Ubuntu :: How To Do Manual Recovery
May 16, 2011Does anyone know how i can do a manual recovery?
View 4 Replies
ADVERTISEMENT
Ubuntu :: Press S To Skip Mount Or M For Manual Recovery
Oct 30, 2010I have installed Ubuntu 10.10 x64 bit edition. On booting Ubuntu wouldn't mount my partitions, so I installed pysdm to auto mount them during booting. But since then I often get during boot: Press S to skip mount or M for manual recovery. What should I do?
View 1 Replies View RelatedUbuntu :: Press C To Continue To Wait Or Press S To Skip Mounting Or M For Manual Recovery?
Mar 23, 2011I'm randomly getting 'Continue to wait; or press S to skip mounting or M for manual recovery...' or something like that at boot ((it flashes very quickly)- If I don't press anything, I'm prompted for my password (I configured it to login with password) and the desktop loads...
I'm using Ultimate Edition 2.6.1 -> Ultimate Edition Home
I was using my 1TB hdd to dual-boot linux, windows, and for storage...Yesterday, I imaged the linux partition, and restored it to an approximately 66GB partition I created on a 150GB hdd...Besides the 66GB partition, the rest of the 150GB hdd is 'unallocated space'... That's when the above message started...Below are screenshots of the fstab and partitions as they are now...
Ubuntu :: Mount Failure - Press S To Skip Mount Or M For Manual Recovery
Jan 16, 2011I saw a post where you were faceing "Type s for swith or M or mannual restore"
I got the same message. I tried S but nthing happend then I tried M. it took me to root@ubuntu:/#
How i restore it manunally or if not possible I need to back up the data to pend drive
but i cant find the pendrive in the home section.
Ubuntu :: An Error Occurred While Mounting /proc/bus/usb - Press S To Skip Mounting Or M For Manual Recovery
Apr 30, 2010Quote:
an error occurred while mounting /proc/bus/usb - press s to skip mounting or M for manual recovery
I'm getting this error while booting.
Ubuntu :: Error "There Was An Error Mounting /var/run Press S To Skip M For Manual Recovery"
Jun 14, 2011not solved the correct way, reloaded using the backup i had the foresight to make i separated / into 3 partitions (/, /tmp, and /var) and after a lot of work (and hair pulling) i can now boot and login but i am getting these 2 errors during bootup
There was an error mounting /var/run Press S to skip M for manual recovery
There was an error mounting /var/lock Press S to skip M for manual recovery
[Code]....
Ubuntu :: Recovery Menu (in Recovery Mode) Does Not Work?
Aug 18, 2010I've got a, as it seems to me, strange problem.I've inadvertently deleted my user from the group admin so I'm in the same situation of a lot of other users (read a lot of messages about it).My problem is that when restarted in recovery mode there is no way I can choose the 'drop to the root shell' or similar in the menu.The menu appears for a second and then I've got an empty screen. If I press a key I've been requested for a username and password that of course is not what I need.
View 2 Replies View RelatedUbuntu :: Cannot Set Manual Resolution?
Apr 30, 2010My Monitor is a Acer X223HQ which has a native max resolution of 1920 x 1080. I can easily achieve this is windows vista, but on ubuntu I am limited to 1360 x 768.I have tried manually adding the resolutions to xorg.conf which puts the Xserver in low graphics mode upon restart.this as I dont want resolution to ruin my experience.Running Ubuntu 10.04 LTS, graphics GPU is an intel G41 chipset.
View 7 Replies View RelatedUbuntu :: KVM Vs Manual Switch
Jun 6, 2010I have bought three different kvm switchs to connect a Win 7 and a Ubuntu 10.04 system (two different towers). After plugging in any of the KVM switchs the ubuntu system wont display correctly. It either blinks or is completely black.Because of this I researched this problem and decided to go with a manual switch. My question is if anyone has had experience with a manual switch and if adding an agp video card would hinder performance with a switch.
View 4 Replies View RelatedUbuntu :: VNC With SSH / Error In Manual?
Jan 11, 2011how to use create a ssh tunnel for vnc. I have fought with this explanation for some days, and hopeless trial and error finally worked. Here is the explanationEach time you want to connect to your PC, follow these steps:
Find your PC's public name or IP address. Unless your PC has been assigned a memorable name, the easiest way to do this is to go to whatismyip.com from your PC. You can assign your PC a name by getting one from a dynamic DNS provider.Start the SSH client on the computer you'll log in from.Tell the SSH client to use local port-forwarding to connect port 5,900 on your desktop to port 5,900 on localhost.Via the SSH client, run the command x11vnc -safer -localhost -nopw -once -display :0 on the computer whose desktop you will view.where someone suggests to create a local port forward. The person who asks in this thread, has apparently read the same manual as I. The suggestion works, but I am not entirely certain that I have created a secure connection by "locally" forwarding port 5900 on the phone to localhost:5900. Can someone confirm this?Am I correct in assuming that the line "Tell the SSH client to use local port-forwarding to connect port 5,900 on your desktop to port 5,900 on localhost." in the explanation should read "on your remote laptop"?
Ubuntu :: User Manual Available For Xubuntu?
Mar 25, 2011is there a user manual available for xubuntu 10.10 if there is i cannot find it anywhere, could someone point me in the right direction.
View 3 Replies View RelatedUbuntu :: Manual Or Auto Partition?
May 1, 2011I'm downloading linux right now and was wondering what the difference between manual and automatic partition is. If manual partition is better can someone tell how to do it?
View 2 Replies View RelatedUbuntu :: Manual Css Override, When External Css Exists?
Jan 15, 2010I have an external css filewith...
Code:
#bg {
margin:0 auto;
[code]....
Ubuntu Networking :: Manual Update Of Ifconfig?
Mar 29, 2010To get internet access on my second computer I have to follow the manual routine detailed below:
sudo ifconfig eth0 down
sudo ifconfig eth0 hw ether ..........
sudo ifconfig eth0 up
sudo ifconfig eth0 ....... netmask ........ broadcast ........
sudo route add default gw .........
where the various ........ represent the relevant addresses. This is necessary because my ISP only recognizes one computer - my first one. The above works fine, I simply copy and paste the above from a text document, but I would like to know which files I can alter/create so that all the above is achieved automatically when I boot my second computer.
Ubuntu Installation :: Startup Without Any Manual Interference?
Jan 4, 2011The upgrade messed up my gnome-panel. When on the tty1 console, I enter sudo killall gnome-panel && sudo gnome-panel and then it works but how do I fix this the "normal way" so that it can be normal as of the startup without any manual interference?
View 5 Replies View RelatedUbuntu :: Software For Creating User Manual?
Mar 4, 2011I was wondering which software do you use to create user manuals? Like in windows we use .chm files for user manuals and there are .chm file creators available.
In Ubuntu, what do you use?
Ubuntu Installation :: Formatting The Manual Partitioning 10.04?
Jun 18, 2011trying to manually partition while installing 10.04, unfortunately from an old windows os, which came w/ the computer. i probably shouldn't bother to save it, but i wanted the practice w/ partitioning. the book i'm using is a good one, but maybe too advanced, and didn't specify. when i shrank the old win os into a smaller space on the drive, it gave me the option to check a box for format or leave it unchecked. which should i do, so as not to delete what's already on the drive? and do i mount it anywhere? in /windows, or i think the other option was msdos? what results in each case?
View 9 Replies View RelatedUbuntu Networking :: Configure Manual IP Via Network Manager?
Apr 25, 2010Networkmanager applet does not allow setting ip address manually. The "Apply" button is grey. Is this a bug?
View 3 Replies View RelatedUbuntu :: Package Dependencies From Manual Compiled Packages
Jun 29, 2010I have compiled FFMPEG (and also mplayer and x264) from scratch to always run the latest version. I install ffmpeg using "checkinstall". When compiling FFMPEG manual and installing with checkinstall ffmpeg provides the following libraries: libavutil49, libavcodec52, libavdevice52, libavformat52, libavfilter0, libpostproc51, libswscale0
These can NOT be installed via apt-get (or similar) or the checkinstall will fail. So I have not installed them. The problem now is when I need to install a package (.dep or from Synaptic) that requires one of these a prerequisite. Then it is not "registered" by Synaptic that these are already provided through the FFMPEG build. I have tried to use the --provides flag on checkinstall and I can also see in Synaptic that on the ffmpeg package I installed with checkinstall that it says it provides said packages. I even have tried to modify the checkinstall script and add:
Replaces: libavutil49, libavcodec52, libavdevice52, libavformat52, libavfilter0, libpostproc51, libswscale0
This also triggers Synaptic to list that ffmpeg replaces the packages. But still when I try to install anything that needs these packages it is not recongnized that they are provided by FFMPEG and when I install one of them (e.g. apt-get install libavformat52) then it replaces the FFMPEG library and FFMPEG stops working. So what is going wrong? Is this a bug in Synaptic? How is it possible under ubuntu to install manual compiled packages and have them "act" as correct dependencies for others?
Ubuntu :: Meaning Of 2 To 3 Command - Hasn't Got Manual Page
Jul 22, 2010My system (ubuntu 10.04) has a command called 2to3. What exactly is it? it hasn''t got a manual page.
View 2 Replies View RelatedUbuntu :: Startup Applications Works Only With Manual Login
Nov 23, 2010Has anyone ran into a problem running Startup Applications from automatic login? I have checked to see that it is not loading in fail-safe mode, and if i disable the automatic login it works fine. The file it is loading is located in my home directory and being executed as
"sh /home/myusername/script.sh"
Ubuntu :: Manual Grub Entry Not Appearing After Booting
Jan 13, 2011I have added a manual entry to /etc/grub.d/40_custom and ran update-grub and the entry is added to /boot/grub/grub.cfg OK. But when booting the entry is not appearing. I am a bit stumped trouble shooting this as there are no errors.
View 9 Replies View RelatedUbuntu Networking :: Manual Wireless Interface Configuration?
Mar 30, 2011I am trying to manually configure my wireless interface similar to how I manually configure my wired interfaces on Ubuntu 10.10 (Maverick Meerkat). I have two wired interfaces that use static IP addresses. I set up these interfaces using /etc/network/interface file. I disabled network manager (it was never working correctly to start with). Now, I want to connect my wireless interface (wlan0) to an unsecured wireless private network. I know/can find out all the information about the wireless network (ssid, etc). Also, I need to do this without disconnecting either of my wired interfaces.
I have looked all over the internet/forums for information about how to set up this interface, but nothing I found meets my need. Is there any way I can use iwconfig or the interface file to connect to this wireless connection? Or is there any other tool that will allow me to manually do this?
Ubuntu Installation :: Getting 11.04 With Manual Swap On A Dell Laptop?
May 21, 2011I am trying to insall 11.04. Here are my current computer specs
Dell Inspiron N4010
Intel Core i5 M460 @ 2.53 Ghz
4 GB RAM
64- bit Windows 7 Home Premium
I have a single HD with three partitions currently,
1. Primary Boot Partition for Windows - 475 GB (100 GB free)
2. Recovery Drive for Windows - 9.88 GB
3. OEM Partition - 361 MB
Now I shrank my primary volume giving the ubuntu installation drive around 30 GB (enough?). However, I am unable to make a swap partition because dell laptops apparently do not allow more than 4 partitions?I read somewhere that it does not allow more that 4 primary partitions, but we can have more logical drives in an extended partition. I am totally confused about this. How do we do it then? Can a swap partition be a logical drive? Also, I heard (I may be completely wrong) that there are some MBR issues when you install Ubuntu alongside Windows 7.
Ubuntu :: Dual Booting Windows - Manual Partitioning
Jul 24, 2011I currently use Ubuntu full time, but on my new one I am planning to dual-boot. My new computer will have a 500GB HD and 4GB Memory. I plan on using Ubuntu more than Windows, specifically for internet applications etc. Windows I plan on using for media and such. I will be partitioning the hard drive manually, and would like to know how much room I should give each OS, how to create a large section for all my files to swap (how does swapping work?) and any other partitions I need to make for recovery. I've read the Ubuntu and Windows "How to Dual-Boot" tutorials, and I still feel kind of lost on a general size for partitioning each section.
View 9 Replies View RelatedUbuntu :: GIMP User Manual (from Help Menu) Odd Sequence?
Jul 30, 2011Noticed in 10.04, under GNOME, opening the GIMP user manual from the help menu opens it in the help browser in a strange order:index, preface, iii, ii, biblio, A, B, C, i ...Not sure if this is the right place to mention this.
View 1 Replies View RelatedUbuntu :: 11.04 Manual Partitioner - Cannot Enter Mount Point?
Jun 18, 2011I am installing 11.04 on a test PC. My standard drive layout, developed over many years and many distros is as follows:
sda1 /
sda2 /home
sda3 swap
[code]....
General :: Get Manual Of Tcpdump?
Apr 14, 2011How to get manual of tcpdump?
View 2 Replies View RelatedRed Hat :: Manual Page For X Is Missing (man X)?
Sep 10, 2010Running Centos 5.5. Man page for X ( General information: X(7) ) is missing. Others like Xorg(1) and Xserver(1x) are present.
View 9 Replies View RelatedUbuntu Installation :: Manual NVIDIA Driver Uninstall Headache?
Jan 15, 2010Long ago (Back in the Intrepid Ibex days) I ran a manual upgrade of NVIDIA drivers from NVIDIA's website, in an attempt to get Wine running better on my system. Now every time I run upgrade manager, this message (or something similar) pops up twice every time I run upgrade manager:Code:The system has detected an obsolete NVIDIA driver in your system.Please install nvidia-glx-185 at the end of the installation with the following command:sudo apt-get install nvidia-glx-185The removal of other NVIDIA drivers will be dealt with automatically.I actually have nvidia's 190 drivers installed, so the error message is a bit of a misnomer.This message has been persistent with every upgrade, and appeared many times during the Karmic upgrade.
Now I understand when I did this originally every time I get a kernel upgrade and rebooted I'd need to reinstall NVIDIA's drivers. But ever since my Karmic upgrade, things seem to be a bigger hassle than normal.. The system almost locks up after reboot. Compiz now seems crippled and I've disabled it just to get a decent framerate.What I'd really like to do is go back to Karmic's NVIDIA drivers and not have to deal with update problems anymore.However, when I attempt to reinstall Karmic's NVIDIA drivers, I just can't seem to make this error message go away or get the drivers to work. I end up frustrated an hour later, reinstalling NVIDIA's drivers because something is broken and I just can't get jaunty's drivers working at all.