Upgraded to 10.04 with proprietary Nvidia driver. No plymouth at boot, but dmesg gives error below. On shutdown get large plymouth display. Tried several hints but none work.
2.985912] 1179648 pages RAM
[ 2.985914] 951810 pages HighMem
[ 2.985915] 149486 pages reserved
[ 2.985916] 642 pages shared
[ 2.985917] 208097 pages non-shared
[Code]...
I have successfully installed the Nvidia driver on my FC13 system that is using an Nvidia NV44 (Ge 6200) card. It seems to be working as I see the nvidia driver when I do a lsmod | grep nvidia and the glxgears program works as well as the nvidia-settings program.Basically, I did the following:
Code:
yum install kmod-nvidia-PAE
new-kernel-pkg --mkinitrd --dracut --update $(rpm -q --queryformat="%{version}-%{release}.%
[code]...
I used leighs post to install the nvidia driver for Fedora 12 and now plymouth does not work it uses the text theme. Right before it goes into the text theme I get this message:
"Unknown boot option `nouveau.modeset=0' : ignoring"
Since I've been using the nvidia drivers (from rpmfusion) and followed Leigh123's nvidia guide, I don't have a Plymouth graphical boot anymore. Instead I get the black screen and the blue/white bar at the bottom. I installed the plymouth-theme-solar (or whatever) and switched to that, updated initrd too, but no difference - same thing happened. This is an AMD64 system, latest kernel, latest nvidia drivers. Snippet of grub.conf:-
title Fedora (2.6.31.9-174.fc12.x86_64)
root (hd0,2)
kernel /vmlinuz-2.6.31.9-174.fc12.x86_64 ro root=/dev/mapper/vg_undertaker-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet selinux=0
rdblacklist=nouveau
initrd /initramfs-2.6.31.9-174.fc12.x86_64.img
I dont know if this issue has already been solved, or if there are other threads dealing with it, but Im quite desperate with this bug that has been annoying me since I upgraded from 9.10 to 10.04.
Firs I thought it would be GEM related, but Im using a proprietary graphics card, so thats not the way to solve it. I experience the problems a memory leak provokes, mainly that, as time goes by with the laptop turned on, the system needs more resources to execute simple actions, and it freezes too many times. Plus IBUS will, suddenly, stop working (I still don't know if it is related or not), and, most of the times I log in, Notification Area 2.30.0 will load with errors.
I have install Ubuntu 10.10 64bit in my sony vaio vpccw16fs which have Nvidia graphics card (GT 230M). I have install it using nomodeset and after entering the system I installed nvidia from System> Administration> Additional drivers. Driver version was current 260.19.06. After installation I was able to see the boot screen but was unable to see the logon screen. The computer froze with the background color of bootscreen which is purple. And I have to restart it and have to choose failsafe graphic mode. And after logging in in failsafe graphic mode. My NVidia driver says I am not using it. How to use nvidia driver properly. I have tried many Tutorials present on internet but none of them works.
Here is my xorg.conf file.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
I've just installed 10.04 on my Dell Latitude D830 with a NVIDIA Quadro NVS 140M; upon booting Ubuntu asked me to install the official NVIDIA driver (latest) so I went ahead and installed it, now the boot splash screen is in about 640x480/800x600 rather than the usual 1920x1200 it was when I first booted.
View 4 Replies View RelatedI have installed F13 and after reading some Nvidia Driver installation guides I managed to blacklist nouveu driver. I run the 'init 3' command and it gave me an error something like 'nouveu driver still in use' then I reboot the system and the fonts were bigger than I run init 3 command again and this time installation was completed then I went back with init 5 command. I opened nvidia x server settings I have cloned the monitors and I installed the flash player,totem vs. Than F13 gave me the notification about updates and with yum update command It has downloaded and installed those updates. Then I shut the system off. When I restarted system it does not boot up. I see the loading bar and It hangs on at the end like forever. I have installed fedora again and the process I have done was same so the result.
View 2 Replies View RelatedI realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21
View 9 Replies View RelatedHey everyone I'm pretty new to ubuntu/linux so please bear with me . I recently installed 10.10 on my new htpc. The initial install went great, until I went to install the updated driver for my graphics card. What I did was I downloaded the driver off of nvidia. Then I did these steps:
1. ctrl-alt-f1
2. logged in
3. sudo services gdm stop
4. I then located the driver package that I downloaded and ran it, it seemed to install fine (except for an error about some install script? but it let me proceed)
5. sudo services gdm start
It went to the gdm/ubuntu desktop. However I then connected it via HDMI, and the resolution was way off (top bar was not even displayed on TV) and I tried many different settings but no luck in fixing it. Next after restarting it did not automatically boot to the gdm/desktop. Instead it stayed at the command line login (the ctrl-alt-f1 screen).
tl;dr : 1. How to make it automatically boot to the gdm/desktop after I updated my gpu driver
2. How to fix the resolution for HDMI from my gpu to my TV. (DVI works fine
I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
I have searched the forums on this problem and I am still not really clear on the fix for this or even if I should wait for final release. I am running Lucid 64bit and have upgraded through the cycle from Karmic. I am using nvidia proprietary drivers. All the time that the Plymouth boot screen has been available it has been in low resolution. As we are now at beta 2 I am torn between searching a fix or waiting for the final release. So, from what I have read I need the 'nouveau' driver to fix this issue.
1. How do I install this in place of my existing nvidia proprietary driver?
2. I am a little bit confused by the hardware drivers selection panel telling me that I have an nvidia driver installed but that it is not in use-I read that this might be a bug?
I'm trying to install plymouth on my Debian 8.2 Jessie (Stable), but when I boot my pc I get this error:
Code: Select alluvesafb: cannot reserve video memory at 0xdf000000
This is my configuration:
Code: Select allcat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
[Code] ....
I have just installed the F13 XFCE spin on my netbook (Asus Eee 1000ha), and can't boot past where Plymouth is supposed to start. The message I get is below.
[Code]...
She was running a script in R (which was supposed to take a regression from R and output to LaTeX) but it failed, causing a "massive core dump" and shut down her computer. She rebooted, performed a recovery, but her system was still running slowly so she decided to upgrade to Narwhal. At this point she received an error message saying that the upgrade was interrupted by an eclipse package, and it failed, saying that her (disk? she couldn't remember) "may not be recoverable." Now, when I try to boot from GRUB, from any kernel listed ($22, $25, $27, and $28 ), I get the following error message:
I booted from a LiveCD, and it worked (including the splash screen). I then scanned the hard drive with smartctl, and looked at it in Gparted. Nothing seemed amiss. I could open files stored on the hard drive from the LiveCD, so I think there is something wrong with the boot process but I don't know how to fix it. One idea I've got is to run Super GRUB Disk and see if that fixes my boot problems.
I am using a Dell XPS m1330 with ubuntu Maverick 10.10 and with a Nvidia card. Recently I wanted to add plymouth support to my boot screens via this script: [URL].... but maybe i did something that ruined my pc and now, in GRUB, i can only see recovery kernels. The situation is this: in grub i see
linux recovery kernel 1
linux recovery kernel 2 (old one)
memtest
windows 7
My "normal" linux kernels disappeared. When I want to boot linux I use a recovery kernel, then I simply hit "resume" in the process, do the textual login and than use the command "startx" to start the system. However i'm getting no Plymouth and no normal boot. I have already tried to fix grub recreating the linux kernels, but they just don't show.
really wish to customize my GDM for ubuntu 11.4 but failed to do so.....therefore i decided to use alt. such as SLiM.....I could install it properly in virtualbox but when i went to do it on my real ubuntu 11.4 ......the screen stops at plymouth theme or goes blank after loading plymouth theme......then i read further more blogs and made changes and now even if i configure SLim the GDM starts no matter what i do .........
PS : I am new to ubuntu and dont have any knowledge about scripting programming and stuff....
I'm in the live CD right now trying to figure out what to do. When I first got into Ubuntu, it asked me to install nVidia drivers, so I did. Afterwards, it said I needed to restart my computer to finish installation, but when upon getting past the bootloader, my screen hangs on "Assuming drive cache: write through". I found this post: [URL] but the terminal commands didn't help and I can't find /etc/xorg.cfg even if I show hidden files. I've added a picture of the screen I get when I try to boot up, so maybe someone can tell me what to do to get back into Ubuntu. I would like to be able to get back without having to reinstall, if possible.
View 1 Replies View RelatedI have recently installed ubuntu desktop i386 10.10 on my laptop (Saony vaio VPCF137HG) as a dual boot. When it first started it worked perfectly, but when I installed the nvidia driver (For a nvidia Geforce 425M GPU) it came to the purple screen (Pic of screen) and no further. It doesn't respond to any commands and would not go any further, even after 40 mins!
View 3 Replies View RelatedI've just done an update and installed my nvidia drivers when I noticed my plymouth has stopped working (I think) I only get a really boring boot and I don't really know how to fix this. I've googled around for some tutorials but they did not work.
View 4 Replies View RelatedThis is my first day with Umbuntu and my first post here at the forums. I bought a Dell Pentium 4 with a fresh install of Umbuntu 9.10 on it. Worked well until I decided to do something a newbie shouldn't do and install a graphics card and drivers. The graphics card worked just fine until the drivers were installed and I tried to reboot the system. Now it no longer boots. Some specifics for you.
Since my time with Ubuntu is limited to hours, the nomenclature will probably be wrong. But I will try to get the point across. The card is a EVGA GeForce FX 5700 Ultra. On first start up with this card the computer functioned fine. I went to a place where you could change the screen options. There were three selections and I don't remember the names (idiot that I am). I selected the middle one. The OS stated that in order to utilize all the capabilities of nvidia graphics cards blah, blah, blah, a driver would need to be downloaded and activated. No name, just a driver. OK, do it (sounds kinda windows like). The download seemed to go OK, but now I needed to reboot to activate the driver.
Now: Ubuntu logo comes up. Screen goes to a text screen that says:
Ubuntu 9.10 dave-ubuntu tty1
dave-ubuntu login:
This screen flashes and does not take input from the keyboard or mouse. Next, I removed the graphics card and used the on-board graphics. Same result with faster flashing. What have I done? Apparently Ubuntu and Linux in general don't have a system recovery option? I read something about the GRUB menu, but the system flasher GRUB loading for half a second and then is on to locking up. I can't seem to get to a GRUB menu. What a way to finish the day.
I bought a new NVIDIA GeForce 6600GT video card for this PC recently and now whenever I boot Ubuntu 9.10 Live I can't change the screen resolution from 640 X 480. I get this message to the effect that the driver is restricted and not free software. When I try to download it and use it it says I can only activate it after a reboot, but I guess it means after rebooting an installation of Ubuntu, not the live cd since it never takes.
Ubuntu recommends NVIDIA accelerated graphics driver 185, so I went to NVIDIA's web site and downloaded NVIDIA-Linux-x86-185.18.36-pkg1.run (and NVIDIA-Linux-x86-190.53-pkg1.run since I think it's the newest, at least when I enter GeForce 6 Series and Linux 32-bit in the driver download search it's what comes up). I noticed that at the beginning menu of the Ubuntu 9.10 Live cd, when you press F4, the option to load from a driver disk is there. I was hoping this means I could just put one or both of the above files on a cd, insert it into the other disk drive and select that option.
i just installed nvidia driver 96 manually and after reboot pc wont boot, nothing no output , no beep even if removing ram but fans still work and lights too, did a cmos reset but still got the same result,
View 1 Replies View RelatedI am running Debian Testing and can't get Plymouth Splash to work on my system.When splash is put in the grub line it locks up on boot up.Here are my system specs:
Code: Select alldcihon@solydk64 ~ $ inxi -Fxx
System: Host: solydk64 Kernel: 4.2.0-1-amd64 x86_64 (64 bit gcc: 4.9.3)
Desktop: KDE Plasma 5.4.3 (Qt 5.5.1) dm: sddm,sddm Distro: SolydXK 9 solydxk
Machine: Mobo: ASUSTeK model: M3A78-EM v: Rev X.0x Bios: American Megatrends v: 2003 date: 10/12/2009
[code]....
I get plymouth and install it success, but it only support nouveau(nvidia) mode.
When I update my driver with [URL] , plymouth gone.
Is there any other way to do boot-image with the driver from [URL] ?
I find super-image-manager(buc), but I can not install it.
Addition: What is buc ?
Fedora 13-64. While booting the nvidia driver has a segmentation fault:
Code:
Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 530: 1406 Segmentation fault "$@"[FAILED] It is not a problem when using the notebook's led/mouse/keyboard. The problem is when I'm using an external monitor/mouse/keyboard. In this case I must first boot using the notebook until it gets to the login screen when I can start using the external configuration. That is annoying because the notebook seats under the table and must be put over the table to boot. The notebook model is HP DV6 2173 CL with a discrete GeForce G105M
My other notebook running Ubuntu works exactly as needed. The whole boot process is shown and controlled by the external monitor/mouse/keyboard.
Every time I boot, I get the following when the Nvidia driver tries to load.
Here is the Backtrace
Memory map:
Segfault during boot of nvidia drivers, anyone know what's causing it? Boot log is here: [URL] It cites a segfault in my /etc/rc.d/init.d/functions at ine 513.
View 2 Replies View Relatedi have an asus 1201n, with nvidia proprietary driver, ubuntu 10.10.i have tried to install plymouth-manager, tried to change the theme.i have tried to change screen resolution.nothing works.i really want to change the default theme to the space-sunrise.
View 6 Replies View Relatedsince i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?
View 5 Replies View Related
