Ubuntu Installation :: Nvidia's Installer - Keep Getting "The Distribution-provided Pre-install Script Failed"
Aug 15, 2010
I have never in my life got this to install correctly. No the recommended drivers dont seem tow work well for me so I want to install the drivers properly from the website. Something that people have said solvs many problems. I keep getting "The distribution-provided pre-install script failed! Continue installation anyway?" Anyways here is my log.
Quote: nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Sun Aug 15 15:34:52 2010
installer version: 256.44
[Code].....
View 9 Replies
ADVERTISEMENT
Jul 28, 2010
Re: nVidia latest Drivers - im trying to install a 9800gt nvidia graphics card on my ubuuntu i have been reading forums for the last 5 days and still no luck i managed to do a install and it is giving me the following errors distribution pre install script failed install failed /var/log/nvidia-installer.log unable to load kernal module 'nvidia,ko,
View 10 Replies
View Related
Jul 2, 2010
HDD with four partitions: Three DOS bootable primary partitions are located in the head, and the residual extended partition is divided into several logical drives.
1st trial: 10.04 installer recognized the last largest logical drive for system installation, but installer truncated the extended partition, and created the "terrible" 5th primary partition at the end of the HDD. GParted and other utilities cannot access to this 5th primary partition. (So, I restored the lost partition table on the HDD manually by MBM. But several OS were broken.)
2nd trial: To avoid making this "terrible" 5th primary partition, I located the largest logical drive for installation at not of the end.10.04 installer recognized this logical drive, but failed again.I tried GParted. but also failed to formating to ext4.Maybe, 10.04 installer failed at this formating step. Logical drives are not supported in 10.04 ?
View 9 Replies
View Related
Oct 16, 2010
Toward the end of installing Ubuntu 10.10 32bit (Alt CD) on my iMac 11,1, the installer asked me to type in the location for installing the grub boot loader.
I told it to use /dev/sda3 and it immediately failed. I'm still in the installer. Can anyone suggest a solution?
Here are my partitions on sda:
...from the shell in the installer, there is no grub.cfg in /target/boot/grub.
View 9 Replies
View Related
Mar 30, 2010
Is it possible to mod the installer from one distribution to another? For instance i prefer Mandrake's or Pardus's installer's partitioners to Debian's. They are graphical and seem to be more intuitive to me. I've reading up on Linux installers, and I think it would be really cool to could create a mash up of sorts, take the best of installers from each distro and make a new one. Or maybe port(there must be a better word), your favorite installer onto your favorite distribution. Imagine installing Debain via YALI
I know it'll take a lot of work, YALI is made using Python and Qt, d-i uses Gtk (for the graphical frontend to cdebconf). Besides, installers are among the most critical components in the whole setup, i mean a broken installer would mean lots of work for the users and consequently for the dev community. Plus the package management systems differ from distribution to distribution. I guess i am looking for thoughts on this, this isn't exactly a standard question
View 1 Replies
View Related
Nov 3, 2010
Due to some problems I have with the current nvidia driver in 10.10 I need to install the newest driver from nvidia using their installer. I do not have any problems with that. What I wonder is which packages I can safely remove when I use the nvidia driver from their site?
View 1 Replies
View Related
Feb 6, 2011
I'm trying to install stable Squeeze from HD "!! Scan hard drives for an installer ISO image. The quick scan for installer ISO images, which look only in common places, did not find an installer ISO image, but it may take a long time. Do full search for installer iSO image? [YEs} No kernel modules were found. This probably is due to a mismatch between the kernel Version available in the archive If you're installing from a mirror, you can work around this problem by choosing to install a different version of Debian. The install will probably fail to work if you continue without kernel modules"
[Code]....
View 1 Replies
View Related
Mar 6, 2010
I recently brought home an old Compaq server from work. I was told that it works fine. When I brought it home, I tried installing Ubuntu 9.10 server from a cd. While it's trying to install, I get the message "Installation step failed. An installation step failed. You can try to run the following item again from the menu, or skip it and choose something else. The failing step is: Load installer components from CD." I turned off the computer and tried it again several times. Each time the same message appears.
View 5 Replies
View Related
Aug 8, 2010
I've just installed Squeeze and try to install Nvidia drivers, but installer wrote that I have to disable Nouveau first. So could you please tell me how to turn off nouveau driver totally and correctly.
View 6 Replies
View Related
Nov 23, 2014
I am installing Whezzy and the installer failed to install grub on the MBR of /dev/sda
My disks are
- /dev/sda : the flash drive with the debian ISO
- /dev/sbd : a small SSD for the / partition (sdb1)
- /dev/sdc + /dev/sdd : a software RAID-1 array with LVM for /home, ...
Grub fails to install on /dev/sda which makes sense since this is the flash drive containing the Debian ISO so no MBR.
I already tried to run grub-update manually on /dev/sdb (with chroot /target grub-install --no-floppy --force "/dev/sdb" ).
It works but the system is not directly bootable. I had access to a second PC to read the grub documentation so was able to boot and to fix my system but this is annoying.
Is it normal to see my flash drive as /dev/sda? Could it be that my flash drive is incorrectly detected as a HD?
Is there a way to force the installer to install grub on /dev/sdb?
View 2 Replies
View Related
Aug 28, 2010
I try to install linux on hpc mini. Let's crack some keyboards. I have just bought a new pc: hpc mini compaq! I find windows Xp rather fine; but let's try linux. The PC has no cdrom, so, I cannot boot from any ISO of debian. I choosed testing netinstall, and followed the how to given on the debian website from another PC using knoppix iso cdrom. I did placed five files as shown here onto my pendrive as followed in one howto: I found 5 files for testing:
Code:
debian-testing-i386-businesscard.iso initrd.gz vmlinuz
and
Code:
26644480 Aug 28 17:44 ../squeeze-debian-testing-i386-businesscard.iso
with :
[Code]....
View 2 Replies
View Related
Jan 7, 2010
I can't find kmod so I'll go for the Nvidia installer from [URL]. I tried to run it Quote: su -c 'sh NVIDIA-Linux-x86-XYZ.AB.pkg1.run' but it wants me to kill xserver. How can I do that? " gdm stop" will kill Xserver too? How will I start it again?
View 3 Replies
View Related
Feb 17, 2010
I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"
[Code]....
View 9 Replies
View Related
Oct 13, 2010
tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
View 3 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Sep 2, 2010
Every where I look online, people are posting ridiculous non-working ways to upgrade their system from one release to another--they do not work for me and I need a definite expert reply. I am working with a fresh install of Debian Lenny/Stable and wish to upgrade to the frozen Squeeze distribution. Supplementing the word "squeeze" in place of "lenny" in my sources.list file does not work and believe this to be an inappropriate way of upgrading. I have tried upgrading apt, dpkg, and aptitude before beginning the upgrade process, cleaning dpkg cache, rebooting, etc.
After updating the above packages I tried all methods of upgrading: safe-upgrade, full-upgrade, and dist-upgrade. All produce dependency problems and try to remove the gnome-desktop package or upgrade everything else except gnome-desktop. (Other packages are also affected, gnome-desktop is the most important in this instance). As I understand it, when upgrading you can comment out the volatile repositories as well as the security updates, is this correct?--either way I have tried countless combination's off commenting/uncommenting to try to get the needed results. I do not want use sid repos or reinstall.
View 14 Replies
View Related
Jul 26, 2010
I am looking for official recommended web site to download and install MySQL 5.1 version RPM installation for 64-bit CentOS 5 distribution?
View 3 Replies
View Related
May 17, 2009
Trying to get the updates for my Nvidia card, there are 3 updates in the update manager, but it gives me this error if I try to update them: -
Code:
nvidia-newest-kmod-common >= 177.82 is needed by package akmod-nvidia-newest-177.82-1.fc9.2.x86_64
nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.19-78.2.30.fc9.x86_64-177.82-1.fc9.8.x86_64
nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.21-170.2.56.fc10.x86_64-177.82-1.fc10.2.x86_64
nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.19-170.2.35.fc10.x86_64-177.82-1.fc10.2.x86_64 : Success - empty transaction
View 2 Replies
View Related
Aug 31, 2010
I spent quite a lot of time jumping from one thread to another trying to fix a problem with my NVIDIA drivers in Lucid. I was getting the error message on startup: NVIDIA: Failed to load the NVIDIA kernel module ...Failed to load module "nvidia" (module-specific error, 0) No drivers available".
After a lot of trial and error, this is what worked for me (I have updated this thread following [URL]):
- Download the latest NVIDIA driver from www.nvidia.com/page/drivers.html
- In the terminal cd to the directory where you downloaded the driver package (e.g., $ cd Downloads)and make it executable (e.g., $ sudo chmod +x ./NVIDIA-Linux-x86_64-256.53.run)
- Edit blacklist.conf $ gksu gedit /etc/modprobe.d/blacklist.conf
and add the following lines to the end of the file:
#recommended by http://ubuntuforums.org/showthread.php?t=1467074
blacklist vga16fb
blacklist nouveau
blacklist rivafb
[Code].....
View 2 Replies
View Related
May 8, 2009
I am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.
su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm'
su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'
Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root.
nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows
Fedora (2.6.27.21-170.2.56.fc10.i686)
Fedora (2.6.27.5-117.fc10.i686.PAE)
If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.
[Code]....
View 3 Replies
View Related
Jul 30, 2010
I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:
Code:
(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[code]....
Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?
View 2 Replies
View Related
Feb 23, 2010
I have an older PC that was running F11 without any problems. At some point I started updating to F12 through the web and got a a nice black screen that pretty much hosed my OS. (Not a big deal).So I went and downloaded the F12 Live CD which did the same thing.., at some point just after install the screen would be black and reset is the only option.Got the full F12 32-bit DVD and during the installation I get: "X Startup Failed,Falling back to text mode."Finishing the install I get to a nice black log-in prompt so I can log-in as root.From there I cant do much as I am a n00d in Linux to some extent and my network doesn't work
My video card is a Geforce FX 5200 which installed and worked just fine under F11 (without me doing anything but basic install and Ubuntu 9.10)
View 8 Replies
View Related
Mar 26, 2010
this my second thread and i need to know why both alternate and graphical installers freeze when install starts and is it becuase of my DvD Drive and what do i need to do.Also is it possible to create a new partition on my hd and then install linux from their and then log on and delete windows partition.
View 1 Replies
View Related
Sep 20, 2010
I backed up all my Wubi-files + the boot.ini etc. I reinstalled my Windows OS, then put my Wubi-files on a new partition D: . Put the wubildr.mdr file + wubildr in the C: dir. Changed the boot.ini to C:wubildr.mdr = "Ubuntu" . But when I select Ubuntu in the boot manager I get an error message (Couldn't load Windows, ntoskrnl corrupt - or something).What do I do wrong? Can't I just install a new Wubi using the installer and then replace the disk-file by the old one?
View 2 Replies
View Related
Jun 7, 2010
Once i open terminal window display this message:
username@username ~desktop :~ $
View 2 Replies
View Related
May 29, 2010
I haven't used linux for a long time, after this break i wanted to install ubuntu and give it a shot but altough that i have a 10gb free space and another seperate 2gb free space for a possible linux setup, installer can't seem to recognize them.
View 1 Replies
View Related
Mar 7, 2010
First my uname -a
Code: Linux quad 2.6.33 #1 SMP Sun Mar 7 18:22:02 CET 2010 x86_64 GNU/Linux I am using Trisquel GNU/Linux 3.0. I am asking my questions here, since this involves non-free drivers. I succesfully installed the nvidia driver on the default kernel. But the default kernel has removed all support for DVB USB sticks, so I had to compile my own kernel.
I got the newest version from kernel.org. Saved the archieve to /usr/src/. unzipped the file in the directory (so my kernel source is now in /usr/src/linux-2.6.33/.) Made a symlink with ln -s linux-2.6.33 linux. I compiled the kernel succesfully. Did a "make install" and "make modules_install" and ran "update-grub". Restarted system. Cd'ed to my source directory and ran "make headers_install" succesfully. Looking at my timestamps, it looks like the kernel headers has been installed to /usr/src/linux-2.6.33/usr/include/linux/. I downloaded the latest x86_64 drivers from nvidias website. Went to console 1 and closed up X. If I start the installer without any parameters (sh NVIDIA*.run) I get the following error:
Code: ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.33/source'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option. lib/modules/2.6.33/source is a symlink which point to /usr/src/linux-2.6.33
I get the same error if using --kernel-source-path=/usr/src/linux/, /usr/src/linux-2.6.33/ and similar options which link to this directory through symlinks. If I use --kernel-source-path=/usr/src/linux-2.6.33/usr/include, I get the following error:
[Code]....
View 6 Replies
View Related
Sep 30, 2010
I am trying to install a vendor provided driver in Fedora 9 kernel 2.6.27.25-78.2.56.fc9.x86_64. Apparently the vendor stopped officially supporting Linux a number of years ago, so there were a few things I needed to change in the source code to get it to compile, now I'm trying to install it. Make runs successfully, but when I try to "make install" this happens:
Code:
# make install
Unloading any instances of foo module
Loading new foo into running kernel
insmod: error inserting 'foo.ko': -1 Operation not permitted
make: *** [install] Error 1
I've tried finding a solution via Google but it seems that the majority of people solved this problem using sudo, but I'm using su already and this still happens. I've also gone into make menuconfig and modules are enabled. I have access to the makefile and all the source code, so if something needs to be done there I can do it. If anyone has any ideas, please don't leave out any details; I'm a complete newbie when it comes to Linux
View 2 Replies
View Related
Jul 22, 2010
I have a laptop which has Xubuntu on a Wubi install. I have no way to connect my laptop to the internet, as I have dial-up on my desktop and my laptop doesn't have a dial-up modem. I need to install "libc6" as a dependency for libc6-dev, but when I double click the .deb (which I transferred using an sd card using my desktop, which has Vista) It shows the window for a couple seconds, and then closes. I already have libc6 installed, but it is an older version.
View 2 Replies
View Related
Jun 24, 2010
i try to boot off the cd, it loads vmlinz and init.rd, anaconda starts loading.it mounts the temp filesystem and freezes. i can't choose how to install or anything. nothing comes up graphically.
View 2 Replies
View Related
