I have been trying unsuccessfully to load Debian on my desktop. I have tried both live and otherwise. Both AMD64 and i386. It seems to be loading fine and then all of a sudden the monitor quits with a sign Input signal out of range. I have tried lots of other live disks and they have worked fine. My monitor is a Hanns G and my video card is NVIDIA GeForce8200. All other stuff very normal. 4 Gigs of RAM. What?
View 4 RepliesI recently installed Fedora 12 -- a brand new install, not an upgrade. The system was previously using Fedora 11 without any problems. Fedora 12 installed without any issues, and I haven't really done any customization to it. I am running KDE. The system is hooked up a KVM switch.
When I am on system #2 (a Windows system) and I switch back to system #1 (Fedora) after a few minutes of time, the Fedora screen will be blank and the monitor will present an "input signal out of range" error. I can SSH into the box and kill X to get the screen back. This has not happened on this system with any previous versions of Fedora that had been running on it (everything since Fedora 7).
I basically destroyed my laptop a couple of years ago. Windows XP wouldn't even start but it didn't come with an installation disk. I tried recovering it but it just died. So a few months ago I put a box of thing on top of it which broke the screen! I was going to chuck it out until I stumbled upon a page which told you you could use it as a web server.
I decided to use it to host my website. I installed ubuntu without a problem however it wasn't until I was about to start it up I found out it was against BT's terms and conditions!! So since I installed ubuntu I thought I might as well make use of it and use it to render my files. When I went to turn it on for the second time and plugged it into the monitor it said input signal out of range!
I can see the login screen but I can't move the mouse or anything. I can't access the terminal, how can fix this?
i installed a program called start-up manager. i fiddled with the display settings cause on startup of the computer my boot screens and etc were out of wack placed halfway across the screen and really pixelated. after changing the resoloution i restarted and just after booting everything goes black and it comes up with the input signal is out of range. ive tried to run livecd or live usb i should say as its on a usb stick. and search for commands to repair my screen settings but cant. ive tried to run grub cause i heard its a repair console by pressing and holding shift it doesnt work ive tried to ctrl alt f2 and other commands during start up non of them work. they all just result in that message popping up.
there is no repair console for me to access during start up. i just want to roll back to before i did this when everything was working. also half the commands given on other threads come up with error messages saying commands were wrong and such. and ive also started up bios to try and change display settings for it to magically work so i can login and change my settings back and nothing happens. im using another computer at the moment to find results.
i have both windows XP and suse linux installed in my hp pc with monitor HPL1710. when i in stalled Scientific LInux (cern) in the unallocated space using default partirtion it is in stalled. unfortunatately i have choosen the screen resolution to be 1600*1400. So when i try to reboot it says:
Code:
Input signal out of range change settings to 1280*1024-60Hz I have no idea what to do ? I dont find any scientific linux sub forum . so i am sending the thread here.
I just installed Ubuntu Natty on my desktop which uses an nVidia GeForce 7+ chipset. After installing Ubuntu, I noticed that when the GRUB boot menu should show up, my monitor says "Input signal out of range, change settings to 1600 x 900 - 60Hz", and it stays that way until the Ubuntu desktop shows up. The Ubuntu desktop shows up just fine. It's just that GRUB and Plymouth don't show up and my monitor gives me the aforementioned message.Here's my xorg.conf configuration after I ran the nVidia X Server Settings app:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011
Section "ServerLayout"
[cdoe]...
I have a HP w1907 monitor and when I boot my PC and get to BURG, the monitor shows the the "input signal is out of range" and to change settings to 1440 x 900 and 60 ghz. This message won't go away until I select an OS to boot. The message blocks the the center of BURG where I select the OS but I can still select the Os although the image is partly blocked by the "Input Signal Out of Range" message. Using BURG-Manager I set the Resolution to 1440 x 900 but I still get the message.
View 9 Replies View RelatedWhile my Ubuntu computer was on the splash screen, my Ubuntu is in a bad resolution and I get the error on my monitor Quote:"Input signal out of range, change settings to 1600 x 900 - 60Hz"I tried editing the GRUB file to changeQuote:
#GRUB_GFXMODE=640x480
to
Quote:
[code]...
Anyone knows the workaround for Quote: Input Signal Out of Range Change Settings to 1440 x 900 - 60Hz
View 9 Replies View RelatedI installed edubuntu 11.04 a couple months ago on the kids computer. Everytime we would boot up, we received the signal out of range during the entire boot sequence. However once the login screen showed up, we could see the desktop fine. However, now it will not display anything from the time grub loads it is just Signal out of range. I even let it sit for about 10 minutes. I can boot from the live cd fine...but I'm not sure what to change. How can I fix this issue from the live cd?
View 6 Replies View RelatedI am using my wifes comp to post thisI just installed debian but now when i boot up i get a black screen and a message from my monitor saying: input out of rangechange settings to 1280x1024 60hzas i boot up i can get into my root and get adebian~#:what code/command do i need to change the settings
View 5 Replies View RelatedDoes anyone know how to stop ubuntu (when loading) looking for wifi signal's in the 5000000 khz range? I have a problem with other devices around my house that operate on this range of frequencies and it effects ubuntu while its booting, to the extent that it won�t load. My wireless router is on the 2000000 khz range therefore I only really need Ubuntu to look for devices on this range of frequencies. If anyone know a way to prevent Ubuntu looking on the 5000000 khz range by editing something I would be very greatful to know how to do this.
As at the moment I am having to boot about 5 times until it eventually decided to load. Sometimes the only way I can get in, is by going into recovery mode, dropping to terminal and typing in: "sudo gdm" and eventually I get it. Which is a right pain. Please see my previous post outlining my problem: [URL]
I followed the instructions given at http://linuxhub.net/2010/06/fix-big-and-ugly-plymouth-in-ubuntu-10-04-lucid-lynx/ for fixing my ugly plymouth screen after installing Nvidia drivers. All worked as expected. However I made some modifications in the instructions as I required.
Code:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
I used 1366*768 instead of 1280*1024.
[Code]...
Have a Compaq Presario SR1915AN desktop with a NVIDIA GeForce 6150 LE it has a dual boot of Windows XP and Debian 5.0.6 which would only run in 800x600 mode.I decided to install Ubuntu 10.10 Desktop as this is what is on another different machine, thought it would be safe.The install wouldn't work, I would get the purple selections screen and first time chose the normal graphic mode, 10 seconds or so in to the install the scrren goes dead and i see the "No Signal Input" display show on the screen. Rebooted and selected text mode install, this time it fully installed but on reboot it again has the screen goes dead 10 seconds after you select from the Grub screen.
View 1 Replies View Relatedwhen restarting suse 10 , i get an error displaying as Input signal out of reach..even its not going through any of the consoles....but ..when i shutdown the suse system and start suse its going inside without this error...how can i stop the error from occurring while restarting suse...this error occurs only when i restart suse.....when i freshly start suse after shutting down the system...its going well without errors.
View 1 Replies View RelatedI had the following problem while i installed fedora on my machine: The boot record was normally read from the installation CD and the boot screen appear, (up to this moment my Graphic Adapter is going fine) then i select the first option (which is the default as well) to boot fedora from the CD, and suddenly my monitor inform me that there is no input signal. I think it might be some driver problem, but my adapter is pretty common i think (NVIDIA GeForce 9600 GT), so its not very likely.
Things i have to note:
1. My Adapter is working on my Windows installation.
2. I manage to install fedora by removing my GeForce 9600 GT and using the on board Graphical Card from my main board.
this has happened with a few different attempts of ubuntu based distros lately ... i try to boot a live cd it gets to where it starts loading and the monitor pops off and says input out of range ... im aware that this is a known bug with xorg choosing either the wrong resolution or refresh rate ... but what the heck are we supposed to do , i can't get far enough into the boot process that i can open a terminal and try to bypass xorg ... so will all future distributions of ubuntu just be out of the question for me ? if you ask me what needs to be done is make the installer ASK what resolution you want to attempt to boot at .... similar to what puppy does
View 2 Replies View Related[For those of you who helped me before hand, sax2 wasn't good enough, so I went with the one-click, aaaaand]
Version: 11.2 "Emerald" with KDE
Card: Nvidia FX 5200
Problem: After installing one-click (5xxx legacy drivers), I ran the nvidia-config command and rebooted. Upon reboot, I get a splash screen and then nothing but a monitor error - "Signal out of Range" [Note: After googling this problem, I found a similar thread with an ATI, but since the difference between nvidia and ati is the same as perfect
Iv'e tried on both CD & USB. Upon Live Boot from the CD I get the first purple screen, then "No Input Signal" on my monitor. Upon Live Boot from USB I've choosen both the Install & Boot options, then It thinks for a minute; and I recieve "No Input Signal". I'm leaning toward it being my "Graphics Card"(NOTHING IS WRONG WITH IT OR ANY OF MY HARDWARE!!!!; but it is an "ATI" ^_^), but thats just a guess. Iv'e Tried Both 32/64 Here Is My Hardware Information... (Everything is Brand New & Full Diagnostics)
Intel Core i7 950
MSI Big Bang-XPower (MS-7666)
DDR3 1333 gSkill Ram (6 x 1gb)
ATI Sapphire Radeon HD 5870 (2 gb Memory, GDDR5)
HANNspree 28" Monitor 1920x1200
get me understand the short range and the long range links from routing (and routing protocols') point of view.
View 6 Replies View RelatedI want to plot a set of data in only one plot.The problem is that some points of the data should be better plotted in a linear scale (lets say 0 to 100,000) but there are other data points that, exceding the value 100,000, would be better plotted in a logarithmic scale, as they goes in the range 100,000 to 500,000,000. Let's say the data is:
Code:
X Y
0 100
10000 80
20000 75
[code]....
Is there a way to plot all these points in the same plot in only one X-axis showing two different ranges in that axis: linear: 0-100,000 logarithmic: 100,000 - 1,000,000,000?The axis would be read, for example, as:
Code:
|-----|-----|-----|-----|-----|-----|-----|-----|-----|
0 20k 40k 60k 80k 100k 1M 10M 100M 1G
(The abbreviations k-M-G are not the important point. Just shown for clarity)
I want to build a bash script, which can ping a range IP adresses which will be filled in by the admin. If there is no IP-adress filled in, then the script must ping the subnet where the system is logged on. So if my ip is 192.168.1.6, then the script must ping from 192.168.1.1 till 192.168.1.255 Or else, if there is given a beginning and ending ip it must ping that!
The first part of the bash script is to ping a given range (see below). But there is one problem, how can I tell the script to ping from $begin till $end, [..] is of course wrong! But what must be filled in there???
echo "Enter beginning IP-adres:"
read begin
echo "Enter ending IP-adres:"
read end
ping -c 1 $begin [..] $end
The second part is to find my own ip and ping the whole range.. How to do that? I only can find my own IP, but I cant ping the whole range,, how to do that?
#!/bin/bash
ifconfig | grep 'inet addr:' | grep -v '127.0.0.1' |
cut -d: -f2 | awk '{ print $1 }'
I am running a VPN (Juniper Networks client) and an ifconfig shows me that its opening a tunnel and also adding routing instructions (I think). Anyway the problem is that when I'm connected to the VPN, I lose route to all my local machines and this is getting annoying when I want to use ssh.Does anyone know how to not route a certain range of IP's through the VPN?
View 4 Replies View Related[URL]X.org gives me a no signal error message on my screen.(I did move to a new motherboard/integrated graphic card when the old one crashed)
View 3 Replies View Relatedi just did a graphic install of debian lenny and when i finished the installation and restarted the computer the grub boot menu appeared and i selected debian and nothing happened the monitor just displayed a message saying "out of range" i have a dell studio xps 1800is it my graphics card (it shouldn't be) how do i start x server in a different resolution (if screen resolution is the problem
View 9 Replies View RelatedHow would one block an IP range access to a Debian-based Linux system for say 47.1.1.1. - 48.255.255.255? Would it be with the hosts.deny file? If so, how would it be written in the file? Also, would the system require being restarted for the changes to take effect, after writing to the file?
View 14 Replies View RelatedMy last Linux install was SUSE 6 on an early ISA based Pentium clone. I'm used to Unix / bash from OS X, MinGW, QNX & BeOS... none of these rely heavily on X. But I'm thinking that Linux is so popular, I'm doing a lot of my Windows stuff under MinGW, why not just stick Linux on and be done with it.So I've polled the various distros, I'm a power-user / dev so Ubuntu doesn't seem like me, and I'm not familiar enough with Linux to go Gentoo just yet, but the way I slim Windows and OS X installs down to just what I need. I love apt-get and like FreeBSD installs I've seen, but want some Linux kernel goodness for my self, so I have chosen Debian.
I grabbed the amd64 build of lenny DVD 1, partitioned up and installed a bare system that I can apt-get the bits I want later.Here's the problem... When the install completes rebooting sends the graphical login to a frequency my old Hanns-G TFT can't handle.I can Ctrl-Alt-F1 back to the terminal or boot in single user mode, and everything seems to be good until you go GUI.Here's what I've tried.
I've renamed /etc/X11/xorg.conf to /etc/X11/xorg.conf.oldI ran dpkg-reconfigure xserver-xorgI've reinstalled using both simple GUI and Expert GUI using both kernelsI've tried adding nvidia-* packages with apt-get and aptitudeI remember there used to be a frequency tuner app for SUSE 6 and XFree86, but it seems that sort of thing is depreciated in modern Linux.Info? My GFX card is an nvidia GT 220, the motherboard is an ASUS P5QL Pro, the Monitor (Hanns-G) is attached via RGB HD-15 D-Sub (sadly that's all I have access to right now) and it's native resolution is 1280x1024 4:3 @ 60Hz, but in heXPee it will sync at that resolution at 60, 70, 72 or 75Hz, though it does get fuzzy at 75Hz.I'm fairly certain that X is working, just not at a frequency my screen can display... how can I fix this from single user, or regular bash terminal?
---edit--- Forgot to mention I ran dpkg-reconfigure on the XServer. :s It didn't offer video drivers, only to change from gb 105 keyboard layout and ps/2 mouse. I set the META key to the logo key while I was there, but it wasn't really helpful in any other way.
After a fresh install of debian 5.05 over net it boots then at end of text lcd screen shows out of range. if start in single user then startx it goes out oif range. How can i set it to a range monitor can do?
View 4 Replies View RelatedI have up until now been able to use the add-apt-repository command without issue but right now it keeps returning an IndexError.
The error is below:
Code:
Select allx@y:~$ sudo add-apt-repository ppa:/kilian/f.lux
Traceback (most recent call last):
File "/usr/bin/add-apt-repository", line 122, in <module>
shortcut = shortcut_handler(line)
[Code] ....
IndexError: string index out of range
I have tried using the command with an empty ppa (just sudo add-apt-repository ppa:) but that comes with the same error. Googling the issue only brought up some bugreports of a month back, and I've used the command with success a few days ago.
Basically I'm intending to write serial RX signal handler.Application receives defined packages of data over serial which contains header and payload. Handler should analyse incoming stream and upon detection of header (header is 6B in length) switches to receive payload of length defined in header, then after receiving full message packs it and sends to application for handling.Problem I'm facing is that at random moments in signal I receive errors that "Resource temporarily unavailable" while reading from ttyOx device and I see that sometimes I miss incoming data.Also is it possible that if while I'm handling signal one more signal arrives and it is started to be handled parallel? If it is, what are the ways to prevent it? So I would be sure that no more signals will fire on same peripheral until I will finish handling what I have on my hands now.
Serial open and init:
Code: Select allint open_port(int port_nr) {
int fd; /* File descriptor for the port */
switch (port_nr) {
case 1:
fd = open("/dev/ttyO1", O_RDWR | O_NOCTTY | O_NDELAY);
break;
[code]....