Ubuntu Multimedia :: 855gme Graphics 9.10 Tv Not Working?
Jan 20, 2010
I have just recently installed Ubuntu 9.10 on an old M35X-S149 Toshiba laptop which uses the 855gme graphics set. I am very happy with it so far and after a bit of forum searching was even able to get it to connect to my wifi. However, I am now trying to hook it to my TV using an S-video cable which worked ok when it was windows and I cant seem to get it to work. I have searched forums quite a bit and almost all resolutions seem to revolve around xorg.conf which i cannot find where it is supposed to be located. I did some more searching and found some commands to run to get one created in 9.10 and it didnt seem to create the file.
I am an extreme novice when it comes to linux related stuff, but am usually pretty good at following directions, so I was a bit disappointed that I could not get it to workOh and also, if anyone knows - is there a good replacement for autohotkey for ubuntu?I am basically writing macros to search for an image on screen and then click a button. Its not a huge deal as i still have a windows machine i can do that on, but it would be nice to have
Just spent about 4 hours upgrading from 9.10 to 10.04 thinking it would fix my graphics problems. Basically I have no 3d acceleration of any kind, is there any way i can load the intel drivers? Because what I'm using now is really crappy.
[code]...
Can i just change something in my xorg to intel and it will load that driver ? I've tried the "hardware drivers" thing but it does not show anything.
Just fitted an Inno3D (I-7300LE-G4E3) graphics card and I get a distorted boot up screen, a virtually unreadble boot menu (lots of extra white bits all over the screen) and when the system is booting the black screen with "booting from .." and the underscore at the end, is covered with white commas (?!), then the login screen pops up for a fraction of a second, then get a blank screen and no signal-cant get anything after this (or from the vga port on the pc)-I ve tried logging in even though I cant see anything, but no music , nothing.
Thought I might have to download drievers AFTER I d installed it, but as I had this problem, I removed it and tried to download driers before installation. Not sure which of the 4 to try, but tried 2 and neither works-GDebi is offered as an app to open them but nothing happens, nothing happens if I just click on them and when I try and install them from a terminal with the script from the nVidia site, it says unable to open them.
I am unable to get the hdmi audio for from my graphics card to work. I do not have any speakers to test the other two, and redundant, sound cards .My graphics card is the Nvidia gtx 285, I auto installed the drivers via ubuntu. It does not show up in the hardware tab of "sound preferences". It's not muted, I can't find anything relating to sound in nvidia-settings.but here is my aplay -l:Quote:
I upgraded from wheezy to jessie, but now I just boot to a console. I've gone through and made sure all packages are up to their latest versions, and I've made sure gnome, xorg, and xserver-xorg are reinstalled (during the upgrade they got uninstalled..).
Here's what happens when I run startx manually:
Code: Select allcharlie@asimov:~$ startx X.Org X Server 1.16.4 Release Date: 2014-12-20 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[Code] ...
Note also that this whole time, gdm3 has been running:
I've a 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] on my oldish Toshiba laptop. It works sort of, I'm using it now, however everything is very very slow indeed. Very jerky indeed. Scrolling down on firefox takes an age and selecting things is rather hard. How to get it working right?
I recently installed Ubuntu 9.04 through WUBI, but when the installation finished and I went to turn the computer on to Ubuntu, I could not get graphics working. It would appear that the resolution has been set super-high somehow, because a message will pop up saying that I don't have enough video memory to run at the resolution I'm trying. I have tried xfix in recovery modeI don't know if this has anything to do with it, but I'm using a very old monitor.
I recently uninstalled some unnecessary libs thinking that I could work around without them. It turned out I couldn't. So I installed every single one, and it seemed like everything was working fine. But then I tried to boot, and was thrown into a low-graphics. Well I tried to boot in a low-graphics environment temporarily but it turned out X just restarted. Then I tried to reconfigure the settings, but choosing any option it threw me back into the last menu without any action being taken.
So I googled up some lines it was vomiting at me and it indeed might be my xorg not configured properly. but every time I try to reconfigure it and I look into the .conf file it turns out it is completely blank. maybe I should also note I am sporting a 64 bit bubuntu, not an NVidia though, Intel Series 4 express chipset family thing. I think it is a GMA4500MHD but not sure, what shall I do so that I don't have to reinstall my beautiful pimped out system?
After upgrading (from 10.10), i get a line command prompting for login. I cannot get past this line/prompt. How do I bypass this prompt? So that I can access a prior version, if possible.
so when ever i log on to my new install of ubuntu, i get a white background.when i open the choose desktop background, This happens: does anyone knows whats going on?
I activated my graphics card on Linux Mint which is Nvidia GEFORCE GT 130M. Now when I boot up, after bios the loading screen looks like in the picture (sorry its crappy quality). When it gets to the login screen and afterwards it is just blank, but i can tell its running underneath because i can shut down by doing ctrl alt backspace and then tab and enter. I tried entering recovery mode but it was the same. Atm im using a live cd.
I'm having a problem here with my graphics card. Until not very long ago I was using the controller Ubuntu downloaded for me. However I recently downloaded another one from the ATI page, called ati-driver-installer-11-3-x86.x86_64.run and installed it. So far, I've encountered two new problems:
1. The ATI Catalyst Control Center would not open after I setup the Tear Free Desktop.
2. The computer is running slow. Files take longer to open, minimizing and maximizing windows takes longer. Wi-fi connection takes longer to connect, etcetera. Overall, everything is going slow.
Are these problems related? I would like to uninstall the driver as the computer was working just fine before. In addition to this, I have firefox 4.0 and the colors on most of the images are darker than they should. The images look fine on other browsers except firefox. I read I had to do type "about:config" in the address bar, find "gfx.color_management.mode" and change the value from 2 to 0. What did I exactly do there? I took the advice from this thread: [URL]
Well I want install Picasa on ubuntu. I downloaded the deb file and installed it and picasa is also showing in application-graphics, but when i click it nothing happens. And when I right click any image there is no option for open with picasa. And also in ubuntu software center when I searched for picasa in installed program to remove it I found nothing. I cant figure it out how to do this. So as you can see picasa is showing as it is installed but nothing happens.
I am trying to get the graphics working correctly on an old HP Compac d220 mt machine that has an Intel 82845G Graphics Controller.
[Code]...
The latest driver I can find is: Intel(R) Graphics Driver - Linux*[IntelGraphics_060704.tar.gz] dated 12/17/2004 Version 20041217 When I started to install this driver I got a message that said that it was compatible with kernel version 2.4.(+ numbers I don't remember) So I stopped the installation. My question is what will / could happen if I go ahead and try to complete the driver install? Will I hose the entire system? I am fiddling with the kernel if I continue to install the driver.
IF it does break, would it be possible to undo the driver install using the text based root console with networking via the recovery option or will that too be inoperable if I hose the system. Should it break and I can get to the recovery option and open a terminal. How would i uninstall it? I am just getting reacquainted with Linux again after 20 years. I am not using the advanced package management tool to install the driver. The driver has it's own installation script. (have not looked to see if it has an uninstall script in the file list) I won't be able apt-get remove or dpkg purge anything.
I have a z9 volari Graphics card that opensuse 1.2 is recognising but the xgi driver is not present. I get the following when I startx:
auth: creating new authority file /root/.serverauth.4650
X.Org X Server 1.6.5 Release Date: 2009-10-11 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX
[Code]....
Perhaps my last post about this was too long and hence why nobody responded. So i will try and keep it simple and let the experts advise me.
I have tried installing an rpm that I got from rpm search. Namely xorg-x11-driver-video-xgi-1.5.0-6.1.i586 which seemed to install but when I did a query it said it was not installed, but when I tried to do an install again it said it was already installed ??
There is also a file called xserver-xorg-video-sis_0.9.3.orig.tar.gz which i got from this site. I have not managed to extract it properly yet but will look into that myself. It appears to have in it a makefile, so I presume it is source files and I could really do with some help in that.
I am using OO 3.1 on Karmic 9.10. When working with Open Office Writer and either graphics or charts, a couple of things happen. First of all, the page position moves around. For example, if I click on a graphic I have inserted or on a chart, the page on my screen may shift up or down by a half inch or so. If I click back out in a text area, the page moves back to where it was. This is very annoying. Has anyone else had a problem like this? I have tried turning off compiz completely but it doesn't fix it
My graphics card (00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03))
used to work fine, but yesterday I opened glest and it crashed my computer within 5 seconds. No picture was ever displayed. I downloaded another 3D game called Nogravity (Glest being my only one, I wanted something else to test) and it crashed after a few minutes of play and I had to restart. After all the crashes kerneloops came up with a report.
Here is the most recent one:
Code:
I did recently notice that I have no direct 3D rendering, it comes up with something like: No (LIBGL_ALWAYS_INDIRECT SET)
I do not know whether I used to have it, but I do know that 3D apps used to run perfectly well. (In fact the stability of 3D apps was what converted me from Ubuntu where they crashed every 5 minutes)
I ran glxgears for 5 seconds and it gave me 420 FPS.
I have recently started using openshot to edit video and have found it very good. Previously I have been using Kino and openshot certainly seems more intuitive. Trouble is the more ambitious my productions the more juddery and prone to crashing the program becomes So I am thinking of an upgrade. At the moment I am using on board graphics. Or would more ram be the first thing to go for.
trying to get Ubuntu to work properly on a Del Dimension 2400. It has on board Intel Extreme graphics card. [URL] It installs and but runs slowly when the ubuntu GUI is up and running. The CPU is maxed out for quite small tasks. Selecting additional drivers gives nothing, so I guess it isn't running the graphics card in hardware acceleration - which is slowing down the system. I want to buy a graphics card to use on this Dell PC. It uses PCI expansion cards. I'm thinking of ebaying a second hand graphics card.
I am big fan of SUSE.. waited like anything for 11.4 release .. but i am in trouble now .. installed 11.4 on Acer 4820TG (switchabe graphics with ATI mobility radeon 5650).. after booting it fails with the attached error while works fine in failsafe mode. Let me know if u need any of the details i am available online for some 5 hours.
I have a problem with a new GeForce 8600GT graphics card. I just installed the card into my Dell Optiplex 745. When I boot the PC I have no image until the Ubuntu logon box comes up. No bios info, no boot menu, no grub menu, nothing until the Ubuntu login. Once I get to the logon prompt everything seems fine except when I use CTRL+ALT+F1 to get to a console. Then I get nothing but a blank screen. When I press CTRL+ALT+F7 my desktop loads fine and all is OK again. I had a problem trying to get the nVidia drivers installed because I didn't have a usable console. I had to use SSH to install the drivers. I'm using this card with an HP 1755 flat panel that's about 5 years old and a Dell Optiplex 745 with Intel Dual-Core CPU.
I downloaded my Proprietary ATI Linux Driver (for my Radeon Xpress 200) from [URL]... But I cannot figure out how to install it!I followed the instructions here but Terminal told me "command not found". I also tried double-clicking the file but it opened with gedit and gave me an error.
I've been browsing through the forums and tried several things, but I haven't found a solution to my problem yet. I have an Acer Aspire 5520 laptop, with an NVIDIA GeForce 7000 M graphics card. For a year I've been using Ubuntu, and with all the versions I've had, through Gutsy to Lynx, I've always found that 3D graphics are extremely choppy. I wouldn't say they are slow...it's more like they move for a couple of seconds, then stop, then move again, then stop. I didn't really care, because I hardly play games: I had initially noticed it trying to get Warcraft 3 to work on Wine, which obviously is an old game, and it runs perfectly on windows...I thought it was just a problem of Wine. But now I've installed Celestia and Flightgear, and with both of them I have this same problem. Flightgear is the worst, it's basically unusable.
I have done several things based upon what I read in the forums. I removed all the NVIDIA drivers, and manually installed the latest propietary driver 195.36.24. I turned off all my desktop effects. I turned on Sync to Vblank to see what would happen. The desktop itself runs very quickly, even the Desktop cube effect, if I turn it on. Like I said before, the problem seems to be this jerkiness with games, with Celestia, and with flightgear. If I get this working, then I'll actually have Ubuntu working completely perfectly, for the FIRST TIME!
This started yesterday.I have been running Lucid since the Beta release with no problems. Yesterday, I found about 20 or so updates ready for 10.04. I looked them over, mostly lib files, so I decided to go ahead and let them update. That evening I rebooted my machine before I left for the night, and it came up with the error "Ubuntu is running in Low Graphics Mode". In a word X is totally hosed. The display is cut just left of center, with part of the windows on the right carrying off the screen to come back onto the screen to the left.
I thought maybe Xconf might have been messed up, but not sure how. The updates I applied did not do anything to Xorg; and my understanding was that I didn't need that file because I am running with an Nvidia card. I tried to "reconfigure" the X settings from the error message, that did not work. I logged into a text only terminal, and copied a good backup of Xorg.conf back into place and rebooted. Same thing, still running in Low Graphics mode.
I have a desktop computer with integrated ATI graphics. Specs below and lspci log attached. I was running 9.04 Jaunty Jackalope until 1 week ago. Everything worked fine from the day I installed it. It's default driver worked fine and graphics requiring applications like Google Earth and Secret Maryo Chronicles (game) ran smoothly. Then about a week or so ago I did a clean install of Lucid on this PC. And now Secret Maryo Chronicles runs choppy and Google Earth doesn't run and display images smoothly. I could understand having problems like this if I were switching to Fedora or something but I'm still using the same distro (and both are recent versions).
Computer Specs: ATI Radeon Xpress 200 integrated graphics with 256 MB RAM Intel Pentium 4 clocked at 3.00 Ghz 2 GB RAM (.25 being used for graphics card) 500 GB Hard drive (355 for Ubuntu) 2 DVD drives
All 3d applications run with a solid black screen, and compiz will try to revert to the fallback wm, even though I have the new nouveau/gallium setup in 10.10.
glxgears appears to *think* it has a working screen, but it stays blank:
Code: Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate. 3570 frames in 5.0 seconds = 713.841 FPS 3298 frames in 5.0 seconds = 659.541 FPS
