Ubuntu :: How Do I Get Samba Config File Back

Feb 19, 2011

I removed then deleted the samba folder. Now when I reinstall samba there is no config file. How do I get this back?

View 4 Replies


ADVERTISEMENT

Fedora Servers :: Samba Can't Read The Config File?

Nov 24, 2009

I have a computer running Fedora 11. I wanted to use samba in my office. So I configured the /etc/samba/smb.conf ,but it did not work well : Windows can find samba,but when I tap in username and password,samba request them again , and the same thing continues in a loop. So I copied another computer's smb.conf (which is also a Fedora 11,samba runs well in this one).I copied this file to /etc/samba/ ,then samba can't satart up . I read from /var/log/samba/log.smbd.log : Unable to open configuration file "/etc/samba/smb.conf": Permission denied Even if I use: chmod 777 /etc/samba/smb.conf

why I can't login samba from Windows:

[global]
workgroup = MYGROUP
server string = Samba Server Version %v
; netbios name = MYSERVER
; interfaces = lo eth0 192.168.1.99/24

[Code]....

View 3 Replies View Related

General :: Using A Config Directory Instead Of A Config File?

May 7, 2011

I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device

config
<?xml version="1.0" encoding="utf-8" ?>
- <config>

[code]...

View 1 Replies View Related

General :: Back Out Of The Daemons Config Screen?

Feb 15, 2011

how to back out of the Network/Daemons configuration screen, so I can return to the install menu.I just tried the CTRL-O -> <CR> CTRL-X, it did not work.

View 2 Replies View Related

Ubuntu :: Ati Drivers Black Screen - Back To Vesa But No Xorg Config?

Dec 4, 2010

Was trying to play some new games, so was trying to install the ati drivers for my x15xx or something card.

anyway i am using ubuntu 10.10, so was having to try force them, using 9.10 config or something.

anyway got it installed, restarted and I get black screen have been trying to go back to "vesa" drivers or something. but been having no luck

I do not have a "/etc/X11/xorg.conf". and I cannot seam to make 1 using stuff like aticonifig --initial --input=/etc/X11/xorg.cong or anything like that

I am really stuck, even using dpkg-reconfigure or something didnt make the X11 conf

View 7 Replies View Related

Ubuntu Servers :: Config Samba To A Second Hard Drive?

Apr 2, 2010

I switch to linux 9.10 and I got webmin installed, I was hoping to set up samba so it would share my second hard drive over the network. Is there anyway I could share the second drive?

Here is my fdisk info.

Code:
Disk /dev/sda: 40.0 GB, 40037760000 bytes
255 heads, 63 sectors/track, 4867 cylinders
code....

Edit, Can you find out the ip of the server via commands not like this ip 192.168.XXX.X

View 4 Replies View Related

Fedora Networking :: How To Config Samba On 10

Feb 23, 2009

i want to configure samba on fedora 10. here are my settings in smb.conf

[global]
workgroup = MARVELSERVICES
server string = Samba Server Version %v
interfaces = eth0

[Code].....

View 14 Replies View Related

Debian :: GUI App - Installing System Config Samba

May 7, 2013

I use this GUI app a lot when I was using Ubuntu. Very simple to use. I want to use it in my new Debian 7 xfce install. My understanding is that I would have to build a deb from source to allow me to use this app? If this is the case, what is the best (easiest) way to do this. I saw some videos in YouTube but I'm not sure if things have changed with the new Debian 7. I have never used Debian before so if possible, go easy on me...

View 3 Replies View Related

Fedora Servers :: Config - Can't Seem To Get Samba Working

Mar 8, 2009

I've read through these pages [URL] but can't seem to get Samba server working. I am using Gnome and I go to System - Administration - Services

In there I can see smb and nmb. Both are enabled, but both have a status of unknown. I can't seem to start or stop either of them. I can just enable or disable them. I've tried using the gui, as well as command line.

I'd really like to get this going as I'd like to copy files from my XP Pro box to my Linux box (F9). I have WinSCP, but am having permission issues and I can only copy to a folder on my desktop on the Linux box (I'd like to get this fixed too, but that's a different thread at a later time)

View 10 Replies View Related

OpenSUSE Network :: Can't Authenticate VNC After Samba Config

Apr 1, 2011

First, like a dummy I did not backup the Samba config file before making changes. Using openSUSE as ftp and http server, was following tutorial to share between openSUSE and windows. I was using VNC to access machine to edit Samba config file, after altering the the file VNC authenication fails. I can still authenicate locally and through the ftp.

View 1 Replies View Related

General :: Config SWAT For Samba On Fedora 14?

Mar 23, 2011

Ive followed this:

[URL]

SWAT service is running
Firewall is disabled
disable is saved in this file.

Doesnt work. http://localhost:901

What to do to diagnose this? What to check?

View 1 Replies View Related

Debian Configuration :: System-config-printer No Samba ?

Mar 29, 2011

I installed the Gnome desktop CD1 AMD 64 version of Debian Squeeze. I installed samba and python-smbc. I am missing samba printers in my system-config-printer. Anyone know why? [url]

View 2 Replies View Related

Fedora Servers :: Setting Up Open Samba Config

May 29, 2011

I've got a situation where I would normally use NFS, but cannot. So in it's place I need to use a samba share (even though it's linux -> linux). I need it completely open and world writeable as if I had done an rw in an NFS export. I thought I had it as when logged in as a user I can edit delete etc. however the apache user seems to be struggling with creating files.

Here's my smb.conf as it stands.
Code:
[global]
workgroup = WGRP
server string = Samba Server Version %v
security = user
passdb backend = tdbsam
unix extensions = no

[tmp]
comment = Temp Directory
path = /var/tmp
public = yes
guest ok = yes
writeable = yes
browseable = yes

[sites]
comment = Sites Directory
path = /var/www/sites
public = yes
guest ok = no
write list = siteusr
writeable = yes
create mask = 0777
browseable = no
security mask = 0777
directory security mask = 0777
note that the drive is mapped as user siteusr

What I can do to open it up more?

View 5 Replies View Related

Networking :: Joining Windows Workgroup And Samba Config?

Apr 13, 2010

My interest to be able to join my windows workgroup and be able to work with the windows shares . I am running Fedora 12 in a virtual machine as guest OS. I know I have to install Samba which does not come installed in Fedora 12. Do I need to configure samba after installation if my only interest is to work on windows shares from Fedora and not the other way around? .

View 7 Replies View Related

Server :: Login / Passwords - Samba Config Files?

Jun 11, 2010

How to make a Server of LOGIN / PASSWORDS for flexible linux machines? Samba config files for the server and the client. The clients, if no network, shall use the /etc/shadow.

View 10 Replies View Related

CentOS 5 :: System-config-samba Doesn't Work?

Feb 24, 2010

system-config-samba doean't work from terminal neither it is shown in graphical mode, i cannot see system > administration > servers. Server is missing.

View 1 Replies View Related

CentOS 5 Server :: Setting Up Relaxed Samba Config

May 29, 2011

I've got a situation where I would normally use NFS, but cannot. So in it's place I need to use a samba share (even though it's linux -> linux). I need it completely open and world writeable as if I had done an rw in an NFS export. I thought I had it as when logged in as a user I can edit delete etc. however the apache user seems to be struggling with creating files. Here's my smb.conf as it stands.

[global]
workgroup = WGRP
server string = Samba Server Version %v
security = user
passdb backend = tdbsam
unix extensions = no

[tmp]
comment = Temp Directory
path = /var/tmp
public = yes
guest ok = yes
writeable = yes
browseable = yes

[sites]
comment = Sites Directory
path = /var/www/sites
public = yes
guest ok = no
write list = siteusr
writeable = yes
create mask = 0777
browseable = no
security mask = 0777
directory security mask = 0777

Note that the drive is mapped as user siteusr. What I can do to open it up more?

View 5 Replies View Related

Fedora :: Config Automount Process To Put All My Usb Devices In Write-back Mode As Default

Oct 18, 2010

I am looking for info about how works automount process, and i didn't find info about the tollowing ...

I wonder ... how can i do to "config" automount process to put all my usb devices in write-back mode as default ... for example ... what file can i change? ... how to do it ?

And another one ... um... how to say to "automount process" ... to put my usb devices into a "deadline" io scheduler .. for example ... how to set io-scheduler for an automount device ?

View 1 Replies View Related

Debian :: Can Load System-config-samba Package Under Wheezy?

Mar 15, 2015

I really don't like GADMIN-SAMBA, and want to load the graphical tools I used previously on my homebrew Samba box I have at home (used to have Squeeze on it).

Have amd64 Debian 7.8 installed on a slimline HP Compaq PC ...

View 1 Replies View Related

Fedora Servers :: Config A Customer's Samba To Use A MS 2003 SBS For Auth

Mar 1, 2009

I'm trying to config a customer's samba server to use a MS 2003 SBS for auth. The samba is for file sharing only config'ed with disk quota's. Currently the samba is config'ed for auth = Users. But I want a central point for user auth, and since they already have the sbs in place, I'd like to use that.

View 1 Replies View Related

Fedora Servers :: Samba Config In Cui Mode With Command Basis?

Mar 26, 2009

how to config details of samba with commands not from gui

View 2 Replies View Related

OpenSUSE Network :: Samba Config For DHCP Client Laptop?

Jan 11, 2010

I'll try not to be too wordy. Want to get my openSUSE 11.2 (fresh install) laptop to see my network shares ...not to be a server or share any files. I've looked at 50 websites and everything seems to be "server" and "share" oriented. Maybe I (newb) am confused by the terminology...

I have a router that provides DHCP. My LAN PC's consist of a Vista laptop, an XP DAW, and a Kubuntu file server. Somehow I got Kubuntu configured properly, all of the Windows machines can access it and vice-versa. The Kubuntu smb.conf does not work on this laptop, and it seems overkill -no shares needed here. And yes, I get DHCP and interweb on the laptop -posted this with it.

All I want is access to my (other) network drives from this (openSUSE 11.2) laptop. Not a server, not to share. This is easy... right? It's driving me nuts Is there a Samba configuration that will let me jump onto networks and surf Windows/Samba shares like any old Windoze box browsing Network Neighborhood? Do I have to be a Samba guru?

View 7 Replies View Related

Networking :: Samba Config - Cannot Access Share On Home Network

Sep 1, 2010

I've used Samba for several years and when it works it's great. Unfortunately from time to time it seems to get messed up and either all the 7 machines on my home network can't be seen or I can't access the shares on some. I have 2 Windows XP computers 4 Kubuntu and one Linux Mint KDE, all the latest versions. I'd rather not plough through all the documentation for Samba, but would really like a "model" smb.conf with a few comments about parts that might have legitimate variants. I have researched this with Google searches many times but have failed to find the information I need in concise form.

View 4 Replies View Related

Server :: Samba Config - Can't Get The Public Read-write Dir To Work

Aug 21, 2010

I would like to set up three directories-

1) RW public directory
2) R-public, RW-me
3) Private dir (my /home/me)

BTW, I set all file permissions (recursively) to 777 until I can get this to work...

1) So far I have got 1 samba share working Read only with the following: [Music]

[Code]...

Guests can read it okay but user 'JoeBleaux' can't write to it...

2) I can't get the public read-write dir to work, again, it can be read by everyone but no one can write to it. Here's my broken config for this share: [Uploads]

[Code]...

3) I can't get the private dir to work. Here's my broken config for this share: [HomeDir]

[Code]...

View 4 Replies View Related

CentOS 5 :: Get System-config-samba To 'see' Winbind Users And Groups

Jul 14, 2009

I have a Samba File Server that can authenticate users in my Windows AD to log into the server. Anyways, I have a good amount of Windows Admins on staff but our org wants to cut budget so our first "slash" as it were is cutting down the actual Windows based File Servers.So my question is, now that I have this test server up and authenticating for logins using Windbind....is there a way I can get system-config-samba to "see" winbind users and groups so that file servers can still be "point and click" for my Windows Admins?

View 3 Replies View Related

Ubuntu :: Get Samba Back On Machine?

May 15, 2010

I recently upgraded from 9.04 to 9.10 and have been pulling my hair out because of it. I can't get samba 3 back on the machine. It has samba4 and it wont understand my smb.conf. All i want is samba3 back but thats not working.

View 1 Replies View Related

Ubuntu Networking :: System-config-samba Crashes - NameError: Global Name 'Error' Is Not Defined

May 27, 2010

When I run from the command line, I get this output:

Traceback (most recent call last):
File "/usr/sbin/system-config-samba", line 45, in <module>
mainWindow.MainWindow(debug_flag)
File "/usr/share/system-config-samba/mainWindow.py", line 82, in __init__

[code]....

I have removed and re-installed and get the same crash.

View 2 Replies View Related

Networking :: Windows 7 Users Can't Connect To Samba Server After Dhcp Config

Jun 27, 2011

I have an ubuntu 11,04 samba domain server, I want to also configure this machine to work as a dhcp server, however this have give me some issues with te windows 7 workstations, my guest is that it have something to do with the iptables because those station do join the samba domain went both server and workstation are conected to a router.

This is the script I use at boot

Code:

#FOR SHARED INTERNET
/sbin/iptables -P FORWARD ACCEPT
/sbin/iptables --table nat -A POSTROUTING -o eth2 -j MASQUERADE

[code]....

I haven't test it with windows xp station but I have use the same code in the past with no problems, and since this is my first time joining windows 7 station i belive there must be some other port that need fowarding.

View 3 Replies View Related

General :: New REHL Install Default Samba Config - Invalid Users

Mar 16, 2011

I'm comparing a RHEL4 samba server's config to a new RHEL install with a default samba config. On the old one I see that there is a line saying

invalid users = root bin daemon adm sync shutdown halt mail news operator

On the new default install I don't even see where it mentions the invalid users option in the notes. Does it do that by default now or something?

View 3 Replies View Related

Server :: Some Options In System-config-samba Dialog Are Not Working Properly?

Apr 13, 2010

I am using Fedora 12. I have the following problem, when i working with system-config-samba dialog:I add the new user on the server:as following:

Unix username: vova
Windows username:test

As described in Customisation Guide for Red Hat 9: "If the user has a different username on a Windows machine and will be logging into the Samba serverfrom the Windows machine, specify that Windows username in the Windows Username field."So i logged from the Windows machine not under test(Windows username) but under vova.And i logged in without the problem. However it seems that samba should check windows username=test (as have written in samba-config) and ask an password for different users. And additionally, if samba check the currect user in Windows itself and verify it with Unix user, what for we need write the Windows username in samba config? I don't understand

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved