect to anything on the Internet.I contacted the organization who said the DNS was a problem and I needed to install resolvconf then modify each .opvn file using up /etc/openvpn/update-resolv-conf and down /etc/openvpn/update-resolv-confcauses the installation to hang because it does not like openvpn pointing to an external file.Irrespective of the problem I have with this "solution", previously I could use openvpn without modifying the .ovpn files. It just worked! I wonder if anyone knows why using the exact same configuration on an Ethernet network (which I have not used before with openvpn) is causing problems
View 4 Replies View RelatedI'm running Ubuntu 10.04 LTS as a VM in Hyper-V, and accessing it via VNC with a machine in the same broadcast domain. I'm using OpenVPN to connect to XeroBank. I have instructions for configuring iptables to permit establishing and using the XeroBank connection, while blocking all other traffic on eth0. I've followed them successfully. I need to also permit the VNC connection, and haven't managed that. FWIW, the VM is at 192.168.111.12::5900 and the workstation is 192.168.111.2.
The attachment to this post lists the recommended contents for each Shorewall file. Which files need changed, and what do I add to each?
I installed OpenVPN and gadmin-openvpn-server from the repos and I can't seem to activate the openvpn server in the gui. I have the server certificate generated, and all the information on encryption protocols setup, and accounts named and ready, despite accounts that were already there, such as www-data, bind, ossec, etc being listed. The server log states:
PLUGIN_INIT: could not load plugin shared object /usr/lib/openvpn-pam-auth.so: /usr/lib/openvpn/openvpn-pam-auth.so: cannot open shared object file: No such file or directory.
I use vpntunnel.se and followed their tutorial for OpenVPN and it connects and assigns an IP. However, once the sequence is initiated and I open my browser I cannot connect to a webpage and get a "cannot resolve" error. I e-mailed their support and they suggested I change the DNS of my network settings. I did that but the same problem. Once I close OpenVPN my internet works again. It works in windows, so I know it is not my router...I use a wireless connection with my router. I don't know if this has something to do with anything...
View 9 Replies View RelatedI tried installing VLC through Synaptic. However, i got the reply "all components could not be installed". VLC does not appear in the menus. All four software repositories have been ticked.
How can I install VLC?
I have a virtual private server running ubuntu server edition that I have set up as an openvpn client. The problem I have is that the moment I turn on openvpn, I am no longer able to ssh into the machine. Is there a way to enable me to connect to it even when it is tunneling?
View 4 Replies View RelatedI have to say, I'm a little astonished at how anxious people are to bypass password checks on networks, all for the convenience of having things come up automatically. But given the world as we find it, I'm seeking a different approach.
I have an OpenVPN network. It works fine, but for my laptop, I've selected a client certificate that requires a password, so that if it falls into nefarious hands, the thief will not have immediate access to the VPN.
I'm trying not to have any data at all on the laptop (yes, a waste of a 500GB drive). So I want the VPN up even before I log in through the GUI.
It would be nice if the boot-up sequence would pause for the openvpn start script to ask for this password. I see the script contains a line "# X-Interactive: true" which I understand from documentation is supposed to accomplish this. But it doesn't. OpenVPN simply fails to start, which is better than the alternative, but a pain.
I have already disabled the splash screen (having been around Linux for over ten years, I am more comfortable seeing boot-up messages anyway, though even on this x86 they flash on so quickly I'm not sure I'm really gaining anything).
What am I missing?
Why is that certificates need to be revoked with openvpn?I simply removed them from the keys folder but everytime the client connects it just places the certificates back into the keys folder itself?! Should that be possible?
Secondly, I have a problems etting the revoke command.Is there a known setting on the openssl.cnf file that might cause this?
[root@server]# source ./vars
NOTE: If you run ./clean-all, I will be doing a rm -rf on /etc/openvpn/easy-rsa/2.0/keys
[root@server]# ./revoke-full client2
Using configuration from /etc/openvpn/easy-rsa/2.0/openssl.cnf
error on line 282 of config file '/etc/openvpn/easy-rsa/2.0/openssl.cnf'
21368:error:0E065068:configuration file routines:STR_COPY:variable has no value:conf_def.c:629:line 282
code....
I used
Quote:
sudo apt-get install eclipse
to install But I am not able to find the Java EE components is there a another step that I should do get Enterprise components installed or is there a different command
I recently brought home an old Compaq server from work. I was told that it works fine. When I brought it home, I tried installing Ubuntu 9.10 server from a cd. While it's trying to install, I get the message "Installation step failed. An installation step failed. You can try to run the following item again from the menu, or skip it and choose something else. The failing step is: Load installer components from CD." I turned off the computer and tried it again several times. Each time the same message appears.
View 5 Replies View RelatedI have an old desktop I've been working to put back together and get working. When I took it apart I was under the assumption there was a problem with the mobo. Now I've begun to question that (the information that led to that belief was very slim).
I'm looking online right now but if anyone knows of a Linux distro I can use to diagnose/ check hardware in that machine. Something that runs live would be preferable. I'm thinking knoppix and am reading about it right now.
trying out the new Opera 11 browser in Ubuntu, but when trying to use unite feature i am unable to install the components required for it to work.
View 1 Replies View Relatedi am trying to install ubuntu from an SD card, i can run it from the card, and everything works fine, all but the install. i get to step 3 of 6. when pressing forward i get an error message ubiquity.components.partman failed exit code 141
View 1 Replies View RelatedI am re-installing Ubuntu onto my desktop PC which has Windows 7, openSUSE 11.2 and Fedora Core 12. First I tried Ubuntu 9.10. Near the end of the installation the machine reboots and the monitor shows the following message:
"Ubiquity.components.partman failed - Exit code 10. Further info in /var/log/syslog"
Tried again with Ubuntu 10.04 beta2 with same problem.
How can I view and read /var/log/syslog if Ubuntu fails to be installed and therefore I cannot access this log?
I have an HTPC that was giving me insane amount of problems after 3 months of good use.
1x 250gig Samsung Drive (OS Drive)
3x 1TB Western Digital Caviar Green (Raid-5)
In 9.10, the raid was working fine. I decided to fresh install Ubuntu 10.04 and I can't seem to start the raid array. In Disk Utility, the array shows up but when I try to start it I get the error "Not enough components to start the array"
I've tried to assemble the array using mdadm and the following:
mdadm --assemble /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdd1
This returns the following error mdadm: failed to create /dev/md0
I have no idea what to do now, and unfortunately I don't have any backups
Within the documentation of example OpenVPN setups there is a setup that shows an OpenVPN Server with two network interfaces. One interfaces is plugged into the public internet network and the second interface is plugged into the private network.
Normally I assume that it would be best to place the OpenVPN system inside the network behind the router and firewall and open only the ports needed on the router to allow access to the OpenVPN system. All other router ports would be closed. This is the first example they show. To see what I am talking about see page(s) 6-7 here -> [URL]
If one were to use the two interface public facing setup, when would that setup best be justified? I guess if you didn't want to open any ports on the router/firewall then this could be justified but then you have to lock down this public system individually instead of having it protected by the network firewall.
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
I am trying to install Fedora 12 x64 on my 27" iMac 10,1. I have tried both the installation dvd and the gnome live cd (both x64 i did not try the x86). On the installation dvd I get as far as the menu giving me the boot/install options - I have tried to install both with a basic video driver and the regular install/upgrade option - both times it begins loading components for the installer program (/sbin/loader) etc. After it loads sbin/loader and mounts the partitions it freezes with half the screen being the terminal txt beforehand and the other half being just a standard fedora logo w/blue background. It is not much different when I try the live-cd the only different is it does the exact same thing when the timer for automatic login is done. Any possible command line arguments that I could use to stop the graphical corruption?
View 2 Replies View Relatedi have installed openvpn and config it for a tunnel. my server.conf and client,conf is as follow:
server.conf
port 1194
proto udp
[code]...
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
I went from 32bit Ubuntu 9.10 to 64 bit 9.10 So, originally I had 3x1500 gig hds in RAID 5 (mdadm) worked fine. Now I installed Ubuntu 64 bit, but when I go ti Disk Utility, it sees the previous RAID array but says: Not running, not enough components to start. ALl the hard drives show themself Can you not do 32bit to 64bit or something...?
View 1 Replies View RelatedI have problem in installing openvpn I get this error:
[Code]....
It's been a while since I meant to resolve this emacs-related issue when installing basically any package.
Since I really need network-manager-openvpn, I decided to finally try and ask.
This is a known bug I believe, with no fix if I understand well. My question is: is there a way to go around it (instead of fixing it)
Here it goes : when installing a package (in this case, network-manager-openvpn), emacs gets in the way like this:
Code:
And the package is not installed.
I have already tried uninstalling emacs. Doesn't work...
find the manuals of my PC is not an option. I would like to know if there's an app that told me what's inside my computer. I know some of the parts, but others like the MB I can't remember the exact model. I know there's lots and lots of dust as well .
I think ubuntu comes with one app like that preistalled but I should have deleted it because I just can't find it.
I lost my networking components: network, network-manager, and so on that I cannot restore it from the Internet.
How can I restore my networking components?
Can I use the LiveCD or what is recommended?
I've been compiling stuff with the usual ccmake . make and make install for a while now, but now I'm starting to compile suites of applications, such as Calligra (Koffice). Is there any easy way to have the compilation spit out several .debs for the various components?
View 1 Replies View Related