I've a
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
on my oldish Toshiba laptop. It works sort of, I'm using it now, however everything is very very slow indeed. Very jerky indeed. Scrolling down on firefox takes an age and selecting things is rather hard. How to get it working right?
I recently installed Ubuntu 9.04 through WUBI, but when the installation finished and I went to turn the computer on to Ubuntu, I could not get graphics working. It would appear that the resolution has been set super-high somehow, because a message will pop up saying that I don't have enough video memory to run at the resolution I'm trying. I have tried xfix in recovery modeI don't know if this has anything to do with it, but I'm using a very old monitor.
View 2 Replies View RelatedI have just recently installed Ubuntu 9.10 on an old M35X-S149 Toshiba laptop which uses the 855gme graphics set. I am very happy with it so far and after a bit of forum searching was even able to get it to connect to my wifi. However, I am now trying to hook it to my TV using an S-video cable which worked ok when it was windows and I cant seem to get it to work. I have searched forums quite a bit and almost all resolutions seem to revolve around xorg.conf which i cannot find where it is supposed to be located. I did some more searching and found some commands to run to get one created in 9.10 and it didnt seem to create the file.
I am an extreme novice when it comes to linux related stuff, but am usually pretty good at following directions, so I was a bit disappointed that I could not get it to workOh and also, if anyone knows - is there a good replacement for autohotkey for ubuntu?I am basically writing macros to search for an image on screen and then click a button. Its not a huge deal as i still have a windows machine i can do that on, but it would be nice to have
I recently uninstalled some unnecessary libs thinking that I could work around without them. It turned out I couldn't. So I installed every single one, and it seemed like everything was working fine. But then I tried to boot, and was thrown into a low-graphics. Well I tried to boot in a low-graphics environment temporarily but it turned out X just restarted. Then I tried to reconfigure the settings, but choosing any option it threw me back into the last menu without any action being taken.
So I googled up some lines it was vomiting at me and it indeed might be my xorg not configured properly. but every time I try to reconfigure it and I look into the .conf file it turns out it is completely blank. maybe I should also note I am sporting a 64 bit bubuntu, not an NVidia though, Intel Series 4 express chipset family thing. I think it is a GMA4500MHD but not sure, what shall I do so that I don't have to reinstall my beautiful pimped out system?
After upgrading (from 10.10), i get a line command prompting for login. I cannot get past this line/prompt. How do I bypass this prompt? So that I can access a prior version, if possible.
View 5 Replies View Relatedso when ever i log on to my new install of ubuntu, i get a white background.when i open the choose desktop background, This happens: does anyone knows whats going on?
View 1 Replies View RelatedI activated my graphics card on Linux Mint which is Nvidia GEFORCE GT 130M. Now when I boot up, after bios the loading screen looks like in the picture (sorry its crappy quality). When it gets to the login screen and afterwards it is just blank, but i can tell its running underneath because i can shut down by doing ctrl alt backspace and then tab and enter. I tried entering recovery mode but it was the same. Atm im using a live cd.
View 2 Replies View RelatedJust spent about 4 hours upgrading from 9.10 to 10.04 thinking it would fix my graphics problems. Basically I have no 3d acceleration of any kind, is there any way i can load the intel drivers? Because what I'm using now is really crappy.
[code]...
Can i just change something in my xorg to intel and it will load that driver ? I've tried the "hardware drivers" thing but it does not show anything.
I'm having a problem here with my graphics card. Until not very long ago I was using the controller Ubuntu downloaded for me. However I recently downloaded another one from the ATI page, called ati-driver-installer-11-3-x86.x86_64.run and installed it.
So far, I've encountered two new problems:
1. The ATI Catalyst Control Center would not open after I setup the Tear Free Desktop.
2. The computer is running slow. Files take longer to open, minimizing and maximizing windows takes longer. Wi-fi connection takes longer to connect, etcetera. Overall, everything is going slow.
Are these problems related? I would like to uninstall the driver as the computer was working just fine before. In addition to this, I have firefox 4.0 and the colors on most of the images are darker than they should. The images look fine on other browsers except firefox. I read I had to do type "about:config" in the address bar, find "gfx.color_management.mode" and change the value from 2 to 0. What did I exactly do there? I took the advice from this thread: [URL]
Recently i installed Maverick on my studio 15 laptop
It frequently hangs.Nothing works and i have to restart manually Is there any other way to restart Why is it hanging frequently?
Also i installed ati radeon drivers using additional drver bundled with Maverick.
After installing it shows d driver to be workinng fine
But while opening Ati catalyst control centre it says d driver isnot installed
how to solve it
Just fitted an Inno3D (I-7300LE-G4E3) graphics card and I get a distorted boot up screen, a virtually unreadble boot menu (lots of extra white bits all over the screen) and when the system is booting the black screen with "booting from .." and the underscore at the end, is covered with white commas (?!), then the login screen pops up for a fraction of a second, then get a blank screen and no signal-cant get anything after this (or from the vga port on the pc)-I ve tried logging in even though I cant see anything, but no music , nothing.
Thought I might have to download drievers AFTER I d installed it, but as I had this problem, I removed it and tried to download driers before installation. Not sure which of the 4 to try, but tried 2 and neither works-GDebi is offered as an app to open them but nothing happens, nothing happens if I just click on them and when I try and install them from a terminal with the script from the nVidia site, it says unable to open them.
Well I want install Picasa on ubuntu. I downloaded the deb file and installed it and picasa is also showing in application-graphics, but when i click it nothing happens. And when I right click any image there is no option for open with picasa. And also in ubuntu software center when I searched for picasa in installed program to remove it I found nothing. I cant figure it out how to do this. So as you can see picasa is showing as it is installed but nothing happens.
View 3 Replies View RelatedI am unable to get the hdmi audio for from my graphics card to work. I do not have any speakers to test the other two, and redundant, sound cards .My graphics card is the Nvidia gtx 285, I auto installed the drivers via ubuntu. It does not show up in the hardware tab of "sound preferences". It's not muted, I can't find anything relating to sound in nvidia-settings.but here is my aplay -l:Quote:
card 0: XFi [Creative X-Fi], device 0: ctxfi [Front/WaveIn]
Subdevices: 8/8
Subdevice #0: subdevice #0
[code]...
I am trying to get the graphics working correctly on an old HP Compac d220 mt machine that has an Intel 82845G Graphics Controller.
[Code]...
The latest driver I can find is: Intel(R) Graphics Driver - Linux*[IntelGraphics_060704.tar.gz] dated 12/17/2004 Version 20041217 When I started to install this driver I got a message that said that it was compatible with kernel version 2.4.(+ numbers I don't remember) So I stopped the installation. My question is what will / could happen if I go ahead and try to complete the driver install? Will I hose the entire system? I am fiddling with the kernel if I continue to install the driver.
IF it does break, would it be possible to undo the driver install using the text based root console with networking via the recovery option or will that too be inoperable if I hose the system. Should it break and I can get to the recovery option and open a terminal. How would i uninstall it? I am just getting reacquainted with Linux again after 20 years. I am not using the advanced package management tool to install the driver. The driver has it's own installation script. (have not looked to see if it has an uninstall script in the file list) I won't be able apt-get remove or dpkg purge anything.
I have a z9 volari Graphics card that opensuse 1.2 is recognising but the xgi driver is not present. I get the following when I startx:
auth: creating new authority file /root/.serverauth.4650
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code]....
Perhaps my last post about this was too long and hence why nobody responded. So i will try and keep it simple and let the experts advise me.
I have tried installing an rpm that I got from rpm search. Namely xorg-x11-driver-video-xgi-1.5.0-6.1.i586 which seemed to install but when I did a query it said it was not installed, but when I tried to do an install again it said it was already installed ??
There is also a file called xserver-xorg-video-sis_0.9.3.orig.tar.gz which i got from this site. I have not managed to extract it properly yet but will look into that myself. It appears to have in it a makefile, so I presume it is source files and I could really do with some help in that.
I am using OO 3.1 on Karmic 9.10. When working with Open Office Writer and either graphics or charts, a couple of things happen. First of all, the page position moves around. For example, if I click on a graphic I have inserted or on a chart, the page on my screen may shift up or down by a half inch or so. If I click back out in a text area, the page moves back to where it was. This is very annoying. Has anyone else had a problem like this? I have tried turning off compiz completely but it doesn't fix it
View 1 Replies View RelatedI upgraded from wheezy to jessie, but now I just boot to a console. I've gone through and made sure all packages are up to their latest versions, and I've made sure gnome, xorg, and xserver-xorg are reinstalled (during the upgrade they got uninstalled..).
Here's what happens when I run startx manually:
Code: Select allcharlie@asimov:~$ startx
X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[Code] ...
Note also that this whole time, gdm3 has been running:
Code: Select allcharlie@asimov:~$ ps ax | grep gdm3
1058 ? Sl 0:00 /usr/sbin/gdm3
3993 tty2 S+ 0:00 grep gdm3
charlie@asimov:~$ sudo service gdm3 status
[Code] .....
I'm not sure why it prints that it's starting gdm3, but it does that every time I run `sudo service gdm3 status'.
Here's a copy of my /var/log/Xorg.0.log.
My graphics card (00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03))
used to work fine, but yesterday I opened glest and it crashed my computer within 5 seconds. No picture was ever displayed. I downloaded another 3D game called Nogravity (Glest being my only one, I wanted something else to test) and it crashed after a few minutes of play and I had to restart. After all the crashes kerneloops came up with a report.
Here is the most recent one:
Code:
I did recently notice that I have no direct 3D rendering, it comes up with something like: No (LIBGL_ALWAYS_INDIRECT SET)
I do not know whether I used to have it, but I do know that 3D apps used to run perfectly well. (In fact the stability of 3D apps was what converted me from Ubuntu where they crashed every 5 minutes)
I ran glxgears for 5 seconds and it gave me 420 FPS.
i am using fedora 12 should i update my kernel but when i update my kernel it leads to crash of packages and graphical does not works.
View 2 Replies View RelatedAfter a fresh install of F12 on pc with Riva TNT2 Model 64 graphics card, Login hangs once booted.
Worked fine on f11.
I am big fan of SUSE.. waited like anything for 11.4 release .. but i am in trouble now .. installed 11.4 on Acer 4820TG (switchabe graphics with ATI mobility radeon 5650).. after booting it fails with the attached error while works fine in failsafe mode. Let me know if u need any of the details i am available online for some 5 hours.
View 9 Replies View RelatedI have a problem with a new GeForce 8600GT graphics card. I just installed the card into my Dell Optiplex 745. When I boot the PC I have no image until the Ubuntu logon box comes up. No bios info, no boot menu, no grub menu, nothing until the Ubuntu login. Once I get to the logon prompt everything seems fine except when I use CTRL+ALT+F1 to get to a console. Then I get nothing but a blank screen. When I press CTRL+ALT+F7 my desktop loads fine and all is OK again. I had a problem trying to get the nVidia drivers installed because I didn't have a usable console. I had to use SSH to install the drivers. I'm using this card with an HP 1755 flat panel that's about 5 years old and a Dell Optiplex 745 with Intel Dual-Core CPU.
View 8 Replies View RelatedI'm using RedHat 9. I've already installed java and azureus/vuze too but when i run azureus there is a problem.
View 1 Replies View RelatedI have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies View RelatedI have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
I have a Packard Bell Imedia desktop with on-board ATI graphics. I also have a spare Nvidia PCI card. Is there a way I could use the Nvidia to run a second screen, if so how as the Nvidia and fglrx drivers seem to collide in a show stopping way!!I am running Kubuntu Intrepid, but have resorted to Gnome as KDE4 went spectacularly wrong on me.
View 5 Replies View RelatedI've updated my thinkpad T41 from Jaunty to Karmic and the notify OSD graphics are broken.
See the screenshot here:
http://varlogrant.blogspot.com/2009/...ntu-koala.html
(this isn't my blog, just someone with the same issue as me!!). All OSD alerts look like this.
I don't use the desktop effects on the laptop. Anyone got any ideas how to sort it?
i booted up 8.04 and the display is huge. i tried ctrl alt backspace hoping it would come back normal, but after three times i gave up on that. i can't find anything in System to fix this. i can barely use it this way.
View 2 Replies View RelatedI recently upgraded to Lucid and am having difficulty finding and installing the ATI graphics driver for my machine. When I open Administration > Hardware Drivers, the list is completely empty. I've searched the forums but haven't found a way to get the driver installed. My graphics card is an ATI Radeon X1200 series, and my computer is a Toshiba Satellite A215-S5818.
View 6 Replies View Related