Ubuntu :: Monitor Input Signal Out Of Range / Fix It?
Nov 28, 2010
I basically destroyed my laptop a couple of years ago. Windows XP wouldn't even start but it didn't come with an installation disk. I tried recovering it but it just died. So a few months ago I put a box of thing on top of it which broke the screen! I was going to chuck it out until I stumbled upon a page which told you you could use it as a web server.
I decided to use it to host my website. I installed ubuntu without a problem however it wasn't until I was about to start it up I found out it was against BT's terms and conditions!! So since I installed ubuntu I thought I might as well make use of it and use it to render my files. When I went to turn it on for the second time and plugged it into the monitor it said input signal out of range!
I can see the login screen but I can't move the mouse or anything. I can't access the terminal, how can fix this?
View 9 Replies
ADVERTISEMENT
Feb 15, 2011
I have been trying unsuccessfully to load Debian on my desktop. I have tried both live and otherwise. Both AMD64 and i386. It seems to be loading fine and then all of a sudden the monitor quits with a sign Input signal out of range. I have tried lots of other live disks and they have worked fine. My monitor is a Hanns G and my video card is NVIDIA GeForce8200. All other stuff very normal. 4 Gigs of RAM. What?
View 4 Replies
View Related
Mar 29, 2010
I recently installed Fedora 12 -- a brand new install, not an upgrade. The system was previously using Fedora 11 without any problems. Fedora 12 installed without any issues, and I haven't really done any customization to it. I am running KDE. The system is hooked up a KVM switch.
When I am on system #2 (a Windows system) and I switch back to system #1 (Fedora) after a few minutes of time, the Fedora screen will be blank and the monitor will present an "input signal out of range" error. I can SSH into the box and kill X to get the screen back. This has not happened on this system with any previous versions of Fedora that had been running on it (everything since Fedora 7).
View 3 Replies
View Related
Aug 27, 2010
i installed a program called start-up manager. i fiddled with the display settings cause on startup of the computer my boot screens and etc were out of wack placed halfway across the screen and really pixelated. after changing the resoloution i restarted and just after booting everything goes black and it comes up with the input signal is out of range. ive tried to run livecd or live usb i should say as its on a usb stick. and search for commands to repair my screen settings but cant. ive tried to run grub cause i heard its a repair console by pressing and holding shift it doesnt work ive tried to ctrl alt f2 and other commands during start up non of them work. they all just result in that message popping up.
there is no repair console for me to access during start up. i just want to roll back to before i did this when everything was working. also half the commands given on other threads come up with error messages saying commands were wrong and such. and ive also started up bios to try and change display settings for it to magically work so i can login and change my settings back and nothing happens. im using another computer at the moment to find results.
View 2 Replies
View Related
Mar 31, 2010
i have both windows XP and suse linux installed in my hp pc with monitor HPL1710. when i in stalled Scientific LInux (cern) in the unallocated space using default partirtion it is in stalled. unfortunatately i have choosen the screen resolution to be 1600*1400. So when i try to reboot it says:
Code:
Input signal out of range change settings to 1280*1024-60Hz I have no idea what to do ? I dont find any scientific linux sub forum . so i am sending the thread here.
View 14 Replies
View Related
Apr 28, 2011
I just installed Ubuntu Natty on my desktop which uses an nVidia GeForce 7+ chipset. After installing Ubuntu, I noticed that when the GRUB boot menu should show up, my monitor says "Input signal out of range, change settings to 1600 x 900 - 60Hz", and it stays that way until the Ubuntu desktop shows up. The Ubuntu desktop shows up just fine. It's just that GRUB and Plymouth don't show up and my monitor gives me the aforementioned message.Here's my xorg.conf configuration after I ran the nVidia X Server Settings app:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011
Section "ServerLayout"
[cdoe]...
View 5 Replies
View Related
Nov 7, 2010
this has happened with a few different attempts of ubuntu based distros lately ... i try to boot a live cd it gets to where it starts loading and the monitor pops off and says input out of range ... im aware that this is a known bug with xorg choosing either the wrong resolution or refresh rate ... but what the heck are we supposed to do , i can't get far enough into the boot process that i can open a terminal and try to bypass xorg ... so will all future distributions of ubuntu just be out of the question for me ? if you ask me what needs to be done is make the installer ASK what resolution you want to attempt to boot at .... similar to what puppy does
View 2 Replies
View Related
Jul 25, 2010
I have a HP w1907 monitor and when I boot my PC and get to BURG, the monitor shows the the "input signal is out of range" and to change settings to 1440 x 900 and 60 ghz. This message won't go away until I select an OS to boot. The message blocks the the center of BURG where I select the OS but I can still select the Os although the image is partly blocked by the "Input Signal Out of Range" message. Using BURG-Manager I set the Resolution to 1440 x 900 but I still get the message.
View 9 Replies
View Related
May 1, 2011
While my Ubuntu computer was on the splash screen, my Ubuntu is in a bad resolution and I get the error on my monitor Quote:"Input signal out of range, change settings to 1600 x 900 - 60Hz"I tried editing the GRUB file to changeQuote:
#GRUB_GFXMODE=640x480
to
Quote:
[code]...
View 9 Replies
View Related
Feb 3, 2010
[For those of you who helped me before hand, sax2 wasn't good enough, so I went with the one-click, aaaaand]
Version: 11.2 "Emerald" with KDE
Card: Nvidia FX 5200
Problem: After installing one-click (5xxx legacy drivers), I ran the nvidia-config command and rebooted. Upon reboot, I get a splash screen and then nothing but a monitor error - "Signal out of Range" [Note: After googling this problem, I found a similar thread with an ATI, but since the difference between nvidia and ati is the same as perfect
View 3 Replies
View Related
Feb 19, 2011
Iv'e tried on both CD & USB. Upon Live Boot from the CD I get the first purple screen, then "No Input Signal" on my monitor. Upon Live Boot from USB I've choosen both the Install & Boot options, then It thinks for a minute; and I recieve "No Input Signal". I'm leaning toward it being my "Graphics Card"(NOTHING IS WRONG WITH IT OR ANY OF MY HARDWARE!!!!; but it is an "ATI" ^_^), but thats just a guess. Iv'e Tried Both 32/64 Here Is My Hardware Information... (Everything is Brand New & Full Diagnostics)
Intel Core i7 950
MSI Big Bang-XPower (MS-7666)
DDR3 1333 gSkill Ram (6 x 1gb)
ATI Sapphire Radeon HD 5870 (2 gb Memory, GDDR5)
HANNspree 28" Monitor 1920x1200
View 4 Replies
View Related
Jan 9, 2010
Anyone knows the workaround for Quote: Input Signal Out of Range Change Settings to 1440 x 900 - 60Hz
View 9 Replies
View Related
Jul 17, 2011
I installed edubuntu 11.04 a couple months ago on the kids computer. Everytime we would boot up, we received the signal out of range during the entire boot sequence. However once the login screen showed up, we could see the desktop fine. However, now it will not display anything from the time grub loads it is just Signal out of range. I even let it sit for about 10 minutes. I can boot from the live cd fine...but I'm not sure what to change. How can I fix this issue from the live cd?
View 6 Replies
View Related
Apr 30, 2010
Does anyone know how to stop ubuntu (when loading) looking for wifi signal's in the 5000000 khz range? I have a problem with other devices around my house that operate on this range of frequencies and it effects ubuntu while its booting, to the extent that it won�t load. My wireless router is on the 2000000 khz range therefore I only really need Ubuntu to look for devices on this range of frequencies. If anyone know a way to prevent Ubuntu looking on the 5000000 khz range by editing something I would be very greatful to know how to do this.
As at the moment I am having to boot about 5 times until it eventually decided to load. Sometimes the only way I can get in, is by going into recovery mode, dropping to terminal and typing in: "sudo gdm" and eventually I get it. Which is a right pain. Please see my previous post outlining my problem: [URL]
View 3 Replies
View Related
Sep 21, 2010
I followed the instructions given at http://linuxhub.net/2010/06/fix-big-and-ugly-plymouth-in-ubuntu-10-04-lucid-lynx/ for fixing my ugly plymouth screen after installing Nvidia drivers. All worked as expected. However I made some modifications in the instructions as I required.
Code:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
I used 1366*768 instead of 1280*1024.
[Code]...
View 3 Replies
View Related
Dec 10, 2010
Have a Compaq Presario SR1915AN desktop with a NVIDIA GeForce 6150 LE it has a dual boot of Windows XP and Debian 5.0.6 which would only run in 800x600 mode.I decided to install Ubuntu 10.10 Desktop as this is what is on another different machine, thought it would be safe.The install wouldn't work, I would get the purple selections screen and first time chose the normal graphic mode, 10 seconds or so in to the install the scrren goes dead and i see the "No Signal Input" display show on the screen. Rebooted and selected text mode install, this time it fully installed but on reboot it again has the screen goes dead 10 seconds after you select from the Grub screen.
View 1 Replies
View Related
Mar 25, 2010
when restarting suse 10 , i get an error displaying as Input signal out of reach..even its not going through any of the consoles....but ..when i shutdown the suse system and start suse its going inside without this error...how can i stop the error from occurring while restarting suse...this error occurs only when i restart suse.....when i freshly start suse after shutting down the system...its going well without errors.
View 1 Replies
View Related
May 3, 2011
I had the following problem while i installed fedora on my machine: The boot record was normally read from the installation CD and the boot screen appear, (up to this moment my Graphic Adapter is going fine) then i select the first option (which is the default as well) to boot fedora from the CD, and suddenly my monitor inform me that there is no input signal. I think it might be some driver problem, but my adapter is pretty common i think (NVIDIA GeForce 9600 GT), so its not very likely.
Things i have to note:
1. My Adapter is working on my Windows installation.
2. I manage to install fedora by removing my GeForce 9600 GT and using the on board Graphical Card from my main board.
View 5 Replies
View Related
Jan 3, 2011
Ok, first off I installed the disc after having to holed select for the language to come up then selected the nomodeset option before installing, then I installed, restarted and got no signal. After that I tried to edit the grub like a thread said by changing splash or whatever to nomodeset and it won't allow me to edit.
View 2 Replies
View Related
Oct 16, 2010
I've recently reinstalled a computer with 10.04 for my parents to use, and it worked fine at mine, but after transporting it to theirs and hooking it up to their existing monitor it doesn't seem to work anymore!Well, it boots and I hear it login but I don't get a splash screen and at some point between the bios and the login sound it comes up with Frequency out of Range. On the warning message it displays a frequency of "72.9 kHz / 90.2 Hz" but in the monitor settings its reporting that its operating at horizontal 64,0 kHz and vertical 60.0 Hz. I also don't get any splash screen when starting up, just a flashing _ before the monitor stops things
What I can do however is drop into a the tty console (alt+ctrl+1) and login to the shell but don't really know what things to change from there.Having googled things a bit I've found references to xorg.conf but there's no such thing on my system so I can't edit that to fix this. Likewise I also have found references to fiddling with grub to get into the recovery, but grub doesn't even appear when I boot and I don't know what to press to get it to drop into its menu...
This is really urgent as I need to go home tomorrow at the latest and I want to get my parents system working before then. I also have no spare monitors here and I didn't think to bring with me a liveCD to fiddle with things (only a UNR netbook which I'm posting this from), so the console is the only access I have to the machine.Some specs: Ubuntu 10.04. ATi Radeon 9100 IGP, no proprietary drivers are installed. The monitor is an old CRT that still works beautifully and whose replacement is not an option.
View 3 Replies
View Related
Sep 13, 2010
If I turn off the monitors, I get a black screen (the monitors goes to power save) when I turn them on again.
I have a workaround which involves pressing ctrl-alt and f3 and then ctrl-alt f7. That usually works and brings up the graphical login-screen. And I get my session back.
But sometimes when I log in, my session is gone. It is as if I was logged out or the system has rebooted.
I have two monitors and Nvidia.
View 2 Replies
View Related
Jan 5, 2010
I am facing weired problem while installing Ubuntu 8.04 on my desktop
specification of it
Intel Core 2 duo 2.93
4 GB RAM
500 GB HDD
Intel Motherboard DG41 RQ
it goes on loading ubuntu and then after when i am suppose to get my home screen with bird background to view, monitor stops getting signal.
i tried both 32 bit and 64 bit
ubuntu-8.04.3-desktop-amd64.iso
ubuntu-8.04.3-desktop-i386.iso
but no luck where as 9.10 works like a charm and i have no issue in working with it.
but because of some external H/W drievrs i need to stick to old karnel version which supports 2.6.30 or lower
View 5 Replies
View Related
Mar 6, 2010
i tried to install linux mint, at first i got 'out of range' with black screen msg but used compability mode and got past it and installed mint on my HD. a moment after it updated my nvidia drivers and after reboot I got the out of range message again, which leaves me in the situation where i cant do pretty much anything I tried editing xorg.conf added VertRefresh 60-75 and Modes "1440x900_75.00"
View 4 Replies
View Related
May 7, 2011
I just installed Ubuntu server on one of my computers, but when I boot up the screen goes blank and the monitor gives me an 'Out of Range' error. I understand that this means that the resolution settings are too large for the monitor, but I don't understand how to change them, since there is no GUI installed. Details:
Monitor:
LCD
Recommended Resolution is 1280x1024
I have also tried it on another monitor with a recommended resolution of 1920x1080, This also gave me an OOR error. Ubuntu Server version 11.04
View 6 Replies
View Related
Mar 19, 2011
I use my old computer as an NAS, so I remove the monitor after I installed linux on it (disconnect vga cable). I use ssh to control the machine and it works fine. Until some day, after kernel/softare upgrade or messing up some configs, I cannot connect to it through ssh, then I have to plug the monitor back, but the monitor says "No input signal". So I have to restart the computer WITH the monitor connected, and the monitor's back!
I think the computer/linux kernel doesn't detect the monitor plug-in event. So how can I start my linux box without a monitor, but when it goes wrong I can still plug my monitor (vga) back and use the console.
Edit: just one pci-e video card, has dvi, vga, tv/out (s-video)
Edit2: Xorg is not running. I just need the console (CTRL+ALT+F1). The problem is, if the machine booted without a monitor connected, it won't give me a pseudo terminal after I attach the vga cable while it's running. Clearly the monitor is not auto detected as usb device. I'm wondering how to let the monitor auto detected.
View 2 Replies
View Related
May 23, 2010
So my computer works reasonably fast running XP (old 3GHz processor with 512RAM), but every so often it simply freezes. I've tried all I can to fix this, but sometimes when I boot up XP it'll get to the window's logo then freeze, sometimes it'll get all the way to the desktop and then freeze, and sometimes it'll start up, run fine for an hour or two then freeze. By freeze, I mean the screen doesn't update, the keyboard and mouse do nothing. Updating NVIDIA drivers doesn't seem to help - some make it worse! So I've had enough, and decided to download Wubi to try Ubuntu on it. I'm not ready to remove windows just yet (lots of data on this machine) and so I don't really want to try dual-booting yet.
Wubi downloads and runs in Windows fine. When I go to restart, after picking Ubuntu from the menu it shows a little text (I think about installation, and press Esc for menu) then my monitor gives a "No Signal" message. So I try restarting (pressing the button), and pressing Esc to bring up the menu. I tried all 5ish options, and "Safe graphics mode" and "ACPI workarounds" seem to last longer, but the same error occurs, before it has even prompted me (still doing its own thing). So I can get up to GRUB, and even get into the grub> prompt. I tried adding irqpoll and/or all_generic_ide to the boot thing (pressing e in the grub menu), but that hasn't helped. I'm unsure of how to find what hardware my computer has (only computer, don't have receipt), but I know "NVIDIA GeForce 6600 GT".
View 9 Replies
View Related
Sep 22, 2010
I am looking for a tool that can monitor my 3g signal.
View 6 Replies
View Related
Jul 2, 2010
i just did a graphic install of debian lenny and when i finished the installation and restarted the computer the grub boot menu appeared and i selected debian and nothing happened the monitor just displayed a message saying "out of range" i have a dell studio xps 1800is it my graphics card (it shouldn't be) how do i start x server in a different resolution (if screen resolution is the problem
View 9 Replies
View Related
Aug 4, 2010
I have recently got the Linux bible 2010 and it came with a cd and dvd containing multiple distro's of linux. I have tried them all with the same problem. Everything until the actual GUI desktop shows up from the live disks as well as an actual debian install, when I get to the desktop however out of range shows up. I have a video card hooked up, figured that might be the problem, it was not. I tried the on-board video and it also did the same thing. I also tried a different monitor, which did not work.
View 3 Replies
View Related
Oct 4, 2010
I am a Windows Server guy trying to stay afloat on this Linux installation I am doing so please bear with me. I have installed RHEL 5 and installed the updated NVIDIA 256.53 certified driver. Upon rebooting everything was great. I got to the X server login and entered my user name and password. The very next thing I see is "Out of Range" error on my monitor. I know that I needed to verify that my xorg.conf file had the proper refresh rates specified in it for my monitor, which I have done.
View 3 Replies
View Related
