Ubuntu Installation :: Formatting The Manual Partitioning 10.04?
Jun 18, 2011
trying to manually partition while installing 10.04, unfortunately from an old windows os, which came w/ the computer. i probably shouldn't bother to save it, but i wanted the practice w/ partitioning. the book i'm using is a good one, but maybe too advanced, and didn't specify. when i shrank the old win os into a smaller space on the drive, it gave me the option to check a box for format or leave it unchecked. which should i do, so as not to delete what's already on the drive? and do i mount it anywhere? in /windows, or i think the other option was msdos? what results in each case?
View 9 Replies
ADVERTISEMENT
Oct 14, 2010
I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
View 7 Replies
View Related
Jul 24, 2011
I currently use Ubuntu full time, but on my new one I am planning to dual-boot. My new computer will have a 500GB HD and 4GB Memory. I plan on using Ubuntu more than Windows, specifically for internet applications etc. Windows I plan on using for media and such. I will be partitioning the hard drive manually, and would like to know how much room I should give each OS, how to create a large section for all my files to swap (how does swapping work?) and any other partitions I need to make for recovery. I've read the Ubuntu and Windows "How to Dual-Boot" tutorials, and I still feel kind of lost on a general size for partitioning each section.
View 9 Replies
View Related
Jan 22, 2011
I have only known about Linux software for the past couple of weeks. I want to install Ubuntu 10.10 on an older desktop I have so I can become more familiar with it. I am average in knowladge about Windows OS and MS-DOS. I tried to install Ubuntu and I get an error message about the harddrive. The CD I am booting with will load on my other PC with Windows XP on it. I have only let it run on it long enough to verify that it is bootable.
I have made a floppy boot disc following the instructions on another Linux site about Ubuntu. I have also tried to boot my alternate PC with the floppy and it boots up. The harddrive on my working PC is a Maxtor 40gb formatted with NTFS file system. The harddrive in the older desktop is a Western Digital 80GB WD800LB-55DNA0.It worked fine with Windows XP on it. I also made a Western Digital DATA Lifeguard for DOS floppy and it boots with it.
View 14 Replies
View Related
May 1, 2010
I don't want sympathy, but merely explain what I'm up against. I'm 63 years old. I'm on medical and mental disability (Cognitive failure, the beginning of Alzheimer's). I used to be a good computer tech, but now, because of my memory problems, I don't remember how to do a lot of things with a computer.I'm seeking assistance (not 24/7 help or hand-holding)to help me reformat,partition, and set-up a dual-boot for both WIN 2000 Pro and Ubuntu Linux to operate programs where I can use my Amateur (Ham) Radio in digital modes (PSK-31, PSK-64, BPSK, cw, etc). I'm choosing NOT to run Ham Radio DeLuxe, as it's bloated with M$ "code" and could be hacked and messed with.
The hard drive is a Maxtor 80 gig (78 g formatted). I have another drive,a Western Digital 40 gig (37 g formatted) that I use for Windows as well, but mostly it contains Excel spreadsheets with Part 90 - Public Safety frequency information for the local (within 250 miles) from my home. It's a FAT 32 and I'd like the 80 gig to match that
View 3 Replies
View Related
Jan 5, 2016
What is the recommended method these days for command line partitioning and formatting for the Terabyte size hard disk.?
It was easy to keep up when your working or have access to hardware for re-purposing, but that has all dried up and my knowledge has been left behind. The problem(s) are with new, recent hardware
Following a crash from a now detectable faulty stick of RAMM, I've lost one of my data hard disks and my fiddling with replacement seems to leave various errors/warnings mainly about GPT not supported and this message is still present despite trying fdisk, cfdisk, gpart, gparted, and(?).
System is an ASUS mobo using SATA drives (root 500Gb: MBR+3 partitions;/, swap, /home), and two 2.4TB with single partitions.
View 5 Replies
View Related
Jan 4, 2011
The upgrade messed up my gnome-panel. When on the tty1 console, I enter sudo killall gnome-panel && sudo gnome-panel and then it works but how do I fix this the "normal way" so that it can be normal as of the startup without any manual interference?
View 5 Replies
View Related
May 21, 2011
I am trying to insall 11.04. Here are my current computer specs
Dell Inspiron N4010
Intel Core i5 M460 @ 2.53 Ghz
4 GB RAM
64- bit Windows 7 Home Premium
I have a single HD with three partitions currently,
1. Primary Boot Partition for Windows - 475 GB (100 GB free)
2. Recovery Drive for Windows - 9.88 GB
3. OEM Partition - 361 MB
Now I shrank my primary volume giving the ubuntu installation drive around 30 GB (enough?). However, I am unable to make a swap partition because dell laptops apparently do not allow more than 4 partitions?I read somewhere that it does not allow more that 4 primary partitions, but we can have more logical drives in an extended partition. I am totally confused about this. How do we do it then? Can a swap partition be a logical drive? Also, I heard (I may be completely wrong) that there are some MBR issues when you install Ubuntu alongside Windows 7.
View 2 Replies
View Related
Jun 22, 2010
I am giving away a laptop with dual boot XP and Ubuntu. Partitions:
To erase all old files, I plan on burning an Ubuntu live CD and enter in the terminal:
And leave sda1 and sda4 untouched just in case the new owner wants to reinstall Windows in the future.
But how should I use the free 75GB ? Install Ubuntu on a 35GB extended partition and leave the remaining 40GB empty for XP, if wanted? Or should I use the entire 75GB for Ubuntu ?
View 3 Replies
View Related
May 23, 2010
I got 10.04 RC and 3 patitions: / , swap and Home.How to install system without formatting Home partition?
View 2 Replies
View Related
Jul 15, 2010
I want to install Ubuntu 10.04 on drive C. my files are on drive D.. so i don't want to format drive D during the installation of Ubuntu.
View 5 Replies
View Related
Aug 2, 2010
I would like to format my current NTFS drive to EXT4. I've searched and found there are two commands to do this, mkfs or mke2fs.
What are the proper steps to do format an NTFS to EXT4 ?
If you recommend EXT3 over 4,
View 4 Replies
View Related
Jan 15, 2010
Long ago (Back in the Intrepid Ibex days) I ran a manual upgrade of NVIDIA drivers from NVIDIA's website, in an attempt to get Wine running better on my system. Now every time I run upgrade manager, this message (or something similar) pops up twice every time I run upgrade manager:Code:The system has detected an obsolete NVIDIA driver in your system.Please install nvidia-glx-185 at the end of the installation with the following command:sudo apt-get install nvidia-glx-185The removal of other NVIDIA drivers will be dealt with automatically.I actually have nvidia's 190 drivers installed, so the error message is a bit of a misnomer.This message has been persistent with every upgrade, and appeared many times during the Karmic upgrade.
Now I understand when I did this originally every time I get a kernel upgrade and rebooted I'd need to reinstall NVIDIA's drivers. But ever since my Karmic upgrade, things seem to be a bigger hassle than normal.. The system almost locks up after reboot. Compiz now seems crippled and I've disabled it just to get a decent framerate.What I'd really like to do is go back to Karmic's NVIDIA drivers and not have to deal with update problems anymore.However, when I attempt to reinstall Karmic's NVIDIA drivers, I just can't seem to make this error message go away or get the drivers to work. I end up frustrated an hour later, reinstalling NVIDIA's drivers because something is broken and I just can't get jaunty's drivers working at all.
View 3 Replies
View Related
Apr 30, 2010
Installing Kubuntu 10.04 Lucid AMD64 from a live CD. During manual partition (allocating mount points to existing partitions), the installer crashes. It just vanishes and drops back to clear desktop of the live CD. The error check from the CD boot menu reports no errors. Running the installer from the CD boot menu (instead of running the live CD first) gives similar symptoms. At the same point in manual partitioning, the installer crashes to a black screen, then starts a live CD session of KDE.
This hardware installed the beta version of Kubuntu Lucid 10.04 AMD64 without error, and has run earlier versions of Kubuntu without this problem.
It looks like a bug to me, so posted on launchpad ...
https://bugs.launchpad.net/ubuntu/+s...er/+bug/572622
View 4 Replies
View Related
Jun 24, 2010
After upgrading Ubuntu from 9.10 to 10.04, the cron daemon no longer runs automatically upon starting up the machine; I need to enter "sudo service cron start" to get it running. Is there a way to get it to start up by itself?
View 3 Replies
View Related
Jan 25, 2011
I have installed a dozen dual boot XP / Ubuntu boxes, however this one has me stumped. After the installation failed in the partitioning phase I tried manually partitioning which also failed. Then I went to using a Gparted LiveCD. I can resize the NTFS partition fine each time rebooting in XP and it is OK. However when I shrink the NTFS then try to add an ext4 (or ext3) right after the NTFS it acts like it is working, then when it says "complete" the disk disappears out of Gparted and it shows no devices. If I reboot into the LiveCD it shows a blank second partition, if I try to format it in ext4 I get the exact same results. If I go to Windows it will show an unknown healthy partition. If I grow the NTFS back to the full 60Gb it seems to work fine. It just won't create a second primary ext4 partition.
View 1 Replies
View Related
May 5, 2011
I have a new installation of 11.04 with an ATI Radeon HD 2400 video card that previously worked fine under an earlier release.
I tried installing the proprietary drivers through the Additional Drivers section, rebooted and the video is choppy (dragging windows, etc).
From other reports around the Internet I've read, it's clear I'm not the only one experiencing this issue.
I tried the manual instructions, which turned out to be a mess and ultimately didn't work, either.
View 3 Replies
View Related
May 6, 2011
Having just upgraded to Ubuntu 11.04 from 10.10 I noticed that my Grub menu had not upgraded. The upgrade was not as straight forward as it should have been as the PC hung at the end of the installation resulting in a reboot and running dpkg in safe mode to get it all back up and running.
To fix the incorrect grub menu.lst file which was not updating, I renamed the original file and then ran sudo update-grub. It generated a new and correct file. However, my Windows partition was not listed as a Grub menu option.
[Code]...
View 2 Replies
View Related
Jun 18, 2011
I am installing 11.04 on a test PC. My standard drive layout, developed over many years and many distros is as follows:
sda1 /
sda2 /home
sda3 swap
sda4 /data
/ and /home are relatively small. I put most data files on /data to facilitate hot backup of important data to another drive or machine.
/ and /home are periodically cold backed up with g4l. That said...I noticed that the install partitioner in 11.04 only allows me to select from a list of mount points. / home var etc. I can not type in a mount point of my liking as I have done since I started using Ubuntu about 6.4.Is this Canonical's idea of an improvement?Yes I can manually format the /data partition after install and add it to /etc/fstab. Still I would give Canonical three thumbs down on this enhancement.
p.s. The above seems to be a moot point as the installer refuses to install the boot loader. I have filed a bug report. It makes no difference if I partition the disk manually or allow the installer to partition it to its defaults. If it ain't broke, break it.
View 9 Replies
View Related
Mar 28, 2011
i have a dual booting the first one being ubuntu 10.04 within which i have installed windows7.Unfortunately,i've formatted that part of my hard disk in which i've had ubuntu. Now my problem is i cant load into any of the two os and i dont want to loose my vital data in the system.I've tried booting using the live CD but in vain.i desperately need my info in my laptop.
View 3 Replies
View Related
Aug 1, 2011
I'm trying to format a 500 GB external drive with gparted in ubuntu 10.10 (I searched & didn't see this issue in the forum). I set up and formatted two partitions, one for fat32, and the other with ext3, which appears to format ok, but I can't use it. Both partitions show up and appear to mount, but the ext3 partition won't accept activity (make new folder, copy in files), while the fat32 partition works fine. Both partitions show up ok when I query in terminal "sudo fdisk -l"
View 4 Replies
View Related
Aug 13, 2010
I recently upgraded to Lucid (x86_64) on an HP dv2 laptop, and after doing so, the system will not resume after a suspend (with fglrx installed from the "official" repositories). After reading a lot about the problem, I have seen that updating to the latest ATI driver had fixed this issue for some, so I would like to try that.
I am following the guide at at cchtml.
First, I tried installing the Ubuntu-X team's drivers. However, after (successfully) adding their repository, an update does not fetch their packages:
Code:
It looks like both the xorg-edgers and ubuntu-x-swat repositories are being ignored? (If I'm reading that correctly.) If I open the window System->Administration->Software Sources, I can see that the ubuntu-x-swat repository is checked, so I'm confused why it's being ignored.
If I try to demand the fglrx-installer package, I get an error that it cannot find this package.
Code:
I have the same issues for xorg-edgers and ubuntu-x-swat.
Finally, if I try to build the official ATI v10.7 drivers myself, I get an error that Linux is an unrecognized architecture!
Code:
I have installed all preliminary packages suggested in the guide:
Code:
I really can't understand why I'm unable to build the package from ATI myself.
View 3 Replies
View Related
Sep 21, 2010
I am in the midst of upgrading my F11 computer to F13. I have run PreUpgrade, and the files have downloaded, it's restarted and now it's asking me to do the Manual TCP/IP Configuration. I have only enabled IPV4. It's asking for the following info (which I can't seem to get right)
[Code]....
The IP I want the computer to have is 192.168.0.5, my router is 192.168.0.1, my subnet is 255.255.255.0 I don't know what the Name server is for. Do I need to put the above into into any of the fields above? I've tried a few times but with no luck.
View 3 Replies
View Related
Jan 18, 2010
I'm having trouble installing Ubuntu on a brand new HP DL380 G6 server. Any time I go through the install, it freezes at 33% of formatting the first partition. I have tried 9.04 server disk, 9.10 server disk, and 9.10 desktop (all AMD64). I'm running out of ideas to troubleshoot. The server is listed as supported by Ubuntu 9.04. Here's more of the hardware:
2x quad-core Intel Xeon X5550 procs
16GB of RAM
5x 300GB SAS drives in RAID-5 array (1.2TB useable)
I just finished installing with the 9.10 alternate install disk (AMD64), and after reboot, it doesn't seem to find the boot partition and just sits there after attempting to boot from CD and hard disk.
View 2 Replies
View Related
Jun 9, 2010
I just purchased a new MSI WindTop AE2220 with a 320 GB hard drive running Windows 7. I want to dual boot until I know I have found all of the appropriate drivers. The confusing part is that the computer came with 4 partitions as displayed in the attached screenshot jpeg. How would you recommend I resize and partition my drive?
Current Partitions (in order):
Recovery Partition 14.65GB / 14.45 free
Active Recovery 100 mb / 100 mb free
OS-Install (c) 68.36GB / 42.06 GB free
Data (D) 214 GB / 213 free
Will install Lucid 10.04
View 2 Replies
View Related
Nov 11, 2010
I am installing UNR 10.04 but I get stuck at the partition because I want to dual boot with windows and I am afraid to go far without professional advice. What i want to do is install ubuntu on my D:/ drive and keep xp on my C drive. This is the current state of my hard drives at the moment (screenshot.png). I don't know what all the boxes to the right are for either. Also my D drive (which I want ubuntu on) has ext4 on it from a previous failed attempt to install linux mint. Because of this when I go to install ubuntu it shows xp on the C drive and linux mint on the D drive although the installation was botched and I cant really boot into linux mint. I have provided a screenshot of this too (screenshot-1.png). How to install UNR on my D drive properly. Iknow I need to add a swap partition how do I do that?
View 9 Replies
View Related
Oct 11, 2010
I have a server running an older version of Ubuntu and with /var stored on a separate partition on a separate hard drive. I am attempting to update Ubuntu to 10.04, but I still want to store /var on a separate partition and hard drive. However, I don't want to format the drive which currently contains /var, as it has important data.
Is there some way to have 10.04 set up the new /var on this separate drive at installation, without formatting the drive and losing the old /var?
View 1 Replies
View Related
Feb 16, 2010
Having an issue with a fresh install which gets stuck at partitions formatting 33%. Tried different HDD's, 2 optical drives, 4 sticks of RAM, different SATA cable, disconnect floppy. Have tried both normal and alt cd images using different burn speeds.
View 5 Replies
View Related
Apr 24, 2011
I'm trying to install Ubuntu 10.10 on a brand new 500GB hard drive I just purchased and installed in my machine. I boot from the CD and instruct Ubuntu to install to this drive and tell it to "erase and use the entire disk" for this 500GB drive. After moving forward from that, I see it saying a message about creating an ext4 partition for root "/" and then shortly after the entire install dialogue goes away. All I am left with is the little circle cursors spinning round (mouse input still works) and the installation background. The HDD activity light was still on though. I gave it about 3 hours before I finally gave up and tried again.
When I tried again, I saw that it did create two partitions (root and swap) during the last attempt. The same thing happened, although now even mouse input isn't responding so my system is completely locked up. HDD activity remains active this time as well. Running Ubuntu from the CD works fine. The only problem I saw with it was when I ran gparted from the CD and tried to manually create a ext3 partition on my new disk drive. When I tried that, I ran into a similar occurrence (couldn't run any programs, eventually system locked up) and had to reboot.
I have a second hard disk but I have a lot of valuable data on that and don't want to mess around with it. It could be a hardware failure, but that seems unlikely to me as this is a brand new Seagate disk drive. I suppose I could try installing it on a spare partition on my other drive and see what happens, but other than that I'm out of ideas.
View 3 Replies
View Related
Apr 23, 2010
how much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
View 2 Replies
View Related
