Ubuntu :: An Error Occurred While Mounting /proc/bus/usb - Press S To Skip Mounting Or M For Manual Recovery
Apr 30, 2010
Quote:
an error occurred while mounting /proc/bus/usb - press s to skip mounting or M for manual recovery
I'm getting this error while booting.
View 9 Replies
ADVERTISEMENT
Mar 23, 2011
I'm randomly getting 'Continue to wait; or press S to skip mounting or M for manual recovery...' or something like that at boot ((it flashes very quickly)- If I don't press anything, I'm prompted for my password (I configured it to login with password) and the desktop loads...
I'm using Ultimate Edition 2.6.1 -> Ultimate Edition Home
I was using my 1TB hdd to dual-boot linux, windows, and for storage...Yesterday, I imaged the linux partition, and restored it to an approximately 66GB partition I created on a 150GB hdd...Besides the 66GB partition, the rest of the 150GB hdd is 'unallocated space'... That's when the above message started...Below are screenshots of the fstab and partitions as they are now...
View 9 Replies
View Related
Jun 14, 2011
not solved the correct way, reloaded using the backup i had the foresight to make i separated / into 3 partitions (/, /tmp, and /var) and after a lot of work (and hair pulling) i can now boot and login but i am getting these 2 errors during bootup
There was an error mounting /var/run Press S to skip M for manual recovery
There was an error mounting /var/lock Press S to skip M for manual recovery
[Code]....
View 3 Replies
View Related
Jul 6, 2010
I've got the F13 LiveCD that I was able to boot and use using the "nomodeset" boot option. From the desktop I'm trying to perform an Install to Hard Drive. I've read the Install from LiveCD post regarding the creation of a /boot partition and a / root partition. I've tried creating them without the LVM group and with. But every time I appempt to install I get...
An error occurred mounting device proc as /proc: mount failed: (9, None). This is a fatal error and the install cannot continue.
Hardware is a Sager 8887 (P4, 3.06HT, 60GB HDD, Radeon 9000 graphics adapter)
View 7 Replies
View Related
Oct 30, 2010
I have installed Ubuntu 10.10 x64 bit edition. On booting Ubuntu wouldn't mount my partitions, so I installed pysdm to auto mount them during booting. But since then I often get during boot: Press S to skip mount or M for manual recovery. What should I do?
View 1 Replies
View Related
Jan 16, 2011
I saw a post where you were faceing "Type s for swith or M or mannual restore"
I got the same message. I tried S but nthing happend then I tried M. it took me to root@ubuntu:/#
How i restore it manunally or if not possible I need to back up the data to pend drive
but i cant find the pendrive in the home section.
View 2 Replies
View Related
Sep 29, 2010
When I start my system up(ubuntu 10.04) it gets to "ubuntu" loading animation then displays "An error occurred while mounting 0, Press S to skip mounting or M for manual recovery". I've read many threads and tried different things but nothing seems to be working!
heres my blkid output:
/dev/sda1: UUID="e1606c6e-e959-492d-824e-c0a8f0cd619b" TYPE="ext4"
/dev/sda5: UUID="d5492173-5794-46af-aa21-87abe18d571a" TYPE="swap"
View 1 Replies
View Related
Jan 7, 2011
Havent got a clue why this started to happen recently, it says press S to skip or M to fix manually, i always skip adn everything is just fine, just would like to know why im getting this message and how to get rid of it
View 9 Replies
View Related
Apr 2, 2011
My linux mint while booting shows an error: An error occurred while mounting /media/6092-594B. There are two options : Press S to skip mounting or M for manual recovery. I have tried press S, but nothing happens.
Showing that code:
fsck from util-linux-ng 2.17.2
/dev/sda7: clean, 366872/2943360 files, 9301096/11765248 blocks
init: unreadahead-other main process (843) terminated with status 4
init: unreadahead-other main process (848 ) terminated with status 4
mount: /media//6092-594B not mounted already, or bad option
[Code].....
View 1 Replies
View Related
Oct 24, 2010
I have 2 hard drives on mu box 1st one is 500.0 MB ext4 Volume where I have my syste FC 13 and a 2nd one where I put my database files as follows 78.1 GB ext4 Volume usage = filesystem, format ext4
ih file browser, I can see an icon for a 80GB hard drive but whenever I double click I get the following
Quote:
Error mounting volume: An error occured while performing an operation on data Partition 1 of ATA Maxtor <: <the operation failed
clicking details
Quote:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
when I type
Quote:
dmesg | tail
I get
Quote:
# dmesg | tail
[drm] nouveau 0000:01:00.0: Allocating FIFO number 3
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 3
[drm] nouveau 0000:01:00.0: Allocating FIFO number 4
What is very strange is that mysql works fine.In disk utility, it indicates that disk is healthy, but when I click check file system i get
File system check on "data" (Partition 1 of ATA MAXTOR STM380215A) completed File system is NOT clean
View 14 Replies
View Related
Apr 28, 2011
I tried to install last Ubuntu distribution (11.04) in a laptop that fits setup requirements. I downloaded de Iso, burnt on cd and restart the laptop with the cd inside it.The hard disk does not have any partition, it's empty, I suppose installation gives that opcion.At the begining of the installation, before any interactivity, I get this error:
View 2 Replies
View Related
Oct 18, 2010
I was trying to mount my windows partition in Ubuntu so I could read it.
I said "Sudo Mount /dev/sdb1".
Then it said "Error: Blah blah blah Windows wasn't shut down properly."
So I went into Windows, and shut it down properly.
Then when I tried to boot into linux, it stops with a low-res ubuntu splash screen and a message that says:
An error occurred while mounting / Press S to skip mounting or M for manual recovery
So, I press M.
I say "mount /".
It does nothing.
I restart in recovery mode.
It stops at:
Or something.
View 9 Replies
View Related
May 8, 2010
I'm emulating Ubuntu using VMWare and I've upgraded it to Maverick version. When I boot the system I get this error (below the Ubuntu logo): "an error occurred while mounting /mnt/hgfs" I have to click S to continue and the the OS seems to work well.
View 6 Replies
View Related
May 28, 2009
I am having permissions errors every time I try to mount a windows host. I have a linux server and all the windows computers can see that computer and its files, but we wanted to start backing up the linux machine to one of our other computers. so I tried to mount one of the computers. here is the sequence of events:
Code:
$mount -t cifs //192.168.1.194/Admin$ /mnt/Anita-comp
password: (I have no password so I left it blank)
Mount error (13): Permission Denied
I tried all sorts of passwords we use around the office and none of them worked.
I then decided to try mounting one of our other computers. this one looked like it worked fine. no error messages at all. (I left password blank) so I look in my filesystem and the mounted drive is not in the /mnt/Anita-comp file. What gives?
View 11 Replies
View Related
Apr 13, 2011
I have got a Acer Aspire 9300 which came with one of Bill Gates unreliable operating systems and a recovery partition in case something goes wrong. I surely installed linux (now on opensuse 11.4) as quickly as possible. mounting this hidden recovery partition under linux? All I can see is this from "fdisk -l"printout:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x34fe34fd
[Code]....
I assume that the partition in question is between blocks 0 and 2047?
View 1 Replies
View Related
Jul 14, 2011
Just the last day or so, I've noticed a long pause when I boot my laptop, with lots of disk activity. dmesg says:
[Code]...
Why would there be a 15-second pause (during which the disk is slammed) between mounting root and mounting swap? During this time I see nothing but a blank purple screen, there are no cycling dots or text scroll. Is this normal and I'm just freaking out over nothing because there's no indicator of progress? GRUB default boot options: quiet splash nomodeset video=uvesafb:mode_option=1920x1200-24,mtrr=3,scroll=ywrap vt.handoff=7
View 9 Replies
View Related
Jun 26, 2011
actually some my windows ntfs partiitions are unable to mount at start up. the error msg is -'some of your partitions are unable to mount press 's' to skip or 'm' to manually mount.
View 14 Replies
View Related
Aug 28, 2009
I have a backup of /oracle in redhat linux advance server 2.1,i have taken that backup by tar -cvzf command when untar this backup by tar -xvzf command the following error occurred-"Error exist delayed from previous error"
View 2 Replies
View Related
Apr 20, 2011
I was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
View 1 Replies
View Related
Aug 7, 2010
when i inserted my pendrive, i got this message, and the nautilus opened for me 2 windows for my pendrive, simultaneously And, when i go to the /media, i got this.
View 2 Replies
View Related
Apr 29, 2010
I just ugraded from karmic, and it all went without a hitch. Except now when i boot i get... Error while mounting /etc/fstab press s to skip or m for manual recovery.
Pressing s works and i have a working machine, but i would like to fix this. Not tried the manual recovery yet as i have no idea about fstab and don't want to break it.
View 9 Replies
View Related
May 6, 2010
Installed new drive in notebook, connected old one with SATA/USB cable, both are encrypted disks. It detected the old drive and prompted for password in Gnome, after entering correct decrypt password, this error appeared:
Error unlocking device: cryptsetup exited with exit code 239: Device udisks-luks-uuid-4de9c864-c678-4633-4343-uid1000 already exists.
View 1 Replies
View Related
Aug 28, 2010
Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdc1 is already mounted on / mount failed. Not sure what happened but it worked fine till last reboot. It's a 250g NTFS drive named MEDIA device /dev/sda1. why it won't mount now.
View 4 Replies
View Related
Aug 29, 2010
When I try to start up 9.10 I can get past GRUB but not fsck. A file check will be started but no progress will be made and finally I get the 'General error mounting filesystems'.Trying in recovery mode I get this just before the fsck check
Quote:
fsck from util-linux-ng 2.16
[8.016378] ACPI: I/O resource piix4_smbs [0xb00-0xb07] conflicts with ACPI region SOR 1 [0x0b00-0xb0f]
/dev/sda1 goes fine
Quote:
/dev/sda3 has been mounted 34 times without being checked, check forced
mountall: canceled
[Code]...
This seems to be slightly different than the other threads I've seen discussing this issue. It just all of a sudden happened, I didn't upgrade anything or have any crashes immediately prior.
View 2 Replies
View Related
Jan 15, 2011
I had Ubuntu 10.04 installed entirely on my 750 gig SATA drive. Yesterday I backed up my /home and installed a 200 gig drive and reinstalled using the 200 gig drive as / and swap. The 750 gig drive was all /home. Now, whenever I reboot it comes up saying it had serious errors mounting /home and I have to reboot again to get it to boot up. I never had this issue when the 750 gig drive was running the entire show. Has anyone else run into this? S.M.A.R.T. hasn't been throwing any warnings or errors so I am at a loss as to what "serious" errors Ubuntu could be running into.
View 3 Replies
View Related
Feb 18, 2011
my Dad's computer was running quite slow here lately (Running Hardy Heron). I decided to go ahead and run all the software updates, and had it go ahead and update the OS as well. Well, the install went fine, but upon booting, it crashes to busy-box with the dreaded "ALERT! /dev/disk/by-uuid/########## not found error". I found that if I waited for a while, then cd'd to the by-uuid folder, this file eventually showed up. So I figured maybe if I 'exit' from there, it would boot up and find the file. Au Contrair, things get stranger! I end up with a purple screen telling "An Error Occured While Mounting /". Here's what it looks like: This is quite frustrating, I'd like to get it fixed and hopefully save the data he has on there! I remember having the by-uuid error once before after running an update I think, but can't remember how I fixed it! Feels like I just used the 'exit' trick a couple of boots and it was fine??
View 6 Replies
View Related
Jul 13, 2011
I have spent the summer and just got my few must-have Windows programs over to Ubuntu 11.04 (64-bit), got it customized with Docky (under Ubuntu Classic) and everything is SWEET. (But don't get me going on Unity dock). One problem: if I boot with my 1TB portable hard drive plugged in Ubuntu will recognize it. If I plug a portable drive in after the boot, I get this error below. I tried Mounting manually and with Archive Mount
View 1 Replies
View Related
Jul 19, 2011
When ever i try to mount my nfs share i got a msg mount: 192.168.10.1:/home failed, reason given by server: Permission denied
And my log file show the message Jul 19 04:33:25 localhost mountd[28294]: mount request from unknown host 192.168.10.1 for /mount_rhel/Server (/mount_rhel/Server)
My Exportfs file
/mount_rhel 192.168.10.0(rw,sync)
i try to reinstall nfs but the problem is still same. i also checked all the daemon is running in backgroup like portmap , mountd etc.
View 4 Replies
View Related
Jan 4, 2009
i want to mount ip address in linux i used following command bun an error apeares
Code:
#ifconfig eth0 192.168.0.31
#mount 192.168.0.31:/ /mnt
mount : 192.168.0.31:/ faild reason given by server. permision deneid
i had turn off iptable in network services ,
i using Fedora Core 6
View 2 Replies
View Related
Nov 22, 2010
I'm having the following error when I try to mount nfs: "nfs.mount internal error".
View 4 Replies
View Related