Ubuntu Installation :: Best Graphics Card To Work With Lucid 10.04?
Jun 20, 2011
Last month I installed a newer MoBo + CPU and PSU, (See system specs in my signature) and moved from Maverick to Lucid 10.04.
I was running Natty 11.04 64bit up until a couple of days ago, but that was locking up like mad. I did a fresh install of 10.04 over the whole HDD yesterday...though cannot recall it asking me if I wanted 32 or 64bit...will neeed to check)
I'm using an ATI Radeon (Sapphire?) x1650 PRO graphics card - but borrowed from a friend as my previous card wouldn't fit in the upgrade motherboard. Ubuntu is running quite fast with it but often stutters when on Firefox or Chrome. With Natty the system would lock up at least once an hour, with Lucid - at the moment it's only locked up once in 6 hours... I'm assuming this is just problems with Ubuntu and not the card. I get no odd lines or color on the screen.
I'll need to give this card back at some point... I'm wondering if people could suggest other cards (Nvidia/ATI or other) that are known to work happily with Ubuntu 10.04. I've got a budget of around �40, but then I'm not gaming so guess shouldn't need anything too high spec. (My PSU has a PCI-E connector if needed...though doubt it will be!)
View 4 Replies
ADVERTISEMENT
May 28, 2010
I've been meaning to get back into linux for a couple of years now.It seems I may have left it too long for my hardware.I'm struggling to freshly install lucid 10.04 onto a pc with an ATI 9200 graphics card.Can someone give a definitive answer on this - the internet is full of different solutions and I cannot get any to work.
View 9 Replies
View Related
May 7, 2010
I have been unable to get the fancy purple bootsplash (plymouth) since I installed Lucid Lynx on my ThinkPad T43. The bootsplash would up when I had booted off of a Live CD, but all future instances post-install only shows the blinking terminal cursor, followed by the GNOME log in screen. This has occurred after upgrading from Karmic, and after attempting a fresh installation of Lucid. Here's what I've tried so far without success:
comment out "GRUB_HIDDEN_TIMEOUT=0" in the grub file tried running echo FRAMEBUFFER=y > /etc/initramfs-tools/conf.d/splash update-initramfs -u under su but it did not work because my conf.d directory doesn't contain a file called "splash", but only one file called "resume". This fix was taken from [URL]..A Google search showed that a lot of users with this problem have NVIDIA cards; however I'm running ubuntu on a system with an ATI card.
View 7 Replies
View Related
Feb 11, 2011
My laptop is an HP Pavilion dv6 3078-tx. It is was a great laptop when it was running windows 7 but when I tried installing Ubuntu, I slowly began to hate it more and more. The issue is with the ATI and Intel switchable graphics card. Ubuntu installs fine and things seem to be great but I cant use the better graphics effects in ubuntu. I installed the driver that ubuntu provides for ATI and it didnt work and ubuntu booted into a terminal etc.. and I had to put it back to the way it was before. After sometime researching on the internet I know the problem is with the swtichable graphics.
Unfortunatley there is no option to turn off switchable graphic in my bios and hp arent much of a help. I dont know what to do now ? Is there any way to get switchable graphics to w ork with linux, is there way to get version of the bios that lets me disable it ? any variations of ubuntu or linux that it works with. I would prefer to use the ATI if i have to disable one or the other cause Im usually running on ac power anyways.
View 2 Replies
View Related
Dec 25, 2009
I just got a new graphics card (all specs below) and when I start up the computer, it loads the BIOS, then says it's loading grub 2, then says, "Initializing gfx code..." and hangs there forever. How can I diagnose this and find out if the card will work with my computer and opensuse 11.1?
CARD SPECS
------------
NVidia GeForce 8400 GS
[code]....
View 5 Replies
View Related
Mar 10, 2010
I am a new Ubuntu user and am having trouble getting the audio to work through the hdmi out to my tv using an Nvidia Ion graphics/sound card.
As far as I can make out Ubuntu recognises the sound card l but i cant get any sound out of it and don't know to go about altering anything.
View 3 Replies
View Related
May 25, 2010
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
View 5 Replies
View Related
May 18, 2009
My computer have ATI X600 graphics card installed, and I installed CentOS5.3.
Every time I suspend my computer and then resume it, it seem the graphics card can't resume and the monitor says 'no signal', but the system still responses, I can use keyboard.
Is there any configuration I can't do to make it resume normally? I've searched a lot in Google but can't find out any one else run into the same problem.
Information about the card:
Quote:
View 5 Replies
View Related
Oct 2, 2010
I really don't know what I'm doing. I know how to use the command line (though, I'm not often sure EXACTLY what I'm doing with it), I know basically what sudo is. Beyond that I'm pretty lost if you were to ask me to explain any of linux/ubuntu/unix/etc...However. I'm good at following instructions.I have an ancient Toshiba Satellite 1415 laptop.
1.8GHz Celeron
256MB RAM
nVidia GeForce4 420Go (with nVidia X drivers actually working, woooo!)
Intel integrated 10/100 Ethernet
DVD-ROM/CD+/-RW drive [non-functioning]
integrated 802.11b card [non-functioning]
I've installed Lucid via PXE (see above RE: non-functioning optical disc drive). It was a hassle to do so, but since I've not been able to get this laptop to boot from a usb drive, it seemed the way to go. However, the PXE setup process is not exactly straightforward; therefore I THINK I installed it correctly because most everything else works fine, but I really have no way of knowing.
More preliminaries: As the built-in wireless card in the Laptop has been dead for longer than I care to remember, I'm attempting to use a PCMCIA D-Link DWL-650+ (not a 650 or a 650G or a 650G+) which says that it's supposed to work "out of the box" with the ACX100 driver.
lspci returns the line:
Code:
05:00.0 Network controller: Texas Instruments ACX 100 22Mbps Wireless Interface ifconfig returns info on "eth0" and "lo", the ethernet, and loopback interfaces respectively.It makes no mention of a wlan0 interface.iwconfig reports (correctly) that eth0 and lo have no wireless extentions.[code]..;;
I'm running Ubuntu 10.04.1 LTS. Kernel/architecture is 2.6.32-25-generic i686.This laptop ancient and cheap,so it's definitely 32bit.I've tried following various tutorials for getting an ACX100 based-card to work, but keep running into errors that the tutorial doesn't cover.The main problem seems to be that almost all the info out there is out-dated by about 2 years.The ACX100 project's Wiki at TheSourceForge states, "Ubuntu 9.10 deprecated linux-restricted-modules in favor of DKMS.
View 5 Replies
View Related
May 6, 2010
I've tried various searches and haven't found anything quite matching this. Please forgive me if I am repeating though. I upgraded my Dell D600 (ATI Mobility Radeon 9000) from Karmic to Lucid. On Karmic, all 3D effects (Expo, Rotating Cube, etc.) worked fine. On Lucid, all still work but, once once enabled, the 3D effect is very dim - almost as if the backlight on the effect itself is turned off (i.e., when rotating the cube, the cube is dark but the background Skydome is illuminated). Once the effect is over, normal illumination returns. Running Karmic from the live disk and the effects are fine again. A buddy upgraded his D610 (next ATI in the line) and does not have the same issue.
View 3 Replies
View Related
Oct 11, 2010
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
View 11 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
May 2, 2010
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
View 1 Replies
View Related
Mar 22, 2011
I ran the wubi installer for kubuntu on my computer running a Windows 7 64 bit OS. When I boot my computer up I can go with either windows or kubuntu. I boot up kubuntu and an image of the kde logo appears. Then the computer shows a garbled mix of multi-colored pixels in no distinguishable pattern, yet the mouse is visible and still movable.
ASUS Notebook G73Jh series
Processor:
Intel Core i7 CPU Q720
1.60 GHz 1.60 Ghz
6 GB RAM
Graphics card:
ATI Radeon HD 5870
View 6 Replies
View Related
Apr 9, 2011
I'm trying to install a driver for a Radeon x700. I downloaded the driver from the site and the sh command to install it but this is what I got.
View 2 Replies
View Related
Sep 1, 2011
Installed Ubuntu 11.04 but i don't know how to install my nvidia 7200 gs graphics card. in the previous versions (ubuntu 9.10) it installed very easly.. But in Natty 11.04, while i am try to install my driver it fails 2 times and after installation (reboot) ubuntu freezes and not working So reinstalled ubuntu 11.04.
View 3 Replies
View Related
Sep 19, 2010
I'd been using 10.04 for a while and then one day the computer wouldn't boot. It just loaded up to a low res purple screen with the loading dots on it and froze. I managed to get all my files back and everything and re-install and it was working fine until I enabled the graphics card and then the same problem occurred. I've isolated the problem to the graphics card. It's never given me issues before and I've been running Ubuntu for about 2 1/2 years now so I was kind of surprised.
It's an NVIDEA card by the way. Any suggestions as to what I should do? I need hardware support for graphics because I do some work in 2D and 3D and as such need to be able to do that stuff on my PC. I don't want to have to keep reinstalling to check if the graphics card is working again yet but it's the only thing I can think of =(
View 1 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Dec 10, 2010
How to install this Nvidia Geforce 8800 driver. I've been told that the installation files I got will do everything - it doesn't. I've been told about some kind of xorg.conf file that doesn't exist- xorg.conf-vesa does though, I assume that's vesa drivers and theres something else for other drivers.
View 14 Replies
View Related
Jan 20, 2010
I have an ATI Radeon 9000 Graphics card that Ubuntu 9.10 doesn't seem to recognize no matter what I do. Knowing that its an older card and that ATI stopped support for it a while ago, I was wondering if anyone knows if I would have better luck on Ubuntu 8.04. I can't get 3d or opengl to work, or install the correct ATI Driver.
View 2 Replies
View Related
Apr 1, 2010
I installed a new graphics card (Nvidia GeForce GT240 1 Gb, 128bit DDR3) on my gigabyte VA900M motherboard, with my computer running a dual boot of windows 7 (64 bit) and ubuntu 9.10 (64 bit). The computer would not boot past the memory test stage. To solve this, i flashed the BIOS with the latest upgrade for the motherboard from the Gigabyte website. This still did not work, so, doing the usual "testing hardware combinations by unplugging and replugging", I removed 1 Gb of RAM, which solved the problem of booting past memory test (a case of too much memory?)
Problem: The problem now is, GRUB wont boot from the HD, unless I have the Windows 7 disk (or Ubuntu Live) in the DVD drive. If i dont press a key to boot from the disk, Grub will then load. how to make GRUB boot from the HD? Do I need to redirect/reinstall GRUB? Im pretty sure it is not a BIOS problem.
View 2 Replies
View Related
Jun 15, 2010
I currently have integrated graphics on my system but I am going to gettign a new graphics card to use. Click here to see it. I have a dual boot system with Windows Vista and Ubuntu 10.04. How would I install it? I know how I would plug it in but setting it up is another issue. I want it to work on both Vista and Ubuntu. Another question is what I should do about my current integrated graphics (Do I disable it or something like that?)
Here is my system's specs: HP Pavilion a6554f
View 2 Replies
View Related
Oct 11, 2010
I'm trying to setup a dual boot of windows 7 x64 and Ubuntu 10.10 i386. Before I got windows 7 and the new graphics card it ran 9.10 perfectly. If I take the card out (Nvidia 8800 Ultra), it will install fine but when I put the card back in, it crashes. It appears that it just doesn't like the card.
View 3 Replies
View Related
Nov 22, 2010
I know there are many threads on similar issues but I can't find anything that will work. Not sure if I need drivers or what to do - I feel really stupid as I should be able to get this right but I am at a brick wall. Basically I have a 20inch monitor hooked up to the on-board graphics card and cannot get higher resolution than 900 x 600. It should be at 1280 by 1240. This is a brand new install with the latest Ubuntu 10. Under monitor preferences its says 'unknown' for monitor type and I don't have any driver disk for this screen but never needed one previously.
[Code]...
View 1 Replies
View Related
Jul 8, 2011
linux and have installed ubuntu dual boot windows 7 on a new el1384 e.machine. The first issue I had was not being able to see boot text such as the bios or os boot menu due to a "signal out of range" on the monitor (also new). I installed startup manager and am now able to boot windows if I need it (but only because startup manager is high resolution, the monitor/or onboard nvidia does not want to display bios/boot low res text. The second issue I have been having is you tube freezing the system. If I remember correctly (not at home pc now) I removed nvidia driver, tried ..... again, reinstalled, same thing, rebooted same thing, but havent got much further than that.
I like fast and enjoy hq video and sometimes hook into a projector. So might an aftermarket video card surpass or deal with these issues?With a new card I will be using a decent new hdmi cable, so I will be using a different connection to the monitor. However I am not ruling out a video card that only has vga. so any thoughts on this or suggestions for low profile pci express x16 or 5 graphics card that will fit in the small emachine, run on the 220w power supply, work easily with ubuntu, and is under 50$?? (i am ok with going back into windows to mount the video card)
View 2 Replies
View Related
Jun 7, 2015
I am tryint to install Debian Jessie on my desktop.My system configuration are:
Processor:- i7 4790k
motherboard:- Z97X-UD3H-BK-CF
ram:- 4GB DDR3
graphics card:- AMD radeon R9 200 series.
I am trying to dual boot here (Debian and Windows 7).I am trying to setup server here (trying my hands on first time.)I am getting the following error on the screen when i select to boot from Debian (windows boots up normally when selected in grub) I have attached the image,it states:-Radeon kernel modesetting for r600 or later requires firmware-linux-nonfree
View 14 Replies
View Related
Nov 20, 2009
Last night installed Fedora 12 64 bit KDE, but can't find the correct drivers for the above graphics card.
View 1 Replies
View Related
Jul 20, 2011
Do they recommend the installation of bumblebee energy saving graphics card? Also works with pc desktop or laptop only?
View 3 Replies
View Related
Dec 11, 2008
I took the following path: Yast - Hardware - Graphics Card and Monitor; and it gave me message "the configuration is Framebuffer based and your system does not support changes for resolution and/or color settings". I verified my system's(dual boot system) graphics card using windows OS and it showed NVIDIA Quadro FX 570, but in X11 configuration it shows "Card: VESA Framebuffer Graphics" and the Properties tab is not active.
View 1 Replies
View Related
May 1, 2010
I'm having a problem with my wifi card: it is not detected by the network manager. I have tried going to the Hardware Drivers utility, but it doesn't find any proprietary hardware.I really am at a loss as to how to make Lucid "start over" with the wifi detection.I have installed Lucid using an existing /home, which was under 8.10. Maybe i just need to wipe out some configuration files to start afresh?
View 9 Replies
View Related
