Ubuntu :: "Input Signal Out Of Range" When Booting?

Jul 25, 2010

I have a HP w1907 monitor and when I boot my PC and get to BURG, the monitor shows the the "input signal is out of range" and to change settings to 1440 x 900 and 60 ghz. This message won't go away until I select an OS to boot. The message blocks the the center of BURG where I select the OS but I can still select the Os although the image is partly blocked by the "Input Signal Out of Range" message. Using BURG-Manager I set the Resolution to 1440 x 900 but I still get the message.

View 9 Replies


ADVERTISEMENT

Ubuntu :: Black Screen After Booting - Input Signal Out Of Range

Aug 27, 2010

i installed a program called start-up manager. i fiddled with the display settings cause on startup of the computer my boot screens and etc were out of wack placed halfway across the screen and really pixelated. after changing the resoloution i restarted and just after booting everything goes black and it comes up with the input signal is out of range. ive tried to run livecd or live usb i should say as its on a usb stick. and search for commands to repair my screen settings but cant. ive tried to run grub cause i heard its a repair console by pressing and holding shift it doesnt work ive tried to ctrl alt f2 and other commands during start up non of them work. they all just result in that message popping up.

there is no repair console for me to access during start up. i just want to roll back to before i did this when everything was working. also half the commands given on other threads come up with error messages saying commands were wrong and such. and ive also started up bios to try and change display settings for it to magically work so i can login and change my settings back and nothing happens. im using another computer at the moment to find results.

View 2 Replies View Related

Ubuntu :: "Input Signal Out Of Range" While Booting Up?

May 1, 2011

While my Ubuntu computer was on the splash screen, my Ubuntu is in a bad resolution and I get the error on my monitor Quote:"Input signal out of range, change settings to 1600 x 900 - 60Hz"I tried editing the GRUB file to changeQuote:

#GRUB_GFXMODE=640x480
to
Quote:

[code]...

View 9 Replies View Related

Ubuntu :: Monitor Input Signal Out Of Range / Fix It?

Nov 28, 2010

I basically destroyed my laptop a couple of years ago. Windows XP wouldn't even start but it didn't come with an installation disk. I tried recovering it but it just died. So a few months ago I put a box of thing on top of it which broke the screen! I was going to chuck it out until I stumbled upon a page which told you you could use it as a web server.

I decided to use it to host my website. I installed ubuntu without a problem however it wasn't until I was about to start it up I found out it was against BT's terms and conditions!! So since I installed ubuntu I thought I might as well make use of it and use it to render my files. When I went to turn it on for the second time and plugged it into the monitor it said input signal out of range!

I can see the login screen but I can't move the mouse or anything. I can't access the terminal, how can fix this?

View 9 Replies View Related

Debian :: Input Signal Out Of Range?

Feb 15, 2011

I have been trying unsuccessfully to load Debian on my desktop. I have tried both live and otherwise. Both AMD64 and i386. It seems to be loading fine and then all of a sudden the monitor quits with a sign Input signal out of range. I have tried lots of other live disks and they have worked fine. My monitor is a Hanns G and my video card is NVIDIA GeForce8200. All other stuff very normal. 4 Gigs of RAM. What?

View 4 Replies View Related

Fedora :: F12 -- Input Signal Out Of Range?

Mar 29, 2010

I recently installed Fedora 12 -- a brand new install, not an upgrade. The system was previously using Fedora 11 without any problems. Fedora 12 installed without any issues, and I haven't really done any customization to it. I am running KDE. The system is hooked up a KVM switch.

When I am on system #2 (a Windows system) and I switch back to system #1 (Fedora) after a few minutes of time, the Fedora screen will be blank and the monitor will present an "input signal out of range" error. I can SSH into the box and kill X to get the screen back. This has not happened on this system with any previous versions of Fedora that had been running on it (everything since Fedora 7).

View 3 Replies View Related

General :: Input Signal Out Of Range Change Settings To 1280*1024-60Hz?

Mar 31, 2010

i have both windows XP and suse linux installed in my hp pc with monitor HPL1710. when i in stalled Scientific LInux (cern) in the unallocated space using default partirtion it is in stalled. unfortunatately i have choosen the screen resolution to be 1600*1400. So when i try to reboot it says:

Code:

Input signal out of range change settings to 1280*1024-60Hz I have no idea what to do ? I dont find any scientific linux sub forum . so i am sending the thread here.

View 14 Replies View Related

Ubuntu :: "Input Signal Out Of Range, Change Settings To 1600 X 900 - 60 MHz"?

Apr 28, 2011

I just installed Ubuntu Natty on my desktop which uses an nVidia GeForce 7+ chipset. After installing Ubuntu, I noticed that when the GRUB boot menu should show up, my monitor says "Input signal out of range, change settings to 1600 x 900 - 60Hz", and it stays that way until the Ubuntu desktop shows up. The Ubuntu desktop shows up just fine. It's just that GRUB and Plymouth don't show up and my monitor gives me the aforementioned message.Here's my xorg.conf configuration after I ran the nVidia X Server Settings app:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011
Section "ServerLayout"

[cdoe]...

View 5 Replies View Related

Ubuntu :: Signal Out Of Range For Karmic Upgrade?

Jan 9, 2010

Anyone knows the workaround for Quote: Input Signal Out of Range Change Settings to 1440 x 900 - 60Hz

View 9 Replies View Related

Ubuntu Multimedia :: 11.04 - Signal Out Of Range On Boot Up

Jul 17, 2011

I installed edubuntu 11.04 a couple months ago on the kids computer. Everytime we would boot up, we received the signal out of range during the entire boot sequence. However once the login screen showed up, we could see the desktop fine. However, now it will not display anything from the time grub loads it is just Signal out of range. I even let it sit for about 10 minutes. I can boot from the live cd fine...but I'm not sure what to change. How can I fix this issue from the live cd?

View 6 Replies View Related

Ubuntu :: Stop (when Loading) Looking For Wifi Signal's In The 5000000 Khz Range?

Apr 30, 2010

Does anyone know how to stop ubuntu (when loading) looking for wifi signal's in the 5000000 khz range? I have a problem with other devices around my house that operate on this range of frequencies and it effects ubuntu while its booting, to the extent that it won�t load. My wireless router is on the 2000000 khz range therefore I only really need Ubuntu to look for devices on this range of frequencies. If anyone know a way to prevent Ubuntu looking on the 5000000 khz range by editing something I would be very greatful to know how to do this.

As at the moment I am having to boot about 5 times until it eventually decided to load. Sometimes the only way I can get in, is by going into recovery mode, dropping to terminal and typing in: "sudo gdm" and eventually I get it. Which is a right pain. Please see my previous post outlining my problem: [URL]

View 3 Replies View Related

Ubuntu :: Fixing Plymouth Screen - Lucid - Signal Out Of Range?

Sep 21, 2010

I followed the instructions given at http://linuxhub.net/2010/06/fix-big-and-ugly-plymouth-in-ubuntu-10-04-lucid-lynx/ for fixing my ugly plymouth screen after installing Nvidia drivers. All worked as expected. However I made some modifications in the instructions as I required.

Code:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
I used 1366*768 instead of 1280*1024.

[Code]...

View 3 Replies View Related

Ubuntu Installation :: No Signal Input On Display?

Dec 10, 2010

Have a Compaq Presario SR1915AN desktop with a NVIDIA GeForce 6150 LE it has a dual boot of Windows XP and Debian 5.0.6 which would only run in 800x600 mode.I decided to install Ubuntu 10.10 Desktop as this is what is on another different machine, thought it would be safe.The install wouldn't work, I would get the purple selections screen and first time chose the normal graphic mode, 10 seconds or so in to the install the scrren goes dead and i see the "No Signal Input" display show on the screen. Rebooted and selected text mode install, this time it fully installed but on reboot it again has the screen goes dead 10 seconds after you select from the Grub screen.

View 1 Replies View Related

Ubuntu Installation :: Can Not Run Live Cd Monitor Input Out Of Range?

Nov 7, 2010

this has happened with a few different attempts of ubuntu based distros lately ... i try to boot a live cd it gets to where it starts loading and the monitor pops off and says input out of range ... im aware that this is a known bug with xorg choosing either the wrong resolution or refresh rate ... but what the heck are we supposed to do , i can't get far enough into the boot process that i can open a terminal and try to bypass xorg ... so will all future distributions of ubuntu just be out of the question for me ? if you ask me what needs to be done is make the installer ASK what resolution you want to attempt to boot at .... similar to what puppy does

View 2 Replies View Related

SUSE :: Error - Input Signal Out Of Reach

Mar 25, 2010

when restarting suse 10 , i get an error displaying as Input signal out of reach..even its not going through any of the consoles....but ..when i shutdown the suse system and start suse its going inside without this error...how can i stop the error from occurring while restarting suse...this error occurs only when i restart suse.....when i freshly start suse after shutting down the system...its going well without errors.

View 1 Replies View Related

Fedora Installation :: Graphic Adapter - No Input Signal ?

May 3, 2011

I had the following problem while i installed fedora on my machine: The boot record was normally read from the installation CD and the boot screen appear, (up to this moment my Graphic Adapter is going fine) then i select the first option (which is the default as well) to boot fedora from the CD, and suddenly my monitor inform me that there is no input signal. I think it might be some driver problem, but my adapter is pretty common i think (NVIDIA GeForce 9600 GT), so its not very likely.

Things i have to note:
1. My Adapter is working on my Windows installation.
2. I manage to install fedora by removing my GeForce 9600 GT and using the on board Graphical Card from my main board.

View 5 Replies View Related

OpenSUSE Hardware :: Monitor Error - "Signal Out Of Range" / Gcard Failure

Feb 3, 2010

[For those of you who helped me before hand, sax2 wasn't good enough, so I went with the one-click, aaaaand]

Version: 11.2 "Emerald" with KDE
Card: Nvidia FX 5200

Problem: After installing one-click (5xxx legacy drivers), I ran the nvidia-config command and rebooted. Upon reboot, I get a splash screen and then nothing but a monitor error - "Signal out of Range" [Note: After googling this problem, I found a similar thread with an ATI, but since the difference between nvidia and ati is the same as perfect

View 3 Replies View Related

Ubuntu Installation :: Upon Live CD / USB Boot After First Purple Screen - Get "No Input Signal" On Monitor

Feb 19, 2011

Iv'e tried on both CD & USB. Upon Live Boot from the CD I get the first purple screen, then "No Input Signal" on my monitor. Upon Live Boot from USB I've choosen both the Install & Boot options, then It thinks for a minute; and I recieve "No Input Signal". I'm leaning toward it being my "Graphics Card"(NOTHING IS WRONG WITH IT OR ANY OF MY HARDWARE!!!!; but it is an "ATI" ^_^), but thats just a guess. Iv'e Tried Both 32/64 Here Is My Hardware Information... (Everything is Brand New & Full Diagnostics)

Intel Core i7 950
MSI Big Bang-XPower (MS-7666)
DDR3 1333 gSkill Ram (6 x 1gb)
ATI Sapphire Radeon HD 5870 (2 gb Memory, GDDR5)
HANNspree 28" Monitor 1920x1200

View 4 Replies View Related

Debian Installation :: "SOLVED" Input Out Of Range?

Oct 3, 2010

I am using my wifes comp to post thisI just installed debian but now when i boot up i get a black screen and a message from my monitor saying: input out of rangechange settings to 1280x1024 60hzas i boot up i can get into my root and get adebian~#:what code/command do i need to change the settings

View 5 Replies View Related

Ubuntu Installation :: Input - Output Error When Booting From CD

Oct 2, 2010

I got interested in it when trying to play Windows games on my Mac. I've tried WINE and didn't get anywhere fast, but thats another thread for a different forum.

For now I'd like to try Ubuntu. I downloaded the ISO and burned it to a DVD and a CD.

When booting up my computer I get this message:

I have no idea what this means. I've tried to find answers on this forum with no luck.

The computer in question:
iMac8,1
Intel Core 2 Duo
3.06 GHz
4GB Memory
NVIDIA GeForce 8800 GS (512 MB)
MacOS 10.5.8

View 3 Replies View Related

Networking :: What Are Short Range Link And Long Range Links In Routing

Jun 23, 2009

get me understand the short range and the long range links from routing (and routing protocols') point of view.

View 6 Replies View Related

Software :: Gnuplot - Combining A Linear Range And Log-scale Range In The Same X-axis?

Apr 24, 2011

I want to plot a set of data in only one plot.The problem is that some points of the data should be better plotted in a linear scale (lets say 0 to 100,000) but there are other data points that, exceding the value 100,000, would be better plotted in a logarithmic scale, as they goes in the range 100,000 to 500,000,000. Let's say the data is:

Code:

X Y
0 100
10000 80
20000 75

[code]....

Is there a way to plot all these points in the same plot in only one X-axis showing two different ranges in that axis: linear: 0-100,000 logarithmic: 100,000 - 1,000,000,000?The axis would be read, for example, as:

Code:
|-----|-----|-----|-----|-----|-----|-----|-----|-----|
0 20k 40k 60k 80k 100k 1M 10M 100M 1G

(The abbreviations k-M-G are not the important point. Just shown for clarity)

View 2 Replies View Related

Programming :: Bash Script To Ping A Range Or Own IP-range?

Apr 11, 2011

I want to build a bash script, which can ping a range IP adresses which will be filled in by the admin. If there is no IP-adress filled in, then the script must ping the subnet where the system is logged on. So if my ip is 192.168.1.6, then the script must ping from 192.168.1.1 till 192.168.1.255 Or else, if there is given a beginning and ending ip it must ping that!

The first part of the bash script is to ping a given range (see below). But there is one problem, how can I tell the script to ping from $begin till $end, [..] is of course wrong! But what must be filled in there???

echo "Enter beginning IP-adres:"
read begin
echo "Enter ending IP-adres:"
read end
ping -c 1 $begin [..] $end

The second part is to find my own ip and ping the whole range.. How to do that? I only can find my own IP, but I cant ping the whole range,, how to do that?

#!/bin/bash
ifconfig | grep 'inet addr:' | grep -v '127.0.0.1' |
cut -d: -f2 | awk '{ print $1 }'

View 11 Replies View Related

Hardware :: Mem - 'input Output Error On Sr0 Logical Block (a Large Number) After A Long Time The Booting Proceeds To A Point

Aug 29, 2010

I have been having a lot of trouble lately with installing from CD/DVD. The DVD reader/writer on this laptop is new. Nevertheless, trying to install Ubuntu onto an exernal HD, I get 'input output error on sr0 logical block (a large number) After a long time the booting proceeds to a point, but I never get the actual installation started, and have to shut down manually.

The CD is fine, says the Ubuntu-checker. I just installed using my sons laptop, and there was no trouble. Question: does this indicate a motherboard failure? A memory block damaged? Do you know of a diagnostic tool I can use to check the reading of a CD/DVD?

View 7 Replies View Related

Ubuntu Multimedia :: Change Stereo Mic Input To Mono Input?

Nov 4, 2010

I recently got a real fancy unidirectional microphone, but when I go and use it, something strange happens. The mic is a mono mic, but when I record something, it appears to think it's stereo. Instead of having the same thing on both channels, it puts it all in the left channel, and silence on the right channel.

I tried fiddling with alsamixer. In capture (F4), adjusting the "Capture" device has an effect. However, it doesn't do anything useful. Lowering the right channel to zero does nothing, lowering the left channel to zero creates silence, and disabling the right channel creates silence.

In my System>Preferences>Sound (or pavucontrol, or what-have-you), there are "Analog Stereo Input" and "Analog Stereo Duplex" options there, but no "Analog Mono Input" or "Analog Stereo Output + Analog Mono Input" options (the latter being ideal).

Something interesting, though, if I do this:
Code:
arecord -r 96000 -D pulse -c 1 -vv -V mono /dev/null
it works correctly and outputs on both channels. But if I do
Code:
arecord -r 96000 -D pulse -c 2 -vv -V stereo /dev/null
then it's back to the same behavior. The VU meter on the second command shows the left channel going up and down as I make noise, but the right one always at zero.

The machine does have a crap internal mic built in to the screen bezel. If I do either of the above commands, they both work correctly. The stereo VU shows the same activity for both channels.

The machine is a Eee 1015PED, which has Intel integrated sound. Something probably insignificant is that the mic has a 1/4 inch mono plug, and to get it to plug into the Eee, I needed to get a 1/4 female to 1/8 male adapter. The mic's 1/4 plug is mono (duh) and therefore two-conductor, but the adapter I got is stereo, or three conductor (L, R, GND). I don't know if this is tripping something in hardware to tell it it's stereo or something.

I tried the mic on my desktop, which has a SB Audigy 4 (the non-pro flavor) and that has the "Analog Mono Input" function, so that works fine. Is there some way to turn this stereo input into mono input?

View 1 Replies View Related

Ubuntu Multimedia :: Change The From Mic Input To Line Input?

May 1, 2010

I installed Lucid. I used to have Ubuntu 9.10 and to connect my iPod to my laptop's speakers. There was an option in 9.10 in the Sound Options to change the Mic Input into a Line Input. But now unfortunately I can't find it in Lucid have only 2 audio ports in the laptop: Headphone port, Mic port.

View 9 Replies View Related

Ubuntu :: Japanese Input - 10.04 - SCIM Input Program ?

May 5, 2010

I would like to use Japanese kana (hiragana, katakana, kanji) on Ubuntu but everything that I've tried to get it set up and running isn't working. The Spanish that I have set up is working perfectly so far.

I've read, the SCIM input program should start up automatically when loading a program, it doesn't. When I have it loaded I cannot seem to get the input working.

View 9 Replies View Related

Ubuntu :: Can't Get Thai Language Input To Work - In "ibus Preferences/input Method" - No Languages Are Shown

May 29, 2010

I can't get Thai language input to work.

In "language support" I installed Thai, but it remains grayed out.

In "ibus preferences / input method", no languages are shown.

I added:

I added: "ibus-daemon --xim" to startup applications. No effect.

View 1 Replies View Related

Ubuntu :: Booting After Installation (Dual Booting With Vista) - Error: No Such Devide Found

Jun 24, 2010

i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.

Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.

When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]

View 9 Replies View Related

General :: Booting Live Cd Of Fedora 15 / Change Argument During Booting Mode?

Jun 1, 2011

I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved