Ubuntu :: Wubi Lucid Cannot Enable Graphics Effects?
May 3, 2010
I am running Wubi 64 bit Lucid on a Toshiba Satellite A215 S7422. In Karmic I was able to use desktop effects on max, with cube desktops and all the bells. I can no longer enable them, and after running Compiz-check I received a fail on "Checking for hardware/setup problems." The given reason was "Software Razterizer in use." Any idea what the rasterizer is/does? Would disabling it affect any other processes?
PS: If anyone can link to an article explaining how to switch from W7 Bootloader to Grub 2 (Which I already have installed)
View 9 Replies
ADVERTISEMENT
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Jul 13, 2010
Running lucid in wubi and had issues with a wiggling screen on the 2.6.32 kernel. i update to 2.6.34-020634rc6. The wiggling stopped, but now I can't get even the normal setting to work (goes straight to "searching for drivers").
View 9 Replies
View Related
Jan 15, 2010
i just installed this operating system because i've been trying all the linux distrobutions and i've used ubuntu and am used to it, so far i like this operating system i just dont know much about it yet. Here is the problem so far at first i wasnt able to get online then i some how got it to work by using yast. now i'm trying to enable the desktop effects but at first it said that my graphics didnt support it, i have a nvidia geforce 9400gt PCI-E 512MB video card, it works with ubuntu desktop effects with no problem. i noticed that it didnt ask me like in ubuntu something about the drivers not being open source and what not.
so i looked at the hardware information and it said the drivers weren't active so i went to the the nvidia site, downloaded the drivers but they wouldnt install so i found a website that said something about one click install, that wouldn't work. so i found on this forum from someone that i needed to add nvidia in the respetories, so i did, it installed the nvidia software and drivers, the video card is show and now in the hardware it shows the drivers as active. but when i activate desktop effects it asks the yes or no question then flashes after i click yes, the graphics work for one second if that, and then the bar and windows disapear and it goes white, i can still see the mouse then goes back the desktop and acts as if its enabled still but no transparent windows or wobbly windows, so i click close open it and its disabled, and its just a loop everytime i try and enable it, not sure how to post a pic but i took a screen shot of my graphics hardware.
[Code]....
View 1 Replies
View Related
Jan 16, 2009
How to enable Desktop Effects with Intel on board Graphics Card on Fedora 10?
View 1 Replies
View Related
May 14, 2010
Cant enable desktop effects Nvidia 9200M GS after update to Lucid Lynx
View 3 Replies
View Related
Mar 25, 2010
It keeps saying they cannot be enabled. but i have a good graphics card (too lazy to check what it is right now)
View 1 Replies
View Related
Jul 24, 2010
I click 'Enable' on the dekstop effects. Usually, nothing will pop up at all. Sometimes, the 'Keep Settings' thing will turn on, upon seeing I click it to keep the new settings. I turn the appearance page back on, and it says there are no effects enabled. I want to enable normal effects.
I had an old version of Ubuntu for almost half a year before updating to Lucid Lynx. I recently wiped the new version of ubuntu accidentally (lucid lynx) while playing around with it, but before I wiped it I had graphics driver and effects enabled no problem. Emerald and transparency worked, etc. I did the exact same steps this time that I did on my last install of Ubuntu- and now it won't work.
I have compiz installed but it won't enable effects either. My graphics card is a Nvidia GE Force MX, i think.
View 9 Replies
View Related
Aug 21, 2010
When I try to enable desktop effects it follows the usual procedures but at the very end it says: Desktop effects could not be enabled. My driver is working when I run that hardware test. this is my output from "compiz" at a terminal.
View 1 Replies
View Related
Oct 11, 2010
I have a Nvidia Geforce 8400GS card installed. I just reinstalled Ubuntu 9.10 on my computer, everything works but I can't enable desktop effects. I tried using the generic drivers in synaptic nothing. Tired the restricted drivers, (both of them) the system runs smoother, but still can't enable desktop effects.
I tried upgrading to 10. And after the upgrade and restart I just got a black screen. I couldn't even access the terminal So I went back to 9.10. I ran the compiz-checker script. And it spit back:
"More than one graphics chip detected -- sorry, the script can not handle that. Aborting."
Which lead me to believe the onboard card was still enabled. Unfortunately I can't disable it in bios as my bios doesn't have that option.
View 7 Replies
View Related
Nov 5, 2010
At first when i tried to enable desktop effects it said it was disabled and it had to enable it with control + shift + f12, whenever i did this it said it was enabled, but it actually wasn't.When i pressed defaults in the hope to fix it, it stopped working completely, i cannot even click on enable anymoreMy graphics card is a Radeon HD4850 and i have installed the driver trough jockey.The problem looks like this:I also seem to have a problem with themes that use transparent windows, i've tried several themes that were transparent for my friends, but they weren't for me...
View 2 Replies
View Related
Nov 29, 2010
For some reason I cannot enable desktop effects. When I try to enable from the Appearance settings it actually turns on and I can see the effects, but then it pops up a message saying "Desktop effects could not be enabled" and then it turns them back off. I saw a thread suggesting I run compiz from the command line and check the output. But when I do that it works fine and gives no errors. I also tried downloading compiz-check and here's the output of that:
Code:
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Mobility Radeon HD 3650
Driver in use: fglrx
Rendering method: None
[Code]...
View 9 Replies
View Related
Jan 26, 2011
I just got a new graphics card (Well, I guess you shouldn't call it a graphics card, it's more of a workstation card) Anyway, the card is the PNY Nvidia Quadro FX 580 and I installed the proper drivers for it (Nvidia 177) But, I'm encountering a problem with enabling the visual effects.Everything was running fine and I was able to use the effects until I enabled "Xinerama" two support both my monitors. Xinerama works fine, but the Visual Effects were reverted back to "None." When I click on "Extra" it searches for graphics drivers then tells me that I should switch to the graphics driver for my on-board graphics (ATI/AMD proprietary FGLRX graphics driver).
The ironic thing is that in the description for the Nvidia 177 driver it says "If you wish to enable desktop effects, this driver is required." It does not say that on the board graphics driver. Any suggestions? I want to start feeling like an Ubuntu user again rather than a windows user.
View 1 Replies
View Related
May 30, 2011
I'm running Ubuntu 10.10 64bit on my system. Upgraded the NVidia driver to the latest one on the NVidia website: 270.41.19 to see if it corrected a problem of when VEs were enable (even Normal not Extra), I got a white or blank screen. I could tell the system was still working because I got the text info bubbles when I moved the mouse; but when I open an app or a window, the screen was blank. After updating the driver; I can see a sharper and faster rendering image but when I enable the VEs I still get the blank screen.
View 9 Replies
View Related
Apr 7, 2010
A friend whom I turned on to Ubuntu with 9.10 recently connected a projector to watch a movie off her laptop. When it was connected, the laptop screen changed and it was clear that desktop effects through compiz were disabled. Thing is, since disconnecting the projector, I cannot get the effects back.If I go into Preferences - Appearance and click to enable Normal or Extra Visual Effects, the same thing happens. I.e. I get a popup saying Searching for hardware driver...and after about 20 seconds, the screen flashes a bit, and says
Desktop effects could not be enabled. Not sure why it's searching for a hardware driver. The computer doesn't require any 3rd party hardware drivers to be enabled - it doesn't have an nVidia card or anything like that.If it makes a difference, she yanked the VGA cord out without setting the display mode back to just her laptop with the FN and F key combo.I've tried:
-Reinstalling compiz
-Tinkering with options under Preferences - Display
-Ensuring that nothing is available under Preferences - Hardware Drivers
View 1 Replies
View Related
May 1, 2010
I can't enable my desktop effects. When I go to Custom under Visual Effect I get an error saying visual effect can't be enabled.And I have a huge black block when ever I open my browser because of my Cairo Dock. Is anyone else having these problems with their upgrade to 10.04?
View 3 Replies
View Related
May 7, 2010
Took my laptop into the computer shop for a format and asked what they thought of Linux etc, they suggested i tried Ubuntu and installed it for me.Ive been searching around trying to get past the fact that my graphics card is black listed so i can enable effects but am having no luck, im not to worried about flashy effects like the cube but i would like to tidy up my desktop as it is very cluttered with the original setup im not sure how to post a screen shot but all the icons are very big and un-appealing.would love to simplify it all and maybe have the window navigator along the bottom.Im not to confident with using the Terminal, but have had a go at Compiz-Check etc and some random commands.
View 9 Replies
View Related
May 12, 2010
How do I enable desktop effects in Ubuntu 10.04 Netbook?
i have already installed my updated video drivers and the "Visual Effects" menu is still grayed out.
View 3 Replies
View Related
May 13, 2010
I have installed Lucid on my old T61p. And I am using the NVidia driver Nouveau. But I cannot work out how to enable compiz with it. Is it possible to have composite effects with this driver?
View 3 Replies
View Related
Aug 23, 2010
I had Compiz Fusion working and wobbly windows and the likes, but after installing some updates and VirtualBox, Cairo Dock and AWN to see which one I liked, Amarok and Qlix for Zune, I restarted. Now when I open Cairo Dock there is a black border around it like transparency is disabled, no desktop effects, and I am unable to activate them because I get a no drivers found message. I don't see why this is happening considering it was working from the get-go
I have an ATI Radeon x1300, which is on the legacy list so I don't think there are drivers for it anymore that work with newer versions of Ubuntu, but I don't understand why it worked before.
My system specs:
Dell Dimension C521
2.5 GB RAM
AMD Athlon 64 3200+
ATI Radeon x1300
Ubuntu Lucid Lynx 32 Bit (Is it worth upgrading to 64 bit?)
View 3 Replies
View Related
Sep 26, 2010
I am trying to do some video tutorials at [uRL] on Ubuntu Netbook Edition 10.10 this is the first edition to require desktop effects. When I install it in the VM it isn't enabled right away. when I go to enable it I ran in to the problem that I couldn't find appearance. When I opened appearance from the terminal I couldn't enable Visual effects because mutter is running. How do I drop to the base terminal and enable visual effects?
View 6 Replies
View Related
Oct 3, 2010
I don't remember what I was doing exactly, I think I was changing the wallpaper and at the same time doing something else when all of a sudden the monitor flickered and I no longer had the advanced desktop effects with compiz. They had been working perfectly before and now all of a sudden I cannot use them. When I click on 'Extra' in the 'Visual Efects' I get the message 'Could not enable desktop effects'.I've tried 'compiz --replace' in the terminal and the windoww borders go away.
View 7 Replies
View Related
Oct 25, 2010
I have a PC that is running ubuntu 10.10 via wubi and is not connected to the web.
So my question is, is there a way to enable the desktop effects offline?
View 4 Replies
View Related
Oct 31, 2010
I have downloaded and installed all the required packages but still I am not able to enable the visual effects. Following are my Video Graphics Card details:-
[code]...
Whether any drivers need to be installed for this video card or ders any other thing to be done?
View 6 Replies
View Related
Mar 20, 2011
Everything seems up to date but whenever I try to enable effects my system refuses, says the driver is missing. I check my drivers and they are all working properly.
View 9 Replies
View Related
May 29, 2011
cant find enable effects ubuntu 11 tryed to turn on effects in compiz manager and now have no desktop and cant get it back its just my backround only i have a 2 x 64 hp pavilion
View 1 Replies
View Related
Dec 26, 2008
I'm trying to enable desktop effects but its not letting me enable it. i had it work so i know my graphic card is good enough.
View 8 Replies
View Related
Dec 8, 2009
I recently installed Mint 8 and discovered the same problem. code...
Is there some tweeking I can do, or is this a dead horse?
View 2 Replies
View Related
May 13, 2010
I first had Ubuntu 9.04 and had to go through a wild goose chase to get effects like wobby windows, cube and all that jazz. When I upgraded to 9.10 I still didn't have any problems with my desktop effects. Once I upgraded to 10.04, I couldn't use any of my effects.
I went into CompizConfig to check what was wrong, but all of my effects were still "checked". I checked the Hardware Drivers and got the drivers I needed (my GPX card is a GeForce 5200) but that still didn't fix the problem. I've tried searching for some kind of instructions in Google, but all of the instructions I've found don't really help. Does anyone know where I can go that addresses this problem and could have a possible solution?
View 5 Replies
View Related
Aug 28, 2009
Does anyone know where the file is or what the name of the file is that is used for the top of the desktop cube when desktop effects is enabled? This is the Fedora logo that is displayed by default.
View 6 Replies
View Related
