Ubuntu :: Computer Hangs At "Loading Operating System" / Solve This?
Aug 9, 2010
I just installed Ubuntu Lucid yesterday, and I'm dual-booting with Windows 7. (They're on separate physical drives if that's relevant.) I've discovered that whenever I restart the computer, it doesn't matter if it's from Windows or Ubuntu or just hitting the reset button, it hangs at "Loading Operating System." If I start it cold, though, it usually works fine. I tried Googling but I couldn't seem to find anybody else with this problem. I'm guessing it's a GRUB problem? Does anybody know how to fix it?
View 1 Replies
ADVERTISEMENT
Aug 2, 2010
I just joined the forum today. I'm not a linux beginner per se (about 4 years experience, now running Ubuntu Lucid on my laptop and windoze-free) and I built the desktop PC I'm typing this on six years ago. However, this is my first HTPC build and my first KnoppMyth install, and I've probably done something foolish.
This was an attempt at a fresh KnoppMyth 5.5 install on a virgin system. Hardware details:
MB: GIGABYTE|GA-880GMA-UD2H R
CPU: AMD|PH II X4 925 AM3 RT
RAM: 2Gx2|GSKILL F3-10666CL7D-4GBRH
HD: 1T|WD 7K 64M SATAIII WD1002FAEX - OEM
CD: BLU-RAY BURNER LG | WH10LS30 OEM - OEM
[Code]..
Basically, I just wish I had never bothered with KM5.5 and I want a do-over to go back to the beginning and put the LinHES 6.03 CD in and just do the installation. Since I can't do this, I'd like to at least be able to wipe everything I did and start fresh. Recall that I couldn't boot from CDROM even before I made the daft remove of LILO. The only time I successfully booted from CD was the very first time I turned on the machine to install KM5.5
View 1 Replies
View Related
Apr 5, 2010
I have been working with dualboot XP and ubuntu on my laptop and screwed the system completely. No matter what I do I get the message "Operating system not found".I also have been trying with, super grub disk, without success.
My question: Can I solve the problem with a new or a blank Harddisk?
View 3 Replies
View Related
Mar 18, 2010
I have a serious problem with my computer. I had once shut down my windows forcefully( i.e. using the button) and now i am now not able to login to windows again. I tried installing linux from the booting cd but was not possible also. Now when I start my computer I get an error message. What to do?
View 2 Replies
View Related
Aug 6, 2010
I've been using Ubuntu 9.10 for a while now, and i've started to look at other distros of linux. I found PClinuxOS which seemed decent and decided to install it alongside my Ubuntu 9.10 and Windows Vista. The bootloader that came with PClinuxOS recognised my Vista OS, but not my Ubuntu.long story short, i recovered Ubuntu's GRUB becasue i had already edited it to my liking. GRUB found the PClinuxOS partition and added it to the menu. Vista and Ubuntu start fine, but when i try to select the PClinuxOS option, i get this message-type-thing:
[linux-bzImage, setup=0x3a00, size=0x1f9110]vga=788 is deprecated. useset gfxpayload=800x600x16, 800x600 before linux command insteaderror: no such partitionI don't really know, but it almost sounds like GRUB is trying to find the linux kernel, but it cannot connect to the partition for some reason. I have been extremely pleased with Ubuntu, so I really don't need another distro, but I'd like to know how to fix this
View 7 Replies
View Related
Apr 24, 2010
I'm trying to install 11.2 Gnome from the live cd on an HP n410c laptop. The install seems to go smoothly until I'm told I must reboot without the cd. I've tried three or four variations of the process and each time I see, "Error Loading Operating System."I've reloaded the live cd and examined /boot/grub/menu.lst. It appears to be correct. It seems like the initial GRub loader isn't found in the MBR.If I run grub-install, the graphical interface comes up then complains, "Because of partitioning, the boot loader cannot be installed properly."
View 2 Replies
View Related
Sep 4, 2010
I have a problem with the kernel update to 2.6.34.6. Up until 2.6.33.x my system boots fine, but with this update the boot stops at the moment that the mouse cursor should become visible. To resolve the problem, I've gone back to 2.6.33.x and removed the 2.6.34 kernel but I wonder what happens with the next kernel update.
Anyone else having this problem?
View 8 Replies
View Related
Jan 13, 2009
I have a fancy new Quad Core Xeon machine here that I'm trying to install F10 x64 on. The installation went fine. When it reboots the first time, though, I get the dreaded Error Loading OS.
So I dug up my bookmark of the awesome Grub HOWTO here and followed the steps to install Grub manually. Alas, I get the same result after installing it. Even tried doing a makeactive (hd0) just in case, but no luck.
I did more searching and searched for "raid install" but didn't find anything helpful. So here I am... hoping somebody has some insight.
View 1 Replies
View Related
Jun 29, 2011
Installed 11.4 on a machine with two SATA drives which had previously been running Windows 2003. I deleted the Windows partitions and created a new partition scheme: Swap, root and one additional partition on the first disk, one large partition on the second disk. Install runs fine but upon reboot I get "Error loading operating system". Booting off a Windows floppy and running FDisk shows that the root partition is marked as active.
View 7 Replies
View Related
Dec 12, 2010
Ok, I have a Gateway Solo 5300 and I want to use it as a test server (install Ubuntu Server 10.10 and everything else after that.) The problem is I shut down the computer after it deleted the hard drive clean through installation and now I have to network boot because its old. What do I need to do that?
View 1 Replies
View Related
Oct 10, 2010
I am trying to install ubuntu 10.04 and it say this computer does not have operating system on it, it wants to format the entire drive. here is the result of the fdisk. code...
View 3 Replies
View Related
Feb 19, 2011
I've been using Ubuntu Netbook edition on my Asus eee pc 1005HA, dual-booting with Windows 7.Things have been fine with it for a month or two. However, I've now run into some trouble with Grub2 and the MBR, and I cannot get my computer to boot into ANY operating system. Right now I'm booting from the Ubuntu installation CD to "try Ubuntu" -- it's the only way I can use my computer at all.
I have looked through the forums and googled, and already tried several methods of fixing Grub2, none of which have worked so far. Here's the situation: I wanted to disable / uninstall Grub2, so that the computer would boot as normal into Windows 7, to fix some problems and then reinstall Grub2 later. To do this I just went to the Windows System Repair environment, opened the command prompt, and entered the two commands "bootrec /fixmbr" and "bootrec /fixboot" with the understanding that this would reset the Windows control of booting, and remove Grub2's control. The result was that my computer cannot boot properly at all. No Windows and no Grub2.
So far I've tried to fix this by using the Super Grub Disk to try to use the auto-repair feature, which failed. I've also tried in various ways to reinstall / repair / update Grub by using the Terminal in Ubuntu (through the "try Ubuntu" CD), but so far none of the methods I've found have worked. If anyone could explain or direct me to a step-by-step of how to repair the MBR and install Grub2 from scratch,
View 9 Replies
View Related
Sep 1, 2011
I have been trying to find an answer for the past 4 hours, and I am stressing out right now. I bought a IBM Thinkcentre Celeron 2.8ghz off ebay, and when I turn it on it had no operating system. It says: "1962: No operating system found. Press F1 to reboot." I press F1, and it just did they same thing. Came up with that message.
Then I searched on the net for some answers on how to install ubuntu onto a computer without an operating system, and they said to enter BIOS menu and boot the ubuntu from the USB. So I turned the comp back on, and I pressed every button on the Computer except F1, and it did nothing. I dont know how to get into the BIOS menu.
View 5 Replies
View Related
May 17, 2011
This is a IBM T23 (10 years old)pentium3 1.1ghz640mb ram28gb hdd (contianing several bad sectors)intel graphicseverything works out of box (graphics, wireless, etc) on a live cdhowever after installation, upon boot, it displays "Error loading operating system" right after BIOS and before even goes into GRUB and is stuck there.Enter live cd, and choosing boot from harddrive does not solve the problem.Already did the CD check, which shows no problemdid a bit googlingturned out this could be an issue with a dying harddriveand sadly, it is the case, the harddrive on this 10 year old laptop is indeed dying D:However, installing windows xp posed no problem... (altho tons of driver issue, but anyways...)I have a few solutions in mind1). just use a usb stick as the replacement for harddrive2). get a new harddrive (not even sure what to get for this laptop D: )3). find a magical way to fix it :SWould definitely be glad to know a way to load this system on this existing harddrive for nowI was told earlier that there are ways to tell the system to avoid mapping the bad sectors.
View 5 Replies
View Related
Mar 10, 2010
I try installing Ubuntu 9.10 in my computer On reaching the prepare disk section it shows me that there is no operating system installed yet i have XP installed. it is also not showing the partitions in my computer yet i have 4 partitions. i cant do without ubuntu in my machine.
View 2 Replies
View Related
Feb 22, 2011
I am new to Linux. I will receive a new Dell desktop without any operating systems. Can anybody advise me how to install CentOS 5.5 on it?
View 12 Replies
View Related
Jan 14, 2010
Can you install a linux version on a computer that has no operating system pre-installed i.e wiped hard drive
View 2 Replies
View Related
Jan 13, 2010
Will a Linux operating system lose data during a power failure as does a Windows operating system?
(If yes.) This has not come up before but I'm going to be doing some work I don't want to lose.
Could you either point me to a backup tutorial or give me the quick overview of preserving stuff with Ubuntu?
View 4 Replies
View Related
Aug 26, 2010
My system hangs at boot time when loading hardware drivers for about a minute. It hangs here:
Code: dmesg
[ 8.196035] udevd version 124 started
[ 8.533233] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[code]....
View 9 Replies
View Related
Mar 17, 2011
I am having difficulty loading fedora 14 with nvidia 7300gt. I have lots of text on the screen but I cannot enter anything then system hangs there only. The same system runs fine with windows XP The same system runs fine when I use onboard graphic card and disable nvidia. I installed the fedora 14 by disabling nvidia graphic card and used onboard grphic card. I had exactly the same problem with ubuntu, I was not even able to boot from live cd with nvidia. Now I want to use my nvidia graphic card for fedora.
View 9 Replies
View Related
Feb 3, 2010
I'm new to both Ubuntu and this forum, so please try to bear with me.I have a 500GB HDD with these partitions Screenshot.pngI'm currently using the live CD to boot because when I try to boot to this HDD it simply comes up with the error "Error loading operating system". It was working fine until I started reformatting a different drive with XP on it; since then it has had the error.As far as I know I need to reconfigure GRUB to boot to the correct partition, but I do not know how to do this.I know that there are already threads about booting/GRUB problems. I have looked at a lot of them but because no one has exactly the same problem as me I do not know what to do.
View 9 Replies
View Related
Oct 20, 2010
I seem to be having a problem creating a bootable Ubuntu USB drive. After following the instructions at [URL] my PC says "Error loading operating system". It doesn't provide any information as to why it fails to load the OS. I selected the the "daily live" distribution of Ubuntu.
View 2 Replies
View Related
Sep 2, 2010
My system hangs at boot time when loading hardware drivers for about a minute. dmesg
Code:
[ 11.865604] iTCO_vendor_support: vendor-support=0
[ 11.888580] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[code]....
View 3 Replies
View Related
Jul 12, 2010
I just installed Fedora 13 x85_64 on Intel s45sf server board with hardware raid and 8Gb memory. After installation and reboot I got the message: Error Loading Operating System I tried installation with no raid I doesn't work.
View 1 Replies
View Related
Jul 24, 2011
could any one tell me about the uses of linux operating system compared to windows operating system
View 6 Replies
View Related
Jul 13, 2011
I have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have;
- Intel Pentium Dual Core processors
- Asus motherboards
- Onboard VGA, Sound, NW
- 2 GB DDR2 RAM
- 80 GB SATA HDD
code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
View 9 Replies
View Related
Feb 6, 2010
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
View 3 Replies
View Related
Jun 19, 2009
I've just installed the new Fedora 11 (just released) through a Live CD having 3 partitions created:
"/boot" - ext3,
"/" - lvm (part 1)
swap - lvm (part 2)
now, I want to add my new Fedora system entry to my "central" lilo.conf, resident on another linux distribution. So, i've done
[Code]...
my lilo fedora entry boots fine but... at the middle of "after boot" loading the system hangs and stops the usual driver detection, etc (normally, it hangs on the CDROM detection or USB 2.0 camera detection).
View 10 Replies
View Related
May 2, 2010
I installed lucid the other day on my laptop, the first time it booted after installing it gave two error messages (unfortunately I can't remember what they said). The errors stopped appearing after that but once I select Ubuntu from the boot menu, it just hangs on a black screen for a good 15 seconds at the least before it runs the plymouth screen for like 2 seconds (the progress bar is already full) and then goes into the login screen. Here is my boot chart:
http://akgenome.com/files/bootchart.png
I was wondering if anyone can tell from that what is causing the issue and perhaps how to fix it? The boot log is like 3 lines long and is completely normal.
View 1 Replies
View Related
Apr 4, 2011
I have installed Ubuntu 64bit 10.04 LTS version. I am trying to install open-iscsi and my apt-get install commands hangs code...
my sources.list seems to be fine. What might be the issue?? never had this issue on a 32 bit version of Ubuntu 9.
View 1 Replies
View Related
