Ubuntu :: Manual Or Auto Partition?
May 1, 2011I'm downloading linux right now and was wondering what the difference between manual and automatic partition is. If manual partition is better can someone tell how to do it?
View 2 Replies
ADVERTISEMENT
Software :: Replace Auto-installed With A Manual Install
Apr 27, 2011I just use the package manager to do installs. But sometimes I need a more up to date version. I want to make sure that a manual install, either from source or a package, will replace the package-manager installation, and not install a second copy to a different location. I would also like to know how to preserve any preferences/settings when performing the replacement.
View 5 Replies View RelatedUbuntu Installation :: Lucid 10.04 Crashes At Manual Partition Stage?
Apr 30, 2010Installing Kubuntu 10.04 Lucid AMD64 from a live CD. During manual partition (allocating mount points to existing partitions), the installer crashes. It just vanishes and drops back to clear desktop of the live CD. The error check from the CD boot menu reports no errors. Running the installer from the CD boot menu (instead of running the live CD first) gives similar symptoms. At the same point in manual partitioning, the installer crashes to a black screen, then starts a live CD session of KDE.
This hardware installed the beta version of Kubuntu Lucid 10.04 AMD64 without error, and has run earlier versions of Kubuntu without this problem.
It looks like a bug to me, so posted on launchpad ...
https://bugs.launchpad.net/ubuntu/+s...er/+bug/572622
Ubuntu Installation :: Manual Partition Failed On D600 Latitude
Jan 25, 2011I have installed a dozen dual boot XP / Ubuntu boxes, however this one has me stumped. After the installation failed in the partitioning phase I tried manually partitioning which also failed. Then I went to using a Gparted LiveCD. I can resize the NTFS partition fine each time rebooting in XP and it is OK. However when I shrink the NTFS then try to add an ext4 (or ext3) right after the NTFS it acts like it is working, then when it says "complete" the disk disappears out of Gparted and it shows no devices. If I reboot into the LiveCD it shows a blank second partition, if I try to format it in ext4 I get the exact same results. If I go to Windows it will show an unknown healthy partition. If I grow the NTFS back to the full 60Gb it seems to work fine. It just won't create a second primary ext4 partition.
View 1 Replies View RelatedUbuntu Installation :: Installer Partition 10.10 - Hangs When Select Manual Partitioning
Oct 14, 2010I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
Ubuntu Installation :: Partition By Default - How Much Disk Space A Non Manual Dual Boot Uses
Apr 23, 2010how much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
Ubuntu / Apple :: Manual Installation On Already Created Partition To Create Dual Booting PowerMac?
Jul 15, 2010I have booted from the .iso cd I made on my Mac last night and was tempted to install it on a 6gb partition that I have on my main HDD but was a bit scared to go past the fourth (or so) step in manual installing where I pick that partition and *do what?* Is it going to install the OS on that partition and leave everything else alone to give me a dual booting PowerMac? It doesn't quite say. I am fearful of screwing up my little ol' machine. Can anyone direct me to something that gives a step by step in manual installation on an already created (HFC+) partition to create a dual booting PowerMac?
View 3 Replies View RelatedUbuntu :: Auto-partition Free Space
Nov 16, 2010I am trying to install Ubuntu on a computer that will do a dual boot (Windows XP and Ubuntu). My drive is 1.5TB. I have installed WinXP first creating 20GB partition for it. Rest of the drive remained as an unpartitioned space. Now, on top of that I am trying to install Ubuntu. I got as far as the screen that asks me to partition hard drive. What I would like to do is to create the following partitions:
/ - where the system will go (20GB)
/swap - well, swap (5GB)
/media - for my media files (rest of the HD ~1.4TB)
Unfortunately, I was unable to do so (or it is beyond my noob Linux skills). The only two partition types available were Primary and Logical. When I created two partitions:
/
/media
I got an error that warned me to go back and "rethink" my strategy (do not remember exact error). When I tried auto-partition free space, I got:
/
/swap
but / took the whole remaining 1.5TB of the drive. How do I create the three partitions that I would like to have?
Ubuntu :: GRUB On Dedicated Partition (auto Populate)?
Jul 25, 2010Im running VMware fusion on my mac book pro and i want to boot my physical ubuntu partition. After wasting hours trying to add the partitions directly into vmware grub complained that it couldn't find the correct partition.
I abandoned that avenue and created a 50MB vmware partition and installed GRUB2 on it so in the VMware i then attached the 50MB grub partition and the 250G physical drive. This all works fine however i cant seem to get GRUB2 to automatically populate the menu. On the GRUB2 partition i have /boot/grub/* and /etc/grub.d/ * and in the grub.cfg i have set GRUB_DISABLE_OS_PROBER=false
however when i run update-grub i get an error saying something like "mkconfig-grub cannot find / is dev mounted?" i can manually run /etc/grub.d/30_os-prober and it prints out a list of all my partitions which i can paste into grub.cfg however i dont want to have to manually do this for each kernel upgrade.Im doing all this via a 10.04 live CD.
Ubuntu :: Auto Mount NTFS (windows) Partition?
Nov 7, 2010I have a windows partition on my drive, and I want to access it without having to mount it first, etc. There are just two partitions, windows and Ubuntu. I am running Ubuntu 10.04.1 so I want to mount it on startup. I saw this article: [URL] but I don't know if what it describes will work as it's almost 2 years old. I'm not adverse to commands, in fact would probably prefer those.
View 9 Replies View RelatedUbuntu :: Auto-mount Luks Encrypted Partition At Boot?
May 27, 2010I'm having a problem auto-mounting a new luks partition. I have crypttab and fstab entries. I already have my primary encrypted partition (root) mounting at boot (from the install), but after creating this one manually, it does not open on boot. It auto-mounts when I run the following command manually after boot: sudo luksOpen /dev/disk/by-uuid/<uuid> mycrypt
/etc/crypttab entry:
personalcrypt /dev/disk/by-uuid/a1af5b7b-db58-4690-b586-b74407795e2c none luks
/etc/fstab entry:
[code]...
Ubuntu :: Auto Mount An Ext4 Partition On My Hard Drive?
Apr 7, 2011Easiest way to auto mount an ext4 partition on my hard drive?
View 3 Replies View RelatedFedora :: Auto Mount NTFS Partition 12?
Jan 6, 2010Currently I have a dual boot system it consists of Fedora 12 and Windows Vista, at this time when I am logged into fedora 12 I can select the windows vista partition in the f12 file manager, I am than prompted for the root password and after entering the password, the drive mounts as read/write with no problem. How can I automate this mounting process so once I login as a standard user the NTFS partition mounts without any input? I would like this to auto mount without prompting for a password or having to double click on the vista partition each time.
View 6 Replies View RelatedGeneral :: Auto-mount A Vfat Partition As User?
Nov 1, 2010I have a vfat partition under RedHat RHEL5 that I currently must mount manualy after each boot. I would like it to auto-mount but I cannot find a way to do this without it becoming ro except for root. My other partitions auto-mount just fine. I have tried the vfat as a separate partition and as a VLM logical drive (as it currently is).
The fstab statement:
"/dev/VolGroup00/LogVolDos /dos vfat noauto,users 0 0"
allows me to mount it as a user. The statement:
"/dev/VolGroup00/LogVolDos /dos vfat defaults 1 2"
is what I use for other VLM partitions, but for the vfat it seems to only allow root access. Manually mount this partition is OK, it's just that I have sometimes forgotten and then it is not included in backups. What do I need to do to make the vfat auto-mount as accessible for a user?
Hardware :: Taking Ownership Of A Auto Mounted Partition?
May 25, 2011I am trying to auto mount a partition in /Stuffz but I am not able to take the ownership of the drive. This is a snapshot of my /etc/fstab
Code:
#
# /etc/fstab
# Created by anaconda on Thu Mar 10 05:24:50 2011
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[code]....
General :: Auto-mounting An Ecryptfs Partition Which Is On A Usb Drive?
May 30, 2010I have an ecryptfs partition on a usb drive, system runs Debian squeezeWhat I'd like to have is that when I connect the drive it will be auto. mounted and I'lleither have to enter the passphrase or it will already be in the keyring (even better).It seems ecryptfs can auto-mount a directory but I want to auto-mount an entire encryptd partition. Is this possible?.Also, can I have another encrypted directory, say ~/Private, at the same time or can ecryptfs handle only one at a time?
View 3 Replies View RelatedGeneral :: Make GNOME Desktop Auto Recognize The NTFS Partition Of The USB Drive
Jan 27, 2010How to make my GNOME desktop auto recognize the NTFS partition of the USB drive.
On command line I can do the following perfectly:
Code:
which results
Code:
All files permission on the drive is 777. I can read, I can write, do whatever I want.
But in GNOME Desktop environment, when the USB drive is plugged-in, the partition is auto-mounted with other options:
Code:
All files permission on the drive is now 555. I can't write to it anymore. I saw a post earlier having similar mount result, but this one is USB drive though.
So how to configure GDE mount automatically with my intended mount options?
Ubuntu Security :: Ecryptfs Doesn't Auto-decrypt With Auto-login
Jan 6, 2011I recently installed 32bit maverick and wanted to make it login automatically. I tried enabling auto login from Admin > Login but that didnt work and I was still prompted for my password. Then I went to Users & Groups and changed the password option to Do Not ask for password at login now after I reboot, the user list is shown (only 1 user) and it doesnt ask for password after I click on my username.
However, then it gives a few errors (as i vaguely recall):
1. cannot load .ICE directory in my home directory
2. some error 256 about a gconf-sanity-2 file
3. nautilus cannot load my home directory etc
and then it gets stuck without loading anything (blank wallpaper). i ve tried navigating to my home directory using Alt F2, gksudo nautilus and my home dir contents are encrypted by the ecryptfs (there is a readme.txt file and a shortcut). i have tried to decrypt but it doesnt work... i ve also tried to start/stop gdm, and startx but nothing works. if i stop gdm, then the prompt doesnt recognize my password and keeps on rejecting the commands i enter... I think this has something to do with the home dir not being decrypted due to the dont ask for paswd option... how can i disable the dont ask for pwd without the gui (i can access my / by booting through an external usb).
Ubuntu :: Auto Run (auto Exec) A Script On Mounting A Device?
Mar 16, 2010I would like to exec a script whenever a user mount a device. The device could be an internal device (for example a partition on a second hard disk) or a removable one (for example a usb hard disk). The script must have sudo capabilities even if the user is not included in the admin group. Is it possible?
The specific question:
I would like to add acl option to a device whenever it is mounted.
I tried fstab but it's changing the behaviour of nautilus see:
[URL]... so I would like to create a script with the command
Code:
sudo mount -o remount,acl /media/data
and auto execute it any time data is mounted.
Debian :: Auto-mounted Truecrypt Partition (keyfile Based) - Can't Add A Keyfile To The Volume Using The GUI
Nov 18, 2010I have a Truecrypt-encrypted Windows [system] partition, that I want to be opened and mounted automatically (using a keyfile) when I log into Debian, since it is also encrypted and I don't want to type two passphrases. It think this could be done with LUKS. With TC I probably have to go with the CLI, but haven't figured it out yet. And I can't add a keyfile to the volume using the GUI. In order to mount the volume I have to tick the Mount partition using system encryption (preboot authentication) checkbox, or otherwise I get Incorrect password or no TrueCrypt volume found. And same when I try to add a keyfile.
View 2 Replies View RelatedGeneral :: Make Nano Support Auto-complete And Auto-bracket Closing?
Feb 20, 2010Does anyone know if there's a way to make nano support auto-complete and auto-bracket closing?
View 1 Replies View RelatedGeneral :: Html - Code Editor That Has Auto-indent AND Auto-outdent?
Apr 22, 2011I code primarily in jQuery/JavaScript, and I'm looking for a text editor for Linux that has auto-indent and auto-outdent (seems to be tough to find that). Any suggestions? I've checked Gedit, Cream, vim, Bluefish.None of them seem to have this feature.
View 2 Replies View RelatedNetworking :: Ethernet Auto-connect / Auto-sense Doesn't Work
Feb 3, 2011I have noticed that a common issue to several distros is the fact that the networking subsystem doesn't automatically detect the link if an ethernet connection is disconnected and then re-connected to the NIC after boot. If the ethernet cable is connected after the system is up and running, nothing happens - ethtool eth0 shows link detected: no, and you have to restart the network service to let the NIC know that there is in fact a link, and actually connect. I have a Fedora14 (KDE) box with a brand new Asus motherboard with embedded NIC. Everything works great except the auto-detect of a freshly connected ethernet connection if the link is down to begin with.
Am I missing a ethernet link sentinel utility or something, or is this just the way linux works? I have done plenty of research on plenty of posts, and it seems this is a common problem, with no solution other than manually or programatically restarting the network service in a script to detect the link after a disconnect.
Debian Configuration :: Auto-login And Auto-connect To Networks
Jun 3, 2010I press On-button, Debian boots, logs in and automatically connects to the Wireless network AND! to my local pc via LAN. It runs an ssh server, so I can ssh into debian over internet and communicate with the local pc (send a magic packet).Here are my problems:
1) I don't how to log in automatically. This and this doesn't work.
2) I need a network tool that can manage multiple connections and has a reconnect feature. With the default network manager I cannot even connect to more than one network simultaneously although I have two network devices of course.
And I guess I can run all that in console mode, right?
CentOS 5 :: Software RAID Auto Sensing Auto Rebuild Possible?
Jul 23, 2010I recently installed a server with Software RAID. I tested by powering it down, unplugging one drive and powering it up. Magically, it worked!I found out later that I have to manually add individual devices like md1 to sda2 md2 to sda4. I got all of them added and rebuilt but my question is: Is there a way to make it so that if I "removed" a drive and put it back, the system will senses the new drive and rebuilds based on some internal table?
View 1 Replies View RelatedUbuntu :: Cannot Set Manual Resolution?
Apr 30, 2010My Monitor is a Acer X223HQ which has a native max resolution of 1920 x 1080. I can easily achieve this is windows vista, but on ubuntu I am limited to 1360 x 768.I have tried manually adding the resolutions to xorg.conf which puts the Xserver in low graphics mode upon restart.this as I dont want resolution to ruin my experience.Running Ubuntu 10.04 LTS, graphics GPU is an intel G41 chipset.
View 7 Replies View RelatedUbuntu :: KVM Vs Manual Switch
Jun 6, 2010I have bought three different kvm switchs to connect a Win 7 and a Ubuntu 10.04 system (two different towers). After plugging in any of the KVM switchs the ubuntu system wont display correctly. It either blinks or is completely black.Because of this I researched this problem and decided to go with a manual switch. My question is if anyone has had experience with a manual switch and if adding an agp video card would hinder performance with a switch.
View 4 Replies View RelatedUbuntu :: VNC With SSH / Error In Manual?
Jan 11, 2011how to use create a ssh tunnel for vnc. I have fought with this explanation for some days, and hopeless trial and error finally worked. Here is the explanationEach time you want to connect to your PC, follow these steps:
Find your PC's public name or IP address. Unless your PC has been assigned a memorable name, the easiest way to do this is to go to whatismyip.com from your PC. You can assign your PC a name by getting one from a dynamic DNS provider.Start the SSH client on the computer you'll log in from.Tell the SSH client to use local port-forwarding to connect port 5,900 on your desktop to port 5,900 on localhost.Via the SSH client, run the command x11vnc -safer -localhost -nopw -once -display :0 on the computer whose desktop you will view.where someone suggests to create a local port forward. The person who asks in this thread, has apparently read the same manual as I. The suggestion works, but I am not entirely certain that I have created a secure connection by "locally" forwarding port 5900 on the phone to localhost:5900. Can someone confirm this?Am I correct in assuming that the line "Tell the SSH client to use local port-forwarding to connect port 5,900 on your desktop to port 5,900 on localhost." in the explanation should read "on your remote laptop"?
Ubuntu :: How To Do Manual Recovery
May 16, 2011Does anyone know how i can do a manual recovery?
View 4 Replies View RelatedUbuntu :: User Manual Available For Xubuntu?
Mar 25, 2011is there a user manual available for xubuntu 10.10 if there is i cannot find it anywhere, could someone point me in the right direction.
View 3 Replies View Related
